summaryrefslogtreecommitdiff
path: root/arch/mips/alchemy
AgeCommit message (Collapse)Author
2012-10-11MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code.Manuel Lauss
The PB1100/1500 are similar to their DB-cousins but with a few more devices on the bus. This patch adds PB1100/1500 support to the existing DB1100/1500 code. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: lnux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: Alchemy: merge PB1550 support into DB1550 codeManuel Lauss
The PB1550 is more or less a DB1550 without the PCI IDE controller, a more complicated (read: configurable) Flash setup and some other minor changes. Like the DB1550 it can be automatically detected by reading the CPLD ID register bits. This patch adds PB1550 detection and setup to the DB1550 code. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: Alchemy: Single kernel for DB1200/1300/1550Manuel Lauss
Combine support for the DB1200/PB1200, DB1300 and DB1550 boards into a single kernel image. defconfig-generated image verified on DB1200, DB1300 and DB1550. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4335/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-17MIPS: MTX-1: Add udelay to mtx1_pci_idselBruno Randolf
Without this udelay(1) PCI idsel does not work correctly on the "singleboard" (T-Mobile Surfbox) for the MiniPCI device. The result is that PCI configuration fails and the MiniPCI card is not detected correctly. Instead of PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] pci 0000:00:03.0: BAR 0: assigned [mem 0x40000000-0x4000ffff] pci 0000:00:00.0: BAR 0: assigned [mem 0x40010000-0x40010fff] pci 0000:00:00.1: BAR 0: assigned [mem 0x40011000-0x40011fff] We see only the CardBus device: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x40000fff] pci 0000:00:00.1: BAR 0: assigned [mem 0x40001000-0x40001fff] Later the device driver shows this error: ath5k 0000:00:03.0: cannot remap PCI memory region ath5k: probe of 0000:00:03.0 failed with error -5 I assume that the logic chip which usually supresses the signal to the CardBus card has some settling time and without the delay it would still let the Cardbus interfere with the response from the MiniPCI card. What I cannot explain is why this behaviour shows up now and not in earlier kernel versions before. Maybe older PCI code was slower? Signed-off-by: Bruno Randolf <br1@einfach.org> Cc: linux-mips@linux-mips.org Cc: manuel.lauss@googlemail.com Cc: florian@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/4087/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-25Merge branches 'next/generic', 'next/alchemy', 'next/bcm63xx', ↵Ralf Baechle
'next/cavium', 'next/jz4740', 'next/lantiq', 'next/loongson1b' and 'next/netlogic' into mips-for-linux-next
2012-07-23MIPS: Alchemy: Use kmemdup rather than duplicating its implementationThomas Meyer
The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/3058/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Alchemy: use IS_ENABLED() macroFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3331/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Alchemy: handle db1200 cpld ints as they come inManuel Lauss
Remove the loop in the cascade handler and instead unconditionally handle just the first set interrupt coming from the CPLD. This gets rid of a lot of spurious interrupts being triggered for the SMSC91111 ethernet chip especially under high(er) IDE load: "eth0: spurious interrupt (mask = 0xb3)" Verified on DB1200 and DB1300. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3288/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Alchemy: devboards: kill prom.cManuel Lauss
move contents to already existing platform.c file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3287/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Alchemy: use 64MB RAM as minimum for devboardsManuel Lauss
YAMON on all devboards provides the "memsize" envvar; in the unlikely case that it can't be parsed just assume 64MB, which all boards have at least. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3286/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-06-01Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull mtd update from David Woodhouse: - More robust parsing especially of xattr data in JFFS2 - Updates to mxc_nand and gpmi drivers to support new boards and device tree - Improve consistency of information about ECC strength in NAND devices - Clean up partition handling of plat_nand - Support NAND drivers without dedicated access to OOB area - BCH hardware ECC support for OMAP - Other fixes and cleanups, and a few new device IDs Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to added include files next to each other. * tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits) mtd: mxc_nand: move ecc strengh setup before nand_scan_tail mtd: block2mtd: fix recursive call of mtd_writev mtd: gpmi-nand: define ecc.strength mtd: of_parts: fix breakage in Kconfig mtd: nand: fix scan_read_raw_oob mtd: docg3 fix in-middle of blocks reads mtd: cfi_cmdset_0002: Slight cleanup of fixup messages mtd: add fixup for S29NS512P NOR flash. jffs2: allow to complete xattr integrity check on first GC scan jffs2: allow to discriminate between recoverable and non-recoverable errors mtd: nand: omap: add support for hardware BCH ecc ARM: OMAP3: gpmc: add BCH ecc api and modes mtd: nand: check the return code of 'read_oob/read_oob_raw' mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' mtd: m25p80: Add support for Winbond W25Q80BW jffs2: get rid of jffs2_sync_super jffs2: remove unnecessary GC pass on sync jffs2: remove unnecessary GC pass on umount jffs2: remove lock_super mtd: gpmi: add gpmi support for mx6q ...
2012-05-15MIPS: Fix several implicit uses of export.h/module.hPaul Gortmaker
These will show up as a build failure once we clean up a misuse of module.h in the mips termios header. Uses export.h: (EXPORT_SYMBOL) arch/mips/cavium-octeon/setup.c arch/mips/pmc-sierra/yosemite/setup.c arch/mips/rb532/devices.c arch/mips/sni/setup.c Uses module.h: (symbol_get/put) arch/mips/alchemy/devboards/db1200.c Uses module.h: (print_modules) arch/mips/kernel/traps.c Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3448/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-05-14mips: Use the plat_nand default partition parserH Hartley Sweeten
Use the default partition parser, cmdlinepart, provided by the plat_nand driver. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-02-20MIPS: Alchemy: Increase minimum timeout for 32kHz timer.Manuel Lauss
Since a clocksource change post 3.2-rc1, tasks on my DB1500 board hang after random amounts of time (from a few minutes to a few hours), regardless of load. Debugging showed that the compare-match register value is a few seconds lower than the current counter value. The minimum value of 8 was initialy determined by a trial-and-error approach. Currently it is sufficient for all Alchemys (without PCI apparently), independent of CPU clock; only the DB1500 and DB1550 boards experience these timer-related tasks hangs now. This patch increases the minimum timeout by 1 (to 9 counter ticks) which seems sufficient since the systems are still working perfectly fine after over 24 hours. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3214/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-01-11Merge branch 'next/alchemy' into mips-for-linux-nextRalf Baechle
2011-12-08MIPS: Alchemy: db1200: Improve PB1200 detection.Manuel Lauss
The PB1200 has the CPLD located at an address which on the DB1200 is RAM; reading the Board-ID sometimes results in a PB1200 being detected instead (especially during reboots after long uptimes). On the other hand, the address of the DB1200's CPLD is hosting Flash chips on the PB1200. Test for the DB1200 first and additionally do a quick write-test to the hexleds register to make sure we're writing to the CPLD. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3005/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code.Manuel Lauss
With a generic plat_irq_dispatch (for Alchemy at least) code for both interrupt controller types can coexist in a single kernel image and be autodetected at runtime. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2935/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controllerManuel Lauss
IC and GPIC are now chain handlers of the traditional MIPS IRQ controller. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2933/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Alchemy: irq: register pm at irq init timeManuel Lauss
No need for a device_initcall. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2934/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Alchemy: Touchscreen support on DB1100Manuel Lauss
Wire up the ADS7846 touchscreen controller on the DB1100. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2879/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Alchemy: Hook up IrDA on DB1000/DB1100Manuel Lauss
Add necessary transceiver control platform data and hook up the IrDA peripheral on the DB1000 and DB1100 boards. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2878/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MIPS: Alchemy: remove unused board headersManuel Lauss
The information in those headers is no longer necessary. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2876/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-08MTD: nand: make au1550nd.c a platform_driverManuel Lauss
Transform the au1550nd.c driver into a platform_driver and hook it up in the PB1550 board (gen_nand works fine on the DB1550, but since I don't have a PB1550 to test this driver stays for now). Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mtd@lists.infradead.org To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2875/ Patchwork: https://patchwork.linux-mips.org/patch/3160/ Acked-by: Artem Bityutskiy <dedekind1@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: irq: Remove IRQF_DISABLEDYong Zhang
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. [ralf@linux-mips.org: Fixed up conflicts in arch/mips/alchemy/common/dbdma.c, arch/mips/cavium-octeon/smp.c and arch/mips/kernel/perf_event.c.] Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> To: linux-kernel@vger.kernel.org Cc: tglx@linutronix.de linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2835/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Add RTC device to all devboardsManuel Lauss
All Devboards can use the 32kHz counter as a RTC device. Also delete the custom CMOS RTC header, which can be used for the DS1693 on the PB1500. But since it doesn't have a buffer battery it is as useful as the on-chip RTC which I prefer. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2874/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: MMC for DB1100Manuel Lauss
This patch hooks up the 2 MMC sockets on the DB1100 board. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2873/ Patchwork: https://patchwork.linux-mips.org/patch/2920/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: one kernel for DB1000/DB1500/DB1100Manuel Lauss
These 3 boards are very similar; with this patch a single kernel image which runs on all three can be built. Tested on DB1500 and DB1100. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2872/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Merge PB1200 support into DB1200 code.Manuel Lauss
The PB1200 is basically a DB1200 with additional MMC and camera sockets and different base addresses for external hardware (CPLD, IDE, Net, NAND). This patch implements the missing PB1200 features in DB1200 support code and runtime board detection. Tested on DB1200 only. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2880/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: move au1200fb global functions to platform dataManuel Lauss
au1200fb calls 3 functions which have to be defined in board code. Fix this ugliness with the introduction of platform_data. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-fbdev@vger.kernel.org To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2871/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: merge devboard code into single per-board files.Manuel Lauss
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2884/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: merge GPR/MTX-1/XXS1500 board code into single filesManuel Lauss
Most of these files are have more comments than real code; merge them all into single board-<name>.c files. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2869/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Improved DB1550 support, with audio and serial busses.Manuel Lauss
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2868/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Basic support for the DB1300 board.Manuel Lauss
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2867/ Patchwork: https://patchwork.linux-mips.org/patch/2919/ Patchwork: https://patchwork.linux-mips.org/patch/2928/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Au1300 SoC supportManuel Lauss
Add basic support for the Au1300 variant(s): - New GPIO/Interrupt controller - DBDMA ids - USB setup - MMC support - enable various PSC drivers - detection code. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2866/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: devboards: remove unneeded BCSR IRQ reg accManuel Lauss
Initially I had to write to both the MASK and ENABLE registers, otherwise the CPLD would generate tons of spurious interrupts. With the change to the demux handler to disable the muxed line, it is now sufficient to disable the interrupt by writing either the enable or mask register. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2865/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: Drop MIRAGE/BOSPORUS board supportManuel Lauss
No test hardware and no (apparent) users. These boards seem very similar to the DB1500, so if required support can be brought back again (I have datasheets) but then with dedicated board code, not tacked on to DB1000 support. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2864/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Alchemy: remove PB1000 supportManuel Lauss
Noone seems to have test hardware or care anymore. Drop PB1000 support and along with it the old Alchemy PCMCIA socket driver. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Cc: linux-pcmcia@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/2881/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
2011-10-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits) ALSA: hda - Fix ADC input-amp handling for Cx20549 codec ALSA: hda - Keep EAPD turned on for old Conexant chips ALSA: hda/realtek - Fix missing volume controls with ALC260 ASoC: wm8940: Properly set codec->dapm.bias_level ALSA: hda - Fix pin-config for ASUS W90V ALSA: hda - Fix surround/CLFE headphone and speaker pins order ALSA: hda - Fix typo ALSA: Update the sound git tree URL ALSA: HDA: Add new revision for ALC662 ASoC: max98095: Convert codec->hw_write to snd_soc_write ASoC: keep pointer to resource so it can be freed ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2 ASoC: da7210: Add support for line out and DAC ASoC: da7210: Add support for DAPM ALSA: hda/realtek - Fix DAC assignments of multiple speakers ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value ASoC: Set sgtl5000->ldo in ldo_regulator_register ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture ...
2011-10-24MIPS: Alchemy: remove all CONFIG_SOC_AU1??? definesManuel Lauss
Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols, it's time to get rid of them: Move some of the platform devices to the boards which can use them, Rename a few (unused) constants in the header, Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally delete them altogether from the Alchemy Kconfig file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: kill au1xxx.h headerManuel Lauss
No longer required Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx.h
2011-10-24MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? definesManuel Lauss
This patch gets rid of all CONFIG_SOC_AU1XXX defines in DMA/DBDMA-related code. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2704/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header depManuel Lauss
au1xxx-ide uses defines from the pb1200/db1200 headers: get DBDMA ID through platform resource information, hardcode register spacing. The only 2 users of this driver (and the only boards it can really work on realiably) use the same register layout. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-ide@vger.kernel.org To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-ide@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Patchwork: https://patchwork.linux-mips.org/patch/2716/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: Redo PCI as platform driverManuel Lauss
- Rewrite Alchemy PCI support as a platform driver. - Fixup boards which have PCI. Run-tested on DB1500 and DB1550. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2706/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/pci.c delete mode 100644 arch/mips/pci/fixup-au1000.c delete mode 100644 arch/mips/pci/ops-au1000.c create mode 100644 arch/mips/pci/pci-alchemy.c
2011-10-24MIPS: Alchemy: more base address cleanupManuel Lauss
remove all redundant peripheral base address defines, fix all affected boards and drivers. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2700/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: rewrite USB platform setup.Manuel Lauss
Use runtime CPU detection to setup all USB parts. Remove the Au1200 OTG and UDC platform devices since there are no drivers for them anyway. Clean up the USB address mess in the au1000 header. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2703/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: abstract USB block control register accessManuel Lauss
Alchemy chips have one or more registers which control access to the usb blocks as well as PHY configuration. I don't want the OHCI/EHCI glues to know about the different registers and bits; new code hides the gory details of USB configuration from them. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-usb@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Patchwork: https://patchwork.linux-mips.org/patch/2709/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 drivers/usb/host/alchemy-common.c
2011-10-24MIPS: Alchemy: support multiple GPIO styles in one kernelManuel Lauss
For GPIOLIB=y decide at runtime which gpiochips to register; in the GPIOLIB=n case, the gpio headers need to be reshuffled a bit to make multiple implementations coexist peacefully. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2679/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: Always build power codeManuel Lauss
No reason NOT to build it Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2678/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24NET: au1000_eth: Pass MACDMA address through platform resource info.Manuel Lauss
This patch removes the last hardcoded base address from the au1000_eth driver. The base address of the MACDMA unit was derived from the platform device id; if someone registered the MACs in inverse order both would not work. So instead pass the base address of the DMA unit to the driver with the other platform resource information. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Acked-by: David S. Miller <davem@davemloft.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2674/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>