summaryrefslogtreecommitdiff
path: root/arch/mips/include/asm/mipsregs.h
AgeCommit message (Collapse)Author
2013-05-09MIPS: microMIPS: Add support for exception handling.Steven J. Hill
All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-01MIPS: microMIPS: Add instruction utility macros.Steven J. Hill
Add two new macros for microMIPS. One checks if an exception was taken in either microMIPS or classic MIPS mode. The other checks if a microMIPS instruction is 16-bit or 32-bit in length. [ralf@linux-mips.org: Removed unnecessary parenthesis as noted by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>] Signed-off-by: Steven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: kevink@paralogos.com Cc: ddaney.cavm@gmail.com Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Patchwork: https://patchwork.linux-mips.org/patch/4924/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> (cherry picked from commit 49df26472338b935fd5781bf94a77a88b148a716)
2013-03-19MIPS: Fix code generation for non-DSP capable CPUsFlorian Fainelli
Commit 32a7ede (MIPS: dsp: Add assembler support for DSP ASEs) has enabled the use of DSP ASE specific instructions such as rddsp and wrdsp under the idea that all code path that will make use of these two instructions are properly checking for cpu_has_dsp to ensure that the particular CPU we are running on *actually* supports DSP ASE. This commit actually causes the following oops on QEMU Malta emulating a MIPS 24Kc without the DSP ASE implemented: [ 7.960000] Reserved instruction in kernel [ 7.960000] Cpu 0 [ 7.960000] $ 0 : 00000000 00000000 00000014 00000005 [ 7.960000] $ 4 : 8fc2de48 00000001 00000000 8f59ddb0 [ 7.960000] $ 8 : 8f5ceec4 00000018 00000c00 00800000 [ 7.960000] $12 : 00000100 00000200 00000000 00457b84 [ 7.960000] $16 : 00000000 8fc2ba78 8f4ec980 00000001 [ 7.960000] $20 : 80418f90 00000000 00000000 000002dd [ 7.960000] $24 : 0000009c 7730d7b8 [ 7.960000] $28 : 8f59c000 8f59dd38 00000001 80104248 [ 7.960000] Hi : 0000001d [ 7.960000] Lo : 0000000b [ 7.960000] epc : 801041ec thread_saved_pc+0x2c/0x38 [ 7.960000] Not tainted [ 7.960000] ra : 80104248 get_wchan+0x48/0xac [ 7.960000] Status: 1000b703 KERNEL EXL IE [ 7.960000] Cause : 10800028 [ 7.960000] PrId : 00019300 (MIPS 24Kc) [ 7.960000] Modules linked in: [ 7.960000] Process killall (pid: 1574, threadinfo=8f59c000, task=8fd14558, tls=773aa440) [ 7.960000] Stack : 8fc2ba78 8012b008 0000000c 0000001d 00000000 00000000 8f58a380 8f58a380 8fc2ba78 80202668 8f59de78 8f468600 8f59de28 801b2a3c 8f59df00 8f98ba20 74696e69 8f468600 8f59de28 801b7308 0081c007 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8fc2bbb4 00000001 0000001d 0000000b 77f038cc 7fe80648 ffffffff ffffffff 00000000 00000001 0016e000 00000000 ... [ 7.960000] Call Trace: [ 7.960000] [<801041ec>] thread_saved_pc+0x2c/0x38 [ 7.960000] [<80104248>] get_wchan+0x48/0xac The disassembly of thread_saved_pc points to the following: 000006d0 <thread_saved_pc>: 6d0: 8c820208 lw v0,520(a0) 6d4: 3c030000 lui v1,0x0 6d8: 24630000 addiu v1,v1,0 6dc: 10430008 beq v0,v1,700 <thread_saved_pc+0x30> 6e0: 00000000 nop 6e4: 3c020000 lui v0,0x0 6e8: 8c43000c lw v1,12(v0) 6ec: 04620004 bltzl v1,700 <thread_saved_pc+0x30> 6f0: 00001021 move v0,zero 6f4: 8c840200 lw a0,512(a0) 6f8: 00031080 sll v0,v1,0x2 6fc: 7c44100a lwx v0,a0(v0) <------------ 700: 03e00008 jr ra 704: 00000000 nop If we specifically disable -mdsp/-mdspr2 for arch/mips/kernel/process.o, we get the following (non-crashing) assembly: 00000708 <thread_saved_pc>: 708: 8c820208 lw v0,520(a0) 70c: 3c030000 lui v1,0x0 710: 24630000 addiu v1,v1,0 714: 10430009 beq v0,v1,73c <thread_saved_pc+0x34> 718: 00000000 nop 71c: 3c020000 lui v0,0x0 720: 8c42000c lw v0,12(v0) 724: 04420005 bltzl v0,73c <thread_saved_pc+0x34> 728: 00001021 move v0,zero 72c: 8c830200 lw v1,512(a0) 730: 00021080 sll v0,v0,0x2 734: 00431021 addu v0,v0,v1 738: 8c420000 lw v0,0(v0) 73c: 03e00008 jr ra 740: 00000000 nop The specific line that leads a different assembly being produced is: unsigned long thread_saved_pc(struct task_struct *tsk) ... return ((unsigned long *)t->reg29)[schedule_mfi.pc_offset]; <--- The problem here is that the compiler was given the right to use DSP instructions with the -mdsp / -mdspr2 command-line switches and performed some optimization for us and used DSP ASE instructions where we are not checking that the running CPU actually supports DSP ASE. This patch fixes the issue by partially reverting commit 32a7ede for arch/mips/kernel/Makefile in order to remove the -mdsp / -mdspr2 compiler command-line switches such that we are now guaranteed that the compiler will not optimize using DSP ASE reserved instructions. We also need to fixup the rddsp/wrdsp and m{t,h}{hi,lo}{0,1,2,3} macros in arch/mips/include/asm/mipsregs.h to tell the assembler that we are going to explicitely use DSP ASE reserved instructions. The comment in arch/mips/kernel/Makefile is also updated to reflect that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-21Merge branch 'mips-next-3.9' of ↵Ralf Baechle
git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-next
2013-02-19MIPS: Probe for and report hardware virtualization support.David Daney
The presence of the MIPS Virtualization Application-Specific Extension is indicated by CP0_Config3[23]. Probe for this and report it in /proc/cpuinfo. Signed-off-by: David Daney <david.daney@cavium.com> Patchwork: http://patchwork.linux-mips.org/patch/4904/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-16MIPS: dsp: Simplify the DSP macros.Steven J. Hill
Simplify the DSP macros for vanilla (non-microMIPS) kernels and toolchains that do not support the DSP ASEs. Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4687/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-16MIPS: dsp: Support toolchains without DSP ASE and microMIPS.Steven J. Hill
Add macros to support the DSP ASE with microMIPS kernels when the toolchain does not have support. Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4686/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-16MIPS: dsp: Add assembler support for DSP ASEs.Steven J. Hill
Newer toolchains support the DSP and DSP Rev2 instructions. This patch performs a check for that support and adds compiler and assembler flags for only the files that need use those instructions. Signed-off-by: Steven J. Hill <sjhill@mips.com> Acked-by: Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4752/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-16MIPS: Add support for the M14KEc core.Steven J. Hill
Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4682/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-01MIPS: Whitespace cleanups and reformatting.Steven J. Hill
Signed-off-by: Steven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Cc: Steven J. Hill <sjhill@mips.com> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/4781/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-13MIPS: PMC-Sierra Yosemite: Remove support.Ralf Baechle
Nobody seems to be interested anymore and upstream also never had an ethernet driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-12MIPS: Control huge tlb support via Kconfig symbol MIPS_HUGE_TLB_SUPPORTDavid Daney
We need Huge TLBs for HUGETLB_PAGE, or the soon to follow TRANSPARENT_HUGEPAGE. collect this information under a single Kconfig symbol. Signed-off-by: David Daney <david.daney@cavium.com>
2012-10-11MIPS: Add detection of DSP ASE Revision 2.Steven J. Hill
[ralf@linux-mips.org: This patch really only detects the ASE and passes its existence on to userland via /proc/cpuinfo. The DSP ASE Rev 2. adds new resources but no resources that would need management by the kernel.] Signed-off-by: Steven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4165/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt)Al Cooper
The PCI (Program Counter Interrupt) bit in the "cause" register is mandatory for MIPS32R2 cores, but has also been added to some R1 cores (BMIPS5000). This change adds a cpu feature bit to make it easier to check for and use this feature. Signed-off-by: Al Cooper <alcooperx@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4106/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-09-28Merge branch 'ralf-3.7' of ↵Ralf Baechle
git://git.linux-mips.org/pub/scm/sjhill/linux-sjhill into mips-for-linux-next
2012-09-13MIPS: Add base architecture support for RI and XI.Steven J. Hill
Originally both Read Inhibit (RI) and Execute Inhibit (XI) were supported by the TLB only for a SmartMIPS core. The MIPSr3(TM) Architecture now defines an optional feature to implement these TLB bits separately. Support for one or both features can be checked by looking at the Config3.RXI bit. Signed-off-by: Steven J. Hill <sjhill@mips.com> Acked-by: David Daney <david.daney@cavium.com>
2012-09-13MIPS: Add support for the 1074K core.Steven J. Hill
Signed-off-by: Steven J. Hill <sjhill@mips.com>
2011-12-07MIPS: BMIPS: Add set/clear CP0 macros for BMIPS operationsKevin Cernekee
Several BMIPS-specific CP0 registers are used for SMP boot and other operations. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2956/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Add accessor macros for 64-bit performance counter registers.David Daney
Signed-off-by: David Daney <david.daney@cavium.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2789/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-10-29MIPS: Add BMIPS CP0 register definitionsKevin Cernekee
Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: mbizon@freebox.fr Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Tested-by: Florian Fainelli <ffainelli@freebox.fr> Patchwork: https://patchwork.linux-mips.org/patch/1708/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2010-08-05MIPS: Define ST0_NMI in asm/mipsregs.hDavid Daney
This is used by the forthcoming OCTEON watchdog patch. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: wim@iguana.be Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1498/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-15 MIPS FPU emulator: allow Cause bits of FCSR to be writeable by ctc1Shane McDonald
In the FPU emulator code of the MIPS, the Cause bits of the FCSR register are not currently writeable by the ctc1 instruction. In odd corner cases, this can cause problems. For example, a case existed where a divide-by-zero exception was generated by the FPU, and the signal handler attempted to restore the FPU registers to their state before the exception occurred. In this particular setup, writing the old value to the FCSR register would cause another divide-by-zero exception to occur immediately. The solution is to change the ctc1 instruction emulator code to allow the Cause bits of the FCSR register to be writeable. This is the behaviour of the hardware that the code is emulating. This problem was found by Shane McDonald, but the credit for the fix goes to Kevin Kissell. In Kevin's words: I submit that the bug is indeed in that ctc_op: case of the emulator. The Cause bits (17:12) are supposed to be writable by that instruction, but the CTC1 emulation won't let them be updated by the instruction. I think that actually if you just completely removed lines 387-388 [...] things would work a good deal better. At least, it would be a more accurate emulation of the architecturally defined FPU. If I wanted to be really, really pedantic (which I sometimes do), I'd also protect the reserved bits that aren't necessarily writable. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> To: anemo@mba.ocn.ne.jp To: kevink@paralogos.com To: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/1205/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-02-27MIPS: Add accessor functions and bit definitions for c0_PageGrainDavid Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/950/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Decode c0_config4 for large TLBs.David Daney
For processors that have more than 64 TLBs, we need to decode both config1 and config4 to determine the total number TLBs. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/866/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-27MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQsDavid VomLehn
The MIPS processor is limited to 64 external interrupt sources. Using a greater number without IRQ sharing requires reading platform-specific registers. On such platforms, reading the IntCtl register to determine which interrupt corresponds to a timer interrupt will not work. On MIPSR2 systems there is a solution - the TI bit in the Cause register, specifically indicates that a timer interrupt has occured. This patch uses that bit to detect interrupts for MIPSR2 processors, which may be expected to work regardless of how the timer interrupt may be routed in the hardware. Signed-off-by: David VomLehn (dvomlehn@cisco.com) To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17MIPS: Add hugetlbfs page defines.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: Fix sign-extension bug in 32-bit kernel on 32-bit hardware.Ralf Baechle
Probably nobody does arithmetic on cp0 register values so this has never bitten. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-14MIPS: Cavium: Add support for 8k and 32k page sizes.Ralf Baechle
Beyond the requirements of the architecture standard Cavium also supports 8k and 32k pages. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: David Daney <ddaney@caviumnetworks.com>
2009-05-14MIPS: SMTC: Bring set/clear/change_c0_## return value semantics uptodate.Kevin D. Kissell
Signed-off-by: Kevin D. Kissell <kevink@paralogos.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-03-23MIPS: Change {set,clear,change}_c0_<foo> to return old value.Ralf Baechle
This is more standard and useful and need for the following fix to work correctly. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Override assembler target architecture for octeon.David Daney
Gas from binutils 2.19 fails to compile some cop1 instructions with -march=octeon. Since the cop1 instructions are present in mips1, use that arch instead. This will be fixed in binutils 2.20. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON specific register definitions to mipsregs.hDavid Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processorsShinya Kuribayashi
We already have sufficient infrastructure to support VR5500 and VR5500A series processors. Here's a Makefile support to make it selectable by ports, and enable it for NEC EMMA2RH Markeins board. This patch also fixes a confused target help, and adds 1Gb PageMask bits supported by VR5500 and its variants. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Move headfiles to new location below arch/mips/includeRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v0.10.2 at 2024-10-08 15:56:50 (GMT)