summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2012-09-05powerpc: Don't use __put_user() in patch_instructionBenjamin Herrenschmidt
patch_instruction() can be called very early on ppc32, when the kernel isn't yet running at it's linked address. That can cause the ! is_kernel_addr() test in __put_user() to trip and call might_sleep() which is very bad at that point during boot. Use a lower level function instead for now, at least until we get to rework ppc32 boot process to do the code patching later, like ppc64 does. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Make sure IPI handlers see data written by IPI sendersPaul Mackerras
We have been observing hangs, both of KVM guest vcpu tasks and more generally, where a process that is woken doesn't properly wake up and continue to run, but instead sticks in TASK_WAKING state. This happens because the update of rq->wake_list in ttwu_queue_remote() is not ordered with the update of ipi_message in smp_muxed_ipi_message_pass(), and the reading of rq->wake_list in scheduler_ipi() is not ordered with the reading of ipi_message in smp_ipi_demux(). Thus it is possible for the IPI receiver not to see the updated rq->wake_list and therefore conclude that there is nothing for it to do. In order to make sure that anything done before smp_send_reschedule() is ordered before anything done in the resulting call to scheduler_ipi(), this adds barriers in smp_muxed_message_pass() and smp_ipi_demux(). The barrier in smp_muxed_message_pass() is a full barrier to ensure that there is a full ordering between the smp_send_reschedule() caller and scheduler_ipi(). In smp_ipi_demux(), we use xchg() rather than xchg_local() because xchg() includes release and acquire barriers. Using xchg() rather than xchg_local() makes sense given that ipi_message is not just accessed locally. This moves the barrier between setting the message and calling the cause_ipi() function into the individual cause_ipi implementations. Most of them -- those that used outb, out_8 or similar -- already had a full barrier because out_8 etc. include a sync before the MMIO store. This adds an explicit barrier in the two remaining cases. These changes made no measurable difference to the speed of IPIs as measured using a simple ping-pong latency test across two CPUs on different cores of a POWER7 machine. The analysis of the reason why processes were not waking up properly is due to Milton Miller. Cc: stable@vger.kernel.org # v3.0+ Reported-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Restore correct DSCR in context switchAnton Blanchard
During a context switch we always restore the per thread DSCR value. If we aren't doing explicit DSCR management (ie thread.dscr_inherit == 0) and the default DSCR changed while the process has been sleeping we end up with the wrong value. Check thread.dscr_inherit and select the default DSCR or per thread DSCR as required. This was found with the following test case, when running with more threads than CPUs (ie forcing context switching): http://ozlabs.org/~anton/junkcode/dscr_default_test.c With the four patches applied I can run a combination of all test cases successfully at the same time: http://ozlabs.org/~anton/junkcode/dscr_default_test.c http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Fix DSCR inheritance in copy_thread()Anton Blanchard
If the default DSCR is non zero we set thread.dscr_inherit in copy_thread() meaning the new thread and all its children will ignore future updates to the default DSCR. This is not intended and is a change in behaviour that a number of our users have hit. We just need to inherit thread.dscr and thread.dscr_inherit from the parent which ends up being much simpler. This was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_default_test.c Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Keep thread.dscr and thread.dscr_inherit in syncAnton Blanchard
When we update the DSCR either via emulation of mtspr(DSCR) or via a change to dscr_default in sysfs we don't update thread.dscr. We will eventually update it at context switch time but there is a period where thread.dscr is incorrect. If we fork at this point we will copy the old value of thread.dscr into the child. To avoid this, always keep thread.dscr in sync with reality. This issue was found with the following testcase: http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Update DSCR on all CPUs when writing sysfs dscr_defaultAnton Blanchard
Writing to dscr_default in sysfs doesn't actually change the DSCR - we rely on a context switch on each CPU to do the work. There is no guarantee we will get a context switch in a reasonable amount of time so fire off an IPI to force an immediate change. This issue was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc/powernv: Always go into nap mode when CPU is offlinePaul Mackerras
The CPU hotplug code for the powernv platform currently only puts offline CPUs into nap mode if the powersave_nap variable is set. However, HV-style KVM on this platform requires secondary CPU threads to be offline and in nap mode. Since we know nap mode works just fine on all POWER7 machines, and the only machines that support the powernv platform are POWER7 machines, this changes the code to always put offline CPUs into nap mode, regardless of powersave_nap. Powersave_nap still controls whether or not CPUs go into nap mode when idle, as before. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Give hypervisor decrementer interrupts their own handlerPaul Mackerras
At the moment the handler for hypervisor decrementer interrupts is the same as for decrementer interrupts, i.e. timer_interrupt(). This is bogus; if we ever do get a hypervisor decrementer interrupt it won't have anything to do with the next timer event. In fact the only time we get hypervisor decrementer interrupts is when one is left pending on exit from a KVM guest. When we get a hypervisor decrementer interrupt we don't need to do anything special to clear it, since they are edge-triggered on the transition of HDEC from 0 to -1. Thus this adds an empty handler function for them. We don't need to have them masked when interrupts are soft-disabled, so we use STD_EXCEPTION_HV instead of MASKABLE_EXCEPTION_HV. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc/vphn: Fix arch_update_cpu_topology() return valueJesse Larrew
arch_update_cpu_topology() should only return 1 when the topology has actually changed, and should return 0 otherwise. This patch fixes a potential bug where rebuild_sched_domains() would reinitialize the sched domains even when the topology hasn't changed. Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-26Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "I meant to sent that earlier but got swamped with other things, so here are some powerpc fixes for 3.6. A few regression fixes and some bug fixes that I deemed should still make it. There's a FSL update from Kumar with a bunch of defconfig updates along with a few embedded fixes. I also reverted my g5_defconfig update that I merged earlier as it was completely busted, not too sure what happened there, I'll do a new one later." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: Revert "powerpc: Update g5_defconfig" powerpc/perf: Use pmc_overflow() to detect rolled back events powerpc: Fix VMX in interrupt check in POWER7 copy loops powerpc: POWER7 copy_to_user/copy_from_user patch applied twice powerpc: Fix personality handling in ppc64_personality() powerpc/dma-iommu: Fix IOMMU window check powerpc: Remove unnecessary ifdefs powerpc/kgdb: Restore current_thread_info properly powerpc/kgdb: Bail out of KGDB when we've been triggered powerpc/kgdb: Do not set kgdb_single_step on ppc powerpc/mpic_msgr: Add missing includes powerpc: Fix null pointer deref in perf hardware breakpoints powerpc: Fixup whitespace in xmon powerpc: Fix xmon dl command for new printk implementation powerpc/fsl: fix "Failed to mount /dev: No such device" errors powerpc/fsl: update defconfigs booke/wdt: some ioctls do not return values properly powerpc/p4080ds: dts - add usb controller version info and port0 powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDS powerpc/fsl-pci: Only scan PCI bus if configured as a host
2012-08-24Revert "powerpc: Update g5_defconfig"Benjamin Herrenschmidt
This reverts commit b1acf1bb544cf28c1f4be0a45620fa899c74b7e9. Something went horribly wrong when I did savedefconfig, not sure what, but what's in there is busted so let's revert it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc/perf: Use pmc_overflow() to detect rolled back eventsSukadev Bhattiprolu
For certain speculative events on Power7, 'perf stat' reports far higher event count than 'perf record' for the same event. As described in following commit, a performance monitor exception is raised even when the the performance events are rolled back. commit 0837e3242c73566fc1c0196b4ec61779c25ffc93 Author: Anton Blanchard <anton@samba.org> Date: Wed Mar 9 14:38:42 2011 +1100 perf_event_interrupt() records an event only when an overflow occurs. But this check for overflow is a simple 'if (val < 0)'. Because the events are rolled back, this check for overflow fails and the event is not recorded. perf_event_interrupt() later uses pmc_overflow() to detect the overflow and resets the counters and the events are lost completely. To properly detect the overflow of rolled back events, use pmc_overflow() even when recording events. To reproduce: $ cat strcpy.c #include <stdio.h> #include <string.h> main() { char buf[256]; alarm(5); while(1) strcpy(buf, "string1"); } $ perf record -e r20014 ./strcpy $ perf report -n > report.1 $ perf stat -e r20014 > report.2 # Compare report.1 and report.2 Reported-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc: Fix VMX in interrupt check in POWER7 copy loopsAnton Blanchard
The enhanced prefetch hint patches corrupt the condition register that was used to check if we are in interrupt. Fix this by using cr1. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc: POWER7 copy_to_user/copy_from_user patch applied twiceAnton Blanchard
"powerpc: Use enhanced touch instructions in POWER7 copy_to_user/copy_from_user" was applied twice. Remove one. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc: Fix personality handling in ppc64_personality()Jiri Kosina
Directly comparing current->personality against PER_LINUX32 doesn't work in cases when any of the personality flags stored in the top three bytes are used. Directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes Use personality() macro to compare only PER_MASK bytes and make sure that we are setting only the bits that should be set, instead of overwriting the whole value. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc/dma-iommu: Fix IOMMU window checkAaro Koskinen
Checking for device mask to cover the whole IOMMU table is too strict. IOMMU allocators should handle mask constraint properly for each allocation. The patch enables to use old AirPort Extreme cards on PowerMacs with more than 1GB of memory; without the patch the driver init fails with: b43-pci-bridge 0001:01:01.0: Warning: IOMMU window too big for device mask b43-pci-bridge 0001:01:01.0: mask: 0x3fffffff, table end: 0x80000000 b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc: Remove unnecessary ifdefsMichael Neuling
Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc/kgdb: Restore current_thread_info properlyTiejun Chen
For powerpc BooKE and e200, singlestep is handled on the critical/dbg exception stack. This causes current_thread_info() to fail for kgdb internal, so previously We work around this issue by copying the thread_info from the kernel stack before calling kgdb_handle_exception, and copying it back afterwards. But actually we don't do this properly. We should backup current_thread_info then restore that when exit. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc/kgdb: Bail out of KGDB when we've been triggeredTiejun Chen
We need to skip a breakpoint exception when it occurs after a breakpoint has already been removed. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc/kgdb: Do not set kgdb_single_step on ppcTiejun Chen
The kgdb_single_step flag has the possibility to indefinitely hang the system on an SMP system. The x86 arch have the same problem, and that problem was fixed by commit 8097551d9ab9b9e3630(kgdb,x86: do not set kgdb_single_step on x86). This patch does the same behaviors as x86's patch. Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc/mpic_msgr: Add missing includesScott Wood
Add several #includes that mpic_msgr relies on being pulled implicitly, which only happens on certain configs. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Meador Inge <meador_inge@mentor.com> Cc: Jia Hongtao <B38951@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc: Fix null pointer deref in perf hardware breakpointsMichael Neuling
Currently if you are doing a global perf recording with hardware breakpoints (ie perf record -e mem:0xdeadbeef -a), you can oops with: Faulting instruction address: 0xc000000000738890 cpu 0xc: Vector: 300 (Data Access) at [c0000003f76af8d0] pc: c000000000738890: .hw_breakpoint_handler+0xa0/0x1e0 lr: c000000000738830: .hw_breakpoint_handler+0x40/0x1e0 sp: c0000003f76afb50 msr: 8000000000001032 dar: 6f0 dsisr: 42000000 current = 0xc0000003f765ac00 paca = 0xc00000000f262a00 softe: 0 irq_happened: 0x01 pid = 6810, comm = loop-read enter ? for help [c0000003f76afbe0] c00000000073cd04 .notifier_call_chain.isra.0+0x84/0xe0 [c0000003f76afc80] c00000000073cdbc .notify_die+0x3c/0x60 [c0000003f76afd20] c0000000000139f0 .do_dabr+0x40/0xf0 [c0000003f76afe30] c000000000005a9c handle_dabr_fault+0x14/0x48 --- Exception: 300 (Data Access) at 0000000010000480 SP (ff8679e0) is in userspace This is because we don't check to see if the break point is associated with task before we deference the task_struct pointer. This changes the update to use current. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc: Fixup whitespace in xmonMichael Ellerman
There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24powerpc: Fix xmon dl command for new printk implementationMichael Ellerman
Since the printk internals were reworked the xmon 'dl' command which dumps the content of __log_buf has stopped working. It is now a structured buffer, so just dumping it doesn't really work. Use the helpers added for kgdb to print out the content. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-23powerpc/fsl: fix "Failed to mount /dev: No such device" errorsKim Phillips
Yocto (Built by Poky 7.0) 1.2 root filesystems fail to boot, at least over nfs, with: Failed to mount /dev: No such device Configuring DEVTMPFS fixes it. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-23powerpc/fsl: update defconfigsKim Phillips
run make savedefconfig on fsl defconfigs. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-16ppc: e500_tlb memset clears nothingAlan Cox
Put the parameters the right way around Addresses https://bugzilla.kernel.org/show_bug.cgi?id=44031 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-08-16KVM: PPC: Add cache flush on page mapAlexander Graf
When we map a page that wasn't icache cleared before, do so when first mapping it in KVM using the same information bits as the Linux mapping logic. That way we are 100% sure that any page we map does not have stale entries in the icache. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-08-16KVM: PPC: Book3S HV: Fix incorrect branch in H_CEDE codePaul Mackerras
In handling the H_CEDE hypercall, if this vcpu has already been prodded (with the H_PROD hypercall, which Linux guests don't in fact use), we branch to a numeric label '1f'. Unfortunately there is another '1:' label before the one that we want to jump to. This fixes the problem by using a textual label, 'kvm_cede_prodded'. It also changes the label for another longish branch from '2:' to 'kvm_cede_exit' to avoid a possible future problem if code modifications add another numeric '2:' label in between. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-08-10powerpc/p4080ds: dts - add usb controller version info and port0Shengzhou Liu
Add the missing usb controller version info and port0, which is required during setup usb phy. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-10powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDSZhao Chenhui
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-03powerpc/fsl-pci: Only scan PCI bus if configured as a hostJia Hongtao
We change fsl_add_bridge to return -ENODEV if the controller is working in agent mode. Then check the return value of fsl_add_bridge to guarantee that only successfully added host bus will be scanned. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second vfs pile from Al Viro: "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the deadlock reproduced by xfstests 068), symlink and hardlink restriction patches, plus assorted cleanups and fixes. Note that another fsfreeze deadlock (emergency thaw one) is *not* dealt with - the series by Fernando conflicts a lot with Jan's, breaks userland ABI (FIFREEZE semantics gets changed) and trades the deadlock for massive vfsmount leak; this is going to be handled next cycle. There probably will be another pull request, but that stuff won't be in it." Fix up trivial conflicts due to unrelated changes next to each other in drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) delousing target_core_file a bit Documentation: Correct s_umount state for freeze_fs/unfreeze_fs fs: Remove old freezing mechanism ext2: Implement freezing btrfs: Convert to new freezing mechanism nilfs2: Convert to new freezing mechanism ntfs: Convert to new freezing mechanism fuse: Convert to new freezing mechanism gfs2: Convert to new freezing mechanism ocfs2: Convert to new freezing mechanism xfs: Convert to new freezing code ext4: Convert to new freezing mechanism fs: Protect write paths by sb_start_write - sb_end_write fs: Skip atime update on frozen filesystem fs: Add freezing handling to mnt_want_write() / mnt_drop_write() fs: Improve filesystem freezing handling switch the protection of percpu_counter list to spinlock nfsd: Push mnt_want_write() outside of i_mutex btrfs: Push mnt_want_write() outside of i_mutex fat: Push mnt_want_write() outside of i_mutex ...
2012-08-01Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull irqdomain changes from Grant Likely: "Round of refactoring and enhancements to irq_domain infrastructure. This series starts the process of simplifying irqdomain. The ultimate goal is to merge LEGACY, LINEAR and TREE mappings into a single system, but had to back off from that after some last minute bugs. Instead it mainly reorganizes the code and ensures that the reverse map gets populated when the irq is mapped instead of the first time it is looked up. Merging of the irq_domain types is deferred to v3.7 In other news, this series adds helpers for creating static mappings on a linear or tree mapping." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: irqdomain: Improve diagnostics when a domain mapping fails irqdomain: eliminate slow-path revmap lookups irqdomain: Fix irq_create_direct_mapping() to test irq_domain type. irqdomain: Eliminate dedicated radix lookup functions irqdomain: Support for static IRQ mapping and association. irqdomain: Always update revmap when setting up a virq irqdomain: Split disassociating code into separate function irq_domain: correct a minor wrong comment for linear revmap irq_domain: Standardise legacy/linear domain selection irqdomain: Make ops->map hook optional irqdomain: Remove unnecessary test for IRQ_DOMAIN_MAP_LEGACY irqdomain: Simple NUMA awareness. devicetree: add helper inline for retrieving a node's full name
2012-08-01Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge Andrew's second set of patches: - MM - a few random fixes - a couple of RTC leftovers * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits) rtc/rtc-88pm80x: remove unneed devm_kfree rtc/rtc-88pm80x: assign ret only when rtc_register_driver fails mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables tmpfs: distribute interleave better across nodes mm: remove redundant initialization mm: warn if pg_data_t isn't initialized with zero mips: zero out pg_data_t when it's allocated memcg: gix memory accounting scalability in shrink_page_list mm/sparse: remove index_init_lock mm/sparse: more checks on mem_section number mm/sparse: optimize sparse_index_alloc memcg: add mem_cgroup_from_css() helper memcg: further prevent OOM with too many dirty pages memcg: prevent OOM with too many dirty pages mm: mmu_notifier: fix freed page still mapped in secondary MMU mm: memcg: only check anon swapin page charges for swap cache mm: memcg: only check swap cache pages for repeated charging mm: memcg: split swapin charge function into private and public part mm: memcg: remove needless !mm fixup to init_mm when charging mm: memcg: remove unneeded shmem charge type ...
2012-08-01memcg: rename config variablesAndrew Morton
Sanity: CONFIG_CGROUP_MEM_RES_CTLR -> CONFIG_MEMCG CONFIG_CGROUP_MEM_RES_CTLR_SWAP -> CONFIG_MEMCG_SWAP CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED -> CONFIG_MEMCG_SWAP_ENABLED CONFIG_CGROUP_MEM_RES_CTLR_KMEM -> CONFIG_MEMCG_KMEM [mhocko@suse.cz: fix missed bits] Cc: Glauber Costa <glommer@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31powerpc/kvm/book3s_32: Fix MTMSR_EERI macroAlexander Graf
Commit b38c77d82e4 moved the MTMSR_EERI macro from the KVM code to generic ppc_asm.h code. However, while adding it in the headers for the ppc32 case, it missed out to remove the former definition in the KVM code. This patch fixes compilation on server type PPC32 targets with CONFIG_KVM enabled. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-31Merge remote-tracking branch 'kumar/merge' into mergeBenjamin Herrenschmidt
Kumar says: "A few patches that missed the initial 3.6 window. These are bug fixes at this point."
2012-07-31Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge Andrew's first set of patches: "Non-MM patches: - lots of misc bits - tree-wide have_clk() cleanups - quite a lot of printk tweaks. I draw your attention to "printk: convert the format for KERN_<LEVEL> to a 2 byte pattern" which looks a bit scary. But afaict it's solid. - backlight updates - lib/ feature work (notably the addition and use of memweight()) - checkpatch updates - rtc updates - nilfs updates - fatfs updates (partial, still waiting for acks) - kdump, proc, fork, IPC, sysctl, taskstats, pps, etc - new fault-injection feature work" * Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits) drivers/misc/lkdtm.c: fix missing allocation failure check lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table() fault-injection: add tool to run command with failslab or fail_page_alloc fault-injection: add selftests for cpu and memory hotplug powerpc: pSeries reconfig notifier error injection module memory: memory notifier error injection module PM: PM notifier error injection module cpu: rewrite cpu-notifier-error-inject module fault-injection: notifier error injection c/r: fcntl: add F_GETOWNER_UIDS option resource: make sure requested range is included in the root range include/linux/aio.h: cpp->C conversions fs: cachefiles: add support for large files in filesystem caching pps: return PTR_ERR on error in device_create taskstats: check nla_reserve() return sysctl: suppress kmemleak messages ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION ipc: compat: use signed size_t types for msgsnd and msgrcv ipc: allow compat IPC version field parsing if !ARCH_WANT_OLD_COMPAT_IPC ipc: add COMPAT_SHMLBA support ...
2012-07-31ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSIONWill Deacon
Rather than #define the options manually in the architecture code, add Kconfig options for them and select them there instead. This also allows us to select the compat IPC version parsing automatically for platforms using the old compat IPC interface. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31atomic64_test: simplify the #ifdef for atomic64_dec_if_positive() testCatalin Marinas
Introduce CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE and use this instead of the multitude of #if defined() checks in atomic64_test.c Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30Merge branch 'for-linus-for-3.6-rc1' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping updates from Marek Szyprowski: "Those patches are continuation of my earlier work. They contains extensions to DMA-mapping framework to remove limitation of the current ARM implementation (like limited total size of DMA coherent/write combine buffers), improve performance of buffer sharing between devices (attributes to skip cpu cache operations or creation of additional kernel mapping for some specific use cases) as well as some unification of the common code for dma_mmap_attrs() and dma_mmap_coherent() functions. All extensions have been implemented and tested for ARM architecture." * 'for-linus-for-3.6-rc1' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: add support for DMA_ATTR_SKIP_CPU_SYNC attribute common: DMA-mapping: add DMA_ATTR_SKIP_CPU_SYNC attribute ARM: dma-mapping: add support for dma_get_sgtable() common: dma-mapping: introduce dma_get_sgtable() function ARM: dma-mapping: add support for DMA_ATTR_NO_KERNEL_MAPPING attribute common: DMA-mapping: add DMA_ATTR_NO_KERNEL_MAPPING attribute common: dma-mapping: add support for generic dma_mmap_* calls ARM: dma-mapping: fix error path for memory allocation failure ARM: dma-mapping: add more sanity checks in arm_dma_mmap() ARM: dma-mapping: remove custom consistent dma region mm: vmalloc: use const void * for caller argument scatterlist: add sg_alloc_table_from_pages function
2012-07-30common: dma-mapping: add support for generic dma_mmap_* callsMarek Szyprowski
Commit 9adc5374 ('common: dma-mapping: introduce mmap method') added a generic method for implementing mmap user call to dma_map_ops structure. This patch converts ARM and PowerPC architectures (the only providers of dma_mmap_coherent/dma_mmap_writecombine calls) to use this generic dma_map_ops based call and adds a generic cross architecture definition for dma_mmap_attrs, dma_mmap_coherent, dma_mmap_writecombine functions. The generic mmap virt_to_page-based fallback implementation is provided for architectures which don't provide their own implementation for mmap method. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-29new helper: done_path_create()Al Viro
releases what needs to be released after {kern,user}_path_create() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-29pull unlock+dput() out into do_spu_create()Al Viro
... and cleaning spufs_create() a bit, while we are at it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-29spufs: pull unlock-and-dput() up into spufs_create()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-29spufs_create_context(): simplify failure exitsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-29move spu_forget() into spufs_rmdir()Al Viro
now that __fput() is *not* done in any callchain containing mmput(), we can do that... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-27Merge branch 'kmap_atomic' of git://github.com/congwang/linuxLinus Torvalds
Pull final kmap_atomic cleanups from Cong Wang: "This should be the final round of cleanup, as the definitions of enum km_type finally get removed from the whole tree. The patches have been in linux-next for a long time." * 'kmap_atomic' of git://github.com/congwang/linux: pipe: remove KM_USER0 from comments vmalloc: remove KM_USER0 from comments feature-removal-schedule.txt: remove kmap_atomic(page, km_type) tile: remove km_type definitions um: remove km_type definitions asm-generic: remove km_type definitions avr32: remove km_type definitions frv: remove km_type definitions powerpc: remove km_type definitions arm: remove km_type definitions highmem: remove the deprecated form of kmap_atomic tile: remove usage of enum km_type frv: remove the second parameter of kmap_atomic_primary() jbd2: remove the second argument of kmap_atomic
2012-07-27Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "Here's a handful of powerpc patches, a couple of regression fixes for problems introduced in the main batch in this merge window, a couple of defconfig updates, and some trivials. The radeonfb one is something that was long standing in SLES which I forgot to pickup earlier." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ftrace: Trace function graph entry before updating index radeonfb: Add quirk for the graphics adapter in some JSxx powerpc: Lack of firmware flash support is not an error powerpc: Enable pseries hardware RNG and crypto modules powerpc: Update g5_defconfig powerpc/kvm/bookehv: Fix build regression powerpc: Set stack limit properly in crit_transfer_to_handler