summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2006-12-07[PATCH] slab: remove SLAB_KERNELChristoph Lameter
SLAB_KERNEL is an alias of GFP_KERNEL. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] shared page table for hugetlb pageChen, Kenneth W
Following up with the work on shared page table done by Dave McCracken. This set of patch target shared page table for hugetlb memory only. The shared page table is particular useful in the situation of large number of independent processes sharing large shared memory segments. In the normal page case, the amount of memory saved from process' page table is quite significant. For hugetlb, the saving on page table memory is not the primary objective (as hugetlb itself already cuts down page table overhead significantly), instead, the purpose of using shared page table on hugetlb is to allow faster TLB refill and smaller cache pollution upon TLB miss. With PT sharing, pte entries are shared among hundreds of processes, the cache consumption used by all the page table is smaller and in return, application gets much higher cache hit ratio. One other effect is that cache hit ratio with hardware page walker hitting on pte in cache will be higher and this helps to reduce tlb miss latency. These two effects contribute to higher application performance. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Dave McCracken <dmccr@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Adam Litke <agl@us.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-05WorkQueue: Fix up arch-specific work items where possibleDavid Howells
Fix up arch-specific work items where possible to use the new work_struct and delayed_work structs. Three places that enqueue bits of their stack and then return have been marked with #error as this is not permitted. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/ata/libata-scsi.c include/linux/libata.h Futher merge of Linus's head and compilation fixups. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05[POWERPC] Add missing EXPORTS for mpc52xx supportGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-05[POWERPC] Remove obsolete PPC_52xx and update CLASSIC32 commentGrant Likely
The support for the 52xx-based systems is now included under CONFIG_CLASSIC32, since the 52xx chips have a 603e-based core. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-05[POWERPC] ps3: add a default zImage targetGeoff Levand
Add a powerpc make target that can be loaded by the ps3 bootloader (kboot) and set this as the default image to build for that platform. Until the compressed zImage wrapper is made, this arranges for a stripped vmlinux image to be built. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Fix debug printks for 32-bit resources in the PCI codeSergei Shtylyov
Cure the damage done by the former PCI debug printks fix for the case of 64-bit resources (commit 685143ac1f7a579a3fac9c7f2ac8f82e95af6864) which broke it for the plain vanilla 32-bit resources... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Replace kmalloc+memset with kzallocYan Burman
Replace kmalloc+memset with kzalloc. Signed-off-by: Yan Burman <burman.yan@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Linkstation / kurobox supportGuennadi Liakhovetski
Support for the Kurobox(HG)/LinkStation-I NAS systems by Buffalo Technology, should be also applicable to the PPC TeraStation family. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Add the e300c3 core to the CPU table.Scott Wood
This core is used in Freescale's 831x chips. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] iSeries: don't build head_64.o unnecessarilyStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] iSeries: stop dt_mod.o being rebuilt unnecessarilyStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Fix cputable.h for combined buildStephen Rothwell
Remove CPU_FTR_16M_PAGE from the cupfeatures mask at runtime on iSeries. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Allow CONFIG_BOOTX_TEXT on iSeriesStephen Rothwell
and therefore combined builds. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Allow xmon to build on legacy iSeriesStephen Rothwell
xmon still does not run on iSeries, but this allows us to build a combined kernel that includes it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Change ppc64_defconfig to use AUTOFS_V4 not V3Linas Vepstas
Defconfig ppc64 kernels running under late-model distros may hang in the automounter rc.d script, which seems to be expecting autofs version 4. This patch uses the newer autofs. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Tell firmware we can handle POWER6 compatible modePaul Mackerras
This adds the "logical" PVR value used by POWER6 in "compatible" mode to the list of PVR values that the kernel tells firmware it is able to handle. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Clean images in arch/powerpc/bootGeert Uytterhoeven
Add a rule to clean up the various generated image files in arch/powerpc/boot. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Fix OF pci flags parsingOlof Johansson
For PCI devices with only io ports, of_bus_pci_get_flags() will fall through and still mark the resource as IORESOURCE_MEM. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] defconfig for lite5200 boardGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Add device trees for lite5200 and lite5200b eval boardsGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Add lite5200 board support to arch/powerpcGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Add common routines for 52xx support in arch/powerpcGrant Likely
Adds utility routines used by 52xx device drivers and board support code. Main functionality is to add device nodes to the of_platform_bus, retrieve the IPB bus frequency, and find+ioremap device registers. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Separate IRQ config / register set from main headerSylvain Munaut
There is no need to expose these settings outside the scope of the interrupt controller code itself. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Move Efika support files into platforms/52xxGrant Likely
The Efika board isn't different enough from other 52xx based boards to justify a separate platform. This patch merges it with the support code for all other 52xx based boards. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Put mpc52xx support file in platforms/52xxGrant Likely
platforms/embedded6xx is probably going away, and 52xx boards need some extra support the 52xx interrupt controller and DMA engine anyway. It makes sense to group all the 52xx bits into a single path. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Move MPC52xx PIC driver into arch/powerpc/platforms/52xxGrant Likely
No other chips use this device, it belongs in a 52xx-specific path. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] iSeries: allow CONFIG_CMDLINEStephen Rothwell
It doesn't hurt to have this enabled on legacy iSeries and will mean it is available for a combined build. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] iSeries: Eliminate "exceeds stub group size" warningsStephen Rothwell
Commit 3ccfc65c5004e5fe5cfbffe43b8acc686680b53e missed the same fixes for legacy iSeries specific code, so make some more symbols no longer global. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Add files build to .gitignoreRutger Nijlunsing
Mostly taken from corresponding Makefile's make-clean rule. Tested by (cross)compiling for $ARCH PPC and POWERPC and checking output of git-status. Signed-off-by: Rutger Nijlunsing <git-commit@tux.tmfweb.nl> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Add of_platform support for ROM devicesVitaly Wool
This adds support for flash device descriptions to the OF device tree. It's inspired by and partially borrowed from Sergei's patch "[RFC] Adding MTD to device tree.patch". Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] pSeries/kexec: Fix for interrupt distributionMohan Kumar M
This allows any secondary CPU thread also to become boot cpu for POWER5. The patch is required to solve kdump boot issue when the kdump kernel is booted with parameter "maxcpus=1". XICS init code tries to match the current boot cpu id with "reg" property in each CPU node in the device tree. But CPU node is created only for primary thread CPU ids and "reg" property only reflects primary CPU ids. So when a kernel is booted on a secondary cpu thread above condition will never meet and the default distribution server is left as zero. This leads to route the interrupts to CPU 0, but which is not online at this time. We use ibm,ppc-interrupt-server#s to check for both primary and secondary CPU ids. Accordingly default distribution server value is initialized from "ibm,ppc-interrupt-gserver#s" property. We loop through ibm,ppc-interrupt-gserver#s property to find the global distribution server from the last entry that matches with boot cpuid. Signed-off-by: Mohan Kumar M <mohan@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] fix missing #include in sys_ppc32.cArnd Bergmann
sys_mmap is declared in asm/syscalls.h Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] ps3: add a default zImage targetArnd Bergmann
It's currently not possible to build the default zImage target if PS3 is the only selected platform. This is a hack to fall back to building the pseries style zImage, so the build is successful. This will probably change in the future, if someone writes a PS3 specific boot wrapper. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] ps3: multiplatform build fixesArnd Bergmann
A few code paths need to check whether or not they are running on the PS3's LV1 hypervisor before making hcalls. This introduces a new firmware feature bit for this, FW_FEATURE_PS3_LV1. Now when both PS3 and IBM_CELL_BLADE are enabled, but not PSERIES, FW_FEATURE_PS3_LV1 and FW_FEATURE_LPAR get enabled at compile time, which is a bug. The same problem can also happen for (PPC_ISERIES && !PPC_PSERIES && PPC_SOMETHING_ELSE). In order to solve this, I introduce a new CONFIG_PPC_NATIVE option that is set when at least one platform is selected that can run without a hypervisor and then turns the firmware feature check into a run-time option. The new cell oprofile support that was recently merged does not work on hypervisor based platforms like the PS3, therefore make it depend on PPC_CELL_NATIVE instead of PPC_CELL. This may change if we get oprofile support for PS3. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] ps3: Missed renames of CONFIG_PS3 to CONFIG_PPC_PS3Geert Uytterhoeven
When renaming CONFIG_PS3 to CONFIG_PPC_PS3, a few occurrences have been missed. I also fixed up the alignment in arch/powerpc/platforms/Makefile. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] cell: fix building without spufsArnd Bergmann
It may be desireable to build a kernel for cell without spufs, e.g. as the initial kboot kernel. This requires that the SPU specific parts of the core dump and the xmon code depend on CONFIG_SPU_BASE instead of CONFIG_PPC_CELL. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] spufs: we should only execute init_spu_base on cellStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] spufs: always send sigtrap on breakpointArnd Bergmann
Currently, we only send a sigtrap if the current task is being ptraced. This is somewhat inconsistant, and it breaks utrace support in fedora. Removing the check should do the right thing in all cases. Cc: Ulrich Weigand <ulrich.weigand@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] spufs: return an error in spu_create is isolated create isnt supportedJeremy Kerr
This changes the spu_create system call to return an error (-ENODEV) if and isolated spu context is requested on hardware that doesn't support isolated mode. Tested on systemsim with and without isolation support Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] Fix compile issue for Efika platformNicolas DET
This patch fixes a compile issue for the Efika platform recently introduced by API changes. Signed-off-by: Nicolas DET <nd@bplan-gmbh.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Compile a zImage.chrp if PPC_EFIKA seletedNicolas DET
Signed-off-by: Nicolas DET <nd@bplan-gmbh.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] powerpc: Make 970MP detectable by oprofileMike Wolf
Change the oprofile_cpu_type in cputables.c to be ppc64/970MP. Oprofile needs to distinquish the MP from other 970 processors so it can add some new counters specific to the 970MP. Signed-off-by: Mike Wolf <mjw@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] update cell_defconfig for ps3 supportArnd Bergmann
In the common cell kernel, I want to have ps3 enabled to find potential bugs at compile-time. Also enable SPU disassembly in xmon. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] ps3: add ps3_defconfigGeoff Levand
Adds a ps3_defconfig for the PS3 game console. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] ps3: add spu supportGeoff Levand
Adds spu support for the PS3 platform. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] ps3: add OS params supportGeoff Levand
Adds support for early access to the parameter data from the PS3 'Other OS' flash memory area. The parameter data mainly holds user preferences like static ip address. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] ps3: add lpar addressingGeoff Levand
Adds some needed bits for a config option PS3_USE_LPAR_ADDR that disables the PS3 lpar address translation mechanism. This is a currently needed workaround for limitations in the design of the generic cell spu support. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>