summaryrefslogtreecommitdiff
path: root/arch/s390
AgeCommit message (Collapse)Author
2010-11-25[S390] nmi: fix clock comparator revalidationHeiko Carstens
On each machine check all registers are revalidated. The save area for the clock comparator however only contains the upper most seven bytes of the former contents, if valid. Therefore the machine check handler uses a store clock instruction to get the current time and writes that to the clock comparator register which in turn will generate an immediate timer interrupt. However within the lowcore the expected time of the next timer interrupt is stored. If the interrupt happens before that time the handler won't be called. In turn the clock comparator won't be reprogrammed and therefore the interrupt condition stays pending which causes an interrupt loop until the expected time is reached. On NOHZ machines this can result in unresponsive machines since the time of the next expected interrupted can be a couple of days in the future. To fix this just revalidate the clock comparator register with the expected value. In addition the special handling for udelay must be changed as well. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-10[S390] kprobes: Fix the return address of multiple kretprobesMartin Schwidefsky
Analog to git commit 737480a0d525dae13306296da08029dff545bc72 fix the return address of subsequent kretprobes when multiple kretprobes are set on the same function. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-11-10[S390] kprobes: disable interrupts throughoutMartin Schwidefsky
Execute the kprobe exception and fault handler with interrupts disabled. To disable the interrupts only while a single step is in progress is not good enough, a kprobe from interrupt context while another kprobe is handled can confuse the internal house keeping. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-11-10[S390] mm: add devmem_is_allowed() for STRICT_DEVMEM checkingHendrik Brueckner
Provide the devmem_is_allowed() routine to restrict access to kernel memory from userspace. Set the CONFIG_STRICT_DEVMEM config option to switch on checking. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-11-10[S390] fix get_user_pages_fastMartin Schwidefsky
The check for the _PAGE_RO bit in get_user_pages_fast for write==1 is the wrong way around. It must not be set for the fast path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-29Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix kprobes single stepping [S390] tape: fix dbf usage [S390] dasd: provide a Sense Path Group ID ioctl [S390] ftrace: select HAVE_C_RECORDMCOUNT [S390] vdso: get rid of redefinition warnings [S390] facility detection: remove unused variable [S390] hypfs: Fix error handling in hypfs_diag initialization [S390] topology: fix cpu masks for topology=off case [S390] topology: add SCHED_MC config option [S390] Kconfig: add machine type number to code generation options [S390] Add z196 machine type to setup_hwcaps
2010-10-29[S390] fix kprobes single steppingMartin Schwidefsky
Fix kprobes after git commit 1e54622e0403891b10f2105663e0f9dd595a1f17 broke it. The kprobe_handler is now called with interrupts in the state at the time of the breakpoint. The single step of the replaced instruction is done with interrupts off which makes it necessary to enable and disable the interupts in the kprobes code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-29[S390] dasd: provide a Sense Path Group ID ioctlStefan Weinhuber
The BIODASDSNID ioctl executes a 'Sense Path Group ID' command on a DASD ECKD device. The returned path group data allows user space programs to determine path state and path group ID of the channel paths to the device. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-29[S390] ftrace: select HAVE_C_RECORDMCOUNTHeiko Carstens
Select HAVE_C_RECORDMCOUNT for the fast C version of recordmcount. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-29[S390] vdso: get rid of redefinition warningsHeiko Carstens
The CLOCK_* defines in asm-offsets.c are only used for the vdso code however in the meantime they cause other trouble. Just rename them to get permanently rid of this: In file included from /home2/heicarst/linux-2.6/arch/s390/include/asm/asm-offsets.h:1:0, from arch/s390/mm/fault.c:33: include/generated/asm-offsets.h:53:0: warning: "CLOCK_REALTIME" redefined include/linux/time.h:286:0: note: this is the location of the previous definition include/generated/asm-offsets.h:54:0: warning: "CLOCK_MONOTONIC" redefined include/linux/time.h:287:0: note: this is the location of the previous definition Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-29[S390] facility detection: remove unused variableHeiko Carstens
arch/s390/kernel/early.c: In function 'setup_hpage': arch/s390/kernel/early.c:285:15: warning: unused variable 'facilities' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-29[S390] hypfs: Fix error handling in hypfs_diag initializationMichael Holzheu
Fix the following two error handling bugs in hypfs_diag_init(): * No need for calling diag204_free_buffer() * Initialize name table only in case of LPAR and prevent error message on non-LPAR systems. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-29[S390] topology: fix cpu masks for topology=off caseHeiko Carstens
Fix cpu masks for 'topology=off' case. Folding of the scheduling domains happen in such a way that everything belongs to the MC domain instead of the CPU doimain. This should fix a performance regression introduced with eafd2b6d "[S390] topology: use default MC domain initializer" and also makes sure we have the same behavious as if CONFIG_SCHED_MC was not selected at all. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-29[S390] topology: add SCHED_MC config optionHeiko Carstens
This allows us to easily check for performance differences seen with !CONFIG_SCHED_MC and topology=off. Actually there shouldn't be any (besides a small overhead because of additional code). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-29[S390] Kconfig: add machine type number to code generation optionsHeiko Carstens
Add machine type number to code generation options. Also clean up and shorten quite a lot of help texts with respect to machine type and architecture terminology. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-29[S390] Add z196 machine type to setup_hwcapsHeiko Carstens
Add machine type for zEnterprise 196 to elf platform detection. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-29convert get_sb_single() usersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-28Merge branch 'kconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (38 commits) kbuild: convert `arch/tile' to the kconfig mainmenu upgrade README: cite nconfig Revert "kconfig: Temporarily disable dependency warnings" kconfig: Use PATH_MAX instead of 128 for path buffer sizes. kconfig: Fix realloc usage() kconfig: Propagate const kconfig: Don't go out from read config loop when you read new symbol kconfig: fix menuconfig on debian lenny kbuild: migrate all arch to the kconfig mainmenu upgrade kconfig: expand file names kconfig: use the file's name of sourced file kconfig: constify file name kconfig: don't emit warning upon rootmenu's prompt redefinition kconfig: replace KERNELVERSION usage by the mainmenu's prompt kconfig: delay gconf window initialization kconfig: expand by default the rootmenu's prompt kconfig: add a symbol string expansion helper kconfig: regen parser kconfig: implement the `mainmenu' directive kconfig: allow PACKAGE to be defined on the compiler's command-line ... Fix up trivial conflict in arch/mn10300/Kconfig
2010-10-28taskstats: use real microsecond granularity for CPU timesMichael Holzheu
The taskstats interface uses microsecond granularity for the user and system time values. The conversion from cputime to the taskstats values uses the cputime_to_msecs primitive which effectively limits the granularity to milliseconds. Add the cputime_to_usecs primitive for architectures that have better, more precise CPU time values. Remove cputime_to_msecs primitive because there are no more users left. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Luck Tony <tony.luck@intel.com> Cc: Shailabh Nagar <nagar1234@in.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Shailabh Nagar <nagar@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28ptrace: change signature of arch_ptrace()Namhyung Kim
Fix up the arguments to arch_ptrace() to take account of the fact that @addr and @data are now unsigned long rather than long as of a preceding patch in this series. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: <linux-arch@vger.kernel.org> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26mm: remove pte_*map_nested()Peter Zijlstra
Since we no longer need to provide KM_type, the whole pte_*map_nested() API is now redundant, remove it. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25[S390] topology: export cpu topology via proc/sysinfoHeiko Carstens
Export the cpu configuration topology via sysinfo. Two new lines are introduced: CPU Topology HW: 0 0 0 4 6 4 CPU Topology SW: 0 0 0 0 4 24 The HW line describes the cpu topology nesting levels when the maximum nesting level is used to get the corresponding SYSIB. The SW line describes what Linux is actually using. In this case it supports only two levels (CONFIG_SCHED_BOOK off) and therefore the hardware folded the two lower levels in the SYSIB response block. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] topology: move topology sysinfo codeHeiko Carstens
Move the topology sysinfo SYSIB definitions to the proper place in asm/sysinfo.h where they should be. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] topology: clean up facility detectionHeiko Carstens
Move cpu topology facility detection to early setup code where it should be. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cleanup facility list handlingMartin Schwidefsky
Store the facility list once at system startup with stfl/stfle and reuse the result for all facility tests. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] enable ARCH_DMA_ADDR_T_64BIT with 64BITFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] kvm: Enable z196 instruction facilitiesChristian Borntraeger
Enable PFPO, floating point extension, distinct-operands, fast-BCR-serialization, high-word, interlocked-access, load/store- on-condition, and population-count facilities for guests. (bits 37, 44 and 45). Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] kvm: Fix badness at include/asm/mmu_context.h:83Christian Borntraeger
commit 050eef364ad700590a605a0749f825cab4834b1e [S390] fix tlb flushing vs. concurrent /proc accesses broke KVM on s390x. On every schedule a Badness at include/asm/mmu_context.h:83 appears. s390_enable_sie replaces the mm on the __running__ task, therefore, we have to increase the attach count of the new mm. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] topology: change defaultHeiko Carstens
Switch default value of the kernel parameter 'topology' from off to on. Various performance measurements have finally shown that there are no (known) regressions anywhere. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] smp: use correct cpu address in print_cpu_info()Heiko Carstens
Up to now print_cpu_info() uses the cpu address stored in it's local lowcore to print a message to the console. The cpu address in the lowcore is (in this case) however not the physical cpu address of the local cpu. It's the address of the cpu that issued the sigp restart which started the local cpu. Fix this by using the store cpu address instruction instead. It's not that anybody really cares since this is broken since more than ten years... Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] remove ieee_instruction_pointer from thread_structMartin Schwidefsky
The ieee_instruction_pointer can not be read from user space anymore since git commit 613e1def6b52c399a8b72a5e11bc2e57d2546fb8, the ptrace interface always returns zero. Remove it from the thread_struct. It is still present in the user_regs_struct for compatability reasons. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cleanup system call parameter setupMartin Schwidefsky
Do the setup of the stack overflow argument for the sixth system call parameter right before the branch to the system call function. That simplifies the system call parameter access code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] correct alignment of cpuid structureMartin Schwidefsky
The store-cpu-id instruction has a minimum alignment of 8. Reflect that in the definition of struct cpuid. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cleanup lowcore access from external interruptsMartin Schwidefsky
Read external interrupts parameters from the lowcore in the first level interrupt handler in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cleanup lowcore access from program checksMartin Schwidefsky
Read all required fields for program checks from the lowcore in the first level interrupt handler in entry[64].S. If the context that caused the fault was enabled for interrupts we can now re-enable the irqs in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] pgtable: move pte_mkhuge() from hugetlb.h to pgtable.hHeiko Carstens
All architectures besides s390 have pte_mkhuge() defined in pgtable.h. So move the function to pgtable.h on s390 as well. Fixes a compile error introduced with "hugetlb: hugepage migration core" in linux-next which only happens on s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] fix SIGBUS handlingMartin Schwidefsky
Raise SIGBUS with a siginfo structure. Deliver BUS_ADRERR as si_code and the address of the fault in the si_addr field. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cio: notify drivers of channel path eventsSebastian Ott
This patch adds a notification mechanism to inform ccw drivers about changes to channel paths, which occured while the device is online. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cmm: fix crash on case conversionHeiko Carstens
When the cmm module is compiled into the kernel it will crash when writing to the R/O data section. Reason is the lower to upper case conversion of the "sender" module parameter which ignored the fact that the pointer is preinitialized. Introduced with 41b42876 "cmm, smsgiucv_app: convert sender to uppercase" Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] switch_to: get rid of prev == next checkHeiko Carstens
schedule() makes sure that prev != next before calling switch_to(). Therefore remove the redundant check. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] switch_to: dont restore/save access & fpu regs for kernel threadsHeiko Carstens
If the previous task was a kernel thread there is no need to save the contents of the fpu and access registers since they aren't used in kernel mode. For the same reason it is not necessary to restore these registers if the next task is a kernel thread. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] Add config option for z196 code generation.Heiko Carstens
Add a kernel config option for the IBM zEnterprise 196. This will produce faster code on newer compilers using the -march=z196 option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] sysinfo: display capacity adjustment indicatorHeiko Carstens
Display machine capacity adjustment indicator and capacity change reason if available in /proc/sysinfo. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] add z196 instructions to kernel disassemblerMartin Schwidefsky
Add the new instructions introduced with z196 to the kernel disassembler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] add support for nonquiescing sskeMartin Schwidefsky
Improve performance of the sske operation by using the nonquiescing variant if the affected page has no mappings established. On machines with no support for the new sske variant the mask bit will be ignored. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] store indication fault optimizationMartin Schwidefsky
Use the store indication bit in the translation exception code on page faults to avoid the protection faults that immediatly follow the page fault if the access has been a write. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cpu hotplug/idle: move cpu_die call to enabled contextHeiko Carstens
There is no difference if cpu_die is called from enabled or disabled context. Except that the fast_gup code might be called via cpu_die -> idle_task_exit -> __mm_drop -> crst_table_free. Which in turn grabs and releases a spinlock using the _bh ops, which is not allowed in irq disabled context, since spin_unlock_bh will unconditionally enable interrupts again. To get rid of the warning emitted by the softirq code just move the code to enabled context. In this case this doesn't fix a bug, we just get rid of a warning. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] lockless get_user_pages_fast()Martin Schwidefsky
Implement get_user_pages_fast without locking in the fastpath on s390. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] set ARCH_HAS_SG_CHAIN for s390Christof Schmitt
Set ARCH_HAS_SG_CHAIN for scatter lists on s390. Without this flag the SCSI code limits the maximum number of segments, so set it to make proper use of the FCP channel hardware. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>