summaryrefslogtreecommitdiff
path: root/arch/sh/include
AgeCommit message (Collapse)Author
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull third pile of signal handling patches from Al Viro: "This time it's mostly helpers and conversions to them; there's a lot of stuff remaining in the tree, but that'll either go in -rc2 (isolated bug fixes, ideally via arch maintainers' trees) or will sit there until the next cycle." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: x86: get rid of calling do_notify_resume() when returning to kernel mode blackfin: check __get_user() return value whack-a-mole with TIF_FREEZE FRV: Optimise the system call exit path in entry.S [ver #2] FRV: Shrink TIF_WORK_MASK [ver #2] FRV: Prevent syscall exit tracing and notify_resume at end of kernel exceptions new helper: signal_delivered() powerpc: get rid of restore_sigmask() most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set set_restore_sigmask() is never called without SIGPENDING (and never should be) TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set don't call try_to_freeze() from do_signal() pull clearing RESTORE_SIGMASK into block_sigmask() sh64: failure to build sigframe != signal without handler openrisc: tracehook_signal_handler() is supposed to be called on success new helper: sigmask_to_save() new helper: restore_saved_sigmask() new helpers: {clear,test,test_and_clear}_restore_sigmask() HAVE_RESTORE_SIGMASK is defined on all architectures now
2012-06-01set_restore_sigmask() is never called without SIGPENDING (and never should be)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01new helpers: {clear,test,test_and_clear}_restore_sigmask()Al Viro
helpers parallel to set_restore_sigmask(), used in the next commits Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-31bury __kernel_nlink_t, make internal nlink_t consistentAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-24Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM changes from Avi Kivity: "Changes include additional instruction emulation, page-crossing MMIO, faster dirty logging, preventing the watchdog from killing a stopped guest, module autoload, a new MSI ABI, and some minor optimizations and fixes. Outside x86 we have a small s390 and a very large ppc update. Regarding the new (for kvm) rebaseless workflow, some of the patches that were merged before we switch trees had to be rebased, while others are true pulls. In either case the signoffs should be correct now." Fix up trivial conflicts in Documentation/feature-removal-schedule.txt arch/powerpc/kvm/book3s_segment.S and arch/x86/include/asm/kvm_para.h. I suspect the kvm_para.h resolution ends up doing the "do I have cpuid" check effectively twice (it was done differently in two different commits), but better safe than sorry ;) * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (125 commits) KVM: make asm-generic/kvm_para.h have an ifdef __KERNEL__ block KVM: s390: onereg for timer related registers KVM: s390: epoch difference and TOD programmable field KVM: s390: KVM_GET/SET_ONEREG for s390 KVM: s390: add capability indicating COW support KVM: Fix mmu_reload() clash with nested vmx event injection KVM: MMU: Don't use RCU for lockless shadow walking KVM: VMX: Optimize %ds, %es reload KVM: VMX: Fix %ds/%es clobber KVM: x86 emulator: convert bsf/bsr instructions to emulate_2op_SrcV_nobyte() KVM: VMX: unlike vmcs on fail path KVM: PPC: Emulator: clean up SPR reads and writes KVM: PPC: Emulator: clean up instruction parsing kvm/powerpc: Add new ioctl to retreive server MMU infos kvm/book3s: Make kernel emulated H_PUT_TCE available for "PR" KVM KVM: PPC: bookehv: Fix r8/r13 storing in level exception handler KVM: PPC: Book3S: Enable IRQs during exit handling KVM: PPC: Fix PR KVM on POWER7 bare metal KVM: PPC: Fix stbux emulation KVM: PPC: bookehv: Use lwz/stw instead of PPC_LL/PPC_STL for 32-bit fields ...
2012-05-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull first series of signal handling cleanups from Al Viro: "This is just the first part of the queue (about a half of it); assorted fixes all over the place in signal handling. This one ends with all sigsuspend() implementations switched to generic one (->saved_sigmask-based). With this, a bunch of assorted old buglets are fixed and most of the missing bits of NOTIFY_RESUME hookup are in place. Two more fixes sit in arm and um trees respectively, and there's a couple of broken ones that need obvious fixes - parisc and avr32 check TIF_NOTIFY_RESUME only on one of two codepaths; fixes for that will happen in the next series" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (55 commits) unicore32: if there's no handler we need to restore sigmask, syscall or no syscall xtensa: add handling of TIF_NOTIFY_RESUME microblaze: drop 'oldset' argument of do_notify_resume() microblaze: handle TIF_NOTIFY_RESUME score: add handling of NOTIFY_RESUME to do_notify_resume() m68k: add TIF_NOTIFY_RESUME and handle it. sparc: kill ancient comment in sparc_sigaction() h8300: missing checks of __get_user()/__put_user() return values frv: missing checks of __get_user()/__put_user() return values cris: missing checks of __get_user()/__put_user() return values powerpc: missing checks of __get_user()/__put_user() return values sh: missing checks of __get_user()/__put_user() return values sparc: missing checks of __get_user()/__put_user() return values avr32: struct old_sigaction is never used m32r: struct old_sigaction is never used xtensa: xtensa_sigaction doesn't exist alpha: tidy signal delivery up score: don't open-code force_sigsegv() cris: don't open-code force_sigsegv() blackfin: don't open-code force_sigsegv() ...
2012-05-23Merge branch 'x86-fpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull fpu state cleanups from Ingo Molnar: "This tree streamlines further aspects of FPU handling by eliminating the prepare_to_copy() complication and moving that logic to arch_dup_task_struct(). It also fixes the FPU dumps in threaded core dumps, removes and old (and now invalid) assumption plus micro-optimizes the exit path by avoiding an FPU save for dead tasks." Fixed up trivial add-add conflict in arch/sh/kernel/process.c that came in because we now do the FPU handling in arch_dup_task_struct() rather than the legacy (and now gone) prepare_to_copy(). * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, fpu: drop the fpu state during thread exit x86, xsave: remove thread_has_fpu() bug check in __sanitize_i387_state() coredump: ensure the fpu state is flushed for proper multi-threaded core dump fork: move the real prepare_to_copy() users to arch_dup_task_struct()
2012-05-23Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH updates from Paul Mundt: - New CPUs: SH7734 (SH-4A), SH7264 and SH7269 (SH-2A) - New boards: RSK2+SH7264, RSK2+SH7269 - Unbreaking kgdb for SMP - Consolidation of _32/_64 page fault handling. - watchdog and legacy DMA chainsawing, part 1 - Conversion to evt2irq() hwirq lookup, to support relocation of vectored IRQs for irqdomains. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (98 commits) sh: intc: Kill off special reservation interface. sh: Enable PIO API for hp6xx and se770x. sh: Kill off machvec IRQ hinting. sh: dma: More legacy cpu dma chainsawing. sh: Kill off MAX_DMA_ADDRESS leftovers. sh: Tidy up some of the cpu legacy dma header mess. sh: Move sh4a dma header from cpu-sh4 to cpu-sh4a. sh64: Fix up vmalloc fault range check. Revert "sh: Ensure fixmap and store queue space can co-exist." serial: sh-sci: Fix for port types without BRI interrupts. sh: legacy PCI evt2irq migration. sh: cpu dma evt2irq migration. sh: sh7763rdp evt2irq migration. sh: sdk7780 evt2irq migration. sh: migor evt2irq migration. sh: landisk evt2irq migration. sh: kfr2r09 evt2irq migration. sh: ecovec24 evt2irq migration. sh: ap325rxa evt2irq migration. sh: urquell evt2irq migration. ...
2012-05-23Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "The biggest change is the cleanup/simplification of the load-balancer: instead of the current practice of architectures twiddling scheduler internal data structures and providing the scheduler domains in colorfully inconsistent ways, we now have generic scheduler code in kernel/sched/core.c:sched_init_numa() that looks at the architecture's node_distance() parameters and (while not fully trusting it) deducts a NUMA topology from it. This inevitably changes balancing behavior - hopefully for the better. There are various smaller optimizations, cleanups and fixlets as well" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Taint kernel with TAINT_WARN after sleep-in-atomic bug sched: Remove stale power aware scheduling remnants and dysfunctional knobs sched/debug: Fix printing large integers on 32-bit platforms sched/fair: Improve the ->group_imb logic sched/nohz: Fix rq->cpu_load[] calculations sched/numa: Don't scale the imbalance sched/fair: Revert sched-domain iteration breakage sched/x86: Rewrite set_cpu_sibling_map() sched/numa: Fix the new NUMA topology bits sched/numa: Rewrite the CONFIG_NUMA sched domain support sched/fair: Propagate 'struct lb_env' usage into find_busiest_group sched/fair: Add some serialization to the sched_domain load-balance walk sched/fair: Let minimally loaded cpu balance the group sched: Change rq->nr_running to unsigned int x86/numa: Check for nonsensical topologies on real hw as well x86/numa: Hard partition cpu topology masks on node boundaries x86/numa: Allow specifying node_distance() for numa=fake x86/sched: Make mwait_usable() heed to "idle=" kernel parameters properly sched: Update documentation and comments sched_rt: Avoid unnecessary dequeue and enqueue of pushable tasks in set_cpus_allowed_rt()
2012-05-22sh: switch to saved_sigmask-based sigsuspend()/rt_sigsuspend()Al Viro
Complete the move of sh64 to it, trim the crap from prototypes, tidy up a bit. Infrastructure in do_signal() had already been there, in signal_64 as well as in signal_32 (where it was already used). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21sh: Kill off machvec IRQ hinting.Paul Mundt
Everything is using sparseirq these days, so we have no need to arbitrarily size nr_irqs ahead of time. The legacy IRQ pre-allocation likewise has no meaning for us, so that's killed off too. We now depend on nr_irqs expansion by the generic hardirq layer instead. It's also worth noting that the majority of boards had completely bogus values for their nr_irqs relative to their CPU and configurations, so this ends up correcting behaviour for quite a few platforms. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-19sh: dma: More legacy cpu dma chainsawing.Paul Mundt
Attempt to "tidy" up some of the multi IRQ handling and base + IRQ management. This should keep it limping along without too much hassle, and no new parts should ever be enabling or using this API anyways. It doesn't get any closer to lipstick on a pig as this. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-19sh: Kill off MAX_DMA_ADDRESS leftovers.Paul Mundt
We don't support the ISA DMA API, so this is only ever misused. The dma-sh case inadvertently broke the dreamcast case by testing the wrong variable for the total number of channels, so this fixes that up too. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-19sh: Tidy up some of the cpu legacy dma header mess.Paul Mundt
This has turned in to quite a mess, and with CPUs that care using dmaengine now it's about time to start cleaning up after the legacy DMA code. For starters, kill off the stubs for the CPUs that don't do anything, as well as all of the unused definitions. This leaves us with a set of IRQs and base addresses we can deal with later. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-19sh: Move sh4a dma header from cpu-sh4 to cpu-sh4a.Paul Mundt
cpu-sh4a headers take priority over cpu-sh4 ones by virtue of the build system, there's no need to try and mingle sh4a stuff in cpu-sh4. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18Revert "sh: Ensure fixmap and store queue space can co-exist."Paul Mundt
This reverts commit 20e7c297efeca0861adcca073a0d283da659834b. With store queues enabled the area above P4SEG has special properties from the MMU's point of view, which was causing fixmap failure. We'll have to do something else to satisfy the vmalloc range check. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18Merge branch 'sh/evt2irq-migration' into sh-latestPaul Mundt
Conflicts: arch/sh/kernel/cpu/sh3/setup-sh770x.c arch/sh/kernel/cpu/sh3/setup-sh7710.c arch/sh/kernel/cpu/sh3/setup-sh7720.c arch/sh/kernel/cpu/sh4/setup-sh7750.c arch/sh/kernel/cpu/sh4a/setup-sh7343.c arch/sh/kernel/cpu/sh4a/setup-sh7366.c arch/sh/kernel/cpu/sh4a/setup-sh7722.c arch/sh/kernel/cpu/sh4a/setup-sh7723.c arch/sh/kernel/cpu/sh4a/setup-sh7724.c arch/sh/kernel/cpu/sh4a/setup-sh7757.c arch/sh/kernel/cpu/sh4a/setup-sh7763.c arch/sh/kernel/cpu/sh4a/setup-sh7770.c arch/sh/kernel/cpu/sh4a/setup-sh7785.c arch/sh/kernel/cpu/sh4a/setup-sh7786.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: legacy PCI evt2irq migration.Paul Mundt
This converts over the legacy PCI IRQs to evt2irq() backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: cpu dma evt2irq migration.Paul Mundt
This migrates the cpu-family relative DMA IRQ definitions over to evt2irq() backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: sdk7780 evt2irq migration.Paul Mundt
Migrate sdk7780 to evt2irq backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: landisk evt2irq migration.Paul Mundt
Migrate landisk to evt2irq backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: hp6xx evt2irq migration.Paul Mundt
Migrate hp6xx to evt2irq backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: mach-se evt2irq migration.Paul Mundt
Migrate Solution Engine boards to evt2irq backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18sh: edosk7760 evt2irq migration.Paul Mundt
Migrate edosk7760 to evt2irq() backed hwirq lookups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-16fork: move the real prepare_to_copy() users to arch_dup_task_struct()Suresh Siddha
Historical prepare_to_copy() is mostly a no-op, duplicated for majority of the architectures and the rest following the x86 model of flushing the extended register state like fpu there. Remove it and use the arch_dup_task_struct() instead. Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1336692811-30576-1-git-send-email-suresh.b.siddha@intel.com Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Chris Zankel <chris@zankel.net> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-05-14sh64: Kill off unused fixed I/O mapping window.Paul Mundt
This was reworked some time ago to go through fixmaps instead, leaving the range itself unused. As such, kill off the remaining references and hand over the remaining space for fixmaps directly. This also makes it possible to simplify the vmalloc fault case as we no longer have to care about the special section. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14sh: Ensure fixmap and store queue space can co-exist.Paul Mundt
At the moment the top of the fixmap space is calculated from P4SEG, which places it at the end of the store queue space when that API is enabled. Make sure we use P3_ADDR_MAX here instead to find the proper address limit. With this done, it's also possible to switch to the generic vmalloc address range check now that VMALLOC_START/END encapsulate the translatable areas that we care about. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14sh: Support thread fault code encoding.Paul Mundt
This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14sh64: Provide EXPEVT helper.Paul Mundt
We need a lookup_exception_vector() helper for sh64 in order to use the common page fault code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14sh: Tidy up and generalize page fault error paths.Paul Mundt
This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10Merge branches 'sh/wdt' and 'sh/rsk-updates' into sh-latestPaul Mundt
Conflicts: arch/sh/Kconfig Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10sh: Add pinmux for sh7269Phil Edworthy
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10sh: Add sh7269 devicePhil Edworthy
This is an sh2a device (max 266MHz) with FPU, video display controller (VDC), 8 serial ports, 4 I2C channels, 3 CAN ports, SD and on-chip USB. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10sh: Provide stubbed I/O routines for NO_IOPORT case.Paul Mundt
Too many drivers fail at IOPORT vs IOMEM checking before blindly calling in to the API, so we may as well just provide basic stubs to get more build coverage. Other platforms already do this, too (tile, parisc, etc.) Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10Merge branch 'sh/rsk-updates' into sh-latestPaul Mundt
Conflicts: arch/sh/Kconfig Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10sh: Add pinmux for sh7264Phil Edworthy
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10sh: Add sh7264 devicePhil Edworthy
This is an sh2a device with FPU, video display controller (VDC), 8 serial ports, 3 I2C channels, 2 CAN ports, SD and on-chip USB. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-09sched/numa: Rewrite the CONFIG_NUMA sched domain supportPeter Zijlstra
The current code groups up to 16 nodes in a level and then puts an ALLNODES domain spanning the entire tree on top of that. This doesn't reflect the numa topology and esp for the smaller not-fully-connected machines out there today this might make a difference. Therefore, build a proper numa topology based on node_distance(). Since there's no fixed numa layers anymore, the static SD_NODE_INIT and SD_ALLNODES_INIT aren't usable anymore, the new code tries to construct something similar and scales some values either on the number of cpus in the domain and/or the node_distance() ratio. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: linux-alpha@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-sh@vger.kernel.org Cc: Matt Turner <mattst88@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: sparclinux@vger.kernel.org Cc: Tony Luck <tony.luck@intel.com> Cc: x86@kernel.org Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Greg Pearson <greg.pearson@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: bob.picco@oracle.com Cc: chris.mason@oracle.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-r74n3n8hhuc2ynbrnp3vt954@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-08sh-use-common-threadinfo-allocatorThomas Gleixner
The core now has a threadinfo allocator which uses a kmemcache when THREAD_SIZE < PAGE_SIZE. Deal with the xstate cleanup in the new arch_release_task_struct() function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Paul Mundt <lethal@linux-sh.org> Link: http://lkml.kernel.org/r/20120505150142.189348931@linutronix.de
2012-05-08Merge branch 'smp/threadalloc' into smp/hotplugThomas Gleixner
Reason: Pull in the separate branch which was created so arch/tile can base further work on it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-08fork: Remove the weak insanityThomas Gleixner
We error out when compiling with gcc4.1.[01] as it miscompiles __weak. The workaround with magic defines is not longer necessary. Make it __weak again. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20120505150141.306358267@linutronix.de
2012-05-08sh: Remove cpu_idle_wait()Thomas Gleixner
cpuidle uses generic kick_all_cpus_sync() now. Remove the unused code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mundt <lethal@linux-sh.org> Link: http://lkml.kernel.org/r/20120507175652.461648208@linutronix.de
2012-04-27sh: Fix up tracepoint build fallout from static key introduction.Nobuhiro Iwamatsu
With the introduction of static keys, anything using tracepoints blows up in the following manner: include/trace/events/oom.h:8:13: error: initializer element is not constant include/trace/events/oom.h:8:13: error: (near initialization for '__tracepoint_oom_score_adj_update') include/trace/events/oom.h:8:13: error: initializer element is not constant include/trace/events/oom.h:8:13: error: (near initialization for '__tracepoint_oom_score_adj_update.key') This is a result of the STATIC_KEY_INIT_xxx defs wrapping ATOMIC_INIT() which on sh includes an atomic_t typecast. Given that we don't really need the typecast for anything anymore, the simplest solution is simply to kill off the cast. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-26sh: Use generic idle thread allocationThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Link: http://lkml.kernel.org/r/20120420124557.855203626@linutronix.de
2012-04-19sh64: Kill off unused trap_no/error_code from thread_struct.Paul Mundt
While the trap number and error code are passed around for debugging purposes, this occurs wholly independently of the thread struct values. These values were never part of the sigcontext ABI and are thus never passed anywhere, so we can just kill them off across the board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-19Merge branches 'sh/st-integration' and 'sh/stackprotector' into sh-latestPaul Mundt
2012-04-19sh: initial stack protector support.Filippo Arcidiacono
This implements basic -fstack-protector support, based on the early ARM version in c743f38013aeff58ef6252601e397b5ba281c633. The SMP case is limited to the initial canary value, while the UP case handles per-task granularity (limited to 32-bit sh until a new enough sh64 compiler manifests itself). Signed-off-by: Filippo Arcidiacono <filippo.arcidiacono@st.com> Reviewed-by: Carmelo Amoroso <carmelo.amoroso@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-17Merge branch 'sh/kgdb' into sh-latestPaul Mundt
2012-04-17sh: Add initial support for SH7734 CPU subtypeNobuhiro Iwamatsu
This implements initial support for the SH7734. This adds support SCIF, TMU and RTC. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-11sh: kgdb: Unset CACHE_FLUSH_IS_SAFE for SMP.Paul Mundt
Our SMP cache flush ops use CPU cross calls to deal with things like I-cache accesses not being broadcast in hardware, so ensure that the CACHE_FLUSH_IS_SAFE reflects this. Signed-off-by: Paul Mundt <lethal@linux-sh.org>