summaryrefslogtreecommitdiff
path: root/arch/sh
AgeCommit message (Collapse)Author
2006-12-12sh: Fixup SH-2 BUG() trap handling.Yoshinori Sato
This adds in support for the BUG() trap on SH-2. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Use early_param() for earlyprintk parsing.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: Fix .empty_zero_page alignment for PAGE_SIZE > 4096.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: Fixup .data.page_aligned.Paul Mundt
This had a bogus .data.idt reference, fix it up.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: Hook up SH7722 scif ipr interrupts.Paul Mundt
Add the SCIF IRQs to the IPR table for SH7722. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: Fixup sh_bios() trap handling.Paul Mundt
This was inadvertently broken when the entry.S code split up, restore the missing branch and get subsequent traps working under debug again. This manifested itself as a lockup when attempting to reload the VBR base. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: SH-MobileR SH7722 CPU support.Paul Mundt
This adds CPU support for the SH7722. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: Convert remaining remap_area_pages() users to ioremap_page_range().Paul Mundt
A couple of these were missed. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: Fixup kernel_execve() for syscall cleanups.Paul Mundt
SH-2 and SH-2A need to use a different syscall base for the trapa vector than the other parts, so fixup the logic in the kernel_execve() case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: Fix get_wchan().Paul Mundt
Some time ago the schedule frame size changed and we failed to reflect this in get_wchan() at the time. This first popped up as a problem on SH7751R where schedule_frame ended up being unaligned and generating an unaligned trap. This fixes it up again.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: BUG() handling through trapa vector.Paul Mundt
Previously we haven't been doing anything with verbose BUG() reporting, and we've been relying on the oops path for handling BUG()'s, which is rather sub-optimal. This switches BUG handling to use a fixed trapa vector (#0x3e) where we construct a small bug frame post trapa instruction to get the context right. This also makes it trivial to wire up a DIE_BUG for the atomic die chain, which we couldn't really do before. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: Kill off unused SE7619 I/O ops.Yoshinori Sato
This can use the generic routines, so kill off the board-specific ones. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: Fix Solution Engine 7619 build.Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: Trivial build fixes for SH-2 support.Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: IPR IRQ updates for SH7619/SH7206.Yoshinori Sato
This updates the SH7619 and SH7206 code for the IPR IRQ changes. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: gcc4 symbol export fixups.Stuart Menefy
gcc 4 for sh changes the names of some compiler intrinsic functions and adds some additional ones. This patch adds the new ones, and fixes up various module symbol resolution issues. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: landisk board build fixes.Paul Mundt
Get the landisk board building again.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: register rtc resources for sh775x.Jamie Lenehan
Register the RTC resources for the sh775x subtype so that the new generic RTC support in drivers/rtc/rtc-sh.c will work. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: SH-2 defconfig updates.Yoshinori Sato
This adds a new defconfig for SE7619 and updates SE7206. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: Add uImage and S-rec generation support.Paul Mundt
Add a couple of new targets, both for uImage and S-rec generation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-11sh: push-switch fixups for work_struct API damage.Paul Mundt
INIT_WORK() dropped the data arg, so now we have to stash an extra pointer and backpedal instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-08[PATCH] Generic ioremap_page_range: sh conversionHaavard Skinnemoen
Convert SH to use generic ioremap_page_range() Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] LOG2: Implement a general integer log2 facility in the kernelDavid Howells
This facility provides three entry points: ilog2() Log base 2 of unsigned long ilog2_u32() Log base 2 of u32 ilog2_u64() Log base 2 of u64 These facilities can either be used inside functions on dynamic data: int do_something(long q) { ...; y = ilog2(x) ...; } Or can be used to statically initialise global variables with constant values: unsigned n = ilog2(27); When performing static initialisation, the compiler will report "error: initializer element is not constant" if asked to take a log of zero or of something not reducible to a constant. They treat negative numbers as unsigned. When not dealing with a constant, they fall back to using fls() which permits them to use arch-specific log calculation instructions - such as BSR on x86/x86_64 or SCAN on FRV - if available. [akpm@osdl.org: MMC fix] Signed-off-by: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Howells <dhowells@redhat.com> Cc: Wojtek Kaniewski <wojtekka@toxygen.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] struct path: convert shJosef Sipek
Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] initrd: remove unused false condition for initrd_startHenry Nestler
After LOADER_TYPE && INITRD_START are true, the short if-condition for INITRD_START can never be false. Remove unused code from the else condition. Signed-off-by: Henry Nestler <henry.ne@arcor.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Export pm_suspend for the shared APM emulationRalf Baechle
The new shared APM emulation just like its ARM and MIPS predecessors uses pm_suspend() which was only exported on SH. Move export to close to it's definition where it really should be anyway. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Add include/linux/freezer.h and move definitions from sched.hNigel Cunningham
Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: Nigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove kmem_cache_tChristoph Lameter
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove SLAB_KERNELChristoph Lameter
SLAB_KERNEL is an alias of GFP_KERNEL. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] shared page table for hugetlb pageChen, Kenneth W
Following up with the work on shared page table done by Dave McCracken. This set of patch target shared page table for hugetlb memory only. The shared page table is particular useful in the situation of large number of independent processes sharing large shared memory segments. In the normal page case, the amount of memory saved from process' page table is quite significant. For hugetlb, the saving on page table memory is not the primary objective (as hugetlb itself already cuts down page table overhead significantly), instead, the purpose of using shared page table on hugetlb is to allow faster TLB refill and smaller cache pollution upon TLB miss. With PT sharing, pte entries are shared among hundreds of processes, the cache consumption used by all the page table is smaller and in return, application gets much higher cache hit ratio. One other effect is that cache hit ratio with hardware page walker hitting on pte in cache will be higher and this helps to reduce tlb miss latency. These two effects contribute to higher application performance. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Dave McCracken <dmccr@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Adam Litke <agl@us.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06sh: sh775x/titan fixes for irq header changes.Jamie Lenehan
The following moves the creation of IPR interupts into setup-7750.c and updates a few other things to make it all work after the "Drop CPU subtype IRQ headers" commit. It boots and runs fine on my titan board. - adds an ipr_idx to the ipr_data and uses a function in the subtype code to calculate the address of the IPR registers - adds a function to enable individual interrupt mode for externals in the subtype code and calls that from the titan board code instead of doing it directly. - I changed the shift in the ipr_data to be the actual # of bits to shift, instead of the numnber / 4 - made it easier to match with the manual. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: update r7780rp defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: compile fixes for header cleanup.Paul Mundt
Since some header inclusion paths were cleaned up, compilation broke. Add in the headers we need directly to build again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: set KBUILD_IMAGE to something sensible.Paul Mundt
This was missing for sh too, wire it up.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: show held locks in stack trace with lockdep.Paul Mundt
Follows the same change as other architectures.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: platform_pata support for R7780RPPaul Mundt
This adds a platform device for the directly connected CF interface on R7780RP boards, for use with the pata_platform libata driver. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: stacktrace/lockdep/irqflags tracing support.Paul Mundt
Wire up all of the essentials for lockdep.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: dyntick infrastructure.Paul Mundt
This adds basic NO_IDLE_HZ support to the SH timer API so timers are able to wire it up. Taken from the ARM version, as it fit in to our API with very few changes needed. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Clock framework tidying.Paul Mundt
This syncs up the SH clock framework with the linux/clk.h API, for which there were only some minor changes required, namely the clk_get() dev_id and subsequent callsites. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Turn off IRQs around get_timer_offset() calls.Paul Mundt
Since all of the sys_timer sources currently do this on their own within the ->get_offset() path, it's more sensible to just have the caller take care of it when grabbing xtime_lock. Incidentally, this is more in line with what others (ie, ARM) are doing already. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Get the PGD right in oops case with 64-bit PTEs.Paul Mundt
Previously this was using a static pgd shift in the reporting code, simply flip this to PGDIR_SHIFT which does the right thing depending on varying PTE magnitudes on the SH-X2 MMU. While we're at it, and since it's been recently added, use get_TTB() for fetching the TTB, rather than the open coded instructions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Fix store queue bitmap end.Paul Mundt
The end of the store queue bitmap is miscalculated when searching for a free range in sq_remap(), missing the PAGE_SHIFT shift that's done in sq_api_init(). This runs in to workloads where we can scan beyond the end of the bitmap. Spotted by Paul Jackson: http://marc.theaimsgroup.com/?l=linux-kernel&m=116493191224097&w Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: More flexible + SH7780 earlyprintk SCIF support.Paul Mundt
This makes the early printk support somewhat more flexible, moving the port definition to a config option, and making the port initialization configurable for sh-ipl+g users. At the same time, this allows us to trivially wire up the SH7780 SCIF0, so that's thrown in too more or less for free. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Fixup various PAGE_SIZE == 4096 assumptions.Paul Mundt
There were a number of places that made evil PAGE_SIZE == 4k assumptions that ended up breaking when trying to play with 8k and 64k page sizes, this fixes those up. The most significant change is the way we load THREAD_SIZE, previously this was done via: mov #(THREAD_SIZE >> 8), reg shll8 reg to avoid a memory access and allow the immediate load. With a 64k PAGE_SIZE, we're out of range for the immediate load size without resorting to special instructions available in later ISAs (movi20s and so on). The "workaround" for this is to bump up the shift to 10 and insert a shll2, which gives a bit more flexibility while still being much cheaper than a memory access. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Fixup 4K irq stacks.Paul Mundt
There was a clobber issue with the register we were saving the stack in, so we switch to a register that we handle in the clobber list properly already. This also follows the x86 changes for allowing the softirq checks from hardirq context. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: dma-api channel capability extensions.Mark Glaisher
This extends the SH DMA API for allowing handling of DMA channels based off of their respective capabilities. A couple of functions are added to the existing API, the core bits are register_chan_caps() for registering channel capabilities, and request_dma_bycap() for fetching a channel dynamically based off of a capability set. Signed-off-by: Mark Glaisher <mark.glaisher@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Drop name overload in dma-sh.Paul Mundt
Pass along the dev_id from request_dma() all the way down, rather than inserting an artificial name relating to the TEI line that we were doing before. This makes the line a bit less obvious, but dev_id is the proper behaviour for this regardless. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Make dma-isa depend on ISA_DMA_API.Paul Mundt
Previously we linked in the ISA DMA wrapper unconditionally. As there are very few users of this, it's better to make it conditional. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: dma-sysfs fixes.Paul Mundt
Handle the case where no registered DMACs exist somewhat more gracefully. While we're at it, check for sysdev_create_file() failing. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Fix syscall tracing ordering.Stuart Menefy
The implementation of system call tracing in the kernel has a couple of ordering problems: - the validity of the system call number is checked before calling out to system call tracing code, and should be done after - the system call number used when tracing is the one the system call was invoked with, while the system call tracing code can legitimatly change the call number (for example strace permutes fork into clone) This patch fixes both of these problems, and also reoders the code slightly to make the direct path through the code the common case. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>