summaryrefslogtreecommitdiff
path: root/arch/tile
AgeCommit message (Collapse)Author
2013-09-30arch: tile: re-use kbasename() helperAndy Shevchenko
kbasename() returns the filename part of a pathname. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2013-09-30tile: use a more conservative __my_cpu_offset in CONFIG_PREEMPTChris Metcalf
It turns out the kernel relies on barrier() to force a reload of the percpu offset value. Since we can't easily modify the definition of barrier() to include "tp" as an output register, we instead provide a definition of __my_cpu_offset as extended assembly that includes a fake stack read to hazard against barrier(), forcing gcc to know that it must reread "tp" and recompute anything based on "tp" after a barrier. This fixes observed hangs in the slub allocator when we are looping on a percpu cmpxchg_double. A similar fix for ARMv7 was made in June in change 509eb76ebf97. Cc: stable@vger.kernel.org Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-27tile: ensure interrupts disabled for preempt_schedule_irq()Chris Metcalf
When coming from a page fault (for example), interrupts might be enabled as we enter the code to return from interrupt. Cc: stable@vger.kernel.org Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-27tile: change lock initalization in hardwallHenrik Austad
hardwall used __SPIN_LOCK_INITIALIZER directly instead of the preferred __SPIN_LOCK_UNLOCKED. This also has the benefit that it will compile when applying the preempt-rt patch series. Signed-off-by: Henrik Austad <haustad@cisco.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-27tile: include: asm: use 'long long' instead of 'u64' for atomic64_t and its ↵Chen Gang
related functions atomic* value is signed value, and atomic* functions need also process signed value (parameter value, and return value), so use 'long long' instead of 'u64'. After replacement, it will also fix a bug for atomic64_add_negative(): "u64 is never less than 0". The modifications are: in vim, use "1,% s/\<u64\>/long long/g" command. remove redundant '__aligned(8)'. be sure of 80 (and macro '\') columns limitation after replacement. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [re-instated const cast]
2013-09-16tile: remove stray blank spaceChris Metcalf
The compat sys_llseek() definition addition added a bogus space on an otherwise-blank line. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-16tile: <arch/> header updates from upstreamChris Metcalf
The hardware architecture descriptor headers have been updated, in particular to reflect some larger MMIO fields on the mPIPE shims for controlling the network hardware, from the recent Gx72 release. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-16tile: improve gxio iorpc autogenerated code styleChris Metcalf
Fix some whitespace style issues in some auto-generated files. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-16tile: double default VMALLOC spaceChris Metcalf
With per-cpu data as well as loaded kernel modules coming from the vmalloc arena, we get close to the line all the time and occasionally need more than we had, so just double it up by default. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-13tile: remove stale arch/tile/kernel/futex_64.SChris Metcalf
This should have been removed with commit 47d632f9f8f3, but it was overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-13tile: remove HUGE_VMAP dead codeChris Metcalf
A config option to allow a variant vmap() using huge pages that was never upstreamed had some bits of code related to it scattered around the tile architecture; the config option was removed downstream and this commit cleans up the scattered evidence of it from the upstream as well. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-13tile: use pmd_pfn() instead of casting via pte_tChris Metcalf
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-13tile: fix typos in comment in arch/tile/kernel/unaligned.cChris Metcalf
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-12arch: mm: pass userspace fault flag to generic fault handlerJohannes Weiner
Unlike global OOM handling, memory cgroup code will invoke the OOM killer in any OOM situation because it has no way of telling faults occuring in kernel context - which could be handled more gracefully - from user-triggered faults. Pass a flag that identifies faults originating in user space from the architecture-specific fault handlers to generic code so that memcg OOM handling can be improved. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: azurIt <azurit@pobox.sk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12arch: mm: remove obsolete init OOM protectionJohannes Weiner
The memcg code can trap tasks in the context of the failing allocation until an OOM situation is resolved. They can hold all kinds of locks (fs, mm) at this point, which makes it prone to deadlocking. This series converts memcg OOM handling into a two step process that is started in the charge context, but any waiting is done after the fault stack is fully unwound. Patches 1-4 prepare architecture handlers to support the new memcg requirements, but in doing so they also remove old cruft and unify out-of-memory behavior across architectures. Patch 5 disables the memcg OOM handling for syscalls, readahead, kernel faults, because they can gracefully unwind the stack with -ENOMEM. OOM handling is restricted to user triggered faults that have no other option. Patch 6 reworks memcg's hierarchical OOM locking to make it a little more obvious wth is going on in there: reduce locked regions, rename locking functions, reorder and document. Patch 7 implements the two-part OOM handling such that tasks are never trapped with the full charge stack in an OOM situation. This patch: Back before smart OOM killing, when faulting tasks were killed directly on allocation failures, the arch-specific fault handlers needed special protection for the init process. Now that all fault handlers call into the generic OOM killer (see commit 609838cfed97: "mm: invoke oom-killer from remaining unconverted page fault handlers"), which already provides init protection, the arch-specific leftovers can be removed. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: azurIt <azurit@pobox.sk> Acked-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11mm: migrate: check movability of hugepage in unmap_and_move_huge_page()Naoya Horiguchi
Currently hugepage migration works well only for pmd-based hugepages (mainly due to lack of testing,) so we had better not enable migration of other levels of hugepages until we are ready for it. Some users of hugepage migration (mbind, move_pages, and migrate_pages) do page table walk and check pud/pmd_huge() there, so they are safe. But the other users (softoffline and memory hotremove) don't do this, so without this patch they can try to migrate unexpected types of hugepages. To prevent this, we introduce hugepage_migration_support() as an architecture dependent check of whether hugepage are implemented on a pmd basis or not. And on some architecture multiple sizes of hugepages are available, so hugepage_migration_support() also checks hugepage size. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-06Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...
2013-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
Pull Tile arch updates from Chris Metcalf: "These changes bring in a bunch of new functionality that has been maintained internally at Tilera over the last year, plus other stray bits of work that I've taken into the tile tree from other folks. The changes include some PCI root complex work, interrupt-driven console support, support for performing fast-path unaligned data fixups by kernel-based JIT code generation, CONFIG_PREEMPT support, vDSO support for gettimeofday(), a serial driver for the tilegx on-chip UART, KGDB support, more optimized string routines, support for ftrace and kprobes, improved ASLR, and many bug fixes. We also remove support for the old TILE64 chip, which is no longer buildable" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (85 commits) tile: refresh tile defconfig files tile: rework <asm/cmpxchg.h> tile PCI RC: make default consistent DMA mask 32-bit tile: add null check for kzalloc in tile/kernel/setup.c tile: make __write_once a synonym for __read_mostly tile: remove support for TILE64 tile: use asm-generic/bitops/builtin-*.h tile: eliminate no-op "noatomichash" boot argument tile: use standard tile_bundle_bits type in traps.c tile: simplify code referencing hypervisor API addresses tile: change <asm/system.h> to <asm/switch_to.h> in comments tile: mark pcibios_init() as __init tile: check for correct compiler earlier in asm-offsets.c tile: use standard 'generic-y' model for <asm/hw_irq.h> tile: use asm-generic version of <asm/local64.h> tile PCI RC: add comment about "PCI hole" problem tile: remove DEBUG_EXTRA_FLAGS kernel config option tile: add virt_to_kpte() API and clean up and document behavior tile: support FRAME_POINTER tile: support reporting Tilera hypervisor statistics ...
2013-09-06tile: refresh tile defconfig filesChris Metcalf
These are based on the current shipping versions of the config files from Tilera, as synced up to the tip, so are a better starting point for folks who want a default configuration. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06tile: rework <asm/cmpxchg.h>Chris Metcalf
The macrology in cmpxchg.h was designed to allow arbitrary pointer and integer values to be passed through the routines. To support cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we used the idiom "(typeof(val))(typeof(val-val))". This way, in the "size 8" branch of the switch, when the underlying cmpxchg routine returns a 64-bit quantity, we cast it first to a typeof(val-val) quantity (i.e. size_t if "val" is a pointer) with no warnings about casting between pointers and integers of different sizes, then cast onwards to typeof(val), again with no warnings. If val is not a pointer type, the additional cast is a no-op. We can't replace the typeof(val-val) cast with (for example) unsigned long, since then if "val" is really a 64-bit type, we cast away the high bits. HOWEVER, this fails with current gcc (through 4.7 at least) if "val" is a pointer to an incomplete type. Unfortunately gcc isn't smart enough to realize that "val - val" will always be a size_t type even if it's an incomplete type pointer. Accordingly, I've reworked the way we handle the casting. We have given up the ability to use cmpxchg() on 64-bit values on tilepro, which is OK in the kernel since we should use cmpxchg64() explicitly on such values anyway. As a result, I can just use simple "unsigned long" casts internally. As I reworked it, I realized it would be cleaner to move the architecture-specific conditionals for cmpxchg and xchg out of the atomic.h headers and into cmpxchg, and then use the cmpxchg() and xchg() primitives directly in atomic.h and elsewhere. This allowed the cmpxchg.h header to stand on its own without relying on the implicit include of it that is performed by <asm/atomic.h>. It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines from atomic_{32,64}.h into atomic.h. I improved the tests that guard the allowed size of the arguments to the routines to use a __compiletime_error() test. (By avoiding the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as well and use the macros there, which is otherwise impossible due to include order dependency issues.) The tilepro _atomic_xxx internal methods were previously set up to take atomic_t and atomic64_t arguments, which isn't as convenient with the new model, so I modified them to take int or u64 arguments, which is consistent with how they used the arguments internally anyway, so provided some nice simplification there too. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: "Noteworthy changes this time around: 1) Multicast rejoin support for team driver, from Jiri Pirko. 2) Centralize and simplify TCP RTT measurement handling in order to reduce the impact of bad RTO seeding from SYN/ACKs. Also, when both timestamps and local RTT measurements are available prefer the later because there are broken middleware devices which scramble the timestamp. From Yuchung Cheng. 3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel memory consumed to queue up unsend user data. From Eric Dumazet. 4) Add a "physical port ID" abstraction for network devices, from Jiri Pirko. 5) Add a "suppress" operation to influence fib_rules lookups, from Stefan Tomanek. 6) Add a networking development FAQ, from Paul Gortmaker. 7) Extend the information provided by tcp_probe and add ipv6 support, from Daniel Borkmann. 8) Use RCU locking more extensively in openvswitch data paths, from Pravin B Shelar. 9) Add SCTP support to openvswitch, from Joe Stringer. 10) Add EF10 chip support to SFC driver, from Ben Hutchings. 11) Add new SYNPROXY netfilter target, from Patrick McHardy. 12) Compute a rate approximation for sending in TCP sockets, and use this to more intelligently coalesce TSO frames. Furthermore, add a new packet scheduler which takes advantage of this estimate when available. From Eric Dumazet. 13) Allow AF_PACKET fanouts with random selection, from Daniel Borkmann. 14) Add ipv6 support to vxlan driver, from Cong Wang" Resolved conflicts as per discussion. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits) openvswitch: Fix alignment of struct sw_flow_key. netfilter: Fix build errors with xt_socket.c tcp: Add missing braces to do_tcp_setsockopt caif: Add missing braces to multiline if in cfctrl_linkup_request bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize vxlan: Fix kernel panic on device delete. net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls net: mvneta: properly disable HW PHY polling and ensure adjust_link() works icplus: Use netif_running to determine device state ethernet/arc/arc_emac: Fix huge delays in large file copies tuntap: orphan frags before trying to set tx timestamp tuntap: purge socket error queue on detach qlcnic: use standard NAPI weights ipv6:introduce function to find route for redirect bnx2x: VF RSS support - VF side bnx2x: VF RSS support - PF side vxlan: Notify drivers for listening UDP port changes net: usbnet: update addr_assign_type if appropriate driver/net: enic: update enic maintainers and driver driver/net: enic: Exposing symbols for Cisco's low latency driver ...
2013-09-03Merge tag 'pci-v3.12-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: PCI device hotplug: - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman) - Assign resources on per-host bridge basis (Yinghai Lu) MPS (Max Payload Size): - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang) - Add warnings about unsafe MPS settings (Yijing Wang) - Simplify interface and messages (Bjorn Helgaas) SR-IOV: - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann) - Update NumVFs register when disabling SR-IOV (Yijing Wang) Virtualization: - Add bus and slot reset support (Alex Williamson) - Fix ACS (Access Control Services) issues (Alex Williamson) Miscellaneous: - Simplify PCIe Capability accessors (Bjorn Helgaas) - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott) - Disable decoding during BAR sizing only when necessary (Zoltan Kiss) - Delay enabling bridges until they're needed (Yinghai Lu) - Split Designware support into Synopsys and Exynos parts (Jingoo Han) - Convert class code to use dev_groups (Greg Kroah-Hartman) - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon) - Fix bridge I/O window alignment (Bjorn Helgaas) - Add pci_wait_for_pending_transaction() (Casey Leedom) - Use devm_ioremap_resource() in Marvell driver (Tushar Behera) * tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available PCI: exynos: Add I/O access wrappers PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc() PCI: Remove pcie_cap_has_devctl() PCI: Support PCIe Capability Slot registers only for ports with slots PCI: Remove PCIe Capability version checks PCI: Allow PCIe Capability link-related register access for switches PCI: Add offsets of PCIe capability registers PCI: Tidy bitmasks and spacing of PCIe capability definitions PCI: Remove obsolete comment reference to pci_pcie_cap2() PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment PCI: Rename PCIe capability definitions to follow convention PCI: Warn if unsafe MPS settings detected PCI: Fix MPS peer-to-peer DMA comment syntax PCI: Disable decoding for BAR sizing only when it was actually enabled PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality PCI: Don't restrict MPS for slots below Root Ports PCI: Simplify MPS test for Downstream Port PCI: Remove unnecessary check for pcie_get_mps() failure ...
2013-09-03tile PCI RC: make default consistent DMA mask 32-bitChris Metcalf
This change sets the PCI devices' initial DMA capabilities conservatively and promotes them at the request of the driver, as opposed to assuming advanced DMA capabilities. The old design runs the risk of breaking drivers that assume default capabilities. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: add null check for kzalloc in tile/kernel/setup.cWang Sheng-Hui
Should check the return value of kzalloc first to avoid the null pointer. Then can dereference the non-null pointer to access the fields of struct resource. Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: make __write_once a synonym for __read_mostlyChris Metcalf
This was really only useful for TILE64 when we mapped the kernel data with small pages. Now we use a huge page and we really don't want to map different parts of the kernel data in different ways. We retain the __write_once name in case we want to bring it back to life at some point in the future. Note that this change uncovered a latent bug where the "smp_topology" variable happened to always be aligned mod 8 so we could store two "int" values at once, but when we eliminated __write_once it ended up only aligned mod 4. Fix with an explicit annotation. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: remove support for TILE64Chris Metcalf
This chip is no longer being actively developed for (it was superceded by the TILEPro64 in 2008), and in any case the existing compiler and toolchain in the community do not support it. It's unlikely that the kernel works with TILE64 at this point as the configuration has not been tested in years. The support is also awkward as it requires maintaining a significant number of ifdefs. So, just remove it altogether. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: use asm-generic/bitops/builtin-*.hAkinobu Mita
The definisions of __ffs(), __fls(), and ffs() for tile are almost same as asm-generic/bitops-*.h. The only difference is that it is defined as __always_inline or inline. So this switches to use those headers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [moved #includes to end]
2013-09-03tile: eliminate no-op "noatomichash" boot argumentChris Metcalf
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: use standard tile_bundle_bits type in traps.cChris Metcalf
We were rolling our own bundle_bits, which is unnecessary. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: simplify code referencing hypervisor API addressesChris Metcalf
There's no need to make up new ways of computing the addresses of the Tilera hypervisor APIs; just use the standard method of relying on the symbols to provide the addresses. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: change <asm/system.h> to <asm/switch_to.h> in commentsChris Metcalf
Also fix mentions of it in #error statements. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: mark pcibios_init() as __initChris Metcalf
It was bombed away because it was previously marked as __devinit, but it should be an __init function. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: check for correct compiler earlier in asm-offsets.cChris Metcalf
If we wait until after including a bunch of other files, we will have generated so much warning spew that it's hard to notice the error about using the wrong compiler. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: use standard 'generic-y' model for <asm/hw_irq.h>Chris Metcalf
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: use asm-generic version of <asm/local64.h>Chris Metcalf
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile PCI RC: add comment about "PCI hole" problemChris Metcalf
Explain the rationale of not overlapping the 64-bit DMA window with the PA range. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: remove DEBUG_EXTRA_FLAGS kernel config optionChris Metcalf
It isn't used any more by us now that the generic kernel build offers DEBUG_INFO_REDUCED, so just get rid of it. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: add virt_to_kpte() API and clean up and document behaviorChris Metcalf
We use virt_to_pte(NULL, va) a lot, which isn't very obvious. I added virt_to_kpte(va) as a more obvious wrapper function, that also validates the va as being a kernel adddress. And, I fixed the semantics of virt_to_pte() so that we handle the pud and pmd the same way, and we now document the fact that we handle the final pte level differently. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: support FRAME_POINTERChris Metcalf
Allow enabling frame pointer support; this makes it easier to hook into the various kernel features that claim they require it without having to add Kconfig conditionals everywhere (a la mips, ppc, s390, and microblaze). When enabled, it basically eliminates leaf functions as such, and stops optimizing tail and sibling calls. It adds around 3% to the size of the kernel when enabled. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: support reporting Tilera hypervisor statisticsChris Metcalf
Newer hypervisors have an API for reporting per-cpu statistics information. This change allows seeing that information via /sys/devices/system/cpu/cpuN/hv_stats file for each core. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tilegx: support KGDBChris Metcalf
Enter kernel debugger at boot with: --hvd UART_1=1 --hvx kgdbwait --hvx kgdboc=ttyS1,115200 or at runtime with: echo ttyS1,115200 > /sys/module/kgdboc/parameters/kgdboc echo g > /proc/sysrq-trigger Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tilegx: provide kernel support for the tilegx UART shimChris Metcalf
The TILE-Gx chip includes an on-chip UART. This change adds support for using the UART from within the kernel. The UART shim has more functionality than is exposed here, but to keep the kernel code and binary simpler, this is a subset of the full API designed to enable a standard Linux tty serial driver only. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: parameterize VA and PA space more cleanlyChris Metcalf
The existing code relied on the hardware definition (<arch/chip.h>) to specify how much VA and PA space was available. It's convenient to allow customizing this for some configurations, so provide symbols MAX_PA_WIDTH and MAX_VA_WIDTH in <asm/page.h> that can be modified if desired. Additionally, move away from the MEM_XX_INTRPT nomenclature to define the start of various regions within the VA space. In fact the cleaner symbol is, for example, MEM_SV_START, to indicate the start of the area used for supervisor code; the actual address of the interrupt vectors is not as important, and can be changed if desired. As part of this change, convert from "intrpt1" nomenclature (which built in the old privilege-level 1 model) to a simple "intrpt". Also strip out some tilepro-specific code supporting modifying the PL the kernel could run at, since we don't actually support using different PLs in tilepro, only tilegx. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: don't assume user privilege is zeroChris Metcalf
Technically, user privilege is anything less than kernel privilege. We modify the existing user_mode() macro to have this semantic (and use it in a couple of places it wasn't being used before), and add an IS_KERNEL_EX1() macro to the assembly code as well. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03tile: clean up relocate_kernel_64 debug codeChris Metcalf
We remove some debug code in relocate_kernel_64.S that made raw calls to the hv_console_putc Tilera hypervisor API, since everything should funnel through the early_hv_write() API. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30tile: handle super huge pages in virt_to_pteChris Metcalf
This tile-specific API had a minor bug, in that if a super huge (>4GB) page mapped a particular address range, we wouldn't handle it correctly. As part of fixing that bug, I also cleaned up some of the pud and pmd accessors to make them more consistent. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30tilegx: change how we find the kernel stackChris Metcalf
Previously, we used a special-purpose register (SPR_SYSTEM_SAVE_K_0) to hold the CPU number and the top of the current kernel stack by using the low bits to hold the CPU number, and using the high bits to hold the address of the page just above where we'd want the kernel stack to be. That way we could initialize a new SP when first entering the kernel by just masking the SPR value and subtracting a couple of words. However, it's actually more useful to be able to place an arbitrary kernel-top value in the SPR. This allows us to create a new stack context (e.g. for virtualization) with an arbitrary top-of-stack VA. To make this work, we now store the CPU number in the high bits, above the highest legal VA bit (42 bits in the current tilegx microarchitecture). The full 42 bits are thus available to store the top of stack value. Getting the current cpu (a relatively common operation) is still fast; it's now a shift rather than a mask. We make this change only for tilegx, since tilepro has too few SPR bits to do this, and we don't need this support on tilepro anyway. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30tile: don't call show_regs_print_info() with corrupt currentChris Metcalf
We use the validate_current() API to make sure that "current" seems plausible before using it. With the new show_regs_print_info() API, we want to check that current is OK before calling it, since otherwise we will end up in a recursive panic. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30tile: fix some -Wsign-compare warningsChris Metcalf
Normally the build doesn't include these warnings, but at one point I built with -Wsign-compare, and noticed a few things that are technically bugs. This change fixes those things. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>