summaryrefslogtreecommitdiff
path: root/arch/um
AgeCommit message (Collapse)Author
2012-10-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull third pile of kernel_execve() patches from Al Viro: "The last bits of infrastructure for kernel_thread() et.al., with alpha/arm/x86 use of those. Plus sanitizing the asm glue and do_notify_resume() on alpha, fixing the "disabled irq while running task_work stuff" breakage there. At that point the rest of kernel_thread/kernel_execve/sys_execve work can be done independently for different architectures. The only pending bits that do depend on having all architectures converted are restrictred to fs/* and kernel/* - that'll obviously have to wait for the next cycle. I thought we'd have to wait for all of them done before we start eliminating the longjump-style insanity in kernel_execve(), but it turned out there's a very simple way to do that without flagday-style changes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: alpha: switch to saner kernel_execve() semantics arm: switch to saner kernel_execve() semantics x86, um: convert to saner kernel_execve() semantics infrastructure for saner ret_from_kernel_thread semantics make sure that kernel_thread() callbacks call do_exit() themselves make sure that we always have a return path from kernel_execve() ppc: eeh_event should just use kthread_run() don't bother with kernel_thread/kernel_execve for launching linuxrc alpha: get rid of switch_stack argument of do_work_pending() alpha: don't bother passing switch_stack separately from regs alpha: take SIGPENDING/NOTIFY_RESUME loop into signal.c alpha: simplify TIF_NEED_RESCHED handling
2012-10-12x86, um: convert to saner kernel_execve() semanticsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull pile 2 of execve and kernel_thread unification work from Al Viro: "Stuff in there: kernel_thread/kernel_execve/sys_execve conversions for several more architectures plus assorted signal fixes and cleanups. There'll be more (in particular, real fixes for the alpha do_notify_resume() irq mess)..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (43 commits) alpha: don't open-code trace_report_syscall_{enter,exit} Uninclude linux/freezer.h m32r: trim masks avr32: trim masks tile: don't bother with SIGTRAP in setup_frame microblaze: don't bother with SIGTRAP in setup_rt_frame() mn10300: don't bother with SIGTRAP in setup_frame() frv: no need to raise SIGTRAP in setup_frame() x86: get rid of duplicate code in case of CONFIG_VM86 unicore32: remove pointless test h8300: trim _TIF_WORK_MASK parisc: decide whether to go to slow path (tracesys) based on thread flags parisc: don't bother looping in do_signal() parisc: fix double restarts bury the rest of TIF_IRET sanitize tsk_is_polling() bury _TIF_RESTORE_SIGMASK unicore32: unobfuscate _TIF_WORK_MASK mips: NOTIFY_RESUME is not needed in TIF masks mips: merge the identical "return from syscall" per-ABI code ... Conflicts: arch/arm/include/asm/thread_info.h
2012-10-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull generic execve() changes from Al Viro: "This introduces the generic kernel_thread() and kernel_execve() functions, and switches x86, arm, alpha, um and s390 over to them." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (26 commits) s390: convert to generic kernel_execve() s390: switch to generic kernel_thread() s390: fold kernel_thread_helper() into ret_from_fork() s390: fold execve_tail() into start_thread(), convert to generic sys_execve() um: switch to generic kernel_thread() x86, um/x86: switch to generic sys_execve and kernel_execve x86: split ret_from_fork alpha: introduce ret_from_kernel_execve(), switch to generic kernel_execve() alpha: switch to generic kernel_thread() alpha: switch to generic sys_execve() arm: get rid of execve wrapper, switch to generic execve() implementation arm: optimized current_pt_regs() arm: introduce ret_from_kernel_execve(), switch to generic kernel_execve() arm: split ret_from_fork, simplify kernel_thread() [based on patch by rmk] generic sys_execve() generic kernel_execve() new helper: current_pt_regs() preparation for generic kernel_thread() um: kill thread->forking um: let signal_delivered() do SIGTRAP on singlestepping into handler ...
2012-10-10Merge branch 'for-linus-37rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML changes from Richard Weinberger: "UML receives this time only cleanups. The most outstanding change is the 'include "foo.h"' do 'include <foo.h>' conversion done by Al Viro. It touches many files, that's why the diffstat is rather big." * 'for-linus-37rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: typo in UserModeLinux-HOWTO hppfs: fix the return value of get_inode() hostfs: drop vmtruncate um: get rid of pointless include "..." where include <...> will do um: move sysrq.h out of include/shared um/x86: merge 32 and 64 bit variants of ptrace.h um/x86: merge 32 and 64bit variants of checksum.h
2012-10-09um: get rid of pointless include "..." where include <...> will doAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-10-09um: move sysrq.h out of include/sharedAl Viro
never used by userland-side objects Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-10-09Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge patches from Andrew Morton: "A few misc things and very nearly all of the MM tree. A tremendous amount of stuff (again), including a significant rbtree library rework." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (160 commits) sparc64: Support transparent huge pages. mm: thp: Use more portable PMD clearing sequenece in zap_huge_pmd(). mm: Add and use update_mmu_cache_pmd() in transparent huge page code. sparc64: Document PGD and PMD layout. sparc64: Eliminate PTE table memory wastage. sparc64: Halve the size of PTE tables sparc64: Only support 4MB huge pages and 8KB base pages. memory-hotplug: suppress "Trying to free nonexistent resource <XXXXXXXXXXXXXXXX-YYYYYYYYYYYYYYYY>" warning mm: memcg: clean up mm_match_cgroup() signature mm: document PageHuge somewhat mm: use %pK for /proc/vmallocinfo mm, thp: fix mlock statistics mm, thp: fix mapped pages avoiding unevictable list on mlock memory-hotplug: update memory block's state and notify userspace memory-hotplug: preparation to notify memory block's state at memory hot remove mm: avoid section mismatch warning for memblock_type_name make GFP_NOTRACK definition unconditional cma: decrease cc.nr_migratepages after reclaiming pagelist CMA: migrate mlocked pages kpageflags: fix wrong KPF_THP on non-huge compound pages ...
2012-10-09readahead: fault retry breaks mmap file read random detectionShaohua Li
.fault now can retry. The retry can break state machine of .fault. In filemap_fault, if page is miss, ra->mmap_miss is increased. In the second try, since the page is in page cache now, ra->mmap_miss is decreased. And these are done in one fault, so we can't detect random mmap file access. Add a new flag to indicate .fault is tried once. In the second try, skip ra->mmap_miss decreasing. The filemap_fault state machine is ok with it. I only tested x86, didn't test other archs, but looks the change for other archs is obvious, but who knows :) Signed-off-by: Shaohua Li <shaohua.li@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09Kconfig: clean up the long arch list for the UID16 config optionCatalin Marinas
Introduce HAVE_UID16 config option and select it in corresponding architecture Kconfig files. UID16 now only depends on HAVE_UID16. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-04Merge branch 'disintegrate-asm-generic' of ↵Arnd Bergmann
git://git.infradead.org/users/dhowells/linux-headers into asm-generic Patches from David Howells <dhowells@redhat.com>: This is to complete part of the UAPI disintegration for which the preparatory patches were pulled recently. Note that there are some fixup patches which are at the base of the branch aimed at you, plus all arches get the asm-generic branch merged in too. * 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate include/asm-generic UAPI: Fix conditional header installation handling (notably kvm_para.h on m68k) c6x: remove c6x signal.h UAPI: Split compound conditionals containing __KERNEL__ in Arm64 UAPI: Fix the guards on various asm/unistd.h files Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-03Merge tag 'uapi-prep-20121002' of ↵Linus Torvalds
git://git.infradead.org/users/dhowells/linux-headers Pull preparatory patches for user API disintegration from David Howells: "The patches herein prepare for the extraction of the Userspace API bits from the various header files named in the Kbuild files. New subdirectories are created under either include/uapi/ or arch/x/include/uapi/ that correspond to the subdirectory containing that file under include/ or arch/x/include/. The new subdirs under the uapi/ directory are populated with Kbuild files that mostly do nothing at this time. Further patches will disintegrate the headers in each original directory and fill in the Kbuild files as they do it. These patches also: (1) fix up #inclusions of "foo.h" rather than <foo.h>. (2) Remove some redundant #includes from the DRM code. (3) Make the kernel build infrastructure handle Kbuild files both in the old places and the new UAPI place that both specify headers to be exported. (4) Fix some kernel tools that #include kernel headers during their build. I have compile tested this with allyesconfig against x86_64, allmodconfig against i386 and a scattering of additional defconfigs of other arches. Prepared for main script Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com>" * tag 'uapi-prep-20121002' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: Plumb the UAPI Kbuilds into the user header installation and checking UAPI: x86: Differentiate the generated UAPI and internal headers UAPI: Remove the objhdr-y export list UAPI: Move linux/version.h UAPI: Set up uapi/asm/Kbuild.asm UAPI: x86: Fix insn_sanity build failure after UAPI split UAPI: x86: Fix the test_get_len tool UAPI: (Scripted) Set up UAPI Kbuild files UAPI: Partition the header include path sets and add uapi/ header directories UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel system headers UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/ UAPI: (Scripted) Remove redundant DRM UAPI header #inclusions from drivers/gpu/. UAPI: Refer to the DRM UAPI headers with <...> and from certain headers only
2012-10-03asm-generic: Add default clkdev.hMark Brown
Ease the deployment of clkdev by providing a default asm/clkdev.h for use if the arch does not have an include/asm/clkdev.h. Due to limitations in Kbuild we manually add clkdev.h to all architectures that don't have one rather than having the header appear by default. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs update from Al Viro: - big one - consolidation of descriptor-related logics; almost all of that is moved to fs/file.c (BTW, I'm seriously tempted to rename the result to fd.c. As it is, we have a situation when file_table.c is about handling of struct file and file.c is about handling of descriptor tables; the reasons are historical - file_table.c used to be about a static array of struct file we used to have way back). A lot of stray ends got cleaned up and converted to saner primitives, disgusting mess in android/binder.c is still disgusting, but at least doesn't poke so much in descriptor table guts anymore. A bunch of relatively minor races got fixed in process, plus an ext4 struct file leak. - related thing - fget_light() partially unuglified; see fdget() in there (and yes, it generates the code as good as we used to have). - also related - bits of Cyrill's procfs stuff that got entangled into that work; _not_ all of it, just the initial move to fs/proc/fd.c and switch of fdinfo to seq_file. - Alex's fs/coredump.c spiltoff - the same story, had been easier to take that commit than mess with conflicts. The rest is a separate pile, this was just a mechanical code movement. - a few misc patches all over the place. Not all for this cycle, there'll be more (and quite a few currently sit in akpm's tree)." Fix up trivial conflicts in the android binder driver, and some fairly simple conflicts due to two different changes to the sock_alloc_file() interface ("take descriptor handling from sock_alloc_file() to callers" vs "net: Providing protocol type via system.sockprotoname xattr of /proc/PID/fd entries" adding a dentry name to the socket) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (72 commits) MAX_LFS_FILESIZE should be a loff_t compat: fs: Generic compat_sys_sendfile implementation fs: push rcu_barrier() from deactivate_locked_super() to filesystems btrfs: reada_extent doesn't need kref for refcount coredump: move core dump functionality into its own file coredump: prevent double-free on an error path in core dumper usb/gadget: fix misannotations fcntl: fix misannotations ceph: don't abuse d_delete() on failure exits hypfs: ->d_parent is never NULL or negative vfs: delete surplus inode NULL check switch simple cases of fget_light to fdget new helpers: fdget()/fdput() switch o2hb_region_dev_write() to fget_light() proc_map_files_readdir(): don't bother with grabbing files make get_file() return its argument vhost_set_vring(): turn pollstart/pollstop into bool switch prctl_set_mm_exe_file() to fget_light() switch xfs_find_handle() to fget_light() switch xfs_swapext() to fget_light() ...
2012-10-02UAPI: Partition the header include path sets and add uapi/ header directoriesDavid Howells
Partition the header include path flags into two sets, one for kernelspace builds and one for userspace builds. Add the following directories to build after the ordinary include directories so that #include will pick up the UAPI header directly if the kernel header has been moved there. The userspace set (represented by the USERINCLUDE make variable) contains: -I $(srctree)/arch/$(hdr-arch)/include/uapi -I arch/$(hdr-arch)/include/generated/uapi -I $(srctree)/include/uapi -I include/generated/uapi -include $(srctree)/include/linux/kconfig.h and the kernelspace set (represented by the LINUXINCLUDE make variable) contains: -I $(srctree)/arch/$(hdr-arch)/include -I arch/$(hdr-arch)/include/generated -I $(srctree)/include -I include --- if not building in the source tree plus everything in the USERINCLUDE set. Then use USERINCLUDE in building the x86 boot code. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-10-01Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds
Pull TTY changes from Greg Kroah-Hartman: "As we skipped the merge window for 3.6-rc1 for the tty tree, everything is now settled down and working properly, so we are ready for 3.7-rc1. Here's the patchset, it's big, but the large changes are removing a firmware file and adding a staging tty driver (it depended on the tty core changes, so it's going through this tree instead of the staging tree.) All of these patches have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up more-or-less trivial conflicts in - drivers/char/pcmcia/synclink_cs.c: tty NULL dereference fix vs tty_port_cts_enabled() helper function - drivers/staging/{Kconfig,Makefile}: add-add conflict (dgrp driver added close to other staging drivers) - drivers/staging/ipack/devices/ipoctal.c: "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device" * tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits) tty/serial: Add kgdb_nmi driver tty/serial/amba-pl011: Quiesce interrupts in poll_get_char tty/serial/amba-pl011: Implement poll_init callback tty/serial/core: Introduce poll_init callback kdb: Turn KGDB_KDB=n stubs into static inlines kdb: Implement disable_nmi command kernel/debug: Mask KGDB NMI upon entry serial: pl011: handle corruption at high clock speeds serial: sccnxp: Make 'default' choice in switch last serial: sccnxp: Remove mask termios caps for SW flow control serial: sccnxp: Report actual baudrate back to core serial: samsung: Add poll_get_char & poll_put_char Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate Powerpc 8xx CPM_UART maxidl should not depend on fifo size Powerpc 8xx CPM_UART too many interrupts Powerpc 8xx CPM_UART desynchronisation serial: set correct baud_base for EXSYS EX-41092 Dual 16950 serial: omap: fix the reciever line error case 8250: blacklist Winbond CIR port 8250_pnp: do pnp probe before legacy probe ...
2012-10-01Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU changes from Ingo Molnar: 0. 'idle RCU': Adds RCU APIs that allow non-idle tasks to enter RCU idle mode and provides x86 code to make use of them, allowing RCU to treat user-mode execution as an extended quiescent state when the new RCU_USER_QS kernel configuration parameter is specified. (Work is in progress to port this to a few other architectures, but is not part of this series.) 1. A fix for a latent bug that has been in RCU ever since the addition of CPU stall warnings. This bug results in false-positive stall warnings, but thus far only on embedded systems with severely cut-down userspace configurations. 2. Further reductions in latency spikes for huge systems, along with additional boot-time adaptation to the actual hardware. This is a large change, as it moves RCU grace-period initialization and cleanup, along with quiescent-state forcing, from softirq to a kthread. However, it appears to be in quite good shape (famous last words). 3. Updates to documentation and rcutorture, the latter category including keeping statistics on CPU-hotplug latencies and fixing some initialization-time races. 4. CPU-hotplug fixes and improvements. 5. Idle-loop fixes that were omitted on an earlier submission. 6. Miscellaneous fixes and improvements In certain RCU configurations new kernel threads will show up (rcu_bh, rcu_sched), showing RCU processing overhead. * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (90 commits) rcu: Apply micro-optimization and int/bool fixes to RCU's idle handling rcu: Userspace RCU extended QS selftest x86: Exit RCU extended QS on notify resume x86: Use the new schedule_user API on userspace preemption rcu: Exit RCU extended QS on user preemption rcu: Exit RCU extended QS on kernel preemption after irq/exception x86: Exception hooks for userspace RCU extended QS x86: Unspaghettize do_general_protection() x86: Syscall hooks for userspace RCU extended QS rcu: Switch task's syscall hooks on context switch rcu: Ignore userspace extended quiescent state by default rcu: Allow rcu_user_enter()/exit() to nest rcu: Settle config for userspace extended quiescent state rcu: Make RCU_FAST_NO_HZ handle adaptive ticks rcu: New rcu_user_enter_after_irq() and rcu_user_exit_after_irq() APIs rcu: New rcu_user_enter() and rcu_user_exit() APIs ia64: Add missing RCU idle APIs on idle loop xtensa: Add missing RCU idle APIs on idle loop score: Add missing RCU idle APIs on idle loop parisc: Add missing RCU idle APIs on idle loop ...
2012-10-01sanitize tsk_is_polling()Al Viro
Make default just return 0. The current default (checking TIF_POLLING_NRFLAG) is taken to architectures that need it; ones that don't do polling in their idle threads don't need to defined TIF_POLLING_NRFLAG at all. ia64 defined both TS_POLLING (used by its tsk_is_polling()) and TIF_POLLING_NRFLAG (not used at all). Killed the latter... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-01um: switch to generic kernel_thread()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-01x86, um/x86: switch to generic sys_execve and kernel_execveAl Viro
32bit wrapper is lost on that; 64bit one is *not*, since we need to arrange for full pt_regs on stack when we call sys_execve() and we need to load callee-saved ones from there afterwards. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27um: Preinclude include/linux/kern_levels.hGeert Uytterhoeven
The userspace part of UML uses the asm-offsets.h generator mechanism to create definitions for UM_KERN_<LEVEL> that match the in-kernel KERN_<LEVEL> constant definitions. As of commit 04d2c8c83d0e3ac5f78aeede51babb3236200112 ("printk: convert the format for KERN_<LEVEL> to a 2 byte pattern"), KERN_<LEVEL> is no longer expanded to the literal '"<LEVEL>"', but to '"\001" "LEVEL"', i.e. it contains two parts. However, the combo of DEFINE_STR() in arch/x86/um/shared/sysdep/kernel-offsets.h and sed-y in Kbuild doesn't support string literals consisting of multiple parts. Hence for all UM_KERN_<LEVEL> definitions, only the SOH character is retained in the actual definition, while the remainder ends up in the comment. E.g. in include/generated/asm-offsets.h we get #define UM_KERN_INFO "\001" /* "6" KERN_INFO */ instead of #define UM_KERN_INFO "\001" "6" /* KERN_INFO */ This causes spurious '^A' output in some kernel messages: Calibrating delay loop... 4640.76 BogoMIPS (lpj=23203840) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 ^AChecking that host ptys support output SIGIO...Yes ^AChecking that host ptys support SIGIO on close...No, enabling workaround ^AUsing 2.6 host AIO NET: Registered protocol family 16 bio: create slab <bio-0> at 0 Switching to clocksource itimer To fix this: - Move the mapping from UM_KERN_<LEVEL> to KERN_<LEVEL> from arch/um/include/shared/common-offsets.h to arch/um/include/shared/user.h, which is preincluded for all userspace parts, - Preinclude include/linux/kern_levels.h for all userspace parts, to obtain the in-kernel KERN_<LEVEL> constant definitions. This doesn't violate the kernel/userspace separation, as include/linux/kern_levels.h is self-contained and doesn't expose any other kernel internals. - Remove the now unused STR() and DEFINE_STR() macros. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-09-27um: kill thread->forkingAl Viro
we only use that to tell copy_thread() done by syscall from that done by kernel_thread(). However, it's easier to do simply by checking PF_KTHREAD in thread flags. Merge sys_clone() guts for 32bit and 64bit, while we are at it... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27um: let signal_delivered() do SIGTRAP on singlestepping into handlerAl Viro
... rather than duplicating that in sigframe setup code (and doing that inconsistently, at that) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27um: don't leak floating point state and segment registers on execve()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27um: take cleaning singlestep to start_thread()Al Viro
... assuming it's needed to be done at all Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27um: resurrect the right variant of mconsole_proc()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26rcu: Switch task's syscall hooks on context switchFrederic Weisbecker
Clear the syscalls hook of a task when it's scheduled out so that if the task migrates, it doesn't run the syscall slow path on a CPU that might not need it. Also set the syscalls hook on the next task if needed. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Alessio Igor Bogani <abogani@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Avi Kivity <avi@redhat.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kevin Hilman <khilman@ti.com> Cc: Max Krasnyansky <maxk@qualcomm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-20um: kill thread->forkingAl Viro
we only use that to tell copy_thread() done by syscall from that done by kernel_thread(). However, it's easier to do simply by checking PF_KTHREAD in thread flags. Merge sys_clone() guts for 32bit and 64bit, while we are at it... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-20um: let signal_delivered() do SIGTRAP on singlestepping into handlerAl Viro
... rather than duplicating that in sigframe setup code (and doing that inconsistently, at that) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-20um: don't leak floating point state and segment registers on execve()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-20um: take cleaning singlestep to start_thread()Al Viro
... assuming it's needed to be done at all Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-17Merge 3.6-rc6 into tty-nextGreg Kroah-Hartman
This pulls in the fixes in 3.6-rc6 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06uml: fix compile error in deliver_alarm()Miklos Szeredi
Fix the following compile error on UML. arch/um/os-Linux/time.c: In function 'deliver_alarm': arch/um/os-Linux/time.c:117:3: error: too few arguments to function 'alarm_handler' arch/um/os-Linux/internal.h:1:6: note: declared here The error was introduced by commit d3c1cfcd ("um: pass siginfo to guest process") in 3.6-rc1. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Martin Pärtel <martin.partel@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-13TTY: use tty_port_register_deviceJiri Slaby
Currently we have no way to assign tty->port while performing tty installation. There are two ways to provide the link tty_struct => tty_port. Either by calling tty_port_install from tty->ops->install or tty_port_register_device called instead of tty_register_device when the device is being set up after connected. In this patch we modify most of the drivers to do the latter. When the drivers use tty_register_device and we have tty_port already, we switch to tty_port_register_device. So we have the tty_struct => tty_port link for free for those. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-01Merge branch 'for-linus-3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML fixes from Richard Weinberger: "This patch set contains mostly fixes and cleanups. The UML tty driver uses now tty_port and is no longer broken like hell :-)" * 'for-linus-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Add arch/x86/um to MAINTAINERS um: pass siginfo to guest process um: fix ubd_file_size for read-only files um: pull interrupt_end() into userspace() um: split syscall_trace(), pass pt_regs to it um: switch UPT_SET_RETURN_VALUE and regs_return_value to pt_regs um: set BLK_CGROUP=y in defconfig um: remove count_lock um: fully use tty_port um: Remove dead code um: remove line_ioctl() TTY: um/line, use tty from tty_port TTY: um/line, add tty_port
2012-08-01um: pass siginfo to guest processMartin Pärtel
UML guest processes now get correct siginfo_t for SIGTRAP, SIGFPE, SIGILL and SIGBUS. Specifically, si_addr and si_code are now correct where previously they were si_addr = NULL and si_code = 128. Signed-off-by: Martin Pärtel <martin.partel@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-08-01um: fix ubd_file_size for read-only filesMartin Pärtel
Made ubd_file_size not request write access. Fixes use of read-only images. Signed-off-by: Martin Pärtel <martin.partel@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-08-01um: pull interrupt_end() into userspace()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-08-01um: split syscall_trace(), pass pt_regs to itAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [richard@nod.at: Fixed some minor build issues] Signed-off-by: Richard Weinberger <richard@nod.at>
2012-08-01um: switch UPT_SET_RETURN_VALUE and regs_return_value to pt_regsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-08-01Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge Andrew's second set of patches: - MM - a few random fixes - a couple of RTC leftovers * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits) rtc/rtc-88pm80x: remove unneed devm_kfree rtc/rtc-88pm80x: assign ret only when rtc_register_driver fails mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables tmpfs: distribute interleave better across nodes mm: remove redundant initialization mm: warn if pg_data_t isn't initialized with zero mips: zero out pg_data_t when it's allocated memcg: gix memory accounting scalability in shrink_page_list mm/sparse: remove index_init_lock mm/sparse: more checks on mem_section number mm/sparse: optimize sparse_index_alloc memcg: add mem_cgroup_from_css() helper memcg: further prevent OOM with too many dirty pages memcg: prevent OOM with too many dirty pages mm: mmu_notifier: fix freed page still mapped in secondary MMU mm: memcg: only check anon swapin page charges for swap cache mm: memcg: only check swap cache pages for repeated charging mm: memcg: split swapin charge function into private and public part mm: memcg: remove needless !mm fixup to init_mm when charging mm: memcg: remove unneeded shmem charge type ...
2012-08-01Merge tag 'random_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random subsystem patches from Ted Ts'o: "This patch series contains a major revamp of how we collect entropy from interrupts for /dev/random and /dev/urandom. The goal is to addresses weaknesses discussed in the paper "Mining your Ps and Qs: Detection of Widespread Weak Keys in Network Devices", by Nadia Heninger, Zakir Durumeric, Eric Wustrow, J. Alex Halderman, which will be published in the Proceedings of the 21st Usenix Security Symposium, August 2012. (See https://factorable.net for more information and an extended version of the paper.)" Fix up trivial conflicts due to nearby changes in drivers/{mfd/ab3100-core.c, usb/gadget/omap_udc.c} * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (33 commits) random: mix in architectural randomness in extract_buf() dmi: Feed DMI table to /dev/random driver random: Add comment to random_initialize() random: final removal of IRQF_SAMPLE_RANDOM um: remove IRQF_SAMPLE_RANDOM which is now a no-op sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op [ARM] pxa: remove IRQF_SAMPLE_RANDOM which is now a no-op board-palmz71: remove IRQF_SAMPLE_RANDOM which is now a no-op isp1301_omap: remove IRQF_SAMPLE_RANDOM which is now a no-op pxa25x_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op omap_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op goku_udc: remove IRQF_SAMPLE_RANDOM which was commented out uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op drivers: hv: remove IRQF_SAMPLE_RANDOM which is now a no-op xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op n2_crypto: remove IRQF_SAMPLE_RANDOM which is now a no-op pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-op input/serio/hp_sdc.c: remove IRQF_SAMPLE_RANDOM which is now a no-op mfd: remove IRQF_SAMPLE_RANDOM which is now a no-op ...
2012-08-01memcg: rename config variablesAndrew Morton
Sanity: CONFIG_CGROUP_MEM_RES_CTLR -> CONFIG_MEMCG CONFIG_CGROUP_MEM_RES_CTLR_SWAP -> CONFIG_MEMCG_SWAP CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED -> CONFIG_MEMCG_SWAP_ENABLED CONFIG_CGROUP_MEM_RES_CTLR_KMEM -> CONFIG_MEMCG_KMEM [mhocko@suse.cz: fix missed bits] Cc: Glauber Costa <glommer@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-28um: set BLK_CGROUP=y in defconfigRichard Weinberger
BLK_CGROUP=m is no longer valid. Signed-off-by: Richard Weinberger <richard@nod.at>
2012-07-28um: remove count_lockRichard Weinberger
this lock is no longer needed. Signed-off-by: Richard Weinberger <richard@nod.at>
2012-07-28um: fully use tty_portRichard Weinberger
... use all tty_port helpers Signed-off-by: Richard Weinberger <richard@nod.at>
2012-07-28um: Remove dead codeRichard Weinberger
Signed-off-by: Richard Weinberger <richard@nod.at>
2012-07-28um: remove line_ioctl()Richard Weinberger
line_ioctl() has no real function. Signed-off-by: Richard Weinberger <richard@nod.at>
2012-07-28TTY: um/line, use tty from tty_portJiri Slaby
This means switching to the tty refcounted model so that we will not race with interrupts. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: user-mode-linux-devel@lists.sourceforge.net Signed-off-by: Richard Weinberger <richard@nod.at>
2012-07-28TTY: um/line, add tty_portJiri Slaby
And use count from there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: user-mode-linux-devel@lists.sourceforge.net Signed-off-by: Richard Weinberger <richard@nod.at>