| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
This makes OpAccHi useful.
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Single-operand MUL and DIV access an extended accumulator: AX for byte
instructions, and DX:AX, EDX:EAX, or RDX:RAX for larger-sized instructions.
Add support for fetching the extended accumulator.
In order not to change things too much, RDX is loaded into Src2, which is
already loaded by fastop(). This avoids increasing register pressure on
i386.
Gleb: disable src writeback for ByteOp div/mul.
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Some instructions write back the source operand, not just the destination.
Add support for doing this via the decode flags.
Gleb: add BUG_ON() to prevent source to be memory operand.
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
As requested by the KVM maintainers, remove the addprefix used to
refer to the main KVM code from the arch code, and replace it with
a KVM variable that does the same thing.
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Christoffer Dall <cdall@cs.columbia.edu>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Do locking around each case separately instead of having one lock and two
unlocks. Move root_hpa assignment out of the lock.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
kvmclock updates which are isolated to a given vcpu, such as vcpu->cpu
migration, should not allow system_timestamp from the rest of the vcpus
to remain static. Otherwise ntp frequency correction applies to one
vcpu's system_timestamp but not the others.
So in those cases, request a kvmclock update for all vcpus. The worst
case for a remote vcpu to update its kvmclock is then bounded by maximum
nohz sleep latency.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Since the arrival of posted interrupt support we can no longer guarantee
that coalesced IRQs are always reported to the IRQ source. Moreover,
accumulated APIC timer events could cause a busy loop when a VCPU should
rather be halted. The consensus is to remove coalesced tracking from the
LAPIC.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
No need to open-code this function.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
This is an almost-undocumented instruction available in 32-bit mode.
I say "almost" undocumented because AMD documents it in their opcode
maps just to say that it is unavailable in 64-bit mode (sections
"A.2.1 One-Byte Opcodes" and "B.3 Invalid and Reassigned Instructions
in 64-Bit Mode").
It is roughly equivalent to "sbb %al, %al" except it does not
set the flags. Use fastop to emulate it, but do not use the opcode
directly because it would fail if the host is 64-bit!
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@vger.kernel.org # 3.9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
This is used by SGABIOS, KVM breaks with emulate_invalid_guest_state=1.
It is just a MOV in disguise, with a funny source address.
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@vger.kernel.org # 3.9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
This is used by SGABIOS, KVM breaks with emulate_invalid_guest_state=1.
AAM needs the source operand to be unsigned; do the same in AAD as well
for consistency, even though it does not affect the result.
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@vger.kernel.org # 3.9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
The invalid guest state emulation loop does not check halt_request
which causes 100% cpu loop while guest is in halt and in invalid
state, but more serious issue is that this leaves halt_request set, so
random instruction emulated by vm86 #GP exit can be interpreted
as halt which causes guest hang. Fix both problems by handling
halt_request in emulation loop.
Reported-by: Tomas Papan <tomas.papan@gmail.com>
Tested-by: Tomas Papan <tomas.papan@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
CC: stable@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Emulation of xcr0 writes zero guest_xcr0_loaded variable so that
subsequent VM-entry reloads CPU's xcr0 with guests xcr0 value.
However, this is incorrect because guest_xcr0_loaded variable is
read to decide whether to reload hosts xcr0.
In case the vcpu thread is scheduled out after the guest_xcr0_loaded = 0
assignment, and scheduler decides to preload FPU:
switch_to
{
__switch_to
__math_state_restore
restore_fpu_checking
fpu_restore_checking
if (use_xsave())
fpu_xrstor_checking
xrstor64 with CPU's xcr0 == guests xcr0
Fix by properly restoring hosts xcr0 during emulation of xcr0 writes.
Analyzed-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Pull kvm updates from Gleb Natapov:
"Highlights of the updates are:
general:
- new emulated device API
- legacy device assignment is now optional
- irqfd interface is more generic and can be shared between arches
x86:
- VMCS shadow support and other nested VMX improvements
- APIC virtualization and Posted Interrupt hardware support
- Optimize mmio spte zapping
ppc:
- BookE: in-kernel MPIC emulation with irqfd support
- Book3S: in-kernel XICS emulation (incomplete)
- Book3S: HV: migration fixes
- BookE: more debug support preparation
- BookE: e6500 support
ARM:
- reworking of Hyp idmaps
s390:
- ioeventfd for virtio-ccw
And many other bug fixes, cleanups and improvements"
* tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
kvm: Add compat_ioctl for device control API
KVM: x86: Account for failing enable_irq_window for NMI window request
KVM: PPC: Book3S: Add API for in-kernel XICS emulation
kvm/ppc/mpic: fix missing unlock in set_base_addr()
kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write
kvm/ppc/mpic: remove users
kvm/ppc/mpic: fix mmio region lists when multiple guests used
kvm/ppc/mpic: remove default routes from documentation
kvm: KVM_CAP_IOMMU only available with device assignment
ARM: KVM: iterate over all CPUs for CPU compatibility check
KVM: ARM: Fix spelling in error message
ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally
KVM: ARM: Fix API documentation for ONE_REG encoding
ARM: KVM: promote vfp_host pointer to generic host cpu context
ARM: KVM: add architecture specific hook for capabilities
ARM: KVM: perform HYP initilization for hotplugged CPUs
ARM: KVM: switch to a dual-step HYP init code
ARM: KVM: rework HYP page table freeing
ARM: KVM: enforce maximum size for identity mapped code
ARM: KVM: move to a KVM provided HYP idmap
...
|
|
With VMX, enable_irq_window can now return -EBUSY, in which case an
immediate exit shall be requested before entering the guest. Account for
this also in enable_nmi_window which uses enable_irq_window in absence
of vnmi support, e.g.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 paravirt update from Ingo Molnar:
"Various paravirtualization related changes - the biggest one makes
guest support optional via CONFIG_HYPERVISOR_GUEST"
* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, wakeup, sleep: Use pvops functions for changing GDT entries
x86, xen, gdt: Remove the pvops variant of store_gdt.
x86-32, gdt: Store/load GDT for ACPI S3 or hibernation/resume path is not needed
x86-64, gdt: Store/load GDT for ACPI S3 or hibernate/resume path is not needed.
x86: Make Linux guest support optional
x86, Kconfig: Move PARAVIRT_DEBUG into the paravirt menu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid changes from Ingo Molnar:
"The biggest change is x86 CPU bug handling refactoring and cleanups,
by Borislav Petkov"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, CPU, AMD: Drop useless label
x86, AMD: Correct {rd,wr}msr_amd_safe warnings
x86: Fold-in trivial check_config function
x86, cpu: Convert AMD Erratum 400
x86, cpu: Convert AMD Erratum 383
x86, cpu: Convert Cyrix coma bug detection
x86, cpu: Convert FDIV bug detection
x86, cpu: Convert F00F bug detection
x86, cpu: Expand cpufeature facility to include cpu bugs
|
|
Fix build with CONFIG_PCI unset by linking KVM_CAP_IOMMU to
device assignment config option. It has no purpose otherwise.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
While a nested run is pending, vmx_queue_exception is only called to
requeue exceptions that were previously picked up via
vmx_cancel_injection. Therefore, we must not check for PF interception
by L1, possibly causing a bogus nested vmexit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
We hope to at some point deprecate KVM legacy device assignment in
favor of VFIO-based assignment. Towards that end, allow legacy
device assignment to be deconfigured.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
|
|
The VMX implementation of enable_irq_window raised
KVM_REQ_IMMEDIATE_EXIT after we checked it in vcpu_enter_guest. This
caused infinite loops on vmentry. Fix it by letting enable_irq_window
signal the need for an immediate exit via its return value and drop
KVM_REQ_IMMEDIATE_EXIT.
This issue only affects nested VMX scenarios.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
It is "exit_int_info". It is actually EXITINTINFO in the official docs
but we don't like screaming docs.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Slipped in while copy&pasting from the SDM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Now that we have most irqfd code completely platform agnostic, let's move
irqfd's resample capability return to generic code as well.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The current irq_comm.c file contains pieces of code that are generic
across different irqchip implementations, as well as code that is
fully IOAPIC specific.
Split the generic bits out into irqchip.c.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Quite a bit of code in KVM has been conditionalized on availability of
IOAPIC emulation. However, most of it is generically applicable to
platforms that don't have an IOPIC, but a different type of irq chip.
Make code that only relies on IRQ routing, not an APIC itself, on
CONFIG_HAVE_KVM_IRQ_ROUTING, so that we can reuse it later.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Source operand for one byte mov[zs]x is decoded incorrectly if it is in
high byte register. Fix that.
Cc: stable@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
If we load the complete EFER MSR on entry or exit, EFER.LMA (and LME)
loading is skipped. Their consistency is already checked now before
starting the transition.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
As we may emulate the loading of EFER on VM-entry and VM-exit, implement
the checks that VMX performs on the guest and host values on vmlaunch/
vmresume. Factor out kvm_valid_efer for this purpose which checks for
set reserved bits.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
The logic for checking if interrupts can be injected has to be applied
also on NMIs. The difference is that if NMI interception is on these
events are consumed and blocked by the VM exit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
vmx_set_nmi_mask will soon be used by vmx_nmi_allowed. No functional
changes.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
If userspace creates and destroys multiple VMs within the same process
we leak 20k of memory in the userspace process context per VM. This
patch frees the memory in kvm_arch_destroy_vm. If the process exits
without closing the VM file descriptor or the file descriptor has been
shared with another process then we don't free the memory.
It's still possible for a user space process to leak memory if the last
process to close the fd for the VM is not the process that created it.
However, this is an unexpected case that's only caused by a user space
process that's misbehaving.
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Once L1 loads VMCS12 we enable shadow-vmcs capability and copy all the VMCS12
shadowed fields to the shadow vmcs. When we release the VMCS12, we also
disable shadow-vmcs capability.
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Synchronize between the VMCS12 software controlled structure and the
processor-specific shadow vmcs
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Introduce a function used to copy fields from the software controlled VMCS12
to the processor-specific shadow vmcs
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Introduce a function used to copy fields from the processor-specific shadow
vmcs to the software controlled VMCS12
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Unmap vmcs12 and release the corresponding shadow vmcs
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Allocate a shadow vmcs used by the processor to shadow part of the fields
stored in the software defined VMCS12 (let L1 access fields without causing
exits). Note we keep a shadow vmcs only for the current vmcs12. Once a vmcs12
becomes non-current, its shadow vmcs is released.
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
handle_vmon doesn't check if L1 is already in root mode (VMXON
was previously called). This patch adds this missing check and calls
nested_vmx_failValid if VMX is already ON.
We need this check because L0 will allocate the shadow vmcs when L1
executes VMXON and we want to avoid host leaks (due to shadow vmcs
allocation) if L1 executes VMXON repeatedly.
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Refactor existent code so we re-use vmcs12_write_any to copy fields from the
shadow vmcs specified by the link pointer (used by the processor,
implementation-specific) to the VMCS12 software format used by L0 to hold
the fields in L1 memory address space.
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Prepare vmread and vmwrite bitmaps according to a pre-specified list of fields.
These lists are intended to specifiy most frequent accessed fields so we can
minimize the number of fields that are copied from/to the software controlled
VMCS12 format to/from to processor-specific shadow vmcs. The lists were built
measuring the VMCS fields access rate after L2 Ubuntu 12.04 booted when it was
running on top of L1 KVM, also Ubuntu 12.04. Note that during boot there were
additional fields which were frequently modified but they were not added to
these lists because after boot these fields were not longer accessed by L1.
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
Add logic required to detect if shadow-vmcs is supported by the
processor. Introduce a new kernel module parameter to specify if L0 should use
shadow vmcs (or not) to run L1.
Signed-off-by: Abel Gordon <abelg@il.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
|
|
->send_IPI_mask is not defined on UP.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
If guest vcpu is in VM86 mode the vcpu state should be checked as if in
real mode.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
KVM does not use the activity state VMCS field, and does not support
it in nested VMX either (the corresponding bits in the misc VMX feature
MSR are zero). Fail entry if the activity state is set to anything but
"active".
Since the value will always be the same for L1 and L2, we do not need
to read and write the corresponding VMCS field on L1/L2 transitions,
either.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
If posted interrupt is avaliable, then uses it to inject virtual
interrupt to guest.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
