summaryrefslogtreecommitdiff
path: root/arch/x86/pci
AgeCommit message (Collapse)Author
2010-05-22Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (36 commits) PCI: hotplug: pciehp: Removed check for hotplug of display devices PCI: read memory ranges out of Broadcom CNB20LE host bridge PCI: Allow manual resource allocation for PCI hotplug bridges x86/PCI: make ACPI MCFG reserved error messages ACPI specific PCI hotplug: Use kmemdup PM/PCI: Update PCI power management documentation PCI: output FW warning in pci_read/write_vpd PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in comments PCI quirks: disable msi on AMD rs4xx internal gfx bridges PCI: Disable MSI for MCP55 on P5N32-E SLI x86/PCI: irq and pci_ids patch for additional Intel Cougar Point DeviceIDs PCI: aerdrv: trivial cleanup for aerdrv_core.c PCI: aerdrv: trivial cleanup for aerdrv.c PCI: aerdrv: introduce default_downstream_reset_link PCI: aerdrv: rework find_aer_service PCI: aerdrv: remove is_downstream PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRC PCI: aerdrv: rework do_recovery PCI: aerdrv: rework get_e_source() ...
2010-05-21PCI: read memory ranges out of Broadcom CNB20LE host bridgeIra W. Snyder
Read the memory ranges behind the Broadcom CNB20LE host bridge out of the hardware. This allows PCI hotplugging to work, since we know which memory range to allocate PCI BAR's from. The x86 PCI code automatically prefers the ACPI _CRS information when it is available. In that case, this information is not used. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18x86/PCI: make ACPI MCFG reserved error messages ACPI specificFeng Tang
Both ACPI and SFI firmwares will have MCFG space, but the error message isn't valid on SFI, so don't print the message in that case. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18Merge branch 'x86-mrst-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mrst: add nop functions to x86_init mpparse functions x86, mrst, pci: return 0 for non-present pci bars x86: Avoid check hlt for newer cpus
2010-05-17x86, mrst, pci: return 0 for non-present pci barsJacob Pan
Moorestown PCI code has special handling of devices with fixed BARs. In case of BAR sizing writes, we need to update the fake PCI MMCFG space with real size decode value. When a BAR is not present, we need to return 0 instead of ~0. ~0 will be treated as device error per bugzilla 12006. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> LKML-Reference: <1273873281-17489-2-git-send-email-jacob.jun.pan@linux.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-05-14x86, mrst: Don't blindly access extended config spaceH. Peter Anvin
Do not blindly access extended configuration space unless we actively know we're on a Moorestown platform. The fixed-size BAR capability lives in the extended configuration space, and thus is not applicable if the configuration space isn't appropriately sized. This fixes booting certain VMware configurations with CONFIG_MRST=y. Moorestown will add a fake PCI-X 266 capability to advertise the presence of extended configuration space. Reported-and-tested-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Jacob Pan <jacob.jun.pan@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <AANLkTiltKUa3TrKR1M51eGw8FLNoQJSLT0k0_K5X3-OJ@mail.gmail.com>
2010-05-11x86/PCI: irq and pci_ids patch for additional Intel Cougar Point DeviceIDsSeth Heasley
This patch adds additional LPC Controller DeviceIDs for the Intel Cougar Point PCH. The DeviceIDs are defined and referenced as a range of values, the same way Ibex Peak was implemented. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11x86/PCI: Convert pci_config_lock to raw_spinlockThomas Gleixner
pci_config_lock must be a real spinlock in preempt-rt. Convert it to raw_spinlock. No change for !RT kernels. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-28x86/PCI: compute Address Space length rather than using _LENBjorn Helgaas
ACPI _CRS Address Space Descriptors have _MIN, _MAX, and _LEN. Linux has been computing Address Spaces as [_MIN to _MIN + _LEN - 1]. Based on the tests in the bug reports below, Windows apparently uses [_MIN to _MAX]. Per spec (ACPI 4.0, Table 6-40), for _CRS fixed-size, fixed location descriptors, "_LEN must be (_MAX - _MIN + 1)", and when that's true, it doesn't matter which way we compute the end. But of course, there are BIOSes that don't follow this rule, and we're better off if Linux handles those exceptions the same way as Windows. This patch makes Linux use [_MIN to _MAX], as Windows seems to do. This effectively reverts d558b483d5 and 03db42adfe and replaces them with simpler code. https://bugzilla.kernel.org/show_bug.cgi?id=14337 (round) https://bugzilla.kernel.org/show_bug.cgi?id=15480 (truncate) Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-26x86/PCI: never allocate PCI MMIO resources below BIOS_ENDBjorn Helgaas
When we move a PCI device or assign resources to a device not configured by the BIOS, we want to avoid the BIOS region below 1MB. Note that if the BIOS places devices below 1MB, we leave them there. See https://bugzilla.kernel.org/show_bug.cgi?id=15744 and https://bugzilla.kernel.org/show_bug.cgi?id=15841 Tested-by: Andy Isaacson <adi@hexapodia.org> Tested-by: Andy Bailey <bailey@akamai.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-22x86/PCI: parse additional host bridge window resource typesBjorn Helgaas
This adds support for Memory24, Memory32, and Memory32Fixed descriptors in PCI host bridge _CRS. I experimentally determined that Windows (2008 R2) accepts these descriptors and treats them as windows that are forwarded to the PCI bus, e.g., if it finds any PCI devices with BARs outside the windows, it moves them into the windows. I don't know whether any machines actually use these descriptors in PCI host bridge _CRS methods, but if any exist and they're new enough that we automatically turn on "pci=use_crs", they will work with Windows but not with Linux. Here are the details: https://bugzilla.kernel.org/show_bug.cgi?id=15817 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-08x86/PCI: ignore Consumer/Producer bit in ACPI window descriptionsBjorn Helgaas
ACPI Address Space Descriptors (used in _CRS) have a Consumer/Producer bit that is supposed to distinguish regions that are consumed directly by a device from those that are forwarded ("produced") by a bridge. But BIOSes have apparently not used this consistently, and Windows seems to ignore it, so I think Linux should ignore it as well. I can't point to any of these supposed broken BIOSes, but since we now rely on _CRS by default, I think it's safer to ignore this bit from the start. Here are details of my experiments with how Windows handles it: https://bugzilla.kernel.org/show_bug.cgi?id=15701 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-25x86/PCI: truncate _CRS windows with _LEN > _MAX - _MIN + 1Bjorn Helgaas
Yanko's GA-MA78GM-S2H (BIOS F11) reports the following resource in a PCI host bridge _CRS: [07] 32-Bit DWORD Address Space Resource Min Relocatability : MinFixed Max Relocatability : MaxFixed Address Minimum : CFF00000 (_MIN) Address Maximum : FEBFFFFF (_MAX) Address Length : 3EE10000 (_LEN) This is invalid per spec (ACPI 4.0, 6.4.3.5) because it's a fixed size, fixed location descriptor, but _LEN != _MAX - _MIN + 1. Based on https://bugzilla.kernel.org/show_bug.cgi?id=15480#c15, I think Windows handles this by truncating the window so it fits between _MIN and _MAX. I also verified this by modifying the SeaBIOS DSDT and booting Windows 2008 R2 with qemu. This patch makes Linux truncate the window, too, which fixes: http://bugzilla.kernel.org/show_bug.cgi?id=15480 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Tested-by: Yanko Kaneti <yaneti@declera.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-25x86/PCI: for host bridge address space collisions, show conflicting resourceBjorn Helgaas
With insert_resource_conflict(), we can learn what the actual conflict is, so print that info for debugging purposes. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-25x86/PCI: remove redundant warningsBjorn Helgaas
pci_claim_resource() already prints more detailed error messages, so these are really redundant. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-07Merge branch 'x86-mrst-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits) x86, mrst: Fix whitespace breakage in apb_timer.c x86, mrst: Fix APB timer per cpu clockevent x86, mrst: Remove X86_MRST dependency on PCI_IOAPIC x86, olpc: Use pci subarch init for OLPC x86, pci: Add arch_init to x86_init abstraction x86, mrst: Add Kconfig dependencies for Moorestown x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=n x86, numaq: Make CONFIG_X86_NUMAQ depend on CONFIG_PCI x86, pci: Add sanity check for PCI fixed bar probing x86, legacy_irq: Remove duplicate vector assigment x86, legacy_irq: Remove left over nr_legacy_irqs x86, mrst: Platform clock setup code x86, apbt: Moorestown APB system timer driver x86, mrst: Add vrtc platform data setup code x86, mrst: Add platform timer info parsing code x86, mrst: Fill in PCI functions in x86_init layer x86, mrst: Add dummy legacy pic to platform setup x86/PCI: Moorestown PCI support x86, ioapic: Add dummy ioapic functions x86, ioapic: Early enable ioapic for timer irq ... Fixed up semantic conflict of new clocksources due to commit 17622339af25 ("clocksource: add argument to resume callback").
2010-03-03Merge branch 'x86-bootmem-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-bootmem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits) early_res: Need to save the allocation name in drop_range_partial() sparsemem: Fix compilation on PowerPC early_res: Add free_early_partial() x86: Fix non-bootmem compilation on PowerPC core: Move early_res from arch/x86 to kernel/ x86: Add find_fw_memmap_area Move round_up/down to kernel.h x86: Make 32bit support NO_BOOTMEM early_res: Enhance check_and_double_early_res x86: Move back find_e820_area to e820.c x86: Add find_early_area_size x86: Separate early_res related code from e820.c x86: Move bios page reserve early to head32/64.c sparsemem: Put mem map for one node together. sparsemem: Put usemap for one node together x86: Make 64 bit use early_res instead of bootmem before slab x86: Only call dma32_reserve_bootmem 64bit !CONFIG_NUMA x86: Make early_node_mem get mem > 4 GB if possible x86: Dynamically increase early_res array size x86: Introduce max_early_res and early_res_count ...
2010-02-28Merge branch 'x86-io-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-io-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Merge io.h x86: Simplify flush_write_buffers() x86: Clean up mem*io functions. x86-64: Use BUILDIO in io_64.h x86-64: Reorganize io_64.h x86-32: Remove _local variants of in/out from io_32.h x86-32: Move XQUAD definitions to numaq.h
2010-02-26x86, olpc: Use pci subarch init for OLPCThomas Gleixner
Replace the #ifdef'ed OLPC-specific init functions by a conditional x86_init function. If the function returns 0 we leave pci_arch_init, otherwise we continue. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Andres Salomon <dilinger@collabora.co.uk> LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318CE89@orsmsx508.amr.corp.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-25x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=nYinghai Lu
If we don't have any Moorestown CPU support compiled in, we don't need the Moorestown PCI support either. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4B858E89.7040807@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-25x86/PCI: Prevent mmconfig memory corruptionThomas Gleixner
commit ff097ddd4 (x86/PCI: MMCONFIG: manage pci_mmcfg_region as a list, not a table) introduced a nasty memory corruption when pci_mmcfg_list is empty. pci_mmcfg_check_end_bus_number() dereferences pci_mmcfg_list.prev even when the list is empty. The following write hits some variable near to pci_mmcfg_list. Further down a similar problem exists, where cfg->list.next is dereferenced unconditionally and a comparison with some variable near to pci_mmcfg_list happens. Add a check for the last element into the for_each_entry() loop and remove all the other crappy logic which is just a leftover of the old array based code which was replaced by the list conversion. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-24x86, pci: Add sanity check for PCI fixed bar probingJacob Pan
While probing for the PCI fixed BAR capability in the extended PCI configuration space we need to make sure raw_pci_ext_ops is actually initialized. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F0755A321E8F7@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24x86/PCI: Moorestown PCI supportJesse Barnes
The Moorestown platform only has a few devices that actually support PCI config cycles. The rest of the devices use an in-RAM MCFG space for the purposes of device enumeration and initialization. There are a few uglies in the fake support, like BAR sizes that aren't a power of two, sizing detection, and writes to the real devices, but other than that it's pretty straightforward. Another way to think of this is not really as PCI at all, but just a table in RAM describing which devices are present, their capabilities and their offsets in MMIO space. This could have been done with a special new firmware table on this platform, but given that we do have some real PCI devices too, simply describing things in an MCFG type space was pretty simple. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D08@orsmsx508.amr.corp.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-23x86/PCI: use host bridge _CRS info by default on 2008 and newer machinesBjorn Helgaas
The main benefit of using ACPI host bridge window information is that we can do better resource allocation in systems with multiple host bridges, e.g., http://bugzilla.kernel.org/show_bug.cgi?id=14183 Sometimes we need _CRS information even if we only have one host bridge, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/341681 Most of these systems are relatively new, so this patch turns on "pci=use_crs" only on machines with a BIOS date of 2008 or newer. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-23PCI: augment bus resource table with a listBjorn Helgaas
Previously we used a table of size PCI_BUS_NUM_RESOURCES (16) for resources forwarded to a bus by its upstream bridge. We've increased this size several times when the table overflowed. But there's no good limit on the number of resources because host bridges and subtractive decode bridges can forward any number of ranges to their secondary buses. This patch reduces the table to only PCI_BRIDGE_RESOURCE_NUM (4) entries, which corresponds to the number of windows a PCI-to-PCI (3) or CardBus (4) bridge can positively decode. Any additional resources, e.g., PCI host bridge windows or subtractively-decoded regions, are kept in a list. I'd prefer a single list rather than this split table/list approach, but that requires simultaneous changes to every architecture. This approach only requires immediate changes where we set up (a) host bridges with more than four windows and (b) subtractive-decode P2P bridges, and we can incrementally change other architectures to use the list. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-23resource/PCI: mark struct resource as constDominik Brodowski
Now that we return the new resource start position, there is no need to update "struct resource" inside the align function. Therefore, mark the struct resource as const. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-23resource/PCI: align functions now return start of resourceDominik Brodowski
As suggested by Linus, align functions should return the start of a resource, not void. An update of "res->start" is no longer necessary. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-23x86/PCI: irq and pci_ids patch for Intel Cougar Point DeviceIDsSeth Heasley
This patch adds the Intel Cougar Point (PCH) LPC and SMBus Controller DeviceIDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-20x86: Add pcibios_fixup_irqs to x86_initThomas Gleixner
Platforms like Moorestown want to override the pcibios_fixup_irqs default function. Add it to x86_init.pci. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D00@orsmsx508.amr.corp.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-20x86: Add pci_init_irq to x86_initThomas Gleixner
Moorestown wants to reuse pcibios_init_irq but needs to provide its own implementation of pci_enable_irq. After we distangled the init we can move the init_irq call to x86_init and remove the pci_enable_irq != NULL check in pcibios_init_irq. pci_enable_irq is compile time initialized to pirq_enable_irq and the special cases which override it (visws and acpi) set the x86_init function pointer to noop. That allows MSRT to override pci_enable_irq and otherwise run pcibios_init_irq unmodified. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFF@orsmsx508.amr.corp.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-20x86: Move pci init function to x86_initThomas Gleixner
The PCI initialization in pci_subsys_init() is a mess. pci_numaq_init, pci_acpi_init, pci_visws_init and pci_legacy_init are called and each implementation checks and eventually modifies the global variable pcibios_scanned. x86_init functions allow us to do this more elegant. The pci.init function pointer is preset to pci_legacy_init. numaq, acpi and visws can modify the pointer in their early setup functions. The functions return 0 when they did the full initialization including bus scan. A non zero return value indicates that pci_legacy_init needs to be called either because the selected function failed or wants the generic bus scan in pci_legacy_init to happen (e.g. visws). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFE@orsmsx508.amr.corp.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-11x86: Change range end to start+sizeYinghai Lu
So make interface more consistent with early_res. Later we can share some code with early_res. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-10-git-send-email-yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-11x86/pci: Enable pci root res read out for 32bit tooYinghai Lu
Should be good for 32bit too. -v3: cast res->start -v4: according to Linus, to use %pR instead of cast Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-9-git-send-email-yinghai@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-11x86/pci: Add cap_resource()Yinghai Lu
Prepare for 32bit pci root bus -v2: hpa said we should compare with (resource_size_t)~0 -v3: according to Linus to use MAX_RESOURCE instead. also need need to put related patches together -v4: according to Andrew, use min in cap_resource() Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-8-git-send-email-yinghai@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-11x86/pci: Use u64 instead of size_t in amd_bus.cYinghai Lu
Prepare to enable it for 32bit. -v2: remove not needed cast Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-7-git-send-email-yinghai@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-11x86/pci: AMD one chain system to use pci read out resYinghai Lu
Found MSI amd k8 based laptops is hiding [0x70000000, 0x80000000) RAM from e820. enable amd one chain even for all. -v2: use bool for found, according to Andrew Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-6-git-send-email-yinghai@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-11x86/pci: Use resource_size_t in update_resYinghai Lu
Prepare to enable 32bit intel and amd bus. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-5-git-send-email-yinghai@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-11x86: Move range related operation to one fileYinghai Lu
We have almost the same code for mtrr cleanup and amd_bus checkup, and this code will also be used in replacing bootmem with early_res, so try to move them together and reuse it from different parts. Also rename update_range to subtract_range as that is what the function is actually doing. -v2: update comments as Christoph requested Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-4-git-send-email-yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-05x86-32: Move XQUAD definitions to numaq.hBrian Gerst
The XQUAD stuff is part of the NUMAQ architecture, so move it there. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1265380629-3212-2-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-28x86/PCI: remove IOH range fetchingJeff Garrett
Turned out to cause trouble on single IOH machines, and is superceded by _CRS on multi-IOH machines with production BIOSes. Signed-off-by: Jeff Garrett <jeff@jgarrett.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-08Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip: x86, irq: Check move_in_progress before freeing the vector mapping x86: copy_from_user() should not return -EFAULT Revert "x86: Side-step lguest problem by only building cmpxchg8b_emu for pre-Pentium" x86/pci: Intel ioh bus num reg accessing fix x86: Fix size for ex trampoline with 32bit
2010-01-04x86/pci: Intel ioh bus num reg accessing fixYinghai Lu
It is above 0x100 (PCI-Express extended register space), so if mmconf is not enable, we can't access it. [ hpa: changed the bound from 0x200 to 0x120, which is the tight bound. ] Reported-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1261525263-13763-3-git-send-email-yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-16PCI: fix section mismatch on update_res()Jiri Slaby
Remark update_res from __init to __devinit as it is called also from __devinit functions. This patch removes the following warning message: WARNING: vmlinux.o(.devinit.text+0x774a): Section mismatch in reference from the function pci_root_bus_res() to the function .init.text:update_res() The function __devinit pci_root_bus_res() references a function __init update_res(). If update_res is only used by pci_root_bus_res then annotate update_res with a matching annotation. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Aristeu Sergio <arozansk@redhat.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: linux-pci@vger.kernel.org Cc: x86@kernel.org Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-05x86/PCI: claim SR-IOV BARs in pcibios_allocate_resourceYinghai Lu
This allows us to use the BIOS SR-IOV allocations rather than assigning our own later on. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24x86/PCI: MMCONFIG: add lookup functionBjorn Helgaas
This patch factors out the search for an MMCONFIG region, which was previously implemented in both mmconfig_32 and mmconfig_64. No functional change. Reviewed-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24x86/PCI: MMCONFIG: clean up printksBjorn Helgaas
No functional change; just tidy up printks and make them more consistent with the rest of PCI. Reviewed-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24x86/PCI: MMCONFIG: add pci_mmconfig_remove() to remove MMCONFIG regionBjorn Helgaas
This is only used internally now, but eventually will be used in the hot-remove path to remove the MMCONFIG region associated with a host bridge. Reviewed-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24x86/PCI: MMCONFIG: manage pci_mmcfg_region as a list, not a tableBjorn Helgaas
This changes pci_mmcfg_region from a table to a list, to make it easier to add and remove MMCONFIG regions for PCI host bridge hotplug. Reviewed-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24x86/PCI: MMCONFIG: remove typeof so we can use a listBjorn Helgaas
This replaces "typeof(pci_mmcfg_config[0])" with the actual type because I plan to convert pci_mmcfg_config to a list, and then "pci_mmcfg_config[0]" won't mean anything. Reviewed-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v0.10.2 at 2024-11-07 16:01:54 (GMT)