summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-07-07dmaengine: imx-sdma: pass sdma firmware name via platform dataShawn Guo
It is not good to have cpu_name and to_version encoded into sdma firmware name as variables. For example, there are three TOs of imx51 soc, the sdma script never changes since TO1, which means all three TOs of imx51 uses TO1 version of sdma script. But we have to prepare three identical firmwares, sdma-imx51-to1.bin sdma-imx51-to2.bin and sdma-imx51-to3.bin, to have the kernel capable of running on all three TOs. The patch removes cpu_name and to_version from sdma platform data, and instead uses fw_name to pass the firmware name, so that we can pass the TO version where it's relevant and skip it where only one firmware exists. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxc: clean up imx-dma device registrationShawn Guo
The patch follows the implementation of gpio-mxc device registration to break the concentrated imx-dma device registration into soc specific setup function. Then we can avoid the churn of "#ifdef" and the cpu_is_mx checking on such a long list, which makes no sense, considering more soc supports need to be added and we need to support single image for multiple socs in the long run. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM:mach-mx5/mx53_ard: Add I2C2 and I2C3 supportAndre Silva
Signed-off-by: Andre Silva <andre.silva@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM:mx53: Add I2C3 supportAndre Silva
Signed-off-by: Andre Silva <andre.silva@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mach-imx/mx27_3ds: Add touchscreen supportFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mach-imx/mx27_3ds: Add LCD supportFabio Estevam
On mx27_3ds board there is a l4f00242t03 LCD that is controlled via CSPI1. Add support for CSPI1 and LCD. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx51: Add support for low power suspend on MX51Dinh Nguyen
Adds initial low power suspend functionality to MX51. Supports "mem" and "standby" modes. Tested on mx51-babbage. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: imx2: Fix GPIO iosizeFabio Estevam
On MX1, MX21 and MX27 each GPIO port has an address space of 256 bytes. Fix the iosize for these platforms. Tested on a mx27_3ds board that can boot fine after this change. Cc: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx53: Add SDMA support for MX53Fabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx53: Add SDMA clockFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM:mach-mx5/mx53_ard: Add Watchdog timer supportAndre Silva
Signed-off-by: Andre Silva <andre.silva@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM:mach-mx5/mx53_ard: Add ESDHC supportAndre Silva
Signed-off-by: Andre Silva <andre.silva@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM:mach-mx5/board-mx51_babbage: Add CD and WP GPIOsAndre Silva
Signed-off-by: Andre Silva <andre.silva@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM:mach-mx5/board-mx53_loco: Add CD and WP GPIOsAndre Silva
Signed-off-by: Andre Silva <andre.silva@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mach-mx5/mx53_ard: Add support for i.MX53 ARD boardAndre Silva
Signed-off-by: Andre Silva <andre.silva@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxc: convert tzic to use generic irq chipShawn Guo
The patch converts mxc tzic interrupt controller to use generic irq chip. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxs/mx28evk: add leds-gpio device for heartbeatShawn Guo
It adds LED2 on mx28evk board as heartbeat trigger for diagnostic purpose. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx5/mx53_evk: Add support for LEDFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx5/mx53_loco: Add support for LEDFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxs_defconfig: Add mx23evk and mx28evk buildShawn Guo
The patch adds following configurations to enable build of mx23evk and mx28evk in defconfig. CONFIG_MACH_MX23EVK CONFIG_MACH_MX28EVK Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07Merge remote-tracking branch 'grant/gpio/next-mx' into devel-featuresSascha Hauer
Conflicts: arch/arm/mach-imx/mach-mx31_3ds.c arch/arm/mach-imx/mach-scb9328.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX debug macro: use CONFIG_SOC_* instead of CONFIG_ARCH_*Sascha Hauer
CONFIG_ARCH_* are deprecated, so remove one user. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mach-imx/mx27_3ds: Do not annotate the chip select as internalFabio Estevam
On the i.MX SPI driver the chipselect pins can be of the following types: - internal: when the chipselect pin is used as a dedicated CS pin of the CSPI controller - GPIO: a generic GPIO can be used as a chipselect funtion On the mx27_3ds the SPI2 chip select is a GPIO, so don't annotate 'internal' in the chip select definition. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mach-imx/mx27_3ds: Use the standard gpio_to_irq functionFabio Estevam
Use the standard gpio_to_irq function instead of a dedicated IRQ_GPIOx macro. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mach-imx/scb9328: Make the UART gpio setup simplerFabio Estevam
Place the UART gpio initialization inside the scb9328_init function as it is done on other i.MX boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07plat-mxc/pwm.c: use resource_size()H Hartley Sweeten
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: imx/mach-apf9328: Simplify UART0 registrationFabio Estevam
As no flag is passed into UART0 platform data, pass NULL argument when registering UART0. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX: get rid of wrong MXC_INTERNAL_IRQ usageSascha Hauer
There are several occurences where MXC_INTERNAL_IRQ is assumed to be the start of the gpio interrupts. It was never meant this way. Replace these with gpio_to_irq. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-07-07ARM i.MX avic: do not depend on MXC_INTERNAL_IRQSSascha Hauer
This becomes meaningless in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX tzic: do not depend on MXC_INTERNAL_IRQSSascha Hauer
This becomes meaningless in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX mxc.h: use CONFIG_SOC_* instead of CONFIG_ARCH_*Sascha Hauer
CONFIG_ARCH_* are deprecated, so remove one user. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX: dmav1: kill SoC ifdefsSascha Hauer
since we now can include all soc specific headers at once we do not need the ifdeffery anymore. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX: remove SoC defines around header includesSascha Hauer
All soc specific header have proper namespace now and thus can be included at once. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX: define CLOCK_TICK_RATE to bogus valueSascha Hauer
We have a clocksource which renders CLOCK_TICK_RATE useless. Define it to a bogus value to get rid of some ifdeffery. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX: fix last user of iomux.h and remove itSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxs/tx28: convert to new leds-gpio registration helperUwe Kleine-König
This allows to move the led definition to .init.rodata. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx5: convert to new leds-gpio registration helperUwe Kleine-König
This gets rid of per machine struct platform_device definitions and allows to move the platform data and led definition to .init.rodata. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: imx: convert to new leds-gpio registration helperUwe Kleine-König
This gets rid of per machine struct platform_device definitions and allows to move the platform data and led definition to .init.rodata. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx5/mx51_babbage: Use gpio_request_array for USBH1 pinsFabio Estevam
Instead of using gpio_request followed by gpio_direction_output use gpio_request_array when requesting multiple pins. Also fixed the location of the delay for the reset and make the BABBAGE_USB_PHY_RESET to toggle. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx5/mx51_babbage: Move GPIO initialization for USB PHY Reset line to ↵Fabio Estevam
common place The USB PHY Reset GPIO can be configured in the same place as the other GPIOs. While at it rename the pin as BABBAGE_USB_PHY_RESET to make clearer its purpose. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: i.MX53: Fix IOMUX type o'sTroy Kisky
", o" was used for ", 0" ", 17" was used for ", 7 | 0x10" Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07mach-mx5: fix the I2C clock parentsLothar Waßmann
The clock from which the I2C timing is derived is the ipg_perclk not ipg_clk. I2C bus frequency was lower by a factor of ~8 due to the clock divider calculation being based on 66.5MHz IPG clock while the bus actually uses 8MHz ipg_perclk. Kernel version: 3.0.0-rc2 branch 'imx-for-next' of git://git.pengutronix.de/git/imx/linux-2.6 Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxs/tx28: according to the TX28's datasheet D4-D7 are not used for MMC0Uwe Kleine-König
The pins are actually used (not in mainline yet): D4 -> SSP2_D0 D5 -> GPIO D6 -> GPIO D7 -> GPIO for owire so their pinmapping for SSP0 is wrong. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX23/28: platform-mxsfb: Add missing include of linux/dma-mapping.hAxel Lin
Fix below build error: CC arch/arm/mach-mxs/devices/platform-mxsfb.o arch/arm/mach-mxs/devices/platform-mxsfb.c: In function 'mx23_add_mxsfb': arch/arm/mach-mxs/devices/platform-mxsfb.c:27: error: implicit declaration of function 'DMA_BIT_MASK' make[2]: *** [arch/arm/mach-mxs/devices/platform-mxsfb.o] Error 1 make[1]: *** [arch/arm/mach-mxs/devices] Error 2 make: *** [arch/arm/mach-mxs] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx53: Fix some interrupts marked as reserved.Fabio Estevam
Mark the actual interrupt source for some interrupts currently marked as reserved. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07MXC: iomux-v3: correct NO_PAD_CTRL definitionTroy Kisky
iomux-v3.c uses NO_PAD_CTRL as a 32 bit value so it should not be shifted left by MUX_PAD_CTRL_SHIFT(41) Previously, anything requesting NO_PAD_CTRL would get their pad control register set to 0. Since it is a pad control mask, place it with the other mask values. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mx51: Fix the address space length for SSIFabio Estevam
On MX51 the address space length for SSI is 16KB. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxc: imx-dma on imx25 has no other TO version but TO1Shawn Guo
The imx25 sdma script only gets TO1 version, so there is no need to encode "to1" in the variable name. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxc: change imx-dma default to_version to 1Shawn Guo
The value 0 is not a valid TO version number. With the current code, imx-sdma driver will try to load firmware sdma-imx25-to0.bin, which is obviously not a good name. Instead, sdma-imx25-to1.bin makes much more sense. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM: mxc: sdma on imx25 is a V2 blockShawn Guo
The sdma on soc imx25 is not a V1 but V2 block. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v0.10.2 at 2024-11-16 08:37:42 (GMT)