summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2012-06-24Fix typo in printed messagesAnatol Pomozov
Coult -> Could Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-24Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Avi Kivity: "Fixing a scheduling-while-atomic bug in the ppc code, and a bug which allowed pci bridges to be assigned to guests." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Drop locks around call to kvmppc_pin_guest_page KVM: Fix PCI header check on device assignment
2012-06-24Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Nothing very controversial in here. Most of the fixes are for OMAP this time around, with some orion/kirkwood and a tegra patch mixed in." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: Orion: Fix Virtual/Physical mixup with watchdog ARM: Kirkwood: clk_register_gate_fn: add fn assignment ARM: Orion5x - Restore parts of io.h, with rework ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled ARM: OMAP2+: mux: fix sparse warning ARM: OMAP2+: CM: increase the module disable timeout ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks ARM: OMAP4: hwmod data: fix 32k sync timer idle modes ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby ARM: OMAP: Fix Beagleboard DVI reset gpio arm/dts: OMAP2: Fix interrupt controller binding ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0 ARM: OMAP2+: Fix MUSB ifdefs for platform init code ARM: tegra: make tegra_cpu_reset_handler_enable() __init ARM: OMAP: PM: Lock clocks list while generating summary ARM: iconnect: Remove include of removed linux/spi/orion_spi.h
2012-06-23ARM: Orion: Fix Virtual/Physical mixup with watchdogAndrew Lunn
The orion watchdog is expecting to be passed the physcial address of the hardware, and will ioremap() it to give a virtual address it will use as the base address for the hardware. However, when creating the platform resource record, a virtual address was being used. Add the necassary #define's so we can pass the physical address as expected. Tested on Kirkwood and Orion5x. Cc: stable <stable@vger.kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-23ARM: Kirkwood: clk_register_gate_fn: add fn assignmentMarc Kleine-Budde
In commit: 98d9986 ARM: Kirkwood: Replace clock gating the kirkwood clock gating has been reworked. A custom variant of clock gating, that calls a custom function before gating the clock off, has been introduced. However in clk_register_gate_fn() this custom function "fn" is never assigned. This patch adds the missing fn assignment. Cc: stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-23ARM: Orion5x - Restore parts of io.h, with reworkAndrew Lunn
Commit 4d5fc58dbe34b78157c05b319669bb3e064ba8bd (ARM: remove bunch of now unused mach/io.h files) removed the orion5x io.h. Unfortunately, this is still needed for the definition of IO_SPACE_LIMIT which overrides the default 64K. All Orion based systems have 1Mbyte of IO space per PCI[e] bus, and try to request_resource() this size. Orion5x has two such PCI buses. It is likely that the original, removed version, was broken. This version might be less broken. However, it has not been tested on hardware with a PCI card, let alone hardware with a PCI card with IO capabilities. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-23Merge tag 'omap-fixes-a-for-3.5rc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes From Paul Walmsley (as per Tony Lindgren's request): "Some uncontroversial OMAP clock, hwmod, and compiler warning fixes for 3.5-rc" * tag 'omap-fixes-a-for-3.5rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled ARM: OMAP2+: mux: fix sparse warning ARM: OMAP2+: CM: increase the module disable timeout ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks ARM: OMAP4: hwmod data: fix 32k sync timer idle modes ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby ARM: OMAP: PM: Lock clocks list while generating summary
2012-06-23Merge tag 'omap-fixes-for-v3.5-rc3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: "Here are a few fixes with the biggest one being fix for Beagle DVI reset. All of them are regression fixes, except for the missing omap2 interrupt controller binding that somehow got missed earlier." * tag 'omap-fixes-for-v3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: Fix Beagleboard DVI reset gpio arm/dts: OMAP2: Fix interrupt controller binding ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0 ARM: OMAP2+: Fix MUSB ifdefs for platform init code
2012-06-22ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabledRicardo Neri
As per the OMAP4 documentation, audio over HDMI must be transmitted in no-idle mode. This patch adds the HWMOD_SWSUP_SIDLE so that omap_hwmod uses no-idle/force-idle settings instead of smart-idle mode. This is required as the DSS interface clock is used as functional clock for the HDMI wrapper audio FIFO. If no-idle mode is not used, audio could be choppy, have bad quality or not be audible at all. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> [b-cousson@ti.com: Update the subject and align the .flags location with the script template] Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-06-22ARM: OMAP2+: mux: fix sparse warningPaul Walmsley
Commit bbd707acee279a61177a604822db92e8164d00db ("ARM: omap2: use machine specific hook for late init") resulted in the addition of this sparse warning: arch/arm/mach-omap2/mux.c:791:12: warning: symbol 'omap_mux_late_init' was not declared. Should it be static? Fix by including the header file containing the prototype. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Tony Lindgren <tony@atomide.com>
2012-06-22ARM: OMAP2+: CM: increase the module disable timeoutPaul Walmsley
Increase the timeout for disabling an IP block to five milliseconds. This is to handle the usb_host_fs idle latency, which takes almost four milliseconds after a host controller reset. This is the second of two patches needed to resolve the following boot warning: omap_hwmod: usb_host_fs: _wait_target_disable failed Thanks to Sergei Shtylyov <sshtylyov@mvista.com> for finding an unrelated hunk in a previous version of this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Tero Kristo <t-kristo@ti.com>
2012-06-22ARM: OMAP4: clock data: add clockdomains for clocks used as main clocksPaul Walmsley
Until the OMAP4 code is converted to disable the use of the clock framework-based clockdomain enable/disable sequence, any clock used as a hwmod main_clk must have a clockdomain associated with it. This patch populates some clock structure clockdomain names to resolve the following warnings during kernel init: omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck. omap_hwmod: trace_clk_div_ck: missing clockdomain for trace_clk_div_ck. omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck. omap_hwmod: ddrphy_ck: missing clockdomain for ddrphy_ck. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Benoît Cousson <b-cousson@ti.com>
2012-06-22ARM: OMAP4: hwmod data: fix 32k sync timer idle modesPaul Walmsley
The 32k sync timer IP block target idle modes in the hwmod data are incorrect. The IP block does not support any smart-idle modes. Update the data to reflect the correct modes. This problem was initially identified and a diff fragment posted to the lists by Benoît Cousson <b-cousson@ti.com>. A patch description bug in the first version was also identified by Benoît. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Tero Kristo <t-kristo@ti.com>
2012-06-22ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-StandbyDjamil Elaidi
If an IP is configured in Smart-Standby-Wakeup, when disabling wakeup feature the IP will not go back to Smart-Standby, but will remain in Smart-Standby-Wakeup. Signed-off-by: Djamil Elaidi <d-elaidi@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-06-20Merge tag 'driver-core-3.5-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and printk fixes from Greg Kroah-Hartman: "Here are some fixes for 3.5-rc4 that resolve the kmsg problems that people have reported showing up after the printk and kmsg changes went into 3.5-rc1. There are also a smattering of other tiny fixes for the extcon and hyper-v drivers that people have reported. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: extcon: max8997: Add missing kfree for info->edev in max8997_muic_remove() extcon: Set platform drvdata in gpio_extcon_probe() and fix irq leak extcon: Fix wrong index in max8997_extcon_cable[] kmsg - kmsg_dump() fix CONFIG_PRINTK=n compilation printk: return -EINVAL if the message len is bigger than the buf size printk: use mutex lock to stop syslog_seq from going wild kmsg - kmsg_dump() use iterator to receive log buffer content vme: change maintainer e-mail address Extcon: Don't try to create duplicate link names driver core: fixup reversed deferred probe order printk: Fix alignment of buf causing crash on ARM EABI Tools: hv: verify origin of netlink connector message
2012-06-20Merge tag 'tty-3.5-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg Kroah-Hartman: "Here are 3 patches resolving a boot regression (the mop500 fix), a build warning fix, and a kernel-doc fix. All tiny, but should go into the final 3.5 release. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial/amba-pl011: move custom pin control to driver serial: fix serial_txx9.c build warning/typo serial: fix kernel-doc warnings in 8250.c
2012-06-20Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
* emailed from Andrew Morton <akpm@linux-foundation.org>: (21 patches) mm/memblock: fix overlapping allocation when doubling reserved array c/r: prctl: Move PR_GET_TID_ADDRESS to a proper place pidns: find_new_reaper() can no longer switch to init_pid_ns.child_reaper pidns: guarantee that the pidns init will be the last pidns process reaped fault-inject: avoid call to random32() if fault injection is disabled Viresh has moved get_maintainer: Fix --help warning mm/memory.c: fix kernel-doc warnings mm: fix kernel-doc warnings mm: correctly synchronize rss-counters at exit/exec mm, thp: print useful information when mmap_sem is unlocked in zap_pmd_range h8300: use the declarations provided by <asm/sections.h> h8300: fix use of extinct _sbss and _ebss xtensa: use the declarations provided by <asm/sections.h> xtensa: use "test -e" instead of bashism "test -a" xtensa: replace xtensa-specific _f{data,text} by _s{data,text} memcg: fix use_hierarchy css_is_ancestor oops regression mm, oom: fix and cleanup oom score calculations nilfs2: ensure proper cache clearing for gc-inodes thp: avoid atomic64_read in pmd_read_atomic for 32bit PAE ...
2012-06-20Viresh has movedViresh Kumar
viresh.kumar@st.com email-id doesn't exist anymore as I have left the company. Replace ST's id with viresh.linux@gmail.com. It also updates .mailmap file to fix address for 'git shortlog' Signed-off-by: Viresh Kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20h8300: use the declarations provided by <asm/sections.h>Geert Uytterhoeven
Cleanups: - Include <asm/sections.h>, - Remove the (different) extern declarations, - Remove the no longer needed address-of ('&') operators, - Remove the superfluous casts, use proper printk formatting instead. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20h8300: fix use of extinct _sbss and _ebssGeert Uytterhoeven
Nowadays it should use __bss_start and __bss_stop Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20xtensa: use the declarations provided by <asm/sections.h>Geert Uytterhoeven
Cleanups: - Include <asm/sections.h>, - Remove the (different) extern declarations, - Remove the no longer needed address-of ('&') operators, - Use %p to format pointer differences. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20xtensa: use "test -e" instead of bashism "test -a"Geert Uytterhoeven
On Ubuntu, /bin/sh is a symlink to dash, which does not support "test -a". This causes messages like test: 1: -a: unexpected operator test: 1: -a: unexpected operator and link failures like (.init.text+0x132): undefined reference to `platform_init' due to the appropriate platform code not being compiled. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20xtensa: replace xtensa-specific _f{data,text} by _s{data,text}Geert Uytterhoeven
commit a2d063ac216c161 ("extable, core_kernel_data(): Make sure all archs define _sdata") missed xtensa. Xtensa does have a start of data marker, but calls it _fdata, causing kernel/built-in.o:(.text+0x964): undefined reference to `_sdata' _stext was already defined, but it was duplicated by _fdata. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20thp: avoid atomic64_read in pmd_read_atomic for 32bit PAEAndrea Arcangeli
In the x86 32bit PAE CONFIG_TRANSPARENT_HUGEPAGE=y case while holding the mmap_sem for reading, cmpxchg8b cannot be used to read pmd contents under Xen. So instead of dealing only with "consistent" pmdvals in pmd_none_or_trans_huge_or_clear_bad() (which would be conceptually simpler) we let pmd_none_or_trans_huge_or_clear_bad() deal with pmdvals where the low 32bit and high 32bit could be inconsistent (to avoid having to use cmpxchg8b). The only guarantee we get from pmd_read_atomic is that if the low part of the pmd was found null, the high part will be null too (so the pmd will be considered unstable). And if the low part of the pmd is found "stable" later, then it means the whole pmd was read atomically (because after a pmd is stable, neither MADV_DONTNEED nor page faults can alter it anymore, and we read the high part after the low part). In the 32bit PAE x86 case, it is enough to read the low part of the pmdval atomically to declare the pmd as "stable" and that's true for THP and no THP, furthermore in the THP case we also have a barrier() that will prevent any inconsistent pmdvals to be cached by a later re-read of the *pmd. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Tested-by: Andrew Jones <drjones@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "This includes three MMCI changes - one to fix up the wrong version of the DT support patch which was merged, and two to make deferred probing work. It also includes a fix to the OMAP SPI driver which is causing a boot time warning. The remainder are very minor ARM fixes." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: SPI: fix over-eager devm_xxx() conversion ARM: 7427/1: mmc: mmci: Defer probe() in case of yet uninitialized GPIOs ARM: 7426/1: mmc: mmci: Remove wrong error handling of gpio 0 ARM: 7425/1: extable: ensure fixup entries are 4-byte aligned ARM: 7421/1: bpf_jit: BPF_S_ANC_ALU_XOR_X support ARM: 7423/1: kprobes: run t32_simulate_ldr_literal() without insn slot ARM: 7422/1: mmc: mmci: Allocate platform memory during Device Tree boot
2012-06-20ARM: OMAP: Fix Beagleboard DVI reset gpioRuss Dill
Commit e813a55eb9c9bc6c8039fb16332cf43402125b30 ("OMAP: board-files: remove custom PD GPIO handling for DVI output") moved TFP410 chip's powerdown-gpio handling from the board files to the tfp410 driver. One gpio_request_one(powerdown-gpio, ...) was mistakenly left unremoved in the Beagle board file. This causes the tfp410 driver to fail to request the gpio on Beagle, causing the driver to fail and thus the DVI output doesn't work. This patch removes several boot errors from board-omap3beagle.c: - gpio_request: gpio--22 (DVI reset) status -22 - Unable to get DVI reset GPIO There is a combination of leftover code and revision confusion. Additionally, xM support is currently a hack. For original Beagleboard this removes the double initialization of GPIO 170, properly configures it as an output, and wraps the initialization in an if block so that xM does not attempt to request it. For Beagleboard xM it removes reference to GPIO 129 which was part of rev A1 and A2 designs, but never functioned. It then properly assigns beagle_dvi_device.reset_gpio in beagle_twl_gpio_setup and removes the hack of initializing it high. Additionally, it uses gpio_set_value_cansleep since this GPIO is connected through i2c. Unfortunately, there is no way to tell the difference between xM A2 and A3. However, GPIO 129 does not function on rev A1 and A2, and the TWL GPIO used on A3 and beyond is not used on rev A1 and A2, there are no problems created by this fix. Tested on Beagleboard-xM Rev C1 and Beagleboard Rev B4. Signed-off-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-20arm/dts: OMAP2: Fix interrupt controller bindingJon Hunter
When booting with device-tree on an OMAP2420H4, the kernel is hanging when initialising the interrupts and following kernel dumps is seen ... [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/arm/mach-omap2/irq.c:271 omap_intc_of_init+0x50/0xb4() [ 0.000000] unable to get intc registers [ 0.000000] Modules linked in: [ 0.000000] [<c001befc>] (unwind_backtrace+0x0/0xf4) from [<c0040c34>] (warn_slowpath_common+0x4c/0x64) [ 0.000000] [<c0040c34>] (warn_slowpath_common+0x4c/0x64) from [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40) [ 0.000000] [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40) from [<c066b8a4>] (omap_intc_of_init+0x50/0xb4) [ 0.000000] [<c066b8a4>] (omap_intc_of_init+0x50/0xb4) from [<c0688b70>] (of_irq_init+0x144/0x288) [ 0.000000] [<c0688b70>] (of_irq_init+0x144/0x288) from [<c0663294>] (init_IRQ+0x14/0x1c) [ 0.000000] [<c0663294>] (init_IRQ+0x14/0x1c) from [<c06607fc>] (start_kernel+0x198/0x304) [ 0.000000] [<c06607fc>] (start_kernel+0x198/0x304) from [<80008044>] (0x80008044) [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.000000] of_irq_init: children remain, but no parents The OMAP2 interrupt controller binding is missing the number of interrupts and interrupt controller register address. Adding these fixes the problem. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-20ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0Tony Lindgren
Here's one more gpio_to_irq conversion that we missed earlier. Tested with n800 in gadget mode using USB_ETH. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-20ARM: OMAP2+: Fix MUSB ifdefs for platform init codeTony Lindgren
Commit 62285963 (usb: musb: drop a gigantic amount of ifdeferry) got rid of a bunch of ifdefs in the MUSB code. Looks like the platform init code is still using these dropped defines though, which in many cases results the board defaulting always to host mode. Currently the situation is that USB_MUSB_HDRC is the main Kconfig option with additional USB_GADGET_MUSB_HDRC so only these two should be used to select between host and OTG mode. Fix the situation for omaps. The following users should fix the platform init code in a similar way: Dropped Kconfig option Current users USB_MUSB_OTG blackfin, davinci, not in Kconfigs USB_MUSB_PERIPHERAL davinci, not in Kconfigs USB_MUSB_HOST davinci, not in Kconfigs USB_MUSB_HDRC_HCD blackfin, not in Kconfigs USB_MUSB_OTG blackfin, not in Kconfigs Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sekhar Nori <nsekhar@ti.com> Cc: linux-usb@vger.kernel.org Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-20Merge tag 'sound-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Most of changes are fairly small and driver-specific. A remaining regression fix for USB-audio sync pipe check, a fix for HD-audio power-up sequence, fixes for ASoC pxa-ssp compile issues, and bunch of ASoC codec and trivial fix patches." * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: 6fire: use NULL instead of 0 for pointer assignment ALSA: hda - Handle open while transitioning to D3. ALSA: snd-usb: make snd_usb_substream_capture_trigger static ALSA: snd-usb: fix sync pipe check ASoC: tegra+wm8903: turn of mic detect when card is removed ASoC: wm8996: Mark the CODEC as cache only when powering off on boot ASoC: wm8996: Move reset before the initial regulator disable ASoC: wm8996: Remove spurious regulator_bulk_free() ASoC: wm8904: Fix cache only management ASoC: wm8904: Fix GPIO and MICBIAS initialisation for regmap conversion ASoC: fix pxa-ssp compiling issue under mach-mmp ARM: MMP: add pxa910-ssp into ssp_id_table
2012-06-19KVM: PPC: Book3S HV: Drop locks around call to kvmppc_pin_guest_pagePaul Mackerras
At the moment we call kvmppc_pin_guest_page() in kvmppc_update_vpa() with two spinlocks held: the vcore lock and the vcpu->vpa_update_lock. This is not good, since kvmppc_pin_guest_page() calls down_read() and get_user_pages_fast(), both of which can sleep. This bug was introduced in 2e25aa5f ("KVM: PPC: Book3S HV: Make virtual processor area registration more robust"). This arranges to drop those spinlocks before calling kvmppc_pin_guest_page() and re-take them afterwards. Dropping the vcore lock in kvmppc_run_core() means we have to set the vcore_state field to VCORE_RUNNING before we drop the lock, so that other vcpus won't try to run this vcore. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-06-18ARM: tegra: make tegra_cpu_reset_handler_enable() __initStephen Warren
This solves a section mismatch warning. I hadn't noticed this before, because my compiler was inlining tegra_cpu_reset_handler_enable() inside tegra_cpu_reset_handler_init(), which is already __init, but I switched compilers and it stopped doing that. Cc: <stable@kernel.org> # v3.4 Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-17ARM: OMAP: PM: Lock clocks list while generating summaryTodd Poynor
Commit a53025724052b2b1edbc982a4a248784638f563d (OMAP: Add debugfs node to show the summary of all clocks) introduced clock summary, however, we are interested in seeing snapshot of the clock state, not in dynamically changing clock configurations as the data provided by clock summary will then be useless for debugging configuration issues. So, hold the common lock when dumping the clock summary. Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Todd Poynor <toddpoynor@google.com> [nm@ti.com: added commit message] Signed-off-by: Nishanth Menon <nm@ti.com> [paul@pwsan.com: minor edits to commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-06-17ARM: iconnect: Remove include of removed linux/spi/orion_spi.hAndrew Lunn
v3.5-rc1 fails to build when DT and iconnect is enabled because of this now none existant include file. Also remove the other two SPI include files, which are not needed with the move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-17Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A bit larger set than usual, unfortunately -- I've been sitting on them longer than I meant to so it's really more like 2 -rc pull requests in one, volume-wise. Nearly everything is fixes for fallout from the merge window, or other fixes for bugs. The one exception is the highbank L2-enablement patch, but it was contained enough that I picked it up anyway: - i.MX fixes, mostly for clock and pinctrl changes - OMAP fixes, mostly PM-related - A patch to enable L2 on highbank - A couple of fixes for PXA, Kirkwood, Versatile" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits) ARM: Kirkwood: Fix clk problems modular ethernet driver arm: versatile: fix and enable PCI I/O space ARM: highbank: Add smc calls to enable/disable the L2 ARM i.MX imx21ads: Fix overlapping static i/o mappings ARM: imx6: exit coherency when shutting down a cpu ARM: mx51: Add pinctrl_provide_dummies() ARM: mx31: Add pinctrl_provide_dummies() ARM: OMAP2+: Fix compile for CONFIG_TIDSPBRIDGE platform init code ARM: OMAP3: Fix omap3_l3_block_irq warning when CONFIG_BUG is not set ARM: OMAP: Fix MMC_OMAP build when only MMC_OMAP_HS is selected OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup ARM: mmp: fix missing cascade_irq in irq handler ARM: dts: update memory size on brownstone ARM i.MX27 Visstrim M10: fix gpio handling. ARM i.MX53: Fix PLL4 base address ARM i.MX pllv2: make round_rate accurate ARM i.MX pllv2: use standard register set unconditionally ARM: OMAP: Fix lis3lv02d accelerometer to use gpio_to_irq ARM: imx: only call l2x0_init if it's available ARM: imx: only specify i2c device type once ...
2012-06-17ARM: Kirkwood: Fix clk problems modular ethernet driverAndrew Lunn
When the ethernet driver was built as a module, it would lock the machine when loaded. At boot the ethernet clks are unused, so get turned off. Later, when the module is loaded, the probe function would access the hardware before the clock was restarted, and the machine would lock. It has also been determined that when the clk is turned off, the interface forgets its MAC address, which for most systems, is set by the boot loader. When the machine setup file creates a platform device for the interface, prepare and enable the clock for the interface. This will ensure it is not turned off. However, if the setup file only instantiates one platform device, the other will have its clk disabled, thus maybe saving a little power. Report-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-17arm: versatile: fix and enable PCI I/O spaceArnd Bergmann
With commit 4d5fc58dbe34b (ARM: remove bunch of now unused mach/io.h files), the I/O space setup was completely broken on versatile. This patch fixes that and prepares for further I/O space clean-up. I/O space handling on the versatile platform is currently broken in multiple ways. Most importantly, the ports do not get mapped into the virtual address space at all. Also, there is some amount of confusion between PCI I/O space and other statically mapped MMIO registers in the platform code: * The __io_address() macro that is used to access the platform register maps to the same __io macro that gets used for I/O space. * The IO_SPACE_LIMIT is set to a value that is much larger than the total available space. * The I/O resource of the PCI bus is set to the physical address of the mapping, which is way outside of the actual I/O space limit as well as the address range that gets decoded by traditional PCI cards. * No attempt is made to stay outside of the ISA port range that some device drivers try access. * No resource gets requested as a child of ioport_resource, but an IORESOURCE_IO type mapping gets requested as a child of iomem_resource. This patch attempts to correct all of the above. This makes it possible to use virtio-pci based virtual devices as well as actual PCI cards including those with legacy ISA port ranges like VGA. Some of the issues seem to be duplicated on other platforms. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [rob: update to 3.5-rc2 and io.h cleanup related changes] Signed-off-by: Rob Herring <rob.herring@calxeda.com> Tested-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-17Merge branch 'fixes' of git://github.com/hzhuang1/linux into fixesOlof Johansson
* 'fixes' of git://github.com/hzhuang1/linux: ARM: mmp: fix missing cascade_irq in irq handler ARM: dts: update memory size on brownstone
2012-06-17Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile update from Chris Metcalf: "This one-line bug fix unbreaks glibc robust mutexes (among other things no doubt), from code merged in during the 3.5 merge window but which we had been running internally at Tilera for almost a year." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: fix bug in get_user() for 4-byte values
2012-06-16tile: fix bug in get_user() for 4-byte valuesChris Metcalf
The definition of 32-bit values in the 64-bit tilegx architecture is that they should be sign-extended regardless of whether they are considered signed or unsigned by the compiler. Accordingly, we need to use an "ld4s" rather than "ld4u" to load and sign-extend for get_user(). This fixes glibc bug 14238 (see http://sourceware.org/bugzilla), introduced during the 3.5 merge window. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-06-16ARM: 7425/1: extable: ensure fixup entries are 4-byte alignedWill Deacon
Fixup entries in the kernel exception tables should be 4-byte aligned since we return directly to them when handling a faulting instruction in the kernel. This patch adds the missing align directives to the fixup entries. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-16Merge branch 'fixes-for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping fixes from Marek Szyprowski: "A set of minor fixes for dma-mapping code (ARM and x86) required for Contiguous Memory Allocator (CMA) patches merged in v3.5-rc1." * 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: x86: dma-mapping: fix broken allocation when dma_mask has been provided ARM: dma-mapping: fix debug messages in dmabounce code ARM: mm: fix type of the arm_dma_limit global variable ARM: dma-mapping: Add missing static storage class specifier
2012-06-16Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc Pull PowerPC fix from Paul Mackerras: "Just one commit, and a one-liner at that, but an important one; without it hard_irq_disable() does nothing on powerpc." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: Make hard_irq_disable() actually hard-disable interrupts
2012-06-16Merge tag 'stable/for-linus-3.5-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull five Xen bug-fixes from Konrad Rzeszutek Wilk: - When booting as PVHVM we would try to use PV console - but would not validate the parameters causing us to crash during restore b/c we re-use the wrong event channel. - When booting on machines with SR-IOV PCI bridge we didn't check for the bridge and tried to use it. - Under AMD machines would advertise the APERFMPERF resulting in needless amount of MSRs from the guest. - A global value (xen_released_pages) was not subtracted at bootup when pages were added back in. This resulted in the balloon worker having the wrong account of how many pages were truly released. - Fix dead-lock when xen-blkfront is run in the same domain as xen-blkback. * tag 'stable/for-linus-3.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: mark local pages as FOREIGN in the m2p_override xen/setup: filter APERFMPERF cpuid feature out xen/balloon: Subtract from xen_released_pages the count that is populated. xen/pci: Check for PCI bridge before using it. xen/events: Add WARN_ON when quick lookup found invalid type. xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness. xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFN xen/hvc: Collapse error logic.
2012-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc update from David S. Miller: "This just removes some sparc headers that were never, ever, used." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: remove two unused headers
2012-06-15Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Fix topology checks on AMD MCM CPUs x86/mm: Fix some kernel-doc warnings x86, um: Correct syscall table type attributes breaking gcc 4.8
2012-06-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: watchdog: Quiet down the boot messages perf/x86: Fix broken LBR fixup code tracing: Have tracing_off() actually turn tracing off
2012-06-15kmsg - kmsg_dump() use iterator to receive log buffer contentKay Sievers
Provide an iterator to receive the log buffer content, and convert all kmsg_dump() users to it. The structured data in the kmsg buffer now contains binary data, which should no longer be copied verbatim to the kmsg_dump() users. The iterator should provide reliable access to the buffer data, and also supports proper log line-aware chunking of data while iterating. Signed-off-by: Kay Sievers <kay@vrfy.org> Tested-by: Tony Luck <tony.luck@intel.com> Reported-by: Anton Vorontsov <anton.vorontsov@linaro.org> Tested-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15Make hard_irq_disable() actually hard-disable interruptsPaul Mackerras
At present, hard_irq_disable() does nothing on powerpc because of this code in include/linux/interrupt.h: #ifndef hard_irq_disable #define hard_irq_disable() do { } while(0) #endif So we need to make our hard_irq_disable be a macro. It was previously a macro until commit 7230c56441 ("powerpc: Rework lazy-interrupt handling") changed it to a static inline function. Cc: stable@vger.kernel.org Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> -- arch/powerpc/include/asm/hw_irq.h | 3 +++ 1 file changed, 3 insertions(+)
2012-06-14xen: mark local pages as FOREIGN in the m2p_overrideStefano Stabellini
When the frontend and the backend reside on the same domain, even if we add pages to the m2p_override, these pages will never be returned by mfn_to_pfn because the check "get_phys_to_machine(pfn) != mfn" will always fail, so the pfn of the frontend will be returned instead (resulting in a deadlock because the frontend pages are already locked). INFO: task qemu-system-i38:1085 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. qemu-system-i38 D ffff8800cfc137c0 0 1085 1 0x00000000 ffff8800c47ed898 0000000000000282 ffff8800be4596b0 00000000000137c0 ffff8800c47edfd8 ffff8800c47ec010 00000000000137c0 00000000000137c0 ffff8800c47edfd8 00000000000137c0 ffffffff82213020 ffff8800be4596b0 Call Trace: [<ffffffff81101ee0>] ? __lock_page+0x70/0x70 [<ffffffff81a0fdd9>] schedule+0x29/0x70 [<ffffffff81a0fe80>] io_schedule+0x60/0x80 [<ffffffff81101eee>] sleep_on_page+0xe/0x20 [<ffffffff81a0e1ca>] __wait_on_bit_lock+0x5a/0xc0 [<ffffffff81101ed7>] __lock_page+0x67/0x70 [<ffffffff8106f750>] ? autoremove_wake_function+0x40/0x40 [<ffffffff811867e6>] ? bio_add_page+0x36/0x40 [<ffffffff8110b692>] set_page_dirty_lock+0x52/0x60 [<ffffffff81186021>] bio_set_pages_dirty+0x51/0x70 [<ffffffff8118c6b4>] do_blockdev_direct_IO+0xb24/0xeb0 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00 [<ffffffff8118ca95>] __blockdev_direct_IO+0x55/0x60 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00 [<ffffffff811e91c8>] ext3_direct_IO+0xf8/0x390 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00 [<ffffffff81004b60>] ? xen_mc_flush+0xb0/0x1b0 [<ffffffff81104027>] generic_file_aio_read+0x737/0x780 [<ffffffff813bedeb>] ? gnttab_map_refs+0x15b/0x1e0 [<ffffffff811038f0>] ? find_get_pages+0x150/0x150 [<ffffffff8119736c>] aio_rw_vect_retry+0x7c/0x1d0 [<ffffffff811972f0>] ? lookup_ioctx+0x90/0x90 [<ffffffff81198856>] aio_run_iocb+0x66/0x1a0 [<ffffffff811998b8>] do_io_submit+0x708/0xb90 [<ffffffff81199d50>] sys_io_submit+0x10/0x20 [<ffffffff81a18d69>] system_call_fastpath+0x16/0x1b The explanation is in the comment within the code: We need to do this because the pages shared by the frontend (xen-blkfront) can be already locked (lock_page, called by do_read_cache_page); when the userspace backend tries to use them with direct_IO, mfn_to_pfn returns the pfn of the frontend, so do_blockdev_direct_IO is going to try to lock the same pages again resulting in a deadlock. A simplified call graph looks like this: pygrub QEMU ----------------------------------------------- do_read_cache_page io_submit | | lock_page ext3_direct_IO | bio_add_page | lock_page Internally the xen-blkback uses m2p_add_override to swizzle (temporarily) a 'struct page' to have a different MFN (so that it can point to another guest). It also can easily find out whether another pfn corresponding to the mfn exists in the m2p, and can set the FOREIGN bit in the p2m, making sure that mfn_to_pfn returns the pfn of the backend. This allows the backend to perform direct_IO on these pages, but as a side effect prevents the frontend from using get_user_pages_fast on them while they are being shared with the backend. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>