summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-07-11xen/pci: Retire unnecessary #ifdef CONFIG_ACPIKonrad Rzeszutek Wilk
As the code paths that are guarded by CONFIG_XEN_DOM0 already depend on CONFIG_ACPI so the extra #ifdef is not required. The earlier patch that added them in had done its job. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-11xen/pci: Move the allocation of IRQs when there are no IOAPIC's to the endKonrad Rzeszutek Wilk
.. which means we can preset of NR_IRQS_LEGACY interrupts using the 'acpi_get_override_irq' API before this loop. This means that we can get the IRQ's polarity (and trigger) from either the ACPI (or MP); or use the default values. This fixes a bug if we did not have an IOAPIC we would not been able to preset the IRQ's polarity if the MP table existed. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-11xen/pci: Squash pci_xen_initial_domain and xen_setup_pirqs together.Konrad Rzeszutek Wilk
Since they are only called once and the rest of the pci_xen_* functions follow the same pattern of setup. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-11xen/pci: Use the xen_register_pirq for HVM and initial domain usersKonrad Rzeszutek Wilk
.. to cut down on the code duplicity. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-11xen/pci: In xen_register_pirq bind the GSI to the IRQ after the hypercall.Konrad Rzeszutek Wilk
Not before .. also that code segment starts looking like the HVM one. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-11xen/pci: Provide #ifdef CONFIG_ACPI to easy code squashing.Konrad Rzeszutek Wilk
In the past we would guard those code segments to be dependent on CONFIG_XEN_DOM0 (which depends on CONFIG_ACPI) so this patch is not stricly necessary. But the next patch will merge common HVM and initial domain code and we want to make sure the CONFIG_ACPI dependency is preserved - as HVM code does not depend on CONFIG_XEN_DOM0. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-11xen/pci: Update comments and fix empty spaces.Konrad Rzeszutek Wilk
Update the out-dated comment at the beginning of the file. Also provide the copyrights of folks who have been contributing to this code lately. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-11xen/pci: Shuffle code around.Konrad Rzeszutek Wilk
The file is hard to read. Move the code around so that the contents of it follows a uniform format: - setup GSIs - PV, HVM, and initial domain case - then MSI/MSI-x setup - PV, HVM and then initial domain case. - then MSI/MSI-x teardown - same order. - lastly, the __init functions in PV, HVM, and initial domain order. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-11x86: Disable AMD_NUMA for 32bit for nowTejun Heo
Commit 2706a0bf7b ("x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit too") enabled AMD NUMA for 32bit too. Unfortunately, SPARSEMEM on 32bit had rather coarse (512MiB) addr->node mapping granularity due to lack of space in page->flags. This led to boot failure on certain AMD NUMA machines which had 128MiB alignment on nodes. Patches to properly detect this condition and reject NUMA configuration are posted[1] but deemed too pervasive for merge at this point (-rc6). Disable AMD NUMA for 32bit for now and re-enable once the detection logic is merged. [1] http://thread.gmane.org/gmane.linux.kernel/1161279/focus=1162583 Reported-by: Hans Rosenfeld <hans.rosenfeld@amd.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Conny Seidel <conny.seidel@amd.com> Link: http://lkml.kernel.org/r/20110711083432.GC943@htj.dyndns.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-11ARM: pxa/raumfeld: fix device name for codec ak4104Daniel Mack
In commit f0fba2ad (ASoC: multi-component - ASoC Multi-Component Support), the name of the ak4104 codec driver was changed without amending the platform code which uses it as well. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-11ARM: pxa/raumfeld: display initialisation fixesSven Neumann
The display requires some milliseconds between GPIO_TFT_VA_EN and GPIO_DISPLAY_ENABLE. Reorder initialisation to comply with the display spec. Also tune timings for better compliance with the spec. Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-11ARM: pxa/raumfeld: adapt to upcoming hardware changeSven Neumann
The backlight control is going to change back to PWM in the upcoming Raumfeld Controller hardware revision. Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-11ARM: pxa: fix gpio_to_chip() clash with gpiolib namespaceLinus Walleij
The PXA platform code has a static inline helper called gpio_to_chip which clashes with the gpiolib namespace if we try to expose the function with the same name from gpiolib, and it's still confusing even if we don't do that. So rename it to gpio_to_pxachip(). Reported-by: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Eric Miao <eric.miao@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-10Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6994/1: smp_twd: Fix typo in 'twd_timer_rate' printing ARM: 6987/1: l2x0: fix disabling function to avoid deadlock ARM: 6966/1: ep93xx: fix inverted RTS/DTR signals on uart1 ARM: 6980/1: mmci: use StartBitErr to detect bad connections ARM: 6979/1: mach-vt8500: add forgotten irq_data conversion ARM: move memory layout sanity checking before meminfo initialization ARM: 6990/1: MAINTAINERS: add entry for ARM PMU profiling and debugging ARM: 6989/1: perf: do not start the PMU when no events are present ARM: dmabounce: fix map_single() error return value
2011-07-09Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C2440: fix section mismatch on mini2440 ARM: S3C24XX: drop return codes in void function of dma.c ARM: S3C24XX: don't use uninitialized variable in dma.c ARM: EXYNOS4: Set appropriate I2C device variant ARM: S5PC100: Fix for compilation error spi/s3c64xx: Bug fix for SPI with different FIFO level ARM: SAMSUNG: Add tx_st_done variable ARM: EXYNOS4: Address a section mismatch w/ suspend issue. ARM: S5P: Fix bug on init of PWMTimers for HRTimer ARM: SAMSUNG: header file revised to prevent declaring duplicated ARM: EXYNOS4: fix improper gpio configuration ARM: EXYNOS4: Fix card detection for sdhci 0 and 2
2011-07-08ARM: mxc: use ARCH_NR_GPIOS to define gpio numberShawn Guo
The patch removes MXC_GPIO_IRQS and instead uses ARCH_NR_GPIOS to define gpio number. This change is need when we change mxc gpio driver to be device tree aware. When migrating the driver to device tree, pdev->id becomes unusable. It requires driver get gpio range from gpio core, which will dynamically allocates number from ARCH_NR_GPIOS to 0. As a bonus point, it removes lines of '#if' and make the code a little bit cleaner. The side effect is the waste of number. But this is not a point when we go single image. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-08gpio/mxc: get rid of the uses of cpu_is_mx()Shawn Guo
The patch removes all the uses of cpu_is_mx(). Instead, it utilizes platform_device_id to distinguish the different gpio types, IMX1_GPIO on i.mx1, IMX21_GPIO on i.mx21 and i.mx27, IMX31_GPIO on all other i.mx SoCs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-08Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: drop __initdata tags from static struct platform_device declarations
2011-07-08ARM: S3C2440: fix section mismatch on mini2440Wolfram Sang
If mini2440_init() is in __init, mini2440_parse_features() should also be in __init. Fixes: (.text+0x9adc): Section mismatch in reference from the function mini2440_parse_features.clone.0() to the (unknown reference) .init.data:(unknown) The function mini2440_parse_features.clone.0() references the (unknown reference) __initdata (unknown). Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Michel Pollet <buserror@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-08ARM: S3C24XX: drop return codes in void function of dma.cWolfram Sang
Commit bb072c3c (ARM / Samsung: Use struct syscore_ops for "core" power management) turned s3c2410_dma_resume_chan() from int to void. So, drop the actual return values, too. Fixes: arch/arm/plat-s3c24xx/dma.c: In function 's3c2410_dma_resume_chan': arch/arm/plat-s3c24xx/dma.c:1238:3: warning: 'return' with a value, in function returning void arch/arm/plat-s3c24xx/dma.c:1250:2: warning: 'return' with a value, in function returning void Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-08ARM: S3C24XX: don't use uninitialized variable in dma.cWolfram Sang
Commit 8970ef47 (S3C24XX: Remove hardware specific registers from DMA calls) removed the parameter dcon in s3c2410_dma_config() and calculates it on its own. So the debug-output for the old parameter can go, too. Fixes: arch/arm/plat-s3c24xx/dma.c: In function 's3c2410_dma_config': arch/arm/plat-s3c24xx/dma.c:1030:2: warning: 'dcon' is used uninitialized in this function Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-07Merge branch 'stable/bug.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: Move check for acpi_sci_override_gsi to xen_setup_acpi_sci.
2011-07-07Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Don't use the EFI reboot method by default x86, suspend: Restore MISC_ENABLE MSR in realmode wakeup x86, reboot: Acer Aspire One A110 reboot quirk x86-32, NUMA: Fix boot regression caused by NUMA init unification on highmem machines
2011-07-07Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and ↵Linus Torvalds
'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: debugobjects: Fix boot crash when kmemleak and debugobjects enabled * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: jump_label: Fix jump_label update for modules oprofile, x86: Fix race in nmi handler while starting counters * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Disable (revert) SCHED_LOAD_SCALE increase sched, cgroups: Fix MIN_SHARES on 64-bit boxen
2011-07-07xen/pci: Move check for acpi_sci_override_gsi to xen_setup_acpi_sci.Konrad Rzeszutek Wilk
Previously we would check for acpi_sci_override_gsi == gsi every time a PCI device was enabled. That works during early bootup, but later on it could lead to triggering unnecessarily the acpi_gsi_to_irq(..) lookup. The reason is that acpi_sci_override_gsi was declared in __initdata and after early bootup could contain bogus values. This patch moves the check for acpi_sci_override_gsi to the site where the ACPI SCI is preset. CC: stable@kernel.org Reported-by: Raghavendra D Prabhu <rprabhu@wnohang.net> Tested-by: Raghavendra D Prabhu <rprabhu@wnohang.net> [http://lists.xensource.com/archives/html/xen-devel/2011-07/msg00154.html] Suggested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-07genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)Simon Guinot
This fixes a regression introduced by e59347a "arm: orion: Use generic irq chip". Depending on the device, interrupts acknowledgement is done by setting or by clearing a dedicated register. Replace irq_gc_ack() with some {set,clr}_bit variants allows to handle both cases. Note that this patch affects the following SoCs: Davinci, Samsung and Orion. Except for this last, the change is minor: irq_gc_ack() is just renamed into irq_gc_ack_set_bit(). For the Orion SoCs, the edge GPIO interrupts support is currently broken. irq_gc_ack() try to acknowledge a such interrupt by setting the corresponding cause register bit. The Orion GPIO device expect the opposite. To fix this issue, the irq_gc_ack_clr_bit() variant is used. Tested on Network Space v2. Reported-by: Joey Oravec <joravec@drewtech.com> Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-07arm: mach-vt8500: add forgotten irq_data conversionWolfram Sang
This platform has not been converted to 'struct irq_data' when the big pile was done. It fails to compile nowadays, because the compatibility code has gone. CC arch/arm/mach-vt8500/irq.o arch/arm/mach-vt8500/irq.c:118:2: error: unknown field 'ack' specified in initializer arch/arm/mach-vt8500/irq.c:118:2: warning: initialization from incompatible pointer type arch/arm/mach-vt8500/irq.c:119:2: error: unknown field 'mask' specified in initializer arch/arm/mach-vt8500/irq.c:119:2: warning: initialization from incompatible pointer type arch/arm/mach-vt8500/irq.c:120:2: error: unknown field 'unmask' specified in initializer arch/arm/mach-vt8500/irq.c:120:2: warning: initialization from incompatible pointer type arch/arm/mach-vt8500/irq.c:121:2: error: unknown field 'set_type' specified in initializer arch/arm/mach-vt8500/irq.c:121:2: warning: initialization from incompatible pointer type make[1]: *** [arch/arm/mach-vt8500/irq.o] Error 1 Add the missing conversion. Tested on a JayPC-Tablet. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Alexey Charkov <alchark@gmail.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-07ARM: 6994/1: smp_twd: Fix typo in 'twd_timer_rate' printingVitaly Kuzmichev
To get hundredths of MHz the rate needs to be divided by 10'000. Here is an example: twd_timer_rate = 123456789 Before the patch: twd_timer_rate / 1000000 = 123 (twd_timer_rate / 1000000) % 100 = 23 Result: 123.23MHz. After being fixed: twd_timer_rate / 1000000 = 123 (twd_timer_rate / 10000) % 100 = 45 Result: 123.45MHz. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-07x86: Don't use the EFI reboot method by defaultMatthew Garrett
Testing suggests that at least some Lenovos and some Intels will fail to reboot via EFI, attempting to jump to an unmapped physical address. In the long run we could handle this by providing a page table with a 1:1 mapping of physical addresses, but for now it's probably just easier to assume that ACPI or legacy methods will be present and reboot via those. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/r/1309985557-15350-1-git-send-email-mjg@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-07x86, suspend: Restore MISC_ENABLE MSR in realmode wakeupKees Cook
Some BIOSes will reset the Intel MISC_ENABLE MSR (specifically the XD_DISABLE bit) when resuming from S3, which can interact poorly with ebba638ae723d8a8fc2f7abce5ec18b688b791d7. In 32bit PAE mode, this can lead to a fault when EFER is restored by the kernel wakeup routines, due to it setting the NX bit for a CPU that (thanks to the BIOS reset) now incorrectly thinks it lacks the NX feature. (64bit is not affected because it uses a common CPU bring-up that specifically handles the XD_DISABLE bit.) The need for MISC_ENABLE being restored so early is specific to the S3 resume path. Normally, MISC_ENABLE is saved in save_processor_state(), but this happens after the resume header is created, so just reproduce the logic here. (acpi_suspend_lowlevel() creates the header, calls do_suspend_lowlevel, which calls save_processor_state(), so the saved processor context isn't available during resume header creation.) [ hpa: Consider for stable if OK in mainline ] Signed-off-by: Kees Cook <kees.cook@canonical.com> Link: http://lkml.kernel.org/r/20110707011034.GA8523@outflux.net Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: <stable@kernel.org> 2.6.38+
2011-07-06ARM: 6987/1: l2x0: fix disabling function to avoid deadlockWill Deacon
The l2x0_disable function attempts to writel with the l2x0_lock held. This results in deadlock when the writel contains an outer_sync call for the platform since the l2x0_lock is already held by the disable function. A further problem is that disabling the L2 without flushing it first can lead to the spin_lock operation becoming visible after the spin_unlock, causing any subsequent L2 maintenance to deadlock. This patch replaces the writel with a call to writel_relaxed in the disabling code and adds a flush before disabling in the control register, preventing livelock from occurring. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-06ARM: 6966/1: ep93xx: fix inverted RTS/DTR signals on uart1Petr Štetiar
It was discovered by Roberto Bergo, that RTS/DTR signals are inverted after the boot, because it was causing him problems with hardware controlled modem connected on ttyAM0. Todd Valentic came with this patch for the issue. Discussion: http://tech.groups.yahoo.com/group/ts-7000/message/20259 Comments from Petr Štetiar: Sorry, but forget to add Acked-by[1]: 1. https://patchwork.kernel.org/patch/873052/ Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Todd Valentic <todd.valentic@sri.com> Tested-by: Roberto Bergo <roberto.bergo@robson.it> Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-06ARM: 6979/1: mach-vt8500: add forgotten irq_data conversionWolfram Sang
This platform has not been converted to 'struct irq_data' when the big pile was done and fails to compile nowadays. Tested on a JayPC-Tablet. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Alexey Charkov <alchark@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-06gpio: Move mpc5200 gpio driver to drivers/gpioGrant Likely
GPIO drivers are getting consolidated into drivers/gpio. While at it, change the driver name to mpc5200-gpio* to avoid collisions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-06ARM: pxa168: correct nand pmu settingLei Wen
The original pair of <0x01db, 208000000> is invalid. Correct it to the valid value. The 6th bit of the NFC APMU register indicates NFC works whether at 156Mhz or 78Mhz. So 0x19b indicates NFC works at 156Mhz, and 0x1db indicates it works at 78Mhz. Signed-off-by: Lei Wen <leiwen@marvell.com> Cc: stable@kernel.org Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-06ARM: pxa910: correct nand pmu settingLei Wen
The original pair of <0x01db, 208000000> is invalid. Correct to the valid value. Signed-off-by: Lei Wen <leiwen@marvell.com> Cc: stable@kernel.org Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-06ARM: pxa: fix PGSR register address calculationPaul Parsons
The file mfp-pxa2xx.c defines a macro, PGSR(), which translates a gpio bank number to a PGSR register address. The function pxa2xx_mfp_suspend() erroneously passed in a gpio number instead of a gpio bank number. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: stable@kernel.org Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-06sparc32,leon: Added __init declaration to leon_flush_needed()Matthias Rosenfelder
The function leon_flush_needed() is called only during bootup from another __init function. Therefore, we can also add __init to leon_flush_needed(). Signed-off-by: Matthias Rosenfelder <rosenfelder.lkml@googlemail.com> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06sparc/irqs: Do not trace arch_local_{*,irq_*} functionsSteven Rostedt
Do not trace arch_local_save_flags(), arch_local_irq_*() and friends. Although they are marked inline, gcc may still make a function out of them and add it to the pool of functions that are traced by the function tracer. This can cause undesirable results (kernel panic, triple faults, etc). Add the notrace notation to prevent them from ever being traced. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06ARM: EXYNOS4: Set appropriate I2C device variantSylwester Nawrocki
Set up a correct I2C bus controller variant name for Exynos4. Without this change the I2C bus driver fails to acquire its clocks. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06Merge branch 'for-spi' into s5p-fixes-for-linusKukjin Kim
2011-07-06ARM: S5PC100: Fix for compilation errorPadmavathi Venna
S5PC100 Compilation fails without this patch Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-07-06ARM: SAMSUNG: Add tx_st_done variablePadmavathi Venna
tx_st_done is required for checking the transmission status of SPI channels with different fifo levels Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06x86, reboot: Acer Aspire One A110 reboot quirkPeter Chubb
Since git commit 660e34cebf0a11d54f2d5dd8838607452355f321 x86: reorder reboot method preferences, my Acer Aspire One hangs on reboot. It appears that its ACPI method for rebooting is broken. The attached patch adds a quirk so that the machine will reboot via the BIOS. [ hpa: verified that the ACPI control on this machine is just plain broken. ] Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au> Link: http://lkml.kernel.org/r/w439iki5vl.wl%25peter@chubb.wattle.id.au Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-07-05ARM: EXYNOS4: Address a section mismatch w/ suspend issue.MyungJoo Ham
The section mismatch in headsmp.S made hotplug stop working after the first instance of suspend-to-RAM and its wakeup. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-05ARM: S5P: Fix bug on init of PWMTimers for HRTimerSangbeom Kim
This patch fixes following. <6>[ 0.000000] sched_clock: 32 bits at 33MHz, ... <6>[ 128.651309] Calibrating delay loop... There is a big jump. The reason is that PWM Timer which is for HRTimer was used before its initialization. So this patch changes its order and following is kernel boot log message after this. <6>[ 0.000000] sched_clock: 32 bits at 33MHz, ... <6>[ 0.000088] Calibrating delay loop... Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-05ARM: SAMSUNG: header file revised to prevent declaring duplicatedMyungJoo Ham
There has been no #ifndef - #define - #endif protection for this header file. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-05ARM: EXYNOS4: fix improper gpio configurationNaveen Krishna Chatradhi
These pins are incorrectly configured for PCM2 configure them to SPDIF(_OUT & _EXT_CLK) Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-05ARM: EXYNOS4: Fix card detection for sdhci 0 and 2Thomas Abraham
On SMDKV310 board, a card detect gpio pin is available that is directly connected to the io pad of the sdhci controller. Fix incorrect value of cd_type field in platform data for sdhci instance 0 and 2. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v0.10.2 at 2024-09-19 17:55:04 (GMT)