summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2012-09-19Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: Fix up TIF_NOTIFY_RESUME sans TIF_SIGPENDING handling. sh: pfc: Release spinlock in sh_pfc_gpio_request_enable() error path sh: intc: Fix up multi-evt irq association.
2012-09-18sh: Fix up TIF_NOTIFY_RESUME sans TIF_SIGPENDING handling.Al Viro
As Al notes, we missed a TIF_NOTIFY_RESUME check which caused any handlers without TIF_SIGPENDING also set to skip the notification: Looks like while it is in the relevant masks *and* checked in do_notify_resume() both on 32bit and 64bit variants since commit ab99c733ae73cce31f2a2434f7099564e5a73d95 ("sh: Make syscall tracer use tracehook notifiers, add TIF_NOTIFY_RESUME.") they are actually *not* reached without simulataneous SIGPENDING, since the actual glue in the callers had not been updated back then and still checks for _TIF_SIGPENDING alone when deciding whether to hit do_notify_resume() or not. Reported-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-09-15Merge branch 'fixes-for-3.6' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull one more DMA-mapping fix from Marek Szyprowski: "This patch fixes very subtle bug (typical off-by-one error) which might appear in very rare circumstances." * 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: arm: mm: fix DMA pool affiliation check
2012-09-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "This tree includes various fixes" Ingo really needs to improve on the whole "explain git pull" part. "Various fixes" indeed. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/hwpb: Invoke __perf_event_disable() if interrupts are already disabled perf/x86: Enable Intel Cedarview Atom suppport perf_event: Switch to internal refcount, fix race with close() oprofile, s390: Fix uninitialized memory access when writing to oprofilefs perf/x86: Fix microcode revision check for SNB-PEBS
2012-09-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc bug fixes from Olof Johansson: - A set of OMAP fixes, about half of them PM/clock related, the rest scattered over the platform code but all small and targeted to real bugs. - Two small i.MX fixes for SSI device clock setup. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: clk-imx35: Fix SSI clock registration ARM: clk-imx25: Fix SSI clock registration ARM: OMAP4: Fix array size for irq_target_cpu ARM: OMAP4: hwmod data: temporarily comment out data for the sl2if IP block ARM: OMAP: hwmod code: Disable module when hwmod enable fails ARM: OMAP3: hwmod data: fix iva2 reset info ARM: OMAP3xxx: clockdomain: fix software supervised wakeup/sleep ARM: OMAP2+: am33xx: Fix the timer fck clock naming convention ARM: OMAP: Config fix for omap3-touchbook board ARM: OMAP: sram: skip the first 16K on OMAP3 HS ARM: OMAP: sram: fix OMAP4 errata handling ARM: OMAP: timer: obey the !CONFIG_OMAP_32K_TIMER
2012-09-13Merge tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into fixesOlof Johansson
ARM: i.MX: Fix SSI clock associations for i.MX25/i.MX35 * tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: ARM: clk-imx35: Fix SSI clock registration ARM: clk-imx25: Fix SSI clock registration + Linux 3.6-rc5
2012-09-13Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "It's been a while... so there's a little more here than normal. Mostly updates from Will for the breakpoint stuff, and plugging a few holes in the user access functions which crept in when domain support was disabled for ARMv7 CPUs." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7529/1: delay: set loops_per_jiffy when moving to timer-based loop ARM: 7528/1: uaccess: annotate [__]{get,put}_user functions with might_fault() ARM: 7527/1: uaccess: explicitly check __user pointer when !CPU_USE_DOMAINS ARM: 7526/1: traps: send SIGILL if get_user fails on undef handling path ARM: 7521/1: Fix semihosting Kconfig text ARM: 7513/1: Make sure dtc is built before running it ARM: 7512/1: Fix XIP build due to PHYS_OFFSET definition moving ARM: 7499/1: mm: Fix vmalloc overlap check for !HIGHMEM ARM: 7503/1: mm: only flush both pmd entries for classic MMU ARM: 7502/1: contextidr: avoid using bfi instruction during notifier ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores ARM: 7497/1: hw_breakpoint: allow single-byte watchpoints on all addresses ARM: 7496/1: hw_breakpoint: don't rely on dfsr to show watchpoint access type ARM: Fix ioremap() of address zero
2012-09-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin Pull blackfin updates from Bob Liu: "One kbuild and a smp build fix." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: kbuild: add symbol prefix arg to kallsyms blackfin: smp: adapt to generic smp helpers
2012-09-11ARM: clk-imx35: Fix SSI clock registrationFabio Estevam
SSI block has two types of clock: ipg: bus clock, the clock needed for accessing registers. per: peripheral clock, the clock needed for generating the bit rate. Currently SSI driver only supports slave mode and only need to handle the ipg clock, because the peripheral clock comes from the master codec. Only register the ipg clock and do not register the peripheral clock for ssi. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org
2012-09-11ARM: clk-imx25: Fix SSI clock registrationFabio Estevam
SSI block has two types of clock: ipg: bus clock, the clock needed for accessing registers. per: peripheral clock, the clock needed for generating the bit rate. Currently SSI driver only supports slave mode and only need to handle the ipg clock, because the peripheral clock comes from the master codec. Only register the ipg clock and do not register the peripheral clock for ssi. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org
2012-09-11kbuild: add symbol prefix arg to kallsymsJames Hogan
Commit 1f2bfbd00e466ff3489b2ca5cc75b1cccd14c123 ("kbuild: link of vmlinux moved to a script") introduced in v3.5-rc1 broke kallsyms on architectures which have symbol prefixes. The --symbol-prefix argument used to be added to the KALLSYMS command line from the architecture Makefile, however this isn't picked up by the new scripts/link-vmlinux.sh. This resulted in symbols like kallsyms_addresses being added which weren't correctly overriding the weak symbols such as _kallsyms_addresses. These could then trigger BUG_ONs in kallsyms code. This is fixed by removing the KALLSYMS addition from the architecture Makefile, and using CONFIG_SYMBOL_PREFIX in the link-vmlinux.sh script to determine whether to add the --symbol-prefix argument. Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-09-11Merge tag 'kvm-3.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Avi Kivity: "A trio of KVM fixes: incorrect lookup of guest cpuid, an uninitialized variable fix, and error path cleanup fix." * tag 'kvm-3.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: fix error paths for failed gfn_to_page() calls KVM: x86: Check INVPCID feature bit in EBX of leaf 7 KVM: PIC: fix use of uninitialised variable.
2012-09-10arm: mm: fix DMA pool affiliation checkThomas Petazzoni
The __free_from_pool() function was changed in e9da6e9905e639b0f842a244bc770b48ad0523e9. Unfortunately, the test that checks whether the provided (start,size) is within the DMA pool has been improperly modified. It used to be: if (start < coherent_head.vm_start || end > coherent_head.vm_end) Where coherent_head.vm_end was non-inclusive (i.e, it did not include the first byte after the pool). The test has been changed to: if (start < pool->vaddr || start > pool->vaddr + pool->size) So now pool->vaddr + pool->size is inclusive (i.e, it includes the first byte after the pool), so the test should be >= instead of >. This bug causes the following message when freeing the *first* DMA coherent buffer that has been allocated, because its virtual address is exactly equal to pool->vaddr + pool->size : WARNING: at /home/thomas/projets/linux-2.6/arch/arm/mm/dma-mapping.c:463 __free_from_pool+0xa4/0xc0() freeing wrong coherent size from pool Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Lior Amsalem <alior@marvell.com> Cc: Maen Suleiman <maen@marvell.com> Cc: Tawfik Bayouk <tawfik@marvell.com> Cc: Shadi Ammouri <shadi@marvell.com> Cc: Eran Ben-Avi <benavi@marvell.com> Cc: Yehuda Yitschak <yehuday@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> [m.szyprowski: rebased onto v3.6-rc5 and resolved conflict] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-09-10KVM: fix error paths for failed gfn_to_page() callsXiao Guangrong
This bug was triggered: [ 4220.198458] BUG: unable to handle kernel paging request at fffffffffffffffe [ 4220.203907] IP: [<ffffffff81104d85>] put_page+0xf/0x34 ...... [ 4220.237326] Call Trace: [ 4220.237361] [<ffffffffa03830d0>] kvm_arch_destroy_vm+0xf9/0x101 [kvm] [ 4220.237382] [<ffffffffa036fe53>] kvm_put_kvm+0xcc/0x127 [kvm] [ 4220.237401] [<ffffffffa03702bc>] kvm_vcpu_release+0x18/0x1c [kvm] [ 4220.237407] [<ffffffff81145425>] __fput+0x111/0x1ed [ 4220.237411] [<ffffffff8114550f>] ____fput+0xe/0x10 [ 4220.237418] [<ffffffff81063511>] task_work_run+0x5d/0x88 [ 4220.237424] [<ffffffff8104c3f7>] do_exit+0x2bf/0x7ca The test case: printf(fmt, ##args); \ exit(-1);} while (0) static int create_vm(void) { int sys_fd, vm_fd; sys_fd = open("/dev/kvm", O_RDWR); if (sys_fd < 0) die("open /dev/kvm fail.\n"); vm_fd = ioctl(sys_fd, KVM_CREATE_VM, 0); if (vm_fd < 0) die("KVM_CREATE_VM fail.\n"); return vm_fd; } static int create_vcpu(int vm_fd) { int vcpu_fd; vcpu_fd = ioctl(vm_fd, KVM_CREATE_VCPU, 0); if (vcpu_fd < 0) die("KVM_CREATE_VCPU ioctl.\n"); printf("Create vcpu.\n"); return vcpu_fd; } static void *vcpu_thread(void *arg) { int vm_fd = (int)(long)arg; create_vcpu(vm_fd); return NULL; } int main(int argc, char *argv[]) { pthread_t thread; int vm_fd; (void)argc; (void)argv; vm_fd = create_vm(); pthread_create(&thread, NULL, vcpu_thread, (void *)(long)vm_fd); printf("Exit.\n"); return 0; } It caused by release kvm->arch.ept_identity_map_addr which is the error page. The parent thread can send KILL signal to the vcpu thread when it was exiting which stops faulting pages and potentially allocating memory. So gfn_to_pfn/gfn_to_page may fail at this time Fixed by checking the page before it is used Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-09ARM: 7529/1: delay: set loops_per_jiffy when moving to timer-based loopWill Deacon
The delay functions may be called by some platforms between switching to the timer-based delay loop but before calibration. In this case, the initial loops_per_jiffy may not be suitable for the timer (although a compromise may be achievable) and delay times may be considered too inaccurate. This patch updates loops_per_jiffy when switching to the timer-based delay loop so that delays are consistent prior to calibration. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-09ARM: 7528/1: uaccess: annotate [__]{get,put}_user functions with might_fault()Will Deacon
The user access functions may generate a fault, resulting in invocation of a handler that may sleep. This patch annotates the accessors with might_fault() so that we print a warning if they are invoked from atomic context and help lockdep keep track of mmap_sem. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-09ARM: 7527/1: uaccess: explicitly check __user pointer when !CPU_USE_DOMAINSRussell King
The {get,put}_user macros don't perform range checking on the provided __user address when !CPU_HAS_DOMAINS. This patch reworks the out-of-line assembly accessors to check the user address against a specified limit, returning -EFAULT if is is out of range. [will: changed get_user register allocation to match put_user] [rmk: fixed building on older ARM architectures] Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-09KVM: x86: Check INVPCID feature bit in EBX of leaf 7Ren, Yongjie
Checks and operations on the INVPCID feature bit should use EBX of CPUID leaf 7 instead of ECX. Signed-off-by: Junjie Mao <junjie.mao@intel.com> Signed-off-by: Yongjie Ren <yongjien.ren@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-08Merge branch 'fixes-for-3.6' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping fixes from Marek Szyprowski: "Another set of fixes for ARM dma-mapping subsystem. Commit e9da6e9905e6 replaced custom consistent buffer remapping code with generic vmalloc areas. It however introduced some regressions caused by limited support for allocations in atomic context. This series contains fixes for those regressions. For some subplatforms the default, pre-allocated pool for atomic allocations turned out to be too small, so a function for setting its size has been added. Another set of patches adds support for atomic allocations to IOMMU-aware DMA-mapping implementation. The last part of this pull request contains two fixes for Contiguous Memory Allocator, which relax too strict requirements." * 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages() ARM: dma-mapping: Refactor out to introduce __in_atomic_pool ARM: dma-mapping: atomic_pool with struct page **pages ARM: Kirkwood: increase atomic coherent pool size ARM: DMA-Mapping: print warning when atomic coherent allocation fails ARM: DMA-Mapping: add function for setting coherent pool size from platform code ARM: relax conditions required for enabling Contiguous Memory Allocator mm: cma: fix alignment requirements for contiguous regions
2012-09-07Merge tag 'omap-fixes-for-v3.6-rc4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for timer, sram, memory corruption, and one board file that affect booting on various omaps. Then some PM related fixes for reset, sleep and wakeup. * tag 'omap-fixes-for-v3.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4: Fix array size for irq_target_cpu ARM: OMAP4: hwmod data: temporarily comment out data for the sl2if IP block ARM: OMAP: hwmod code: Disable module when hwmod enable fails ARM: OMAP3: hwmod data: fix iva2 reset info ARM: OMAP3xxx: clockdomain: fix software supervised wakeup/sleep ARM: OMAP2+: am33xx: Fix the timer fck clock naming convention ARM: OMAP: Config fix for omap3-touchbook board ARM: OMAP: sram: skip the first 16K on OMAP3 HS ARM: OMAP: sram: fix OMAP4 errata handling ARM: OMAP: timer: obey the !CONFIG_OMAP_32K_TIMER
2012-09-07ARM: 7526/1: traps: send SIGILL if get_user fails on undef handling pathWill Deacon
get_user may fail to load from the provided __user address due to an unhandled fault generated by the access. In the case of the undefined instruction trap, this results in failure to load the faulting instruction, in which case we should send SIGILL to the task rather than continue with potentially uninitialised data. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-07ARM: 7521/1: Fix semihosting Kconfig textStephen Boyd
It seems we were missing some text in the title for the semihosting DEBUG_LL option. Add in the "/O" and fix up some minor typos in the help text. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-07ARM: 7513/1: Make sure dtc is built before running itDavid Brown
'make dtbs' in a clean tree will try running the dtc before actually building it. Make these rules depend upon the scripts to build it. Cc: <stable@vger.kernel.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-07ARM: 7512/1: Fix XIP build due to PHYS_OFFSET definition movingStephen Boyd
During the p2v changes, the PHYS_OFFSET #define moved into a !__ASSEMBLY__ section. This causes a XIP build to fail with arch/arm/kernel/head.o: In function 'stext': arch/arm/kernel/head.S:146: undefined reference to 'PHYS_OFFSET' Momentarily leave the #ifndef __ASSEMBLY__ section so we can define PHYS_OFFSET for all compilation units. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-07blackfin: smp: adapt to generic smp helpersSteven Miao
Replace blackfin ipi message queue with generic smp helper function. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-09-07Merge tag 'stable/for-linus-3.6-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: * Fix for TLB flushing introduced in v3.6 * Fix Xen-SWIOTLB not using proper DMA mask - device had 64bit but in a 32-bit kernel we need to allocate for coherent pages from a 32-bit pool. * When trying to re-use P2M nodes we had a one-off error and triggered a BUG_ON check with specific CONFIG_ option. * When doing FLR in Xen-PCI-backend we would first do FLR then save the PCI configuration space. We needed to do it the other way around. * tag 'stable/for-linus-3.6-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pciback: Fix proper FLR steps. xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory.
2012-09-06Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC bug fixes from Olof Johansson: "Mostly Renesas and Atmel bugfixes this time, targeting boot and build problems. A couple of patches for gemini and kirkwood as well. On a whole nothing very controversial." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: gemini: fix the gemini build ARM: shmobile: armadillo800eva: enable rw rootfs mount ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c ARM: shmobile: mackerel: fixup usb module order ARM: shmobile: armadillo800eva: fixup: sound card detection order ARM: shmobile: marzen: fixup smsc911x id for regulator ARM: at91/feature-removal-schedule: delay at91_mci removal ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptions ARM: at91/dts: remove partial parameter in at91sam9g25ek.dts ARM: at91/clock: fix PLLA overclock warning ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support ARM: at91: fix system timer irq issue due to sparse irq support ARM: shmobile: sh73a0: fixup RELOC_BASE of intca_irq_pins_desc
2012-09-06uml: fix compile error in deliver_alarm()Miklos Szeredi
Fix the following compile error on UML. arch/um/os-Linux/time.c: In function 'deliver_alarm': arch/um/os-Linux/time.c:117:3: error: too few arguments to function 'alarm_handler' arch/um/os-Linux/internal.h:1:6: note: declared here The error was introduced by commit d3c1cfcd ("um: pass siginfo to guest process") in 3.6-rc1. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Martin Pärtel <martin.partel@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-05Merge tag 'omap-fixes-a-for-3.6rc' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes Some hwmod, clockdomain, am335x fixes against v3.6-rc4. Test logs can be found here: http://www.pwsan.com/omap/testlogs/omap_fixes_a_3.6rc/20120904110254/
2012-09-05Merge branch 'fixes-wakeupgen' into fixesTony Lindgren
2012-09-05xen: fix logical error in tlb flushingAlex Shi
While TLB_FLUSH_ALL gets passed as 'end' argument to flush_tlb_others(), the Xen code was made to check its 'start' parameter. That may give a incorrect op.cmd to MMUEXT_INVLPG_MULTI instead of MMUEXT_TLB_FLUSH_MULTI. Then it causes some page can not be flushed from TLB. This patch fixed this issue. Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Alex Shi <alex.shi@intel.com> Acked-by: Jan Beulich <jbeulich@suse.com> Tested-by: Yongjie Ren <yongjie.ren@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-05Merge commit '4cb38750d49010ae72e718d46605ac9ba5a851b4' into ↵Konrad Rzeszutek Wilk
stable/for-linus-3.6 * commit '4cb38750d49010ae72e718d46605ac9ba5a851b4': (6849 commits) bcma: fix invalid PMU chip control masks [libata] pata_cmd64x: whitespace cleanup libata-acpi: fix up for acpi_pm_device_sleep_state API sata_dwc_460ex: device tree may specify dma_channel ahci, trivial: fixed coding style issues related to braces ahci_platform: add hibernation callbacks libata-eh.c: local functions should not be exposed globally libata-transport.c: local functions should not be exposed globally sata_dwc_460ex: support hardreset ata: use module_pci_driver drivers/ata/pata_pcmcia.c: adjust suspicious bit operation pata_imx: Convert to clk_prepare_enable/clk_disable_unprepare ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327) v2 [libata] Prevent interface errors with Seagate FreeAgent GoFlex drivers/acpi/glue: revert accidental license-related 6b66d95895c bits libata-acpi: add missing inlines in libata.h i2c-omap: Add support for I2C_M_STOP message flag i2c: Fall back to emulated SMBus if the operation isn't supported natively i2c: Add SCCB support i2c-tiny-usb: Add support for the Robofuzz OSIF USB/I2C converter ...
2012-09-05xen/p2m: Fix one-off error in checking the P2M tree directory.Konrad Rzeszutek Wilk
We would traverse the full P2M top directory (from 0->MAX_DOMAIN_PAGES inclusive) when trying to figure out whether we can re-use some of the P2M middle leafs. Which meant that if the kernel was compiled with MAX_DOMAIN_PAGES=512 we would try to use the 512th entry. Fortunately for us the p2m_top_index has a check for this: BUG_ON(pfn >= MAX_P2M_PFN); which we hit and saw this: (XEN) domain_crash_sync called from entry.S (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.1.2-OVM x86_64 debug=n Tainted: C ]---- (XEN) CPU: 0 (XEN) RIP: e033:[<ffffffff819cadeb>] (XEN) RFLAGS: 0000000000000212 EM: 1 CONTEXT: pv guest (XEN) rax: ffffffff81db5000 rbx: ffffffff81db4000 rcx: 0000000000000000 (XEN) rdx: 0000000000480211 rsi: 0000000000000000 rdi: ffffffff81db4000 (XEN) rbp: ffffffff81793db8 rsp: ffffffff81793d38 r8: 0000000008000000 (XEN) r9: 4000000000000000 r10: 0000000000000000 r11: ffffffff81db7000 (XEN) r12: 0000000000000ff8 r13: ffffffff81df1ff8 r14: ffffffff81db6000 (XEN) r15: 0000000000000ff8 cr0: 000000008005003b cr4: 00000000000026f0 (XEN) cr3: 0000000661795000 cr2: 0000000000000000 Fixes-Oracle-Bug: 14570662 CC: stable@vger.kernel.org # only for v3.5 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-05Merge branch 'urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent Pull s390 oprofile fix from Robert Richter. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-05powerpc: Don't use __put_user() in patch_instructionBenjamin Herrenschmidt
patch_instruction() can be called very early on ppc32, when the kernel isn't yet running at it's linked address. That can cause the ! is_kernel_addr() test in __put_user() to trip and call might_sleep() which is very bad at that point during boot. Use a lower level function instead for now, at least until we get to rework ppc32 boot process to do the code patching later, like ppc64 does. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Make sure IPI handlers see data written by IPI sendersPaul Mackerras
We have been observing hangs, both of KVM guest vcpu tasks and more generally, where a process that is woken doesn't properly wake up and continue to run, but instead sticks in TASK_WAKING state. This happens because the update of rq->wake_list in ttwu_queue_remote() is not ordered with the update of ipi_message in smp_muxed_ipi_message_pass(), and the reading of rq->wake_list in scheduler_ipi() is not ordered with the reading of ipi_message in smp_ipi_demux(). Thus it is possible for the IPI receiver not to see the updated rq->wake_list and therefore conclude that there is nothing for it to do. In order to make sure that anything done before smp_send_reschedule() is ordered before anything done in the resulting call to scheduler_ipi(), this adds barriers in smp_muxed_message_pass() and smp_ipi_demux(). The barrier in smp_muxed_message_pass() is a full barrier to ensure that there is a full ordering between the smp_send_reschedule() caller and scheduler_ipi(). In smp_ipi_demux(), we use xchg() rather than xchg_local() because xchg() includes release and acquire barriers. Using xchg() rather than xchg_local() makes sense given that ipi_message is not just accessed locally. This moves the barrier between setting the message and calling the cause_ipi() function into the individual cause_ipi implementations. Most of them -- those that used outb, out_8 or similar -- already had a full barrier because out_8 etc. include a sync before the MMIO store. This adds an explicit barrier in the two remaining cases. These changes made no measurable difference to the speed of IPIs as measured using a simple ping-pong latency test across two CPUs on different cores of a POWER7 machine. The analysis of the reason why processes were not waking up properly is due to Milton Miller. Cc: stable@vger.kernel.org # v3.0+ Reported-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Restore correct DSCR in context switchAnton Blanchard
During a context switch we always restore the per thread DSCR value. If we aren't doing explicit DSCR management (ie thread.dscr_inherit == 0) and the default DSCR changed while the process has been sleeping we end up with the wrong value. Check thread.dscr_inherit and select the default DSCR or per thread DSCR as required. This was found with the following test case, when running with more threads than CPUs (ie forcing context switching): http://ozlabs.org/~anton/junkcode/dscr_default_test.c With the four patches applied I can run a combination of all test cases successfully at the same time: http://ozlabs.org/~anton/junkcode/dscr_default_test.c http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Fix DSCR inheritance in copy_thread()Anton Blanchard
If the default DSCR is non zero we set thread.dscr_inherit in copy_thread() meaning the new thread and all its children will ignore future updates to the default DSCR. This is not intended and is a change in behaviour that a number of our users have hit. We just need to inherit thread.dscr and thread.dscr_inherit from the parent which ends up being much simpler. This was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_default_test.c Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Keep thread.dscr and thread.dscr_inherit in syncAnton Blanchard
When we update the DSCR either via emulation of mtspr(DSCR) or via a change to dscr_default in sysfs we don't update thread.dscr. We will eventually update it at context switch time but there is a period where thread.dscr is incorrect. If we fork at this point we will copy the old value of thread.dscr into the child. To avoid this, always keep thread.dscr in sync with reality. This issue was found with the following testcase: http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Update DSCR on all CPUs when writing sysfs dscr_defaultAnton Blanchard
Writing to dscr_default in sysfs doesn't actually change the DSCR - we rely on a context switch on each CPU to do the work. There is no guarantee we will get a context switch in a reasonable amount of time so fire off an IPI to force an immediate change. This issue was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc/powernv: Always go into nap mode when CPU is offlinePaul Mackerras
The CPU hotplug code for the powernv platform currently only puts offline CPUs into nap mode if the powersave_nap variable is set. However, HV-style KVM on this platform requires secondary CPU threads to be offline and in nap mode. Since we know nap mode works just fine on all POWER7 machines, and the only machines that support the powernv platform are POWER7 machines, this changes the code to always put offline CPUs into nap mode, regardless of powersave_nap. Powersave_nap still controls whether or not CPUs go into nap mode when idle, as before. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Give hypervisor decrementer interrupts their own handlerPaul Mackerras
At the moment the handler for hypervisor decrementer interrupts is the same as for decrementer interrupts, i.e. timer_interrupt(). This is bogus; if we ever do get a hypervisor decrementer interrupt it won't have anything to do with the next timer event. In fact the only time we get hypervisor decrementer interrupts is when one is left pending on exit from a KVM guest. When we get a hypervisor decrementer interrupt we don't need to do anything special to clear it, since they are edge-triggered on the transition of HDEC from 0 to -1. Thus this adds an empty handler function for them. We don't need to have them masked when interrupts are soft-disabled, so we use STD_EXCEPTION_HV instead of MASKABLE_EXCEPTION_HV. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc/vphn: Fix arch_update_cpu_topology() return valueJesse Larrew
arch_update_cpu_topology() should only return 1 when the topology has actually changed, and should return 0 otherwise. This patch fixes a potential bug where rebuild_sched_domains() would reinitialize the sched domains even when the topology hasn't changed. Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05ARM: gemini: fix the gemini buildLinus Walleij
Test-compiling obscure machines I notice that the gemini (which by the way lacks a defconfig) is broken since some time back. Adding a simple missing include makes it build again. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-05Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Two regression fixes and one boot-loader compatibility fix from Simon Horman. * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: armadillo800eva: enable rw rootfs mount ARM: shmobile: mackerel: fixup usb module order ARM: shmobile: armadillo800eva: fixup: sound card detection order
2012-09-05ARM: OMAP4: Fix array size for irq_target_cpuTony Lindgren
If NR_IRQS is less than MAX_IRQS, we end up writing past the irq_target_cpu array in omap_wakeupgen_init(): /* Associate all the IRQs to boot CPU like GIC init does. */ for (i = 0; i < max_irqs; i++) irq_target_cpu[i] = boot_cpu; This can happen if SPARSE_IRQ is enabled as by default NR_IRQS is set to 16. Without this patch we're overwriting other data during the boot. Looks like a similar fix was posted by Benoit Cousson earlier as "ARM: OMAP2+: wakeupgen: Fix wrong array size for irq_target_cpu" but was lost. Cc: stable@vger.kernel.org Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-04perf/x86: Enable Intel Cedarview Atom suppportStephane Eranian
This patch enables perf_events support for Intel Cedarview Atom (model 54) processors. Support includes PEBS and LBR. Tested on my Atom N2600 netbook. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120820092421.GA11284@quad Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-04KVM: PIC: fix use of uninitialised variable.Jamie Iles
Commit aea218f3cbbc (KVM: PIC: call ack notifiers for irqs that are dropped form irr) used an uninitialised variable to track whether an appropriate apic had been found. This could result in calling the ack notifier incorrectly. Cc: Gleb Natapov <gleb@redhat.com> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-03Merge branches 'clkdev_fixes_3.6rc', 'clkdm_fixes_3.6rc' and ↵Paul Walmsley
'hwmod_data_fixes_a_3.6rc' into omap_fixes_a_3.6rc
2012-09-03ARM: OMAP4: hwmod data: temporarily comment out data for the sl2if IP blockTero Kristo
The OMAP4 sl2if IP block requires some special programming for it to enter idle. Without this programming, it will prevent the rest of the chip from entering full chip idle. This patch comments out the IP block data. Later, once the appropriate support is available, this patch can be reverted. Cc: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>