summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-09-20powerpc: Use for_each_node_by_type instead of open coding itAnton Blanchard
Use for_each_node_by_type instead of open coding it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Remove double of_node_put in hot_add_node_scn_to_nidAnton Blanchard
During memory hotplug testing, I got the following warning: ERROR: Bad of_node_put() on /memory@0 of_node_release kref_put of_node_put of_find_node_by_type hot_add_node_scn_to_nid hot_add_scn_to_nid memory_add_physaddr_to_nid ... of_find_node_by_type() loop does the of_node_put for us so we only need the handle the case where we terminate the loop early. As suggested by Stephen Rothwell we can do the of_node_put unconditionally outside of the loop since of_node_put handles a NULL argument fine. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Remove duplicate RECLAIM_DISTANCE definitionAnton Blanchard
We have two identical definitions of RECLAIM_DISTANCE, looks like the patch got applied twice. Remove one. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Disable NEWIDLE balancing at node levelAnton Blanchard
On big POWER7 boxes we see large amounts of CPU time in system processes like workqueue and watchdog kernel threads. We currently rebalance the entire machine each time a task goes idle and this is very expensive on large machines. Disable newidle balancing at the node level and rely on the scheduler tick to rebalance across nodes. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Increase SD_NODES_PER_DOMAIN to 32.Anton Blanchard
The largest POWER7 boxes have 32 nodes. SD_NODES_PER_DOMAIN groups nodes into chunks of 16 and adds a global balancing domain (SD_ALLNODES) above it. If we bump SD_NODES_PER_DOMAIN to 32, then we avoid this extra level of balancing on our largest boxes. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Enable SD_WAKE_AFFINE in node definitionAnton Blanchard
When chasing a performance issue on ppc64, I noticed tasks communicating via a pipe would often end up on different nodes. It turns out SD_WAKE_AFFINE is not set in our node defition. Commit 9fcd18c9e63e (sched: re-tune balancing) enabled SD_WAKE_AFFINE in the node definition for x86 and we need a similar change for ppc64. I used lmbench lat_ctx and perf bench pipe to verify this fix. Each benchmark was run 10 times and the average taken. lmbench lat_ctx: before: 66565 ops/sec after: 204700 ops/sec 3.1x faster perf bench pipe: before: 5.6570 usecs after: 1.3470 usecs 4.2x faster Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20Merge remote-tracking branch 'origin/master' into nextBenjamin Herrenschmidt
(Merge in order to get the PCIe mps/mrss code fixes)
2011-09-19powerpc/ps3: Add gelic udbg driverHector Martin
Add a new udbg driver for the PS3 gelic Ehthernet device. This driver shares only a few stucture and constant definitions with the gelic Ethernet device driver, so is implemented as a stand-alone driver with no dependencies on the gelic Ethernet device driver. Signed-off-by: Hector Martin <hector@marcansoft.com> Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19powerpc/eeh: Fix /proc/ppc64/eeh creationThadeu Lima de Souza Cascardo
Since commit 188917e183cf9ad0374b571006d0fc6d48a7f447, /proc/ppc64 is a symlink to /proc/powerpc/. That means that creating /proc/ppc64/eeh will end up with a unaccessible file, that is not listed under /proc/powerpc/ and, then, not listed under /proc/ppc64/. Creating /proc/powerpc/eeh fixes that problem and maintain the compatibility intended with the ppc64 symlink. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org> [3.x]
2011-09-19powerpc/xics: Add __init to marker icp_native_init()Arnaud Lacombe
This should fix the following warning: LD arch/powerpc/sysdev/xics/built-in.o WARNING: arch/powerpc/sysdev/xics/built-in.o(.text+0x1310): Section mismatch in reference from the function .icp_native_init() to the function .init.text:.icp_native_init_one_node() The function .icp_native_init() references the function __init .icp_native_init_one_node(). This is often because .icp_native_init lacks a __init annotation or the annotation of .icp_native_init_one_node is wrong. icp_native_init() is only referenced in `arch/powerpc/sysdev/xics/xics-common.c' by xics_init() which is itself marked with __init. = not built-tested = Reported-by: Timur Tabi <timur@freescale.com> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19powerpc/pseries: Avoid spurious error during hotplug CPU addAnton Blanchard
During hotplug CPU add we get the following error: Unexpected Error (0) returned from configure-connector ibm,configure-connector returns 0 for configuration complete, so catch this and avoid the error. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org>
2011-09-19powerpc/mm: Fix the call trace when resumed from hibernationTang Yuantian
In SMP mode, the kernel would produce call trace when resumed from hibernation. The reason is when the function destroy_context is called to drop the resuming mm context, the mm->context.active is 1 which is wrong and should be zero. We pass the current->active_mm as previous mm context to function switch_mmu_context to decrease the context.active by 1. In UP mode, there is no effect. Signed-off-by: Tang Yuantian <b29983@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19powerpc/4xx/pci: Add __init annotations for *init_port_hw() functions.Tony Breeds
The various port_init_hw methods of ppc4xx_pciex_hwops should have been marked __init and when I added ppc4xx_pciex_port_reset_sdr(), which is __init. This added many section mismatch warnings like: WARNING: arch/powerpc/sysdev/built-in.o(.text+0x5c68): Section mismatch in reference from the function ppc440spe_pciex_init_port_hw() to the function .init.text:ppc4xx_pciex_port_reset_sdr() The function ppc440spe_pciex_init_port_hw() references the function __init ppc4xx_pciex_port_reset_sdr(). This is often because ppc440spe_pciex_init_port_hw lacks a __init annotation or the annotation of ppc4xx_pciex_port_reset_sdr is wrong. Trivial patch to silence those warnings. Reported-By: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Yours Tony Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19powerpc/wsp: Add MSI support for PCI on PowerENMichael Ellerman
Based on a patch by Michael Ellerman <michael@ellerman.id.au> Patch was simply forward ported upstream. Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19powerpc/wsp: Add PCIe Root support to PowerEN/WSPBenjamin Herrenschmidt
Based on a patch by Benjamin Herrenschmidt <benh@kernel.crashing.org> Modernized and slightly modified to not record erros into the nvram log since we do not have that device driver just yet. Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19powerpc/wsp: Fix Wire Speed Processor platform configsJimi Xenidis
Some config selections were applied to the platform (reference board) when they actuall apply to the chip. Signed-off-by: Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19pseries/iommu: Add missing kfreeJulia Lawall
At this point, window has not been stored anywhere, so it has to be freed before leaving the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19powerpc/32: Pass device tree address as u64 to machine_initScott Wood
u64 is used rather than phys_addr_t to keep things simple, as this is called from assembly code. Update callers to pass a 64-bit address in r3/r4. Other unused register assignments that were once parameters to machine_init are dropped. For FSL BookE, look up the physical address of the device tree from the effective address passed in r3 by the loader. This is required for situations where memory does not start at zero (due to AMP or IOMMU-less virtualization), and thus the IMA doesn't start at zero, and thus the device tree effective address does not equal the physical address. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19powerpc/nvram: Add compression to fit more oops output into NVRAMJim Keniston
Capture more than twice as much text from the printk buffer, and compress it to fit it in the lnx,oops-log NVRAM partition. You can view the compressed text using the new (as of July 20) --unzip option of the nvram command in the powerpc-utils package. [BenH: Added select of ZLIB_DEFLATE] Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19powerpc: Fix build dependencies for epapr.c which needs libfdt.hMatthew McClintock
Currently, the build can (very rarely) fail to build because libfdt.h has not been created or is in the process of being copied. Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19powerpc/mpic: Add support for discontiguous coresTimur Tabi
There is one place in the MPIC driver that assumes that the cores are numbered from 0 to n-1. However, this is not true if the CPUs are not numbered sequentially. This can happen on a eight-core SOC where cores two and three are removed in the device tree. So instead of blindly looping, we iterate over the discovered CPUs and use the SMP ID as the index. This means that we no longer ask the MPIC how many CPUs there are, so we also delete mpic->num_cpus. We also catch if the number of CPUs in the SOC exceeds the number that the MPIC supports. This should never happen, of course, but it's good to be sure. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19powerpc: Hugetlb for BookEBecky Bruce
Enable hugepages on Freescale BookE processors. This allows the kernel to use huge TLB entries to map pages, which can greatly reduce the number of TLB misses and the amount of TLB thrashing experienced by applications with large memory footprints. Care should be taken when using this on FSL processors, as the number of large TLB entries supported by the core is low (16-64) on current processors. The supported set of hugepage sizes include 4m, 16m, 64m, 256m, and 1g. Page sizes larger than the max zone size are called "gigantic" pages and must be allocated on the command line (and cannot be deallocated). This is currently only fully implemented for Freescale 32-bit BookE processors, but there is some infrastructure in the code for 64-bit BooKE. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19serial/8250: Move UPIO_TSI to powerpcArnd Bergmann
This iotype is only used by the legacy_serial code in powerpc, so the code should live there, rather than be compiled in for every 8250 driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: linux-serial@vger.kernel.org Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19powerpc: Tidy up dma_map_ops after adding new hookMilton Miller
The new get_required_mask hook name is longer than many of but not all of the prior ops. Tidy the struct initializers to align the equal signs using the local whitespace. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Cc: benh@kernel.crashing.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19powerpc: Use the newly added get_required_mask dma_map_ops hookMilton Miller
Now that the generic code has dma_map_ops set, instead of having a messy ifdef & if block in the base dma_get_required_mask hook push the computation into the dma ops. If the ops fails to set the get_required_mask hook default to the width of dma_addr_t. This also corrects ibmbus ibmebus_dma_supported to require a 64 bit mask. I doubt anything is checking or setting the dma mask on that bus. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Cc: benh@kernel.crashing.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-16Merge branch 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xenLinus Torvalds
* 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xen: xen/i386: follow-up to "replace order-based range checking of M2P table by linear one" xen/irq: Alter the locking to use a mutex instead of a spinlock. xen/e820: if there is no dom0_mem=, don't tweak extra_pages. xen: disable PV spinlocks on HVM
2011-09-15asm alternatives: remove incorrect alignment notesLinus Torvalds
On x86-64, they were just wasteful: with the explicitly added (now unnecessary) padding, the size of the alternatives structure was 16 bytes, and an alignment of 8 bytes didn't hurt much. However, it was still silly, since the natural size and alignment for the structure is actually just 12 bytes, 4-byte aligned since commit 59e97e4d6fbc ("x86: Make alternative instruction pointers relative"). So removing the padding, and removing the extra alignment is just a good idea. On x86-32, the alignment of 4 bytes was correct, but was incorrectly hardcoded as 8 bytes in <asm/alternative-asm.h>. That header file had used to be an x86-64 only header file, but various unification efforts have made it be used for x86-32 too (ie the unification of rwlock and rwsem). That in turn caused x86-32 boot failures, because the extra alignment would result in random zero-filled words in the altinstructions section, causing oopses early at boot when doing alternative instruction replacement. So just remove all the alignment noise entirely. It's wrong, and it's unnecessary. The section itself is already properly aligned by the linker scripts, and all additions to the section had better be of the proper 12-byte format, keeping it aligned. So if the align directive were to ever make a difference, that would be an indication of a serious bug to begin with. Reported-by: Werner Landgraf <w.landgraf@ru.r> Acked-by: Andrew Lutomirski <luto@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-15xen/i386: follow-up to "replace order-based range checking of M2P table by ↵Jan Beulich
linear one" The numbers obtained from the hypervisor really can't ever lead to an overflow here, only the original calculation going through the order of the range could have. This avoids the (as Jeremy points outs) somewhat ugly NULL-based calculation here. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-15alpha, gpio: GENERIC_GPIO default must be nBen Hutchings
Since GPIOLIB is optional on alpha, GENERIC_GPIO must not be selected by default. If GPIOLIB is enabled, it will select GENERIC_GPIO. See <http://bugs.debian.org/638696> for an example of what 'def_bool y' breaks. Reported-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Cree <mcree@orcon.net.nz> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-15um: fix strrchr() problemsAl Viro
richard@nod.at: Fixes: /usr/lib/gcc/x86_64-linux-gnu/4.4.5/../../../../lib/libc.a(strrchr.o): In function `rindex': (.text+0x0): multiple definition of `strrchr' If both STATIC_LINK and UML_NET_VDE are set to "y" libc's strrchr may clash with the kernel implementation. This workaround comes originally from Jeff Dike: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=494995#35 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-15um: clean arch_ptrace() up a bitAl Viro
1) take subarch-specific stuff to subarch_ptrace() 2) PTRACE_{PEEK,POKE}{TEXT,DATA} is handled by ptrace_request() just fine... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-15um: PTRACE_[GS]ETFPXREGS had been wired on the wrong subarchAl Viro
It's 32bit-only, not 64bit-only... And while we are at it, it's set_fpxregs(), not set_fpregs()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-15um: fix free_winch() messAl Viro
while not doing free_irq() from irq handler is commendable, kfree() on the data passed to said handler before free_irq() is Not Good(tm). Freeing the stack it's being run on is also not nice... Solution: delay actually freeing stuff. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-15um: winch_interrupt() can happen inside of free_winch()Al Viro
... so set winch->fd to -1 before doing free_irq(), to avoid having winch_interrupt() come from/during the latter and attempt to do reactivate_fd() on something that's already gone. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-15um: fix oopsable race in line_close()Al Viro
tty->count is decremented only after ->close() had been called and several tasks can hit it in parallel. As the result, using tty->count to check if you are the last one is broken. We end up leaving line->tty not reset to NULL and the next IRQ on that sucker will blow up trying to dereference pointers from kfree'd struct tty. Fix is obvious: we need to use a counter of our own. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-15um: Save FPU registers between task switchesIngo van Lil
Some time ago Jeff prepared 42daba316557 ("uml: stop saving process FP state") for UML to stop saving the process FP state between task switches. The assumption was that since with SKAS0 every guest process runs inside a host process context the host OS will take care of keeping the proper FP state. Unfortunately this is not true for multi-threaded applications, where all guest threads share a single host process context yet all may use the FPU on their own. Although I haven't verified it I suspect things to be even worse in SKAS3 mode where all guest processes run inside a single host process. The patch reintroduces the saving and restoring of the FP context between task switches. [richard@nod.at: Ingo posted this patch in 2009, sadly it was never applied and got lost. Now in 2011 the problem was reported by Gunnar.] Signed-off-by: Ingo van Lil <inguin@gmx.de> Signed-off-by: Richard Weinberger <richard@nod.at> Reported-by: <gunnarlindroth@hotmail.com> Tested-by: <gunnarlindroth@hotmail.com> Cc: Stanislav Meduna <stano@meduna.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-15um: drivers/xterm.c: fix a file descriptor leakJonathan Neuschäfer
I could use out_close1, but that seems to be the code path to close the fd returned by os_create_unix_socket, and using it to close the fd returned by mkstemp might lead to some confusion, so I don't do it. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-15um: disable CMPXCHG_DOUBLE as it breaks UML buildThadeu Lima de Souza Cascardo
Commit b789ef518b2 ("slub: Add cmpxchg_double_slab()") tests for cmpxchg_double support in the SLUB code and it breaks UML builds with SLUB. Since UML does not support checking for CPU features, disable CMPXCHG_DOUBLE just like CMPXCHG_LOCAL is disabled for UML. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Reviewed-by: Christoph Lameter <cl@linux.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-13xen/e820: if there is no dom0_mem=, don't tweak extra_pages.David Vrabel
The patch "xen: use maximum reservation to limit amount of usable RAM" (d312ae878b6aed3912e1acaaf5d0b2a9d08a4f11) breaks machines that do not use 'dom0_mem=' argument with: reserve RAM buffer: 000000133f2e2000 - 000000133fffffff (XEN) mm.c:4976:d0 Global bit is set to kernel page fffff8117e (XEN) domain_crash_sync called from entry.S (XEN) Domain 0 (vcpu#0) crashed on cpu#0: ... The reason being that the last E820 entry is created using the 'extra_pages' (which is based on how many pages have been freed). The mentioned git commit sets the initial value of 'extra_pages' using a hypercall which returns the number of pages (if dom0_mem has been used) or -1 otherwise. If the later we return with MAX_DOMAIN_PAGES as basis for calculation: return min(max_pages, MAX_DOMAIN_PAGES); and use it: extra_limit = xen_get_max_pages(); if (extra_limit >= max_pfn) extra_pages = extra_limit - max_pfn; else extra_pages = 0; which means we end up with extra_pages = 128GB in PFNs (33554432) - 8GB in PFNs (2097152, on this specific box, can be larger or smaller), and then we add that value to the E820 making it: Xen: 00000000ff000000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 000000133f2e2000 (usable) which is clearly wrong. It should look as so: Xen: 00000000ff000000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 000000027fbda000 (usable) Naturally this problem does not present itself if dom0_mem=max:X is used. CC: stable@kernel.org Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-13Merge branch 'upstream/bugfix' of git://github.com/jsgf/linux-xenLinus Torvalds
* 'upstream/bugfix' of git://github.com/jsgf/linux-xen: xen: use non-tracing preempt in xen_clocksource_read()
2011-09-12Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'fixes' of git://git.linaro.org/people/arnd/arm-soc: ARM: CSR: add missing sentinels to of_device_id tables ARM: cns3xxx: Fix newly introduced warnings in the PCIe code ARM: cns3xxx: Fix compile error caused by hardware.h removed ARM: davinci: fix cache flush build error ARM: davinci: correct MDSTAT_STATE_MASK ARM: davinci: da850 EVM: read mac address from SPI flash OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[] OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomain OMAP4: clock: fix compile warning OMAP4: clock: re-enable previous clockdomain enable/disable sequence OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup OMAP: powerdomains: Make all powerdomain target states as ON at init
2011-09-12Merge branch 'for_3.1/pm-fixes-2' of ↵Arnd Bergmann
git://gitorious.org/khilman/linux-omap-pm into fixes
2011-09-12Merge branch 'sirf/fixes' into fixesArnd Bergmann
2011-09-11Merge branch 'for-linus' of git://openrisc.net/~jonas/linuxLinus Torvalds
* 'for-linus' of git://openrisc.net/~jonas/linux: Add missing DMA ops openrisc: don't use pt_regs in struct sigcontext
2011-09-11Add missing DMA opsJonas Bonn
For the initial architecture submission, not all of the DMA ops were implemented. This patch adds the *map_page and *map_sg variants of the DMA mapping ops. This patch is currently of interest mainly to some drivers that haven't been submitted upstream yet. Signed-off-by: Jonas Bonn <jonas@southpole.se>
2011-09-11ARM: CSR: add missing sentinels to of_device_id tablesJamie Iles
The of_device_id tables used for matching should be terminated with empty sentinel values. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Barry Song <baohua.song@csr.com>
2011-09-11Merge branch 'fixes' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7088/1: entry: fix wrong parameter name used in do_thumb_abort ARM: 7080/1: l2x0: make sure I&D are not locked down on init ARM: 7081/1: mach-integrator: fix the clocksource NET: am79c961: fix race in link status code ARM: 7067/1: mm: keep significant bits in pfn_valid
2011-09-10ARM: 7088/1: entry: fix wrong parameter name used in do_thumb_abortJanusz Krzysztofik
Commit be020f8618ca, "ARM: entry: abort-macro: specify registers to be used for macros", while replacing register numbers with macro parameter names, mismatched the name used for r1. For me, this resulted in user space built for EABI with -march=armv4t -mtune=arm920t -mthumb-interwork -mthumb broken on my OMAP1510 based Amstrad Delta (old ABI and no thumb still worked for me though). Fix this by using correct parameter name fsr instead of mismatched psr, used by callers for another purpose. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-10Merge branches 'cns3xxx/fixes', 'omap/fixes' and 'davinci/fixes' into fixesArnd Bergmann
2011-09-10Fix pointer dereference before call to pcie_bus_configure_settingsShyam Iyer
Commit b03e7495a862 ("PCI: Set PCI-E Max Payload Size on fabric") introduced a potential NULL pointer dereference in calls to pcie_bus_configure_settings due to attempts to access pci_bus self variables when the self pointer is NULL. To correct this, verify that the self pointer in pci_bus is non-NULL before dereferencing it. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Shyam Iyer <shyam_iyer@dell.com> Signed-off-by: Jon Mason <mason@myri.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v0.10.2 at 2024-11-02 14:40:48 (GMT)