summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-10-18h8300: drivers/serial/Kconfig was movedPaul Bolle
commit ab4382d27412e7e3e7c936e8d50d8888dfac3df8 moved drivers/serial/Kconfig to drivers/tty/serial/Kconfig, so we need to source the latter file. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-26x86/mrst: Add platform data for Max3110 devicesFeng Tang
Those info will be used when spi controller driver setup max3110 as a slave device Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23mips: msp71xx/serial: add workaround for DW UARTJamie Iles
The Synopsys DesignWare UART in pmc-sierra msp71xx has an extra feature where the UART detects a write attempt to the LCR whilst busy and raises an interrupt. The driver needs to clear the interrupt and rewrite the LCR. Move this into platform code and out of the 8250 driver. Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23mips: msp71xx/serial: convert to pr_foo() helpersJamie Iles
Convert to pr_foo() helpers rather than printk(KERN_.*). Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Anoop P A<Anoop_P.A@pmc-sierra.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23ARM: SAMSUNG: Remove uart irq handling from plaform codeThomas Abraham
With uart tx/rx/err interrupt handling moved into the driver for s3c64xx and later SoC's, the uart interrupt handling in plaform code can be removed. The uart device irq resources is reduced to one and the related unused macros are removed. Suggested-by: Grant Likely <grant.likely@secretlab.ca> CC: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driverTimur Tabi
The ePAPR embedded hypervisor specification provides an API for "byte channels", which are serial-like virtual devices for sending and receiving streams of bytes. This driver provides Linux kernel support for byte channels via three distinct interfaces: 1) An early-console (udbg) driver. This provides early console output through a byte channel. The byte channel handle must be specified in a Kconfig option. 2) A normal console driver. Output is sent to the byte channel designated for stdout in the device tree. The console driver is for handling kernel printk calls. 3) A tty driver, which is used to handle user-space input and output. The byte channel used for the console is designated as the default tty. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22Merge branch 'stable/bug.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/tracing: Fix tracing config option properly xen: Do not enable PV IPIs when vector callback not present xen/x86: replace order-based range checking of M2P table by linear one xen: xen-selfballoon.c needs more header files
2011-08-22xen/tracing: Fix tracing config option properlyJeremy Fitzhardinge
Steven Rostedt says we should use CONFIG_EVENT_TRACING. Cc:Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-22xen: Do not enable PV IPIs when vector callback not presentStefano Stabellini
Fix regression for HVM case on older (<4.1.1) hypervisors caused by commit 99bbb3a84a99cd04ab16b998b20f01a72cfa9f4f Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Date: Thu Dec 2 17:55:10 2010 +0000 xen: PV on HVM: support PV spinlocks and IPIs This change replaced the SMP operations with event based handlers without taking into account that this only works when the hypervisor supports callback vectors. This causes unexplainable hangs early on boot for HVM guests with more than one CPU. BugLink: http://bugs.launchpad.net/bugs/791850 CC: stable@kernel.org Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-and-Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: OF: Don't crash when bridge parent is NULL. PCI: export pcie_bus_configure_settings symbol PCI: code and comments cleanup PCI: make cardbus-bridge resources optional PCI: make SRIOV resources optional PCI : ability to relocate assigned pci-resources PCI: honor child buses add_size in hot plug configuration PCI: Set PCI-E Max Payload Size on fabric
2011-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: fix array bounds error setting up PCIC NMI trap
2011-08-19sparc: fix array bounds error setting up PCIC NMI trapIan Campbell
CC arch/sparc/kernel/pcic.o arch/sparc/kernel/pcic.c: In function 'pcic_probe': arch/sparc/kernel/pcic.c:359:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:359:8: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:360:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:360:8: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:361:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:361:8: error: array subscript is above array bounds [-Werror=array-bounds] cc1: all warnings being treated as errors I'm not particularly familiar with sparc but t_nmi (defined in head_32.S via the TRAP_ENTRY macro) and pcic_nmi_trap_patch (defined in entry.S) both appear to be 4 instructions long and I presume from the usage that instructions are int sized. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17xen/x86: replace order-based range checking of M2P table by linear oneJan Beulich
The order-based approach is not only less efficient (requiring a shift and a compare, typical generated code looking like this mov eax, [machine_to_phys_order] mov ecx, eax shr ebx, cl test ebx, ebx jnz ... whereas a direct check requires just a compare, like in cmp ebx, [machine_to_phys_nr] jae ... ), but also slightly dangerous in the 32-on-64 case - the element address calculation can wrap if the next power of two boundary is sufficiently far away from the actual upper limit of the table, and hence can result in user space addresses being accessed (with it being unknown what may actually be mapped there). Additionally, the elimination of the mistaken use of fls() here (should have been __fls()) fixes a latent issue on x86-64 that would trigger if the code was run on a system with memory extending beyond the 44-bit boundary. CC: stable@kernel.org Signed-off-by: Jan Beulich <jbeulich@novell.com> [v1: Based on Jeremy's feedback] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-16Merge branch 'kvm-updates/3.1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/3.1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: uses TASKSTATS, depends on NET KVM: fix TASK_DELAY_ACCT kconfig warning
2011-08-16Merge branch 'fixallnoconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'fixallnoconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix "allnoconfig" build
2011-08-16KVM: uses TASKSTATS, depends on NETRandy Dunlap
CONFIG_TASKSTATS just had a change to use netlink, including a change to "depends on NET". Since "select" does not follow dependencies, KVM also needs to depend on NET to prevent build errors when CONFIG_NET is not enabled. Sample of the reported "undefined reference" build errors: taskstats.c:(.text+0x8f686): undefined reference to `nla_put' taskstats.c:(.text+0x8f721): undefined reference to `nla_reserve' taskstats.c:(.text+0x8f8fb): undefined reference to `init_net' taskstats.c:(.text+0x8f905): undefined reference to `netlink_unicast' taskstats.c:(.text+0x8f934): undefined reference to `kfree_skb' taskstats.c:(.text+0x8f9e9): undefined reference to `skb_clone' taskstats.c:(.text+0x90060): undefined reference to `__alloc_skb' taskstats.c:(.text+0x901e9): undefined reference to `skb_put' taskstats.c:(.init.text+0x4665): undefined reference to `genl_register_family' taskstats.c:(.init.text+0x4699): undefined reference to `genl_register_ops' taskstats.c:(.init.text+0x4710): undefined reference to `genl_unregister_ops' taskstats.c:(.init.text+0x471c): undefined reference to `genl_unregister_family' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-08-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Set HAVE_C_RECORDMCOUNT sparc32: unbreak arch_write_unlock() sparc64: remove unnecessary macros from spinlock_64.h
2011-08-16x86: fix mm/fault.c buildRandy Dunlap
arch/x86/mm/fault.c needs to include asm/vsyscall.h to fix a build error: arch/x86/mm/fault.c: In function '__bad_area_nosemaphore': arch/x86/mm/fault.c:728: error: 'VSYSCALL_START' undeclared (first use in this function) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-15sparc64: Set HAVE_C_RECORDMCOUNTDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-15sparc32: unbreak arch_write_unlock()Mikael Pettersson
The sparc32 version of arch_write_unlock() is just a plain assignment. Unfortunately this allows the compiler to schedule side-effects in a protected region to occur after the HW-level unlock, which is broken. E.g., the following trivial test case gets miscompiled: #include <linux/spinlock.h> rwlock_t lock; int counter; void foo(void) { write_lock(&lock); ++counter; write_unlock(&lock); } Fixed by adding a compiler memory barrier to arch_write_unlock(). The sparc64 version combines the barrier and assignment into a single asm(), and implements the operation as a static inline, so that's what I did too. Compile-tested with sparc32_defconfig + CONFIG_SMP=y. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-15sparc64: remove unnecessary macros from spinlock_64.hMikael Pettersson
The sparc64 spinlock_64.h contains a number of operations defined first as static inline functions, and then as macros with the same names and parameters as the functions. Maybe this was needed at some point in the past, but now nothing seems to depend on these macros (checked with a recursive grep looking for ifdefs on these names). Other archs don't define these identity-macros. So this patch deletes these unnecessary macros. Compile-tested with sparc64_defconfig. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-tip * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-tip: x86-64: Rework vsyscall emulation and add vsyscall= parameter x86-64: Wire up getcpu syscall x86: Remove unnecessary compile flag tweaks for vsyscall code x86-64: Add vsyscall:emulate_vsyscall trace event x86-64: Add user_64bit_mode paravirt op x86-64, xen: Enable the vvar mapping x86-64: Work around gold bug 13023 x86-64: Move the "user" vsyscall segment out of the data segment. x86-64: Pad vDSO to a page boundary
2011-08-13Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (32 commits) ARM: mmp: Change the way we use timer 0 as clockevent timer. ARM: mmp: Switch to using timer 1 as clocksource timer. ARM: mmp: Also start timer 1 on boot. ARM: pxa168/gplugd: free correct GPIO ARM: pxa168/gplugd: get rid of mfp-gplugd.h ARM: pxa: fix logic error in PJ4 iWMMXt handling mach-sa1100: fix PCI build problem omap: timer: Set dmtimer used as clocksource in autoreload mode OMAP3: am3517crane: remove NULL board_mux from board file arm: mach-omap2: mux: use kstrdup() arch:arm:plat-omap:iovmm: remove unused variable 'va' Update Nook Color machine 3284 to common Encore name am3505/3517: Various platform defines for UART4 OMAP: hwmod: fix build break on non-OMAP4 multi-OMAP2 builds OMAP: Fix linking error in twl-common.c for OMAP2/3/4 only builds iMX: Fix build for iMX53 ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage OMAP2+: PM: SmartReflex: use put_sync_suspend for IRQ-safe disabling OMAP3: beagle: don't touch omap_device internals OMAP1: enable GENERIC_IRQ_CHIP ...
2011-08-12Merge branch 'fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into fixes
2011-08-12Merge branch 'fix' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes
2011-08-12Merge branch 'imx-fixes-for-arnd' of ↵Arnd Bergmann
git://git.pengutronix.de/git/imx/linux-2.6 into fixes
2011-08-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Don't do hypervisor calls on non-sun4v in DS driver.
2011-08-12sparc: Don't do hypervisor calls on non-sun4v in DS driver.David S. Miller
Reported-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf symbols: Check '/tmp/perf-' symbol file ownership perf sched: Usage leftover from trace -> script rename perf sched: Do not delete session object prematurely perf tools: Check $HOME/.perfconfig ownership perf, x86: Add model 45 SandyBridge support perf tools: Add support to install perf python extension perf tools: do not look at ./config for configuration perf tools: Make clean leaves some files perf lock: Dropping unsupported ':r' modifier perf probe: Fix coredump introduced by probe module option jump label: Reduce the cycle count by changing the link order perf report: Use ui__warning in some more places perf python: Add PERF_RECORD_{LOST,READ,SAMPLE} routine tables perf evlist: Introduce 'disable' method trace events: Update version number reference to new 3.x scheme for EVENT_POWER_TRACING_DEPRECATED perf buildid-cache: Zero out buffer of filenames when adding/removing buildid
2011-08-11ARM: mmp: Change the way we use timer 0 as clockevent timer.Lennert Buytenhek
Instead of setting up a match interrupt for 'current_time + delta' on ->set_next_event(), program timer 0 to count down from 'delta - 1' and trigger an interrupt when it reaches zero. Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: mmp: Switch to using timer 1 as clocksource timer.Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: mmp: Also start timer 1 on boot.Lennert Buytenhek
Currently, arch-mmp/time.c uses timer 0 both as a clocksource timer and as a clockevent timer, the latter by setting up a comparator interrupt to match on 'current_time + delta'. This is problematic if delta is small enough, as that can lead to 'current_time + delta' already being in the past when comparator setup has finished, leading to the requested event not triggering. As there is also a silicon issue that requires stopping a timer's counter while writing to one of its match registers, we'll switch to using two separate timers -- timer 0 as clockevent timer, which we'll start and stop on every invocation of ->set_next_event(), and timer 1 as clocksource timer, which will be free-running. This first patch enables timer 1 on boot, so that we can use it as clocksource timer. Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: pxa168/gplugd: free correct GPIOTanmay Upadhyay
Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: pxa168/gplugd: get rid of mfp-gplugd.hTanmay Upadhyay
Move definitions from mfp-gplugd.h to mfp-pxa168.h as they aren't gplugD specific. Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11ARM: pxa: fix logic error in PJ4 iWMMXt handlingLennert Buytenhek
This got added in: commit ef6c84454f8567d4968c210d7d194fb711ed3739 Author: Haojian Zhuang <haojian.zhuang@marvell.com> Date: Wed Nov 24 11:54:25 2010 +0800 ARM: pxa: add iwmmx support for PJ4 which does: - mrc p15, 0, r2, c15, c1, 0 - orr r2, r2, #0x3 @ enable access to CP0 and CP1 - mcr p15, 0, r2, c15, c1, 0 + @ enable access to CP0 and CP1 + XSC(mrc p15, 0, r2, c15, c1, 0) + XSC(orr r2, r2, #0x3) + XSC(mcr p15, 0, r2, c15, c1, 0) but then later does: - mrc p15, 0, r4, c15, c1, 0 - orr r4, r4, #0x3 @ enable access to CP0 and CP1 - mcr p15, 0, r4, c15, c1, 0 + @ enable access to CP0 and CP1 + XSC(mrc p15, 0, r4, c15, c1, 0) + XSC(orr r4, r4, #0xf) + XSC(mcr p15, 0, r4, c15, c1, 0) Signed-off-by: Lennert Buytenhek <buytenh@laptop.org> Acked-by Haojian <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-08-11Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: drop experimental status for ARM_PATCH_PHYS_VIRT ARM: 7008/1: alignment: Make SIGBUS sent to userspace POSIXly correct ARM: 7007/1: alignment: Prevent ignoring of faults with ARMv6 unaligned access model ARM: 7010/1: mm: fix invalid loop for poison_init_mem ARM: 7005/1: freshen up mm/proc-arm946.S dmaengine: PL08x: Fix trivial build error ARM: Fix build error for SMP=n builds
2011-08-11x86-64: Rework vsyscall emulation and add vsyscall= parameterAndy Lutomirski
There are three choices: vsyscall=native: Vsyscalls are native code that issues the corresponding syscalls. vsyscall=emulate (default): Vsyscalls are emulated by instruction fault traps, tested in the bad_area path. The actual contents of the vsyscall page is the same as the vsyscall=native case except that it's marked NX. This way programs that make assumptions about what the code in the page does will not be confused when they read that code. vsyscall=none: Trying to execute a vsyscall will segfault. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/8449fb3abf89851fd6b2260972666a6f82542284.1312988155.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-11x86-64: Wire up getcpu syscallAndy Lutomirski
getcpu is available as a vdso entry and an emulated vsyscall. Programs that for some reason don't want to use the vdso should still be able to call getcpu without relying on the slow emulated vsyscall. It costs almost nothing to expose it as a real syscall. We also need this for the following patch in vsyscall=native mode. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/6b19f55bdb06a0c32c2fa6dba9b6f222e1fde999.1312988155.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-10x86: Remove unnecessary compile flag tweaks for vsyscall codeAndy Lutomirski
As of commit 98d0ac38ca7b1b7a552c9a2359174ff84decb600 Author: Andy Lutomirski <luto@mit.edu> Date: Thu Jul 14 06:47:22 2011 -0400 x86-64: Move vread_tsc and vread_hpet into the vDSO user code no longer directly calls into code in arch/x86/kernel/, so we don't need compile flag hacks to make it safe. All vdso code is in the vdso directory now. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/835cd05a4c7740544d09723d6ba48f4406f9826c.1312988155.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-08-10Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Really fix build without CONFIG_PCI powerpc: Fix build without CONFIG_PCI powerpc/4xx: Fix build of PCI code on 405 powerpc/pseries: Simplify vpa deregistration functions powerpc/pseries: Cleanup VPA registration and deregistration errors powerpc/pseries: Fix kexec on recent firmware versions MAINTAINERS: change maintainership of mpc5xxx powerpc: Make KVM_GUEST default to n powerpc/kvm: Fix build errors with older toolchains powerpc: Lack of ibm,io-events not that important! powerpc: Move kdump default base address to half RMO size on 64bit powerpc/perf: Disable pagefaults during callchain stack read ppc: Remove duplicate definition of PV_POWER7 powerpc: pseries: Fix kexec on machines with more than 4TB of RAM powerpc: Jump label misalignment causes oops at boot powerpc: Clean up some panic messages in prom_init powerpc: Fix device tree claim code powerpc: Return the_cpu_ spec from identify_cpu powerpc: mtspr/mtmsr should take an unsigned long
2011-08-10mach-sa1100: fix PCI build problemLinus Walleij
The PCI nanoengine driver in the SA1100 machine probably has not been building for some time. It probably dragged hardware.h in implicitly and now it doesn't anymore. After this an SA1100 build selecting all system variants will build successfully. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-08-10powerpc: Really fix build without CONFIG_PCIBenjamin Herrenschmidt
Brown paper bag day, previous commit wouldn't work very well with modules enabled. Move the exports into the ifdef. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-10omap: timer: Set dmtimer used as clocksource in autoreload modeHemant Pedanekar
If CONFIG_OMAP_32K_TIMER is not selected and dmtimer is used as clocksource, the timer stops counting once overflow occurs as it was not set in autoreload mode. This results into timekeeping failure: for example, 'sleep 1' at the shell after the timer counter overflow would hang. This patch sets up autoreload when starting the clocksource timer which fixes the above issue. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10OMAP3: am3517crane: remove NULL board_mux from board fileJohan Hovold
Since 7203f8a48bb63015ebe58a6f2a38aec1cb208b9d (arm: mach-omap2: remove NULL board_mux from board files) NULL board_mux is defined in mux.h. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10arm: mach-omap2: mux: use kstrdup()Thomas Meyer
Use kstrdup rather than duplicating its implementation The semantic patch that makes this output is available in scripts/coccinelle/api/kstrdup.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10arch:arm:plat-omap:iovmm: remove unused variable 'va'Maxin John
The pointer "va" returned from "phys_to_virt(pa)" is never used in "sgtable_fill_kmalloc()".So,it is safe to remove this set-but-unused variable. Signed-off-by: Maxin B. John <maxin.john@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10Update Nook Color machine 3284 to common Encore nameOleg Drokin
Machine database already updated: http://www.arm.linux.org.uk/developer/machines/list.php?id=3284 Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10am3505/3517: Various platform defines for UART4Raphaël Assénat
Add missing definitions for the AM3505/3517 UART4 such as DMAs, INTs and base address. Signed-of-by: Raphael Assenat <raph@8d.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10Merge branch 'for_3.1/pm-fixes' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into fixes
2011-08-10ARM: drop experimental status for ARM_PATCH_PHYS_VIRTRussell King
This has now been well tested, and several platforms are now selecting this directly. It's time to drop its experimental status. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v0.10.2 at 2024-11-04 08:23:35 (GMT)