summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-02-20Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform changes from Ingo Molnar: - Support for the Technologic Systems TS-5500 platform, by Vivien Didelot - Improved NUMA support on AMD systems: Add support for federated systems where multiple memory controllers can exist and see each other over multiple PCI domains. This basically means that AMD node ids can be more than 8 now and the code handling this is taught to incorporate PCI domain into those IDs. - Support for the Goldfish virtual Android emulator, by Jun Nakajima, Intel, Google, et al. - Misc fixlets. * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Add TS-5500 platform support x86/srat: Simplify memory affinity init error handling x86/apb/timer: Remove unnecessary "if" goldfish: platform device for x86 amd64_edac: Fix type usage in NB IDs and memory ranges amd64_edac: Fix PCI function lookup x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_id x86, AMD, NB: Add multi-domain support
2013-02-20Merge branch 'x86-hyperv-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/hyperv changes from Ingo Molnar: "The biggest change is support for Windows 8's improved hypervisor interrupt model on the Linux Hyper-V guest subsystem code side. Smallish fixes otherwise." * 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, hyperv: HYPERV depends on X86_LOCAL_APIC X86: Handle Hyper-V vmbus interrupts as special hypervisor interrupts X86: Add a check to catch Xen emulation of Hyper-V x86: Hyper-V: register clocksource only if its advertised
2013-02-20Merge branch 'x86-debug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/debug changes from Ingo Molnar: "Two init annotations and a built-in memtest speedup" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/memtest: Shorten time for tests x86: Convert a few mistaken __cpuinit annotations to __init x86/EFI: Properly init-annotate BGRT code
2013-02-20Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanup patches from Ingo Molnar: "Misc smaller cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: ptrace.c only needs export.h and not the full module.h x86, apb_timer: remove unused variable percpu_timer um: don't compare a pointer to 0 arch/x86/platform/uv: use ARRAY_SIZE where possible
2013-02-20Merge branch 'x86-build-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull two x86 kernel build changes from Ingo Molnar: "The first change modifies how 'make oldconfig' works on cross-bitness situations on x86. It was felt the new behavior of preserving the bitness of the .config is more logical. This is a leftover of the merge. The second change eliminates a Perl warning. (There's another, more complete fix resulting of this warning fix, which second fix in flight to you via the kbuild tree, which will remove the timeconst.pl script altogether.)" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timeconst.pl: Eliminate Perl warning x86: Default to ARCH=x86 to avoid overriding CONFIG_64BIT
2013-02-20Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 bootup changes from Ingo Molnar: "Deal with bootloaders which fail to initialize unknown fields in boot_params to zero, by sanitizing boot params passed in. This unbreaks versions of kexec-utils. Other bootloaders do not appear to show sensitivity to this change, but it's a possibility for breakage nevertheless." * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, boot: Sanitize boot_params if not zeroed on creation
2013-02-20Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/asm changes from Ingo Molnar: "The biggest change (by line count) is the unification of the XOR code and then the introduction of an additional SSE based XOR assembly method. The other bigger change is the head_32.S rework/cleanup by Borislav Petkov. Last but not least there's the usual laundry list of small but dangerous (and hopefully perfectly tested) changes to subtle low level x86 code, plus cleanups." * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, head_32: Give the 6 label a real name x86, head_32: Remove second CPUID detection from default_entry x86: Detect CPUID support early at boot x86, head_32: Remove i386 pieces x86: Require MOVBE feature in cpuid when we use it x86: Enable ARCH_USE_BUILTIN_BSWAP x86/xor: Add alternative SSE implementation only prefetching once per 64-byte line x86/xor: Unify SSE-base xor-block routines x86: Fix a typo x86/mm: Fix the argument passed to sync_global_pgds() x86/mm: Convert update_mmu_cache() and update_mmu_cache_pmd() to functions ix86: Tighten asmlinkage_protect() constraints
2013-02-20Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/apic changes from Ingo Molnar: "Main changes: - Multiple MSI support added to the APIC, PCI and AHCI code - acked by all relevant maintainers, by Alexander Gordeev. The advantage is that multiple AHCI ports can have multiple MSI irqs assigned, and can thus spread to multiple CPUs. [ Drivers can make use of this new facility via the pci_enable_msi_block_auto() method ] - x86 IOAPIC code from interrupt remapping cleanups from Joerg Roedel: These patches move all interrupt remapping specific checks out of the x86 core code and replaces the respective call-sites with function pointers. As a result the interrupt remapping code is better abstraced from x86 core interrupt handling code. - Various smaller improvements, fixes and cleanups." * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) x86/intel/irq_remapping: Clean up x2apic opt-out security warning mess x86, kvm: Fix intialization warnings in kvm.c x86, irq: Move irq_remapped out of x86 core code x86, io_apic: Introduce eoi_ioapic_pin call-back x86, msi: Introduce x86_msi.compose_msi_msg call-back x86, irq: Introduce setup_remapped_irq() x86, irq: Move irq_remapped() check into free_remapped_irq x86, io-apic: Remove !irq_remapped() check from __target_IO_APIC_irq() x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core x86, irq: Add data structure to keep AMD specific irq remapping information x86, irq: Move irq_remapping_enabled declaration to iommu code x86, io_apic: Remove irq_remapping_enabled check in setup_timer_IRQ0_pin x86, io_apic: Move irq_remapping_enabled checks out of check_timer() x86, io_apic: Convert setup_ioapic_entry to function pointer x86, io_apic: Introduce set_affinity function pointer x86, msi: Use IRQ remapping specific setup_msi_irqs routine x86, hpet: Introduce x86_msi_ops.setup_hpet_msi x86, io_apic: Introduce x86_io_apic_ops.print_entries for debugging x86, io_apic: Introduce x86_io_apic_ops.disable() x86, apic: Mask IO-APIC and PIC unconditionally on LAPIC resume ...
2013-02-20Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer changes from Ingo Molnar: "Main changes: - ntp: Add CONFIG_RTC_SYSTOHC: a generic RTC driver facility complementing the existing CONFIG_RTC_HCTOSYS, which uses NTP to keep the hardware clock updated. - posix-timers: Fix clock_adjtime to always return timex data on success. This is changing the ABI, but no breakage was expected and found - caution is warranted nevertheless. - platform persistent clock improvements/cleanups. - clockevents: refactor timer broadcast handling to be more generic and less duplicated with matching architecture code (mostly ARM motivated.) - various fixes and cleanups" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers/x86/hpet: Use HPET_COUNTER to specify the hpet counter in vread_hpet() posix-cpu-timers: Fix nanosleep task_struct leak clockevents: Fix generic broadcast for FEAT_C3STOP time, Fix setting of hardware clock in NTP code hrtimer: Prevent hrtimer_enqueue_reprogram race clockevents: Add generic timer broadcast function clockevents: Add generic timer broadcast receiver timekeeping: Switch HAS_PERSISTENT_CLOCK to ALWAYS_USE_PERSISTENT_CLOCK x86/time/rtc: Don't print extended CMOS year when reading RTC x86: Select HAS_PERSISTENT_CLOCK on x86 timekeeping: Add CONFIG_HAS_PERSISTENT_CLOCK option rtc: Skip the suspend/resume handling if persistent clock exist timekeeping: Add persistent_clock_exist flag posix-timers: Fix clock_adjtime to always return timex data on success Round the calculated scale factor in set_cyc2ns_scale() NTP: Add a CONFIG_RTC_SYSTOHC configuration MAINTAINERS: Update John Stultz's email time: create __getnstimeofday for WARNless calls
2013-02-20Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "Main changes: - scheduler side full-dynticks (user-space execution is undisturbed and receives no timer IRQs) preparation changes that convert the cputime accounting code to be full-dynticks ready, from Frederic Weisbecker. - Initial sched.h split-up changes, by Clark Williams - select_idle_sibling() performance improvement by Mike Galbraith: " 1 tbench pair (worst case) in a 10 core + SMT package: pre 15.22 MB/sec 1 procs post 252.01 MB/sec 1 procs " - sched_rr_get_interval() ABI fix/change. We think this detail is not used by apps (so it's not an ABI in practice), but lets keep it under observation. - misc RT scheduling cleanups, optimizations" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched/rt: Add <linux/sched/rt.h> header to <linux/init_task.h> cputime: Remove irqsave from seqlock readers sched, powerpc: Fix sched.h split-up build failure cputime: Restore CPU_ACCOUNTING config defaults for PPC64 sched/rt: Move rt specific bits into new header file sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice sched: Move sched.h sysctl bits into separate header sched: Fix signedness bug in yield_to() sched: Fix select_idle_sibling() bouncing cow syndrome sched/rt: Further simplify pick_rt_task() sched/rt: Do not account zero delta_exec in update_curr_rt() cputime: Safely read cputime of full dynticks CPUs kvm: Prepare to add generic guest entry/exit callbacks cputime: Use accessors to read task cputime stats cputime: Allow dynamic switch between tick/virtual based cputime accounting cputime: Generic on-demand virtual cputime accounting cputime: Move default nsecs_to_cputime() to jiffies based cputime file cputime: Librarize per nsecs resolution cputime definitions cputime: Avoid multiplication overflow on utime scaling context_tracking: Export context state for generic vtime ... Fix up conflict in kernel/context_tracking.c due to comment additions.
2013-02-20Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf changes from Ingo Molnar: "There are lots of improvements, the biggest changes are: Main kernel side changes: - Improve uprobes performance by adding 'pre-filtering' support, by Oleg Nesterov. - Make some POWER7 events available in sysfs, equivalent to what was done on x86, from Sukadev Bhattiprolu. - tracing updates by Steve Rostedt - mostly misc fixes and smaller improvements. - Use perf/event tracing to report PCI Express advanced errors, by Tony Luck. - Enable northbridge performance counters on AMD family 15h, by Jacob Shin. - This tracing commit: tracing: Remove the extra 4 bytes of padding in events changes the ABI. All involved parties (PowerTop in particular) seem to agree that it's safe to do now with the introduction of libtraceevent, but the devil is in the details ... Main tooling side changes: - Add 'event group view', from Namyung Kim: To use it, 'perf record' should group events when recording. And then perf report parses the saved group relation from file header and prints them together if --group option is provided. You can use the 'perf evlist' command to see event group information: $ perf record -e '{ref-cycles,cycles}' noploop 1 [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ] $ perf evlist --group {ref-cycles,cycles} With this example, default perf report will show you each event separately. You can use --group option to enable event group view: $ perf report --group ... # group: {ref-cycles,cycles} # ======== # Samples: 7K of event 'anon group { ref-cycles, cycles }' # Event count (approx.): 6876107743 # # Overhead Command Shared Object Symbol # ................ ....... ................. .......................... 99.84% 99.76% noploop noploop [.] main 0.07% 0.00% noploop ld-2.15.so [.] strcmp 0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del 0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu 0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time 0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask 0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe 0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock 0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page 0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks 0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time As you can see the Overhead column now contains both of ref-cycles and cycles and header line shows group information also - 'anon group { ref-cycles, cycles }'. The output is sorted by period of group leader first. - Initial GTK+ annotate browser, from Namhyung Kim. - Add option for runtime switching perf data file in perf report, just press 's' and a menu with the valid files found in the current directory will be presented, from Feng Tang. - Add support to display whole group data for raw columns, from Jiri Olsa. - Add per processor socket count aggregation in perf stat, from Stephane Eranian. - Add interval printing in 'perf stat', from Stephane Eranian. - 'perf test' improvements - Add support for wildcards in tracepoint system name, from Jiri Olsa. - Add anonymous huge page recognition, from Joshua Zhu. - perf build-id cache now can show DSOs present in a perf.data file that are not in the cache, to integrate with build-id servers being put in place by organizations such as Fedora. - perf top now shares more of the evsel config/creation routines with 'record', paving the way for further integration like 'top' snapshots, etc. - perf top now supports DWARF callchains. - Fix mmap limitations on 32-bit, fix from David Miller. - 'perf bench numa mem' NUMA performance measurement suite - ... and lots of fixes, performance improvements, cleanups and other improvements I failed to list - see the shortlog and git log for details." * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits) perf/x86/amd: Enable northbridge performance counters on AMD family 15h perf/hwbp: Fix cleanup in case of kzalloc failure perf tools: Fix build with bison 2.3 and older. perf tools: Limit unwind support to x86 archs perf annotate: Make it to be able to skip unannotatable symbols perf gtk/annotate: Fail early if it can't annotate perf gtk/annotate: Show source lines with gray color perf gtk/annotate: Support multiple event annotation perf ui/gtk: Implement basic GTK2 annotation browser perf annotate: Fix warning message on a missing vmlinux perf buildid-cache: Add --update option uprobes/perf: Avoid uprobe_apply() whenever possible uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE uprobes/perf: Teach trace_uprobe/perf code to pre-filter uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's uprobes: Introduce uprobe_apply() perf: Introduce hw_perf_event->tp_target and ->tp_list uprobes/perf: Always increment trace_uprobe->nhit uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe uprobes/tracing: Introduce is_trace_uprobe_enabled() ...
2013-02-20Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core changes from Ingo Molnar: "The biggest changes are the IRQ-work and printk changes from Frederic Weisbecker, which prepare the code for 'full dynticks' (the ability to stop or slow down the periodic tick arbitrarily, not just in idle time as today): - Don't stop tick with irq works pending. This fix is generally useful and concerns archs that can't raise self IPIs. - Flush irq works before CPU offlining. - Introduce "lazy" irq works that can wait for the next tick to be executed, unless it's stopped. - Implement klogd wake up using irq work. This removes the ad-hoc printk_tick()/printk_needs_cpu() hooks and make it working even in dynticks mode. - Cleanups and fixes." * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Export enable/disable_percpu_irq() arch Kconfig: Remove references to IRQ_PER_CPU irq_work: Remove return value from the irq_work_queue() function genirq: Avoid deadlock in spurious handling printk: Wake up klogd using irq_work irq_work: Make self-IPIs optable irq_work: Warn if there's still work on cpu_down irq_work: Flush work on CPU_DYING irq_work: Don't stop the tick with pending works nohz: Add API to check tick state irq_work: Remove CONFIG_HAVE_IRQ_WORK irq_work: Fix racy check on work pending flag irq_work: Fix racy IRQ_WORK_BUSY flag setting
2013-02-18x86/memtest: Shorten time for testsAlexander Holler
By just reversing the order memtest is using the test patterns, an additional round to zero the memory is not necessary. This might save up to a second or even more for setups which are doing tests on every boot. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1361029097-8308-1-git-send-email-holler@ahsoftware.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-16perf/x86/amd: Enable northbridge performance counters on AMD family 15hJacob Shin
On AMD family 15h processors, there are 4 new performance counters (in addition to 6 core performance counters) that can be used for counting northbridge events (i.e. DRAM accesses). Their bit fields are almost identical to the core performance counters. However, unlike the core performance counters, these MSRs are shared between multiple cores (that share the same northbridge). We will reuse the same code path as existing family 10h northbridge event constraints handler logic to enforce this sharing. Signed-off-by: Jacob Shin <jacob.shin@amd.com> Acked-by: Stephane Eranian <eranian@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jacob Shin <jacob.shin@amd.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1360171589-6381-7-git-send-email-jacob.shin@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-15Merge tag 'stable/for-linus-3.8-rc7-tag-two' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: "Two fixes: - A simple bug-fix for redundant NULL check. - CVE-2013-0228/XSA-42: x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS and two reverts: - Revert the PVonHVM kexec. The patch introduces a regression with older hypervisor stacks, such as Xen 4.1." * tag 'stable/for-linus-3.8-rc7-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: Revert "xen PVonHVM: use E820_Reserved area for shared_info" Revert "xen/PVonHVM: fix compile warning in init_hvm_pv_info" xen: remove redundant NULL check before unregister_and_remove_pcpu(). x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS.
2013-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "A couple small fixes for sparc including some THP brown-paper-bag material: 1) During the merging of all the THP support for various architectures, sparc missed adding a HAVE_ARCH_TRANSPARENT_HUGEPAGE to it's Kconfig, oops. 2) Sparc needs to be mindful of hugepages in get_user_pages_fast(). 3) Fix memory leak in SBUS probe, from Cong Ding. 4) The sunvdc virtual disk client driver has a test of the bitmask of vdisk server supported operations which was off by one bit" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sunvdc: Fix off-by-one in generic_request(). sparc64: Fix get_user_pages_fast() wrt. THP. sparc64: Add missing HAVE_ARCH_TRANSPARENT_HUGEPAGE. sparc: kernel/sbus.c: fix memory leakage
2013-02-15timers/x86/hpet: Use HPET_COUNTER to specify the hpet counter in vread_hpet()Satoru Takeuchi
vread_hpet() uses "0xf0" as the offset of the hpet counter. To clarify the meaning of this code, it should use symbolic name, HPET_COUNTER, instead. Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-15Revert "xen PVonHVM: use E820_Reserved area for shared_info"Konrad Rzeszutek Wilk
This reverts commit 9d02b43dee0d7fb18dfb13a00915550b1a3daa9f. We are doing this b/c on 32-bit PVonHVM with older hypervisors (Xen 4.1) it ends up bothing up the start_info. This is bad b/c we use it for the time keeping, and the timekeeping code loops forever - as the version field never changes. Olaf says to revert it, so lets do that. Acked-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-15Revert "xen/PVonHVM: fix compile warning in init_hvm_pv_info"Konrad Rzeszutek Wilk
This reverts commit a7be94ac8d69c037d08f0fd94b45a593f1d45176. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-14x86: ptrace.c only needs export.h and not the full module.hPaul Gortmaker
Commit cb57a2b4cff7edf2a4e32c0163200e9434807e0a ("x86-32: Export kernel_stack_pointer() for modules") added an include of the module.h header in conjunction with adding an EXPORT_SYMBOL_GPL of kernel_stack_pointer. But module.h should be avoided for simple exports, since it in turn includes the world. Swap the module.h for export.h instead. Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Link: http://lkml.kernel.org/r/1360872842-28417-1-git-send-email-paul.gortmaker@windriver.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-14efi: Clear EFI_RUNTIME_SERVICES rather than EFI_BOOT by "noefi" boot parameterSatoru Takeuchi
There was a serious problem in samsung-laptop that its platform driver is designed to run under BIOS and running under EFI can cause the machine to become bricked or can cause Machine Check Exceptions. Discussion about this problem: https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 https://bugzilla.kernel.org/show_bug.cgi?id=47121 The patches to fix this problem: efi: Make 'efi_enabled' a function to query EFI facilities 83e68189745ad931c2afd45d8ee3303929233e7f samsung-laptop: Disable on EFI hardware e0094244e41c4d0c7ad69920681972fc45d8ce34 Unfortunately this problem comes back again if users specify "noefi" option. This parameter clears EFI_BOOT and that driver continues to run even if running under EFI. Refer to the document, this parameter should clear EFI_RUNTIME_SERVICES instead. Documentation/kernel-parameters.txt: =============================================================================== ... noefi [X86] Disable EFI runtime services support. ... =============================================================================== Documentation/x86/x86_64/uefi.txt: =============================================================================== ... - If some or all EFI runtime services don't work, you can try following kernel command line parameters to turn off some or all EFI runtime services. noefi turn off all EFI runtime services ... =============================================================================== Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Link: http://lkml.kernel.org/r/511C2C04.2070108@jp.fujitsu.com Cc: Matt Fleming <matt.fleming@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-13x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS.Jan Beulich
This fixes CVE-2013-0228 / XSA-42 Drew Jones while working on CVE-2013-0190 found that that unprivileged guest user in 32bit PV guest can use to crash the > guest with the panic like this: ------------- general protection fault: 0000 [#1] SMP last sysfs file: /sys/devices/vbd-51712/block/xvda/dev Modules linked in: sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 xen_netfront ext4 mbcache jbd2 xen_blkfront dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 1250, comm: r Not tainted 2.6.32-356.el6.i686 #1 EIP: 0061:[<c0407462>] EFLAGS: 00010086 CPU: 0 EIP is at xen_iret+0x12/0x2b EAX: eb8d0000 EBX: 00000001 ECX: 08049860 EDX: 00000010 ESI: 00000000 EDI: 003d0f00 EBP: b77f8388 ESP: eb8d1fe0 DS: 0000 ES: 007b FS: 0000 GS: 00e0 SS: 0069 Process r (pid: 1250, ti=eb8d0000 task=c2953550 task.ti=eb8d0000) Stack: 00000000 0027f416 00000073 00000206 b77f8364 0000007b 00000000 00000000 Call Trace: Code: c3 8b 44 24 18 81 4c 24 38 00 02 00 00 8d 64 24 30 e9 03 00 00 00 8d 76 00 f7 44 24 08 00 00 02 80 75 33 50 b8 00 e0 ff ff 21 e0 <8b> 40 10 8b 04 85 a0 f6 ab c0 8b 80 0c b0 b3 c0 f6 44 24 0d 02 EIP: [<c0407462>] xen_iret+0x12/0x2b SS:ESP 0069:eb8d1fe0 general protection fault: 0000 [#2] ---[ end trace ab0d29a492dcd330 ]--- Kernel panic - not syncing: Fatal exception Pid: 1250, comm: r Tainted: G D --------------- 2.6.32-356.el6.i686 #1 Call Trace: [<c08476df>] ? panic+0x6e/0x122 [<c084b63c>] ? oops_end+0xbc/0xd0 [<c084b260>] ? do_general_protection+0x0/0x210 [<c084a9b7>] ? error_code+0x73/ ------------- Petr says: " I've analysed the bug and I think that xen_iret() cannot cope with mangled DS, in this case zeroed out (null selector/descriptor) by either xen_failsafe_callback() or RESTORE_REGS because the corresponding LDT entry was invalidated by the reproducer. " Jan took a look at the preliminary patch and came up a fix that solves this problem: "This code gets called after all registers other than those handled by IRET got already restored, hence a null selector in %ds or a non-null one that got loaded from a code or read-only data descriptor would cause a kernel mode fault (with the potential of crashing the kernel as a whole, if panic_on_oops is set)." The way to fix this is to realize that the we can only relay on the registers that IRET restores. The two that are guaranteed are the %cs and %ss as they are always fixed GDT selectors. Also they are inaccessible from user mode - so they cannot be altered. This is the approach taken in this patch. Another alternative option suggested by Jan would be to relay on the subtle realization that using the %ebp or %esp relative references uses the %ss segment. In which case we could switch from using %eax to %ebp and would not need the %ss over-rides. That would also require one extra instruction to compensate for the one place where the register is used as scaled index. However Andrew pointed out that is too subtle and if further work was to be done in this code-path it could escape folks attention and lead to accidents. Reviewed-by: Petr Matousek <pmatouse@redhat.com> Reported-by: Petr Matousek <pmatouse@redhat.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-13sparc64: Fix get_user_pages_fast() wrt. THP.David S. Miller
Mostly mirrors the s390 logic, as unlike x86 we don't need the SetPageReferenced() bits. On sparc64 we also lack a user/privileged bit in the huge PMDs. In order to make this work for THP and non-THP builds, some header file adjustments were necessary. Namely, provide the PMD_HUGE_* bit defines and the pmd_large() inline unconditionally rather than protected by TRANSPARENT_HUGEPAGE. Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13sparc64: Add missing HAVE_ARCH_TRANSPARENT_HUGEPAGE.David S. Miller
This got missed in the cleanups done for the S390 THP support. CC: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "One (hopefully) last batch of x86 fixes. You asked for the patch by patch justifications, so here they are: x86, MCE: Retract most UAPI exports This one unexports from userspace a bunch of definitions which should never have been exported. We really don't want to create an accidental legacy here. x86, doc: Add a bootloader ID for OVMF This is a documentation-only patch, just recording the official assignment of a boot loader ID. x86: Do not leak kernel page mapping locations Security: avoid making it needlessly easy for user space to probe the kernel memory layout. x86/mm: Check if PUD is large when validating a kernel address Prevent failures using /proc/kcore when using 1G pages. x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems Works around a BIOS problem causing boot failures on affected hardware." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Check if PUD is large when validating a kernel address x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems x86, doc: Add a bootloader ID for OVMF x86: Do not leak kernel page mapping locations x86, MCE: Retract most UAPI exports
2013-02-13x86/mm: Check if PUD is large when validating a kernel addressMel Gorman
A user reported the following oops when a backup process reads /proc/kcore: BUG: unable to handle kernel paging request at ffffbb00ff33b000 IP: [<ffffffff8103157e>] kern_addr_valid+0xbe/0x110 [...] Call Trace: [<ffffffff811b8aaa>] read_kcore+0x17a/0x370 [<ffffffff811ad847>] proc_reg_read+0x77/0xc0 [<ffffffff81151687>] vfs_read+0xc7/0x130 [<ffffffff811517f3>] sys_read+0x53/0xa0 [<ffffffff81449692>] system_call_fastpath+0x16/0x1b Investigation determined that the bug triggered when reading system RAM at the 4G mark. On this system, that was the first address using 1G pages for the virt->phys direct mapping so the PUD is pointing to a physical address, not a PMD page. The problem is that the page table walker in kern_addr_valid() is not checking pud_large() and treats the physical address as if it was a PMD. If it happens to look like pmd_none then it'll silently fail, probably returning zeros instead of real data. If the data happens to look like a present PMD though, it will be walked resulting in the oops above. This patch adds the necessary pud_large() check. Unfortunately the problem was not readily reproducible and now they are running the backup program without accessing /proc/kcore so the patch has not been validated but I think it makes sense. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.coM> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: stable@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20130211145236.GX21389@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-13X86: Handle Hyper-V vmbus interrupts as special hypervisor interruptsK. Y. Srinivasan
Starting with win8, vmbus interrupts can be delivered on any VCPU in the guest and furthermore can be concurrently active on multiple VCPUs. Support this interrupt delivery model by setting up a separate IDT entry for Hyper-V vmbus. interrupts. I would like to thank Jan Beulich <JBeulich@suse.com> and Thomas Gleixner <tglx@linutronix.de>, for their help. In this version of the patch, based on the feedback, I have merged the IDT vector for Xen and Hyper-V and made the necessary adjustments. Furhermore, based on Jan's feedback I have added the necessary compilation switches. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Link: http://lkml.kernel.org/r/1359940959-32168-3-git-send-email-kys@microsoft.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-13X86: Add a check to catch Xen emulation of Hyper-VK. Y. Srinivasan
Xen emulates Hyper-V to host enlightened Windows. Looks like this emulation may be turned on by default even for Linux guests. Check and fail Hyper-V detection if we are on Xen. [ hpa: the problem here is that Xen doesn't emulate Hyper-V well enough, and if the Xen support isn't compiled in, we end up stubling over the Hyper-V emulation and try to activate it -- and it fails. ] Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Link: http://lkml.kernel.org/r/1359940959-32168-2-git-send-email-kys@microsoft.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-13x86: Hyper-V: register clocksource only if its advertisedOlaf Hering
Enable hyperv_clocksource only if its advertised as a feature. XenServer 6 returns the signature which is checked in ms_hyperv_platform(), but it does not offer all features. Currently the clocksource is enabled unconditionally in ms_hyperv_init_platform(), and the result is a hanging guest. Hyper-V spec Bit 1 indicates the availability of Partition Reference Counter. Register the clocksource only if this bit is set. The guest in question prints this in dmesg: [ 0.000000] Hypervisor detected: Microsoft HyperV [ 0.000000] HyperV: features 0x70, hints 0x0 This bug can be reproduced easily be setting 'viridian=1' in a HVM domU .cfg file. A workaround without this patch is to boot the HVM guest with 'clocksource=jiffies'. Signed-off-by: Olaf Hering <olaf@aepfle.de> Link: http://lkml.kernel.org/r/1359940959-32168-1-git-send-email-kys@microsoft.com Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux into akpm Pull s390 regression fix from Martin Schwidefsky: "The recent fix for the s390 sched_clock() function uncovered yet another bug in s390_next_ktime which causes an endless loop in KVM. This regression should be fixed before v3.8. I keep the fingers crossed that this is the last one for v3.8." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/timer: avoid overflow when programming clock comparator
2013-02-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu into akpm Pull m68knommu fix from Greg Ungerer: "This contains a single critical fix for the non-MMU m68k platforms. The change of the kernel exec code path has revealed a problem in the start thread code that causes crashing on boot. This is the fix for it." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix trap on execing /bin/init
2013-02-12x86, head_32: Give the 6 label a real nameBorislav Petkov
Jumping here we are about to enable paging so rename the label accordingly. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1360592538-10643-5-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-12x86, head_32: Remove second CPUID detection from default_entryBorislav Petkov
We do that once earlier now and cache it into new_cpu_data.cpuid_level so no need for the EFLAGS.ID toggling dance anymore. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1360592538-10643-4-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-12x86: Detect CPUID support early at bootBorislav Petkov
We detect CPUID function support on each CPU and save it for later use, obviating the need to play the toggle EFLAGS.ID game every time. C code is looking at ->cpuid_level anyway. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1360592538-10643-3-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-12x86, head_32: Remove i386 piecesBorislav Petkov
Remove code fragments detecting a 386 CPU since we don't support those anymore. Also, do not do alignment checks because they're done only at CPL3. Also, no need to preserve EFLAGS. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1360592538-10643-2-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-12Merge tag 'v3.8-rc7' into x86/asmH. Peter Anvin
Merge in the updates to head_32.S from the previous urgent branch, as upcoming patches will make further changes. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-12Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile into akpm Pull tile bugfixes from Chris Metcalf: "This includes a variety of minor bug fixes, mostly to do with testing "make allyesconfig", "make allmodconfig", "make allnoconfig", inspired to Tejun Heo's observation about Kconfig.freezer not being included. The largest changes are just syntax changes removing the tile-specific use of a macro named INT_MASK, which is way too commonly redefined throughout driver code" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: tag some code with #ifdef CONFIG_COMPAT tile: fix memcpy_*io functions for allnoconfig tile: export a handful of symbols appropriately drm: fix compile failure by including <linux/swiotlb.h> tile: avoid defining INT_MASK macro in <arch/interrupts.h> tile: provide "screen_info" when enabling VT drivers/input/joystick/analog.c: enable precise timer tile: include kernel/Kconfig.freezer in tile Kconfig tile: remove an unused variable in copy_thread()
2013-02-11x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systemsStoney Wang
When a HP ProLiant DL980 G7 Server boots a regular kernel, there will be intermittent lost interrupts which could result in a hang or (in extreme cases) data loss. The reason is that this system only supports x2apic physical mode, while the kernel boots with a logical-cluster default setting. This bug can be worked around by specifying the "x2apic_phys" or "nox2apic" boot option, but we want to handle this system without requiring manual workarounds. The BIOS sets ACPI_FADT_APIC_PHYSICAL in FADT table. As all apicids are smaller than 255, BIOS need to pass the control to the OS with xapic mode, according to x2apic-spec, chapter 2.9. Current code handle x2apic when BIOS pass with xapic mode enabled: When user specifies x2apic_phys, or FADT indicates PHYSICAL: 1. During madt oem check, apic driver is set with xapic logical or xapic phys driver at first. 2. enable_IR_x2apic() will enable x2apic_mode. 3. if user specifies x2apic_phys on the boot line, x2apic_phys_probe() will install the correct x2apic phys driver and use x2apic phys mode. Otherwise it will skip the driver will let x2apic_cluster_probe to take over to install x2apic cluster driver (wrong one) even though FADT indicates PHYSICAL, because x2apic_phys_probe does not check FADT PHYSICAL. Add checking x2apic_fadt_phys in x2apic_phys_probe() to fix the problem. Signed-off-by: Stoney Wang <song-bo.wang@hp.com> [ updated the changelog and simplified the code ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org Link: http://lkml.kernel.org/r/1360263182-16226-1-git-send-email-yinghai@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-11sched, powerpc: Fix sched.h split-up build failureIngo Molnar
Fix PowerPC/Cell build fallout from: 8bd75c77b7c6 sched/rt: Move rt specific bits into new header file Reported-by: Michael Ellerman <michael@ellerman.id.au> Cc: Clark Williams <williams@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20130207094707.7b9f825f@riff.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-10Merge tag 'highbank-fixes-for-3.8' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson
into fixes From Rob Herring: highbank fixes for 3.8 -Compile fix for !SMP -More cpu cluster id related fixes * tag 'highbank-fixes-for-3.8' of git://sources.calxeda.com/kernel/linux: ARM: highbank: mask cluster id from cpu_logical_map ARM: scu: mask cluster id from cpu_logical_map ARM: scu: add empty scu_enable for !CONFIG_SMP
2013-02-08Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "I was going to hold these off until v3.8 was out, and send them with a stable tag, but as everyone else is pushing much bigger fixes which Linus is accepting, let's save people from the hastle of having to patch v3.8 back into working or use a stable kernel. Looking at the diffstat, this really is high value for its size; this is miniscule compared to how the -rc6 to tip diffstat currently looks. So, four patches in this set: - Punit Agrawal reports that the kernel no longer boots on MPCore due to a new assumption made in the GIC code which isn't true of earlier GIC designs. This is the biggest change in this set. - Punit's boot log also revealed a bunch of WARN_ON() dumps caused by the DT-ification of the GIC support without fixing up non-DT Realview - which now sees a greater number of interrupts than it did before. - A fix for the DMA coherent code from Marek which uses the wrong check for atomic allocations; this can result in spinlock lockups or other nasty effects. - A fix from Will, which will affect all Android based platforms if not applied (which use the 2G:2G VM split) - this causes particularly 'make' to misbehave unless this bug is fixed." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned ARM: DMA mapping: fix bad atomic test ARM: realview: ensure that we have sufficient IRQs available ARM: GIC: fix GIC cpumask initialization
2013-02-08tile: tag some code with #ifdef CONFIG_COMPATChris Metcalf
This allows us to disable COMPAT mode without a link error. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-02-08tile: fix memcpy_*io functions for allnoconfigChris Metcalf
On tilepro without CONFIG_PCI, we can't provide inlines of these functions, as we don't have readl/writel. In addition, fix memset_io() signature to take a volatile void *. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-02-08tile: export a handful of symbols appropriatelyChris Metcalf
This was shown up by running with "allmodconfig". I used EXPORT_SYMBOL() to match existing conventions in files that were already exporting symbols, or that were exported that way by other architectures, and otherwise EXPORT_SYMBOL_GPL(). Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-02-08uprobes: Change handle_swbp() to expose bp_vaddr to handler_chain()Oleg Nesterov
Change handle_swbp() to set regs->ip = bp_vaddr in advance, this is what consumer->handler() needs but uprobe_get_swbp_addr() is not exported. This also simplifies the code and makes it more consistent across the supported architectures. handle_swbp() becomes the only caller of uprobe_get_swbp_addr(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
2013-02-08uprobes/x86: Change __skip_sstep() to actually skip the whole insnOleg Nesterov
__skip_sstep() doesn't update regs->ip. Currently this is correct but only "by accident" and it doesn't skip the whole insn. Change it to advance ->ip by the length of the detected 0x66*0x90 sequence. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-02-08ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is alignedWill Deacon
We have received multiple reports of mmap failures when running with a 2:2 vm split. These manifest as either -EINVAL with a non page-aligned address (ending 0xaaa) or a SEGV, depending on the application. The issue is commonly observed in children of make, which appears to use bottom-up mmap (assumedly because it changes the stack rlimit). Further investigation reveals that this regression was triggered by 394ef6403abc ("mm: use vm_unmapped_area() on arm architecture"), whereby TASK_UNMAPPED_BASE is no longer page-aligned for bottom-up mmap, causing get_unmapped_area to choke on misaligned addressed. This patch fixes the problem by defining TASK_UNMAPPED_BASE in terms of TASK_SIZE and explicitly aligns the result to 16M, matching the other end of the heap. Acked-by: Nicolas Pitre <nico@linaro.org> Reported-by: Steve Capper <steve.capper@arm.com> Reported-by: Jean-Francois Moine <moinejf@free.fr> Reported-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-08ARM: DMA mapping: fix bad atomic testRussell King
Realview fails to boot with this warning: BUG: spinlock lockup suspected on CPU#0, init/1 lock: 0xcf8bde10, .magic: dead4ead, .owner: init/1, .owner_cpu: 0 Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:cf8bde10 r5:cf83d1c0 r4:cf8bde10 r3:cf83d1c0 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c018926c>] (spin_dump+0x84/0x98) [<c01891e8>] (spin_dump+0x0/0x98) from [<c0189460>] (do_raw_spin_lock+0x100/0x198) [<c0189360>] (do_raw_spin_lock+0x0/0x198) from [<c032cbac>] (_raw_spin_lock+0x3c/0x44) [<c032cb70>] (_raw_spin_lock+0x0/0x44) from [<c01c9224>] (pl011_console_write+0xe8/0x11c) [<c01c913c>] (pl011_console_write+0x0/0x11c) from [<c002aea8>] (call_console_drivers.clone.7+0xdc/0x104) [<c002adcc>] (call_console_drivers.clone.7+0x0/0x104) from [<c002b320>] (console_unlock+0x2e8/0x454) [<c002b038>] (console_unlock+0x0/0x454) from [<c002b8b4>] (vprintk_emit+0x2d8/0x594) [<c002b5dc>] (vprintk_emit+0x0/0x594) from [<c0329718>] (printk+0x3c/0x44) [<c03296dc>] (printk+0x0/0x44) from [<c002929c>] (warn_slowpath_common+0x28/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c) [<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0070ab0>] (lockdep_trace_alloc+0xd8/0xf0) [<c00709d8>] (lockdep_trace_alloc+0x0/0xf0) from [<c00c0850>] (kmem_cache_alloc+0x24/0x11c) [<c00c082c>] (kmem_cache_alloc+0x0/0x11c) from [<c00bb044>] (__get_vm_area_node.clone.24+0x7c/0x16c) [<c00bafc8>] (__get_vm_area_node.clone.24+0x0/0x16c) from [<c00bb7b8>] (get_vm_area_caller+0x48/0x54) [<c00bb770>] (get_vm_area_caller+0x0/0x54) from [<c0020064>] (__alloc_remap_buffer.clone.15+0x38/0xb8) [<c002002c>] (__alloc_remap_buffer.clone.15+0x0/0xb8) from [<c0020244>] (__dma_alloc+0x160/0x2c8) [<c00200e4>] (__dma_alloc+0x0/0x2c8) from [<c00204d8>] (arm_dma_alloc+0x88/0xa0)[<c0020450>] (arm_dma_alloc+0x0/0xa0) from [<c00beb00>] (dma_pool_alloc+0xcc/0x1a8) [<c00bea34>] (dma_pool_alloc+0x0/0x1a8) from [<c01a9d14>] (pl08x_fill_llis_for_desc+0x28/0x568) [<c01a9cec>] (pl08x_fill_llis_for_desc+0x0/0x568) from [<c01aab8c>] (pl08x_prep_slave_sg+0x258/0x3b0) [<c01aa934>] (pl08x_prep_slave_sg+0x0/0x3b0) from [<c01c9f74>] (pl011_dma_tx_refill+0x140/0x288) [<c01c9e34>] (pl011_dma_tx_refill+0x0/0x288) from [<c01ca748>] (pl011_start_tx+0xe4/0x120) [<c01ca664>] (pl011_start_tx+0x0/0x120) from [<c01c54a4>] (__uart_start+0x48/0x4c) [<c01c545c>] (__uart_start+0x0/0x4c) from [<c01c632c>] (uart_start+0x2c/0x3c) [<c01c6300>] (uart_start+0x0/0x3c) from [<c01c795c>] (uart_write+0xcc/0xf4) [<c01c7890>] (uart_write+0x0/0xf4) from [<c01b0384>] (n_tty_write+0x1c0/0x3e4) [<c01b01c4>] (n_tty_write+0x0/0x3e4) from [<c01acfe8>] (tty_write+0x144/0x240) [<c01acea4>] (tty_write+0x0/0x240) from [<c01ad17c>] (redirected_tty_write+0x98/0xac) [<c01ad0e4>] (redirected_tty_write+0x0/0xac) from [<c00c371c>] (vfs_write+0xbc/0x150) [<c00c3660>] (vfs_write+0x0/0x150) from [<c00c39c0>] (sys_write+0x4c/0x78) [<c00c3974>] (sys_write+0x0/0x78) from [<c0014460>] (ret_fast_syscall+0x0/0x3c) This happens because the DMA allocation code is not respecting atomic allocations correctly. GFP flags should not be tested for GFP_ATOMIC to determine if an atomic allocation is being requested. GFP_ATOMIC is not a flag but a value. The GFP bitmask flags are all prefixed with __GFP_. The rest of the kernel tests for __GFP_WAIT not being set to indicate an atomic allocation. We need to do the same. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-08ARM: realview: ensure that we have sufficient IRQs availableRussell King
Realview EB with a rev B MPcore tile results in lots of warnings at boot because it can't allocate enough IRQs. Fix this by increasing the number of available IRQs. WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:757 gic_init_bases+0x12c/0x2ec() Cannot allocate irq_descs @ IRQ96, assuming pre-allocated Modules linked in: Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002f5 r5:c042c62c r4:c044ff40 r3:c045f240 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029384>] (warn_slowpath_fmt+0x38/0x40) [<c002934c>] (warn_slowpath_fmt+0x0/0x40) from [<c042c62c>] (gic_init_bases+0x12c/0x2ec) [<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8) [<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24) [<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300) [<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070) ---[ end trace 1b75b31a2719ed1c ]--- ------------[ cut here ]------------ WARNING: at /home/rmk/git/linux-rmk/kernel/irq/irqdomain.c:234 irq_domain_add_legacy+0x80/0x140() Modules linked in: Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000000ea r5:c0081a38 r4:00000000 r3:c045f240 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c) [<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0081a38>] (irq_domain_add_legacy+0x80/0x140) [<c00819b8>] (irq_domain_add_legacy+0x0/0x140) from [<c042c64c>] (gic_init_bases+0x14c/0x2ec) [<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8) [<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24) [<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300) [<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070) ---[ end trace 1b75b31a2719ed1d ]--- ------------[ cut here ]------------ WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:762 gic_init_bases+0x170/0x2ec() Modules linked in: Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002fa r5:c042c670 r4:00000000 r3:c045f240 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c) [<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c042c670>] (gic_init_bases+0x170/0x2ec) [<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8) [<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24) [<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300) [<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070) ---[ end trace 1b75b31a2719ed1e ]--- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-08ARM: GIC: fix GIC cpumask initializationRussell King
Punit Agrawal reports: > I was trying to boot 3.8-rc5 on Realview EB 11MPCore using > realview-smp_defconfig as a starting point but the kernel failed to > progress past the log below (config attached). > > Pawel suggested I try reverting 384a290283f - "ARM: gic: use a private > mapping for CPU target interfaces" that you've authored. With this > commit reverted the kernel boots. > > I am not quite sure why the commit breaks 11MPCore but Pawel (cc'd) > might be able to shed light on that. Some early GIC implementations return zero for the first distributor CPU routing register. This means we can't rely on that telling us which CPU interface we're connected to. We know that these platforms implement PPIs for IRQs 29-31 - but we shouldn't assume that these will always be populated. So, instead, scan for a non-zero CPU routing register in the first 32 IRQs and use that as our CPU mask. Reported-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>