| Age | Commit message (Collapse) | Author |
|---|
|
BLKIO_STAT_CPU_SECTORS doesn't need read/write/sync/async subcounters
and is counted by blkio_group_stats_cpu->sectors; however, it still
holds a member in blkio_group_stats_cpu->stat_arr_cpu.
Rearrange stat_type_cpu and define BLKIO_STAT_CPU_ARR_NR and use it
for stat_arr_cpu[] size so that only SERVICE_BYTES and SERVICED have
subcounters.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
@pol to blkg_to_pdata() and @plid to blkg_lookup_create() are no
longer necessary. Drop them.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
In cfq, when we calculate a time slice for a process(or a cfqq to
be precise), we have to consider the cfq_target_latency so that all the
sync request have an estimated latency(300ms) and it is controlled by
cfq_target_latency. But in some hadoop test, we have found that if
there are many processes doing sequential read(24 for example), the
throughput is bad because every process can only work for about 25ms
and the cfqq is switched. That leads to a higher disk seek. We can
achive the good throughput by setting low_latency=0, but then some
read's latency is too much for the application.
So this patch makes cfq_target_latency tunable through sysfs so that
we can tune it and find some magic number which is not bad for both
the throughput and the read latency.
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
cgroup/for-3.5 contains the following changes which blk-cgroup needs
to proceed with the on-going cleanup.
* Dynamic addition and removal of cftypes to make config/stat file
handling modular for policies.
* cgroup removal update to not wait for css references to drain to fix
blkcg removal hang caused by cfq caching cfqgs.
Pull in cgroup/for-3.5 into block/for-3.5/core. This causes the
following conflicts in block/blk-cgroup.c.
* 761b3ef50e "cgroup: remove cgroup_subsys argument from callbacks"
conflicts with blkiocg_pre_destroy() addition and blkiocg_attach()
removal. Resolved by removing @subsys from all subsys methods.
* 676f7c8f84 "cgroup: relocate cftype and cgroup_subsys definitions in
controllers" conflicts with ->pre_destroy() and ->attach() updates
and removal of modular config. Resolved by dropping forward
declarations of the methods and applying updates to the relocated
blkio_subsys.
* 4baf6e3325 "cgroup: convert all non-memcg controllers to the new
cftype interface" builds upon the previous item. Resolved by adding
->base_cftypes to the relocated blkio_subsys.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Convert debug, freezer, cpuset, cpu_cgroup, cpuacct, net_prio, blkio,
net_cls and device controllers to use the new cftype based interface.
Termination entry is added to cftype arrays and populate callbacks are
replaced with cgroup_subsys->base_cftypes initializations.
This is functionally identical transformation. There shouldn't be any
visible behavior change.
memcg is rather special and will be converted separately.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Vivek Goyal <vgoyal@redhat.com>
|
|
blk-cgroup, netprio_cgroup, cls_cgroup and tcp_memcontrol
unnecessarily define cftype array and cgroup_subsys structures at the
top of the file, which is unconventional and necessiates forward
declaration of methods.
This patch relocates those below the definitions of the methods and
removes the forward declarations. Note that forward declaration of
tcp_files[] is added in tcp_memcontrol.c for tcp_init_cgroup(). This
will be removed soon by another patch.
This patch doesn't introduce any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
|
|
Instead of an ugly open coded variant.
Cc: axboe@kernel.dk
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Smatch complains that we re-enable IRQs twice. It looks like we forgot
to disable them here on the spin_trylock() failure path. This was added
in 9f13ef678e "blkcg: use double locking instead of RCU for blkg
synchronization".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>`
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When BLK_CGROUP is enabled but CFQ_GROUP_IOSCHED is, cfq ends up
calling blkg_get/put() on dummy cfqg leading to the following crash.
BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0
IP: [<ffffffff813d44d8>] cfq_init_queue+0x258/0x430
PGD 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
CPU 0
Modules linked in:
Pid: 1, comm: swapper/0 Not tainted 3.3.0-rc6-work+ #125 Bochs Bochs
RIP: 0010:[<ffffffff813d44d8>] [<ffffffff813d44d8>] cfq_init_queue+0x258/0x430
RSP: 0018:ffff88001f9dfd80 EFLAGS: 00010046
RAX: ffff88001aefbbf0 RBX: ffff88001aeedbf0 RCX: 0000000000000100
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff820ffd40
RBP: ffff88001f9dfdd0 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000009 R14: ffff88001aefbc30 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000000000b0 CR3: 000000000206f000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper/0 (pid: 1, threadinfo ffff88001f9de000, task ffff88001f9dc040)
Stack:
ffff88001aeedbf0 ffff88001aefbdb0 ffff88001aef1548 ffff88001aefbbf0
ffff88001f9dfdd0 ffff88001aef1548 ffffffff820d6320 ffffffff8165ce30
ffffffff82c555e0 ffff88001aeebbf0 ffff88001f9dfe00 ffffffff813b0507
Call Trace:
[<ffffffff813b0507>] elevator_init+0xd7/0x140
[<ffffffff813b83d5>] blk_init_allocated_queue+0x125/0x150
[<ffffffff813b94d3>] blk_init_queue_node+0x43/0x80
[<ffffffff813b9523>] blk_init_queue+0x13/0x20
[<ffffffff821aec00>] floppy_init+0x82/0xec7
[<ffffffff810001d2>] do_one_initcall+0x42/0x170
[<ffffffff821835fc>] kernel_init+0xcb/0x14f
[<ffffffff81b40b24>] kernel_thread_helper+0x4/0x10
Code: 00 e8 1d 9e 76 00 48 8b 43 48 48 85 c0 48 89 83 28 03 00 00 74 07 4c 8b a0 10 ff ff ff 8b 15 b0 2e d0 00 85 d2 0f 85 49 01 00 00 <41> 8b 84 24 b0 00 00 00 85 c0 0f 8e 8c 01 00 00 83 e8 01 85 c0
RIP [<ffffffff813d44d8>] cfq_init_queue+0x258/0x430
Because cfq's blkcg support has a on/off switch, CFQ_GROUP_IOSCHED,
separate from BLK_CGROUP, blkg access through cfqg needs to be
conditioned on it.
* Make blkg_to_cfqg() and cfqg_to_blkg() conditioned on
CFQ_GROUP_IOSCHED. If disabled, they always return %NULL.
* Introduce cfqg_get() and cfqg_put() conditioned on
CFQ_GROUP_IOSCHED. If disabled, they are noops.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We should use the GFP flags that the caller specified instead of picking
our own. All the callers specify GFP_KERNEL so this doesn't make a
difference to how the kernel runs, it's just a cleanup.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup changes from Tejun Heo:
"Out of the 8 commits, one fixes a long-standing locking issue around
tasklist walking and others are cleanups."
* 'for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Walk task list under tasklist_lock in cgroup_enable_task_cg_list
cgroup: Remove wrong comment on cgroup_enable_task_cg_list()
cgroup: remove cgroup_subsys argument from callbacks
cgroup: remove extra calls to find_existing_css_set
cgroup: replace tasklist_lock with rcu_read_lock
cgroup: simplify double-check locking in cgroup_attach_proc
cgroup: move struct cgroup_pidlist out from the header file
cgroup: remove cgroup_attach_task_current_cg()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes for v3.4 from Ingo Molnar
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
printk: Make it compile with !CONFIG_PRINTK
sched/x86: Fix overflow in cyc2ns_offset
sched: Fix nohz load accounting -- again!
sched: Update yield() docs
printk/sched: Introduce special printk_sched() for those awkward moments
sched/nohz: Correctly initialize 'next_balance' in 'nohz' idle balancer
sched: Cleanup cpu_active madness
sched: Fix load-balance wreckage
sched: Clean up parameter passing of proc_sched_autogroup_set_nice()
sched: Ditch per cgroup task lists for load-balancing
sched: Rename load-balancing fields
sched: Move load-balancing arguments into helper struct
sched/rt: Do not submit new work when PI-blocked
sched/rt: Prevent idle task boosting
sched/wait: Add __wake_up_all_locked() API
sched/rt: Document scheduler related skip-resched-check sites
sched/rt: Use schedule_preempt_disabled()
sched/rt: Add schedule_preempt_disabled()
sched/rt: Do not throttle when PI boosting
sched/rt: Keep period timer ticking when rt throttling is active
...
|
|
After the previous patch to cfq, there's no ioc_get_changed() user
left. This patch yanks out ioc_{ioprio|cgroup|get}_changed() and all
related stuff.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
cfq caches the associated cfqq's for a given cic. The cache needs to
be flushed if the cic's ioprio or blkcg has changed. It is currently
done by requiring the changing action to set the respective
ICQ_*_CHANGED bit in the icq and testing it from cfq_set_request(),
which involves iterating through all the affected icqs.
All cfq wants to know is whether ioprio and/or blkcg have changed
since the last flush and can be easily achieved by just remembering
the current ioprio and blkcg ID in cic.
This patch adds cic->{ioprio|blkcg_id}, updates all ioprio users to
use the remembered value instead, and updates cfq_set_request() path
such that, instead of using icq_get_changed(), the current values are
compared against the remembered ones and trigger appropriate flush
action if not. Condition tests are moved inside both _changed
functions which are now named check_ioprio_changed() and
check_blkcg_changed().
ioprio.h::task_ioprio*() can't be used anymore and replaced with
open-coded IOPRIO_CLASS_NONE case in cfq_async_queue_prio().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that io_cq is managed by block core and guaranteed to exist for
any in-flight request, it is easier and carries more information to
pass around cfq_io_cq than io_context.
This patch updates cfq_init_prio_data(), cfq_find_alloc_queue() and
cfq_get_queue() to take @cic instead of @ioc. This change removes a
duplicate cfq_cic_lookup() from cfq_find_alloc_queue().
This change enables the use of cic-cached ioprio in the next patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add 64bit unique id to blkcg. This will be used by policies which
want blkcg identity test to tell whether the associated blkcg has
changed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With recent plug merge updates, all non-percpu stat updates happen
under queue_lock making stats_lock unnecessary to synchronize stat
updates. The only synchronization necessary is stat reading, which
can be done using u64_stats_sync instead.
This patch removes blkio_group->stats_lock and adds
blkio_group_stats->syncp for reader synchronization.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Restructure blkio_get_stat() to prepare for removal of stats_lock.
* Define BLKIO_STAT_ARR_NR explicitly to denote which stats have
subtypes instead of using BLKIO_STAT_QUEUED.
* Separate out stat acquisition and printing. After this, there are
only two users of blkio_fill_stat(). Just open code it.
* The code was mixing MAX_KEY_LEN and MAX_KEY_LEN - 1. There's no
need to subtract one. Use MAX_KEY_LEN consistently.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkiocg_reset_stats() implements stat reset for blkio.reset_stats
cgroupfs file. This feature is very unconventional and something
which shouldn't have been merged. It's only useful when there's only
one user or tool looking at the stats. As soon as multiple users
and/or tools are involved, it becomes useless as resetting disrupts
other usages. There are very good reasons why all other stats expect
readers to read values at the start and end of a period and subtract
to determine delta over the period.
The implementation is rather complex - some fields shouldn't be
cleared and it saves some fields, resets whole and restores for some
reason. Reset of percpu stats is also racy. The comment points to
64bit store atomicity for the reason but even without that stores for
zero can simply race with other CPUs doing RMW and get clobbered.
Simplify reset by
* Clear selectively instead of resetting and restoring.
* Grouping debug stat fields to be reset and using memset() over them.
* Not caring about stats_lock.
* Using memset() to reset percpu stats.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With recent plug merge updates, merged stats are no longer called for
plug merges and now only updated while holding queue_lock. As
stats_lock is scheduled to be removed, there's no reason to use percpu
for merged stats. Don't use percpu for merged stats.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Current per cpu stat allocation assumes GFP_KERNEL allocation flag. But in
IO path there are times when we want GFP_NOIO semantics. As there is no
way to pass the allocation flags to alloc_percpu(), this patch delays the
allocation of stats using a worker thread.
v2-> tejun suggested following changes. Changed the patch accordingly.
- move alloc_node location in structure
- reduce the size of names of some of the fields
- Reduce the scope of locking of alloc_list_lock
- Simplified stat_alloc_fn() by allocating stats for all
policies in one go and then assigning these to a group.
v3 -> Andrew suggested to put some comments in the code. Also raised
concerns about trying to allocate infinitely in case of allocation
failure. I have changed the logic to sleep for 10ms before retrying.
That should take care of non-preemptible UP kernels.
v4 -> Tejun had more suggestions.
- drop list_for_each_entry_all()
- instead of msleep() use queue_delayed_work()
- Some cleanups realted to more compact coding.
v5-> tejun suggested more cleanups leading to more compact code.
tj: - Relocated pcpu_stats into blkio_stat_alloc_fn().
- Minor comment update.
- This also fixes suspicious RCU usage warning caused by invoking
cgroup_path() from blkg_alloc() without holding RCU read lock.
Now that blkg_alloc() doesn't require sleepable context, RCU
read lock from blkg_lookup_create() is maintained throughout
blkg_alloc().
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
"Been sitting on this for a while, but lets get this out the door.
This fixes various important bugs for 3.3 final, along with a few more
trivial ones. Please pull!"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: fix ioc leak in put_io_context
block, sx8: fix pointer math issue getting fw version
Block: use a freezable workqueue for disk-event polling
drivers/block/DAC960: fix -Wuninitialized warning
drivers/block/DAC960: fix DAC960_V2_IOCTL_Opcode_T -Wenum-compare warning
block: fix __blkdev_get and add_disk race condition
block: Fix setting bio flags in drivers (sd_dif/floppy)
block: Fix NULL pointer dereference in sd_revalidate_disk
block: exit_io_context() should call elevator_exit_icq_fn()
block: simplify ioc_release_fn()
block: replace icq->changed with icq->flags
|
|
When put_io_context is called, if ioc->icq_list is empty and refcount
is 1, kernel will not free the ioc.
This is caught by following kmemleak:
unreferenced object 0xffff880036349fe0 (size 216):
comm "sh", pid 2137, jiffies 4294931140 (age 290579.412s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
01 00 01 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
backtrace:
[<ffffffff8169f926>] kmemleak_alloc+0x26/0x50
[<ffffffff81195a9c>] kmem_cache_alloc_node+0x1cc/0x2a0
[<ffffffff81356b67>] create_io_context_slowpath+0x27/0x130
[<ffffffff81356d2b>] get_task_io_context+0xbb/0xf0
[<ffffffff81055f0e>] copy_process+0x188e/0x18b0
[<ffffffff8105609b>] do_fork+0x11b/0x420
[<ffffffff810247f8>] sys_clone+0x28/0x30
[<ffffffff816d3373>] stub_clone+0x13/0x20
[<ffffffffffffffff>] 0xffffffffffffffff
ioc should be freed if ioc->icq_list is empty.
Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make blk-throttle call bio_associate_current() on bios being delayed
such that they get issued to block layer with the original io_context.
This allows stacking blk-throttle and cfq-iosched propio policies.
bios will always be issued with the correct ioc and blkcg whether it
gets delayed by blk-throttle or not.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Implement bio_blkio_cgroup() which returns the blkcg associated with
the bio if exists or %current's blkcg, and use it in blk-throttle and
cfq-iosched propio. This makes both cgroup policies honor task
association for the bio instead of always assuming %current.
As nobody is using bio_set_task() yet, this doesn't introduce any
behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
IO scheduling and cgroup are tied to the issuing task via io_context
and cgroup of %current. Unfortunately, there are cases where IOs need
to be routed via a different task which makes scheduling and cgroup
limit enforcement applied completely incorrectly.
For example, all bios delayed by blk-throttle end up being issued by a
delayed work item and get assigned the io_context of the worker task
which happens to serve the work item and dumped to the default block
cgroup. This is double confusing as bios which aren't delayed end up
in the correct cgroup and makes using blk-throttle and cfq propio
together impossible.
Any code which punts IO issuing to another task is affected which is
getting more and more common (e.g. btrfs). As both io_context and
cgroup are firmly tied to task including userland visible APIs to
manipulate them, it makes a lot of sense to match up tasks to bios.
This patch implements bio_associate_current() which associates the
specified bio with %current. The bio will record the associated ioc
and blkcg at that point and block layer will use the recorded ones
regardless of which task actually ends up issuing the bio. bio
release puts the associated ioc and blkcg.
It grabs and remembers ioc and blkcg instead of the task itself
because task may already be dead by the time the bio is issued making
ioc and blkcg inaccessible and those are all block layer cares about.
elevator_set_req_fn() is updated such that the bio elvdata is being
allocated for is available to the elevator.
This doesn't update block cgroup policies yet. Further patches will
implement the support.
-v2: #ifdef CONFIG_BLK_CGROUP added around bio->bi_ioc dereference in
rq_ioc() to fix build breakage.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Kent Overstreet <koverstreet@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently ioc->nr_tasks is used to decide two things - whether an ioc
is done issuing IOs and whether it's shared by multiple tasks. This
patch separate out the first into ioc->active_ref, which is acquired
and released using {get|put}_io_context_active() respectively.
This will be used to associate bio's with a given task. This patch
doesn't introduce any visible behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make the following interface updates to prepare for future ioc related
changes.
* create_io_context() returning ioc only works for %current because it
doesn't increment ref on the ioc. Drop @task parameter from it and
always assume %current.
* Make create_io_context_slowpath() return 0 or -errno and rename it
to create_task_io_context().
* Make ioc_create_icq() take @ioc as parameter instead of assuming
that of %current. The caller, get_request(), is updated to create
ioc explicitly and then pass it into ioc_create_icq().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
get_request() is structured a bit unusually in that failure path is
inlined in the usual flow with goto labels atop and inside it.
Relocate the error path to the end of the function.
This is to prepare for icq handling changes in get_request() and
doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that blkg additions / removals are always done under both q and
blkcg locks, the only places RCU locking is necessary are
blkg_lookup[_create]() for lookup w/o blkcg lock. This patch drops
unncessary RCU locking replacing it with plain blkcg locking as
necessary.
* blkiocg_pre_destroy() already perform proper locking and don't need
RCU. Dropped.
* blkio_read_blkg_stats() now uses blkcg->lock instead of RCU read
lock. This isn't a hot path.
* Now unnecessary synchronize_rcu() from queue exit paths removed.
This makes q->nr_blkgs unnecessary. Dropped.
* RCU annotation on blkg->q removed.
-v2: Vivek pointed out that blkg_lookup_create() still needs to be
called under rcu_read_lock(). Updated.
-v3: After the update, stats_lock locking in blkio_read_blkg_stats()
shouldn't be using _irq variant as it otherwise ends up enabling
irq while blkcg->lock is locked. Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkgs are chained from both blkcgs and request_queues and thus
subjected to two locks - blkcg->lock and q->queue_lock. As both blkcg
and q can go away anytime, locking during removal is tricky. It's
currently solved by wrapping removal inside RCU, which makes the
synchronization complex. There are three locks to worry about - the
outer RCU, q lock and blkcg lock, and it leads to nasty subtle
complications like conditional synchronize_rcu() on queue exit paths.
For all other paths, blkcg lock is naturally nested inside q lock and
the only exception is blkcg removal path, which is a very cold path
and can be implemented as clumsy but conceptually-simple reverse
double lock dancing.
This patch updates blkg removal path such that blkgs are removed while
holding both q and blkcg locks, which is trivial for request queue
exit path - blkg_destroy_all(). The blkcg removal path,
blkiocg_pre_destroy(), implements reverse double lock dancing
essentially identical to ioc_release_fn().
This simplifies blkg locking - no half-dead blkgs to worry about. Now
unnecessary RCU annotations will be removed by the next patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, blkg is per cgroup-queue-policy combination. This is
unnatural and leads to various convolutions in partially used
duplicate fields in blkg, config / stat access, and general management
of blkgs.
This patch make blkg's per cgroup-queue and let them serve all
policies. blkgs are now created and destroyed by blkcg core proper.
This will allow further consolidation of common management logic into
blkcg core and API with better defined semantics and layering.
As a transitional step to untangle blkg management, elvswitch and
policy [de]registration, all blkgs except the root blkg are being shot
down during elvswitch and bypass. This patch adds blkg_root_update()
to update root blkg in place on policy change. This is hacky and racy
but should be good enough as interim step until we get locking
simplified and switch over to proper in-place update for all blkgs.
-v2: Root blkgs need to be updated on elvswitch too and blkg_alloc()
comment wasn't updated according to the function change. Fixed.
Both pointed out by Vivek.
-v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for
all policies. This freed root pd during elvswitch before the
last queue finished exiting and led to oops. Directly invoke
update_root_blkg_pd() only on BLKIO_POLICY_PROP from
cfq_exit_queue(). This also is closer to what will be done with
proper in-place blkg update. Reported by Vivek.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With the previous patch to move blkg list heads and counters to
request_queue and blkg, logic to manage them in both policies are
almost identical and can be moved to blkcg core.
This patch moves blkg link logic into blkg_lookup_create(), implements
common blkg unlink code in blkg_destroy(), and updates
blkg_destory_all() so that it's policy specific and can skip root
group. The updated blkg_destroy_all() is now used to both clear queue
for bypassing and elv switching, and release all blkgs on q exit.
This patch introduces a race window where policy [de]registration may
race against queue blkg clearing. This can only be a problem on cfq
unload and shouldn't be a real problem in practice (and we have many
other places where this race already exists). Future patches will
remove these unlikely races.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, specific policy implementations are responsible for
maintaining list and number of blkgs. This duplicates code
unnecessarily, and hinders factoring common code and providing blkcg
API with better defined semantics.
After this patch, request_queue hosts list heads and counters and blkg
has list nodes for both policies. This patch only relocates the
necessary fields and the next patch will actually move management code
into blkcg core.
Note that request_queue->blkg_list[] and ->nr_blkgs[] are hardcoded to
have 2 elements. This is to avoid include dependency and will be
removed by the next patch.
This patch doesn't introduce any behavior change.
-v2: Now unnecessary conditional on CONFIG_BLK_CGROUP_MODULE removed
as pointed out by Vivek.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkg is scheduled to be unified for all policies and thus there won't
be one-to-one mapping from blkg to policy. Update stat related
functions to take explicit @pol or @plid arguments and not use
blkg->plid.
This is painful for now but most of specific stat interface functions
will be replaced with a handful of generic helpers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To prepare for unifying blkgs for different policies, make blkg->pd an
array with BLKIO_NR_POLICIES elements and move blkg->conf, ->stats,
and ->stats_cpu into blkg_policy_data.
This patch doesn't introduce any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, blkcg policy implementations manage blkg refcnt duplicating
mostly identical code in both policies. This patch moves refcnt to
blkg and let blkcg core handle refcnt and freeing of blkgs.
* cfq blkgs now also get freed via RCU.
* cfq blkgs lose RB_EMPTY_ROOT() sanity check on blkg free. If
necessary, we can add blkio_exit_group_fn() to resurrect this.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, blkg's are embedded in private data blkcg policy private
data structure and thus allocated and freed by policies. This leads
to duplicate codes in policies, hinders implementing common part in
blkcg core with strong semantics, and forces duplicate blkg's for the
same cgroup-q association.
This patch introduces struct blkg_policy_data which is a separate data
structure chained from blkg. Policies specifies the amount of private
data it needs in its blkio_policy_type->pdata_size and blkcg core
takes care of allocating them along with blkg which can be accessed
using blkg_to_pdata(). blkg can be determined from pdata using
pdata_to_blkg(). blkio_alloc_group_fn() method is accordingly updated
to blkio_init_group_fn().
For consistency, tg_of_blkg() and cfqg_of_blkg() are replaced with
blkg_to_tg() and blkg_to_cfqg() respectively, and functions to map in
the reverse direction are added.
Except that policy specific data now lives in a separate data
structure from blkg, this patch doesn't introduce any functional
difference.
This will be used to unify blkg's for different policies.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Keep track of all request_queues which have blkcg initialized and turn
on bypass and invoke blkcg_clear_queue() on all before making changes
to blkcg policies.
This is to prepare for moving blkg management into blkcg core. Note
that this uses more brute force than necessary. Finer grained shoot
down will be implemented later and given that policy [un]registration
almost never happens on running systems (blk-throtl can't be built as
a module and cfq usually is the builtin default iosched), this
shouldn't be a problem for the time being.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently block core calls directly into blk-throttle for init, drain
and exit. This patch adds blkcg_{init|drain|exit}_queue() which wraps
the blk-throttle functions. This is to give more control and
visiblity to blkcg core layer for proper layering. Further patches
will add logic common to blkcg policies to the functions.
While at it, collapse blk_throtl_release() into blk_throtl_exit().
There's no reason to keep them separate.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, blkg points to the associated blkcg via its css_id. This
unnecessarily complicates dereferencing blkcg. Let blkg hold a
reference to the associated blkcg and point directly to it and disable
css_id on blkio_subsys.
This change requires splitting blkiocg_destroy() into
blkiocg_pre_destroy() and blkiocg_destroy() so that all blkg's can be
destroyed and all the blkcg references held by them dropped during
cgroup removal.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk-cgroup printing code currently assumes that there is a device/disk
associated with every queue in the system, but modules like floppy,
can instantiate request queues without registering disk which can lead
to oops.
Skip the queue/blkg which don't have dev/disk associated with them.
-tj: Factored out backing_dev_info check into blkg_dev_name().
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkg->dev is dev_t recording the device number of the block device for
the associated request_queue. It is used to identify the associated
block device when printing out configuration or stats.
This is redundant to begin with. A blkg is an association between a
cgroup and a request_queue and it of course is possible to reach
request_queue from blkg and synchronization conventions are in place
for safe q dereferencing, so this shouldn't be necessary from the
beginning. Furthermore, it's initialized by sscanf()ing the device
name of backing_dev_info. The mind boggles.
Anyways, if blkg is visible under rcu lock, we *know* that the
associated request_queue hasn't gone away yet and its bdi is
registered and alive - blkg can't be created for request_queue which
hasn't been fully initialized and it can't go away before blkg is
removed.
Let stat and conf read functions get device name from
blkg->q->backing_dev_info.dev and pass it down to printing functions
and remove blkg->dev.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that blkcg configuration lives in blkg's, blkio_policy_node is no
longer necessary. Kill it.
blkio_policy_parse_and_set() now fails if invoked for missing device
and functions to print out configurations are updated to print from
blkg's.
cftype_blkg_same_policy() is dropped along with other policy functions
for consistency. Its one line is open coded in the only user -
blkio_read_blkg_stats().
-v2: Update to reflect the retry-on-bypass logic change of the
previous patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkcg is very peculiar in that it allows setting and remembering
configurations for non-existent devices by maintaining separate data
structures for configuration.
This behavior is completely out of the usual norms and outright
confusing; furthermore, it uses dev_t number to match the
configuration to devices, which is unpredictable to begin with and
becomes completely unuseable if EXT_DEVT is fully used.
It is wholely unnecessary - we already have fully functional userland
mechanism to program devices being hotplugged which has full access to
device identification, connection topology and filesystem information.
Add a new struct blkio_group_conf which contains all blkcg
configurations to blkio_group and let blkio_group, which can be
created iff the associated device exists and is removed when the
associated device goes away, carry all configurations.
Note that, after this patch, all newly created blkg's will always have
the default configuration (unlimited for throttling and blkcg's weight
for propio).
This patch makes blkio_policy_node meaningless but doesn't remove it.
The next patch will.
-v2: Updated to retry after short sleep if blkg lookup/creation failed
due to the queue being temporarily bypassed as indicated by
-EBUSY return. Pointed out by Vivek.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently both blk-throttle and cfq-iosched implement their own
blkio_group creation code in throtl_get_tg() and cfq_get_cfqg(). This
patch factors out the common code into blkg_lookup_create(), which
returns ERR_PTR value so that transitional failures due to queue
bypass can be distinguished from other failures.
* New plkio_policy_ops methods blkio_alloc_group_fn() and
blkio_link_group_fn added. Both are transitional and will be
removed once the blkg management code is fully moved into
blk-cgroup.c.
* blkio_alloc_group_fn() allocates policy-specific blkg which is
usually a larger data structure with blkg as the first entry and
intiailizes it. Note that initialization of blkg proper, including
percpu stats, is responsibility of blk-cgroup proper.
Note that default config (weight, bps...) initialization is done
from this method; otherwise, we end up violating locking order
between blkcg and q locks via blkcg_get_CONF() functions.
* blkio_link_group_fn() is called under queue_lock and responsible for
linking the blkg to the queue. blkcg side is handled by blk-cgroup
proper.
* The common blkg creation function is named blkg_lookup_create() and
blkiocg_lookup_group() is renamed to blkg_lookup() for consistency.
Also, throtl / cfq related functions are similarly [re]named for
consistency.
This simplifies blkcg policy implementations and enables further
cleanup.
-v2: Vivek noticed that blkg_lookup_create() incorrectly tested
blk_queue_dead() instead of blk_queue_bypass() leading a user of
the function ending up creating a new blkg on bypassing queue.
This is a bug introduced while relocating bypass patches before
this one. Fixed.
-v3: ERR_PTR patch folded into this one. @for_root added to
blkg_lookup_create() to allow creating root group on a bypassed
queue during elevator switch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For root blkg, blk_throtl_init() was using throtl_alloc_tg()
explicitly and cfq_init_queue() was manually initializing embedded
cfqd->root_group, adding unnecessarily different code paths to blkg
handling.
Make both use the usual blkio_group get functions - throtl_get_tg()
and cfq_get_cfqg() - for the root blkio_group too. Note that
blk_throtl_init() callsite is pushed downwards in
blk_alloc_queue_node() so that @q is sufficiently initialized for
throtl_get_tg().
This simplifies root blkg handling noticeably for cfq and will allow
further modularization of blkcg API.
-v2: Vivek pointed out that using cfq_get_cfqg() won't work if
CONFIG_CFQ_GROUP_IOSCHED is disabled. Fix it by factoring out
initialization of base part of cfqg into cfq_init_cfqg_base() and
alloc/init/free explicitly if !CONFIG_CFQ_GROUP_IOSCHED.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Block cgroup policies are maintained in a linked list and,
theoretically, multiple policies sharing the same policy ID are
allowed.
This patch temporarily restricts one policy per plid and adds
blkio_policy[] array which indexes registered policy types by plid.
Both the restriction and blkio_policy[] array are transitional and
will be removed once API cleanup is complete.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkgio_group is association between a block cgroup and a queue for a
given policy. Using opaque void * for association makes things
confusing and hinders factoring of common code. Use request_queue *
and, if necessary, policy id instead.
This will help block cgroup API cleanup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In both blkg get functions - throtl_get_tg() and cfq_get_cfqg(),
instead of obtaining blkcg of %current explicitly, let the caller
specify the blkcg to use as parameter and make both functions hold on
to the blkcg.
This is part of block cgroup interface cleanup and will help making
blkcg API more modular.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
