summaryrefslogtreecommitdiff
path: root/drivers/acpi/pci_irq.c
AgeCommit message (Collapse)Author
2012-01-06PCI/PM/Runtime: make PCI traces quieterVincent Palatin
When the runtime PM is activated on PCI, if a device switches state frequently (e.g. an EHCI controller with autosuspending USB devices connected) the PCI configuration traces might be very verbose in the kernel log. Let's guard those traces with DEBUG condition. Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-16ACPI: fix CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQSStefan Assmann
The following was observed by Steve Rostedt on 3.0.0-rc5 Backtrace: irq 16: nobody cared (try booting with the "irqpoll" option) Pid: 65, comm: irq/16-uhci_hcd Not tainted 3.0.0-rc5-test+ #94 Call Trace: [<ffffffff810aa643>] __report_bad_irq+0x37/0xc1 [<ffffffff810aaa2d>] note_interrupt+0x14e/0x1c9 [<ffffffff810a9a05>] ? irq_thread_fn+0x3c/0x3c [<ffffffff810a990e>] irq_thread+0xf6/0x1b1 [<ffffffff810a9818>] ? irq_finalize_oneshot+0xb3/0xb3 [<ffffffff8106b4d6>] kthread+0x9f/0xa7 [<ffffffff814f1f04>] kernel_thread_helper+0x4/0x10 [<ffffffff8103ca09>] ? finish_task_switch+0x7b/0xc0 [<ffffffff814eac78>] ? retint_restore_args+0x13/0x13 [<ffffffff8106b437>] ? __init_kthread_worker+0x5a/0x5a [<ffffffff814f1f00>] ? gs_change+0x13/0x13 handlers: [<ffffffff810a912d>] irq_default_primary_handler threaded [<ffffffff8135eaa6>] usb_hcd_irq [<ffffffff810a912d>] irq_default_primary_handler threaded [<ffffffff8135eaa6>] usb_hcd_irq Disabling IRQ #16 The problem being that a device triggers boot interrupts (due to threaded interrupt handling and masking of the IO-APIC), which are forwarded to the PIRQ line of the device. These interrupts are not handled on the PIRQ line because the interrupt handler is not present there. This should have already been fixed by CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS. However some parts of the quirk got lost in the ACPI merge. This is a resent of the patch proposed in 2009. See http://lkml.org/lkml/2009/9/7/192 Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-16ACPI: remove unused declaration of proc_fs.hZhang Rui
Remove unused declaration of proc_fs.h. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-04x86, acpi/irq: pci device dev->irq is an isa irq not a gsiEric W. Biederman
Strictly speaking on x86 (where acpi is used) dev->irq must be a dual i8259 irq input aka an isa irq. Therefore we should translate that isa irq into a gsi before passing it to a function that takes a gsi. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> LKML-Reference: <1269936436-7039-3-git-send-email-ebiederm@xmission.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-08-28ACPI: Move definition of PREFIX from acpi_bus.h to internal..hLen Brown
Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-24Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', ↵Len Brown
'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release
2009-06-18ACPI: simplify acpi_pci_irq_del_prt() APIAlexander Chiang
There is no need to pass a segment/bus tuple to this API, as the callsite always has a struct pci_bus. We can derive segment/bus from the struct pci_bus, so let's take this opportunit to simplify the API and make life easier for the callers. Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18ACPI: simplify acpi_pci_irq_add_prt() APIAlexander Chiang
A PCI domain cannot change as you descend down subordinate buses, which makes the 'segment' argument to acpi_pci_irq_add_prt() useless. Change the interface to take a struct pci_bus *, from whence we can derive the bus number and segment. Reducing the number of arguments makes life simpler for callers. Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-28irq: change ACPI GSI APIs to also take a device argumentYinghai Lu
We want to use dev_to_node() later on, to be aware of the 'home node' of the GSI in question. [ Impact: cleanup, prepare the IRQ code to be more NUMA aware ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Len Brown <lenb@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-acpi@vger.kernel.org Cc: linux-ia64@vger.kernel.org LKML-Reference: <49F65560.20904@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-05Merge branch 'misc' into releaseLen Brown
2009-04-04ACPI: constify tables in pci_irq.cJan Beulich
Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-17ACPI: PCI: use generic pci_swizzle_interrupt_pin()Bjorn Helgaas
Use the generic pci_swizzle_interrupt_pin() instead of ACPI-specific code. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: add HP copyrightBjorn Helgaas
Add HP copyright to pci_irq.c. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: whitespace and useless initialization cleanupBjorn Helgaas
This patch makes function declarations consistent throughout the file and removes some unnecessary initializations. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: expand acpi_pci_allocate_irq() and acpi_pci_free_irq() inlineBjorn Helgaas
acpi_pci_allocate_irq() and acpi_pci_free_irq() are trivial and only used once, so just open-code them. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: simplify struct acpi_prt_entryBjorn Helgaas
Remove unused "irq" field, remove unnecessary struct, rename "handle" to "link". Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: simplify list of _PRT entriesBjorn Helgaas
We don't need a struct containing a count and a list_head; a simple list_head is sufficient. The list iterators handle empty lists fine. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: combine lookup and deriveBjorn Helgaas
This folds acpi_pci_irq_derive() into acpi_pci_irq_lookup() so it can be easily used by both acpi_pci_irq_enable() and acpi_pci_irq_disable(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: follow typical PCI INTx swizzling patternBjorn Helgaas
No functional change; this just uses the typical pattern of PCI INTx swizzling done on other architectures. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: use positive logic to simplify codeBjorn Helgaas
This doesn't change anything functionally; it just changes tests so we test for success instead of failure. This makes the code read more easily and allows us to remove the "!entry" in the while loop condition. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: remove callback from acpi_pci_irq_lookup & acpi_pci_irq_deriveBjorn Helgaas
We currently pass a callback function (either acpi_pci_allocate_irq() or acpi_pci_free_irq()) to acpi_pci_irq_lookup() and acpi_pci_irq_derive(). I think it's simpler to remove the callback and just have the enable/ disable functions make the calls directly. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: tweak _PRT lookup debugBjorn Helgaas
Print one message (either "found" or "not found") for every _PRT search. And add pin information to the INTx swizzling debug. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: lookup _PRT entry by PCI dev and pin, not segment/bus/dev/pinBjorn Helgaas
There's no reason to pass around segment, bus, and device independently when we can just pass the pci_dev pointer, which carries all those already. The pci_dev contains an interrupt pin, too, but we still have to pass both the pci_dev and the pin because when we use a bridge to derive an IRQ, we need the pin from the downstream device, not the bridge. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: use 1-based encoding for _PRT quirksBjorn Helgaas
Use the PCI INTx pin encoding (1=INTA, 2=INTB, etc) for _PRT quirks. Then we can simply compare "entry->pin == quirk->pin". Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: always use the PCI INTx pin values, not the _PRT onesBjorn Helgaas
This patch changes pci_irq.c to always use PCI INTx pin encodings instead of a mix of PCI and _PRT encodings. The PCI INTx pin numbers from the PCI_INTERRUPT_PIN config register are 0=device doesn't use interrupts, 1=INTA, ..., 4=INTD. But the _PRT table uses 0=INTA, ..., 3=INTD. This patch converts the _PRT encoding to the PCI encoding immediately when we add a _PRT entry to the global list. All the rest of the code can then use the PCI encoding consistently. The point of this is to make the interrupt swizzling look the same as on other architectures, so someday we can unify them. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: add a helper to convert _PRT INTx pin number to nameBjorn Helgaas
This adds a helper function to convert INTx pin numbers from the _PRT (0, 1, 2, 3) to the pin name ('A', 'B', 'C', 'D'). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: move struct acpi_prt_entry declaration out of public header fileBjorn Helgaas
The struct acpi_prt_entry is used only in pci_irq.c, so there's no need for the declaration to be public. This patch moves it into pci_irq.c. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: fix GSI/IRQ naming confusionBjorn Helgaas
The interrupt numbers from _PRT entries are GSIs, not Linux IRQs. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: ignore _PRT function informationBjorn Helgaas
_PRT entries don't contain any useful PCI function information (the function part of the PCI address is supposed to be 0xffff), and we don't ever look at it, so this patch just removes the reference to it. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: simplify buffer management for evaluating _PRTBjorn Helgaas
Previously, acpi_pci_irq_add_prt() did all its own buffer management. But now that we have ACPI_ALLOCATE_BUFFER, we no longer need to do that management. And we don't have to call acpi_get_irq_routing_table() twice (once to learn the size of the buffer needed, and again to actually get the table). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: remove unnecessary null pointer checksBjorn Helgaas
Better to oops and learn about a bug than to silently cover it up. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: PCI: use conventional PCI address formatBjorn Helgaas
Use the conventional format for PCI addresses (%04x:%02x:%02x.%d). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16ACPI: use dev_printk when possibleBjorn Helgaas
Convert printks to use dev_printk(). The most obvious change will be messages like this: -ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 31 (level, low) -> IRQ 31 +cciss 0000:00:04.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-03-25ACPI: fix Medion _PRT quirk (use "ISA_", not "ISA")Bjorn Helgaas
This fixes the builtin RTL8139 NIC on the Medion MD9580-F laptop. The BIOS reports the interrupt routing incorrectly. I recently added a quirk to work around this, and this patch fixes a typo in the quirk. We pad every ACPI pathname component to four characters, so ".ISA." will never match anything. We need ".ISA_." instead. Thank you Johann-Nikolaus Andreae <johann-nikolaus.andreae@nacs.de> for patiently testing this patch. See http://bugzilla.kernel.org/show_bug.cgi?id=4773 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-12ACPI: add _PRT quirks to work around broken firmwareBjorn Helgaas
This patch works around incorrect _PRT (PCI interrupt routing) information from firmware. This does not fix any regressions and can wait for the next kernel release. On the Medion MD9580-F laptop, the BIOS says the builtin RTL8139 NIC interrupt at 00:09.0[A] is connected to \_SB.PCI0.ISA.LNKA, but it's really connected to \_SB.PCI0.ISA.LNKB. Before this patch, the workaround was to use "pci=routeirq". More details at http://bugzilla.kernel.org/show_bug.cgi?id=4773. On the Dell OptiPlex GX1, the BIOS says the PCI slot interrupt 00:0d[A] is connected to LNKB, but it's really connected to LNKA. Before this patch, the workaround was to use "pci=routeirq". Pierre Ossman tested a previous version of this patch and confirmed that it fixed the problem. More details at http://bugzilla.kernel.org/show_bug.cgi?id=5044. On the HP t5710 thin client, the BIOS says the builtin Radeon video interrupt at 01:00[A] is connected to LNK1, but it's really connected to LNK3. The previous workaround was to use a custom DSDT. I tested this patch and verified that it fixes the problem. More details at http://bugzilla.kernel.org/show_bug.cgi?id=10138. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07Merge branches 'release' and 'fluff' into releaseLen Brown
Conflicts: drivers/acpi/scan.c include/linux/acpi.h Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07ACPI: misc cleanupsAdrian Bunk
This patch contains the following possible cleanups: - make the following needlessly global code static: - drivers/acpi/bay.c:dev_attr_eject - drivers/acpi/bay.c:dev_attr_present - drivers/acpi/dock.c:dev_attr_docked - drivers/acpi/dock.c:dev_attr_flags - drivers/acpi/dock.c:dev_attr_uid - drivers/acpi/dock.c:dev_attr_undock - drivers/acpi/pci_bind.c:acpi_pci_unbind() - drivers/acpi/pci_link.c:acpi_link_lock - drivers/acpi/sbs.c:acpi_sbs_callback() - drivers/acpi/sbshc.c:acpi_smbus_transaction() - drivers/acpi/sleep/main.c:acpi_sleep_prepare() - #if 0 the following unused global functions: - drivers/acpi/numa.c:acpi_unmap_pxm_to_node() - remove the following unused EXPORT_SYMBOL's: - acpi_register_gsi - acpi_unregister_gsi - acpi_strict - acpi_bus_receive_event - register_acpi_bus_type - unregister_acpi_bus_type - acpi_os_printf - acpi_os_sleep - acpi_os_stall - acpi_os_read_pci_configuration - acpi_os_create_semaphore - acpi_os_delete_semaphore - acpi_os_wait_semaphore - acpi_os_signal_semaphore - acpi_os_signal - acpi_pci_irq_enable - acpi_get_pxm Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07ACPI: acpi_pci_irq_find_prt_entry(): use list_for_each_entry() instead of ↵Matthias Kaehlcke
list_for_each() Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-11ACPI : Not register gsi for PCI IDE controller in legacy modeAlan Cox
When PCI IDE controller works in legacy mode and no PRT entry is found in ACPI PRT table, OSPM will neither read the irq number from the IDE PCI configuration space nor call the function of acpi_register_gsi to register gsi. http://bugzilla.kernel.org/show_bug.cgi?id=5637 Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-13ACPI: clean up ACPI_MODULE_NAME() useLen Brown
cosmetic only Make "module name" actually match the file name. Invoke with ';' as leaving it off confuses Lindent and gcc doesn't care. Fix indentation where Lindent did get confused. Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-20ACPI: replace kmalloc+memset with kzallocBurman Yan
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: Remove unnecessary from/to-void* and to-void casts in drivers/acpiJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Remove obsolete #include <linux/config.h> remove obsolete swsusp_encrypt arch/arm26/Kconfig typos Documentation/IPMI typos Kconfig: Typos in net/sched/Kconfig v9fs: do not include linux/version.h Documentation/DocBook/mtdnand.tmpl: typo fixes typo fixes: specfic -> specific typo fixes in Documentation/networking/pktgen.txt typo fixes: occuring -> occurring typo fixes: infomation -> information typo fixes: disadvantadge -> disadvantage typo fixes: aquire -> acquire typo fixes: mecanism -> mechanism typo fixes: bandwith -> bandwidth fix a typo in the RTC_CLASS help text smb is no longer maintained Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27ACPI: delete tracing macros from drivers/acpi/*.cPatrick Mochel
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...)Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27ACPI: un-export ACPI_WARNING() -- use printk(KERN_WARNING...)Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27ACPI: Enable ACPI error messages w/o CONFIG_ACPI_DEBUGThomas Renninger
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-24[ACPI] merge 3549 4320 4485 4588 4980 5483 5651 acpica asus fops pnpacpi ↵Len Brown
branches into release Signed-off-by: Len Brown <len.brown@intel.com>