summaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2012-10-03Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull first round of SCSI updates from James Bottomley: "This is a large set of updates, mostly for drivers (qla2xxx [including support for new 83xx based card], qla4xxx, mpt2sas, bfa, zfcp, hpsa, be2iscsi, isci, lpfc, ipr, ibmvfc, ibmvscsi, megaraid_sas). There's also a rework for tape adding virtually unlimited numbers of tape drives plus a set of dif fixes for sd and a fix for a live lock on hot remove of SCSI devices. This round includes a signed tag pull of isci-for-3.6 Signed-off-by: James Bottomley <JBottomley@Parallels.com>" Fix up trivial conflict in drivers/scsi/qla2xxx/qla_nx.c due to new PCI helper function use in a function that was removed by this pull. * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (198 commits) [SCSI] st: remove st_mutex [SCSI] sd: Ensure we correctly disable devices with unknown protection type [SCSI] hpsa: gen8plus Smart Array IDs [SCSI] qla4xxx: Update driver version to 5.03.00-k1 [SCSI] qla4xxx: Disable generating pause frames for ISP83XX [SCSI] qla4xxx: Fix double clearing of risc_intr for ISP83XX [SCSI] qla4xxx: IDC implementation for Loopback [SCSI] qla4xxx: update copyrights in LICENSE.qla4xxx [SCSI] qla4xxx: Fix panic while rmmod [SCSI] qla4xxx: Fail probe_adapter if IRQ allocation fails [SCSI] qla4xxx: Prevent MSI/MSI-X falling back to INTx for ISP82XX [SCSI] qla4xxx: Update idc reg in case of PCI AER [SCSI] qla4xxx: Fix double IDC locking in qla4_8xxx_error_recovery [SCSI] qla4xxx: Clear interrupt while unloading driver for ISP83XX [SCSI] qla4xxx: Print correct IDC version [SCSI] qla4xxx: Added new mbox cmd to pass driver version to FW [SCSI] scsi_dh_alua: Enable STPG for unavailable ports [SCSI] scsi_remove_target: fix softlockup regression on hot remove [SCSI] ibmvscsi: Fix host config length field overflow [SCSI] ibmvscsi: Remove backend abstraction ...
2012-10-03Merge tag 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata changes from Jeff Garzik: "Minor libata updates, nothing notable. 1) Apply -- and then revert -- the FUA feature. Caused disk corruption in linux-next, proving it cannot be turned on by default. Net effect to upstream tree: zero 2) New AHCI platform driver sata_highbank 3) Improve SCSI MODE SENSE handling; support MODE SELECT 4) AHCI: support aggressive device sleep (power mgmt) 5) sata_fsl: minor fix 6) pata_arasan: clk support" * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_mv: Fix warnings when no PCI [libata] Makefile: Fix build error in sata_highbank [libata] export ata_dev_set_feature() libata-core: use ATA_LBA in ata_build_rw_tf() ata/ahci_platform: Add clock framework support pata_arasan: add Device Tree probing capability pata_arasan: Add clk_{un}prepare() support ata: add platform driver for Calxeda AHCI controller sata_fsl: add workaround for data length mismatch on freescale V2 controller ahci: implement aggressive SATA device sleep support ata: define enum constants for IDENTIFY DEVICE Revert "libata: enable SATA disk fua detection on default" [libata] scsi: implement MODE SELECT command [libata] scsi: support MODE SENSE request for changeable and default parameters [libata] scsi: Remove unlikely() from FUA check libata: enable SATA disk fua detection on default
2012-10-02Merge SCSI misc branch into isci-for-3.6 tagJames Bottomley
2012-10-02sata_mv: Fix warnings when no PCIAndrew Lunn
Dove can be configured without PCI. We then get a number of warnings: warning: 'msi' defined but not used warning: 'mv5_sht' defined but not used warning: 'mv_dump_pci_cfg' defined but not used. Move around variables and add #ifdef as necassary to fix the warnings. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-10-02[libata] Makefile: Fix build error in sata_highbankMark Langsdorf
Allow sata_highbank to build even if no other users of libahci.o are built. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-22Merge branch 'multiplatform/platform-data' into next/multiplatformOlof Johansson
* multiplatform/platform-data: ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: nomadik: move platform_data definitions ARM: w90x900: move platform_data definitions ARM: vt8500: move platform_data definitions ARM: tegra: move sdhci platform_data definition ARM: sa1100: move platform_data definitions ARM: pxa: move platform_data definitions ARM: netx: move platform_data definitions ARM: msm: move platform_data definitions ARM: imx: move platform_data definitions ARM: ep93xx: move platform_data definitions ARM: davinci: move platform_data definitions ARM: at91: move platform_data definitions Conflicts due to removed files: arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to code removal: arch/arm/mach-tegra/board-paz00.c Context conflicts in: drivers/mmc/host/sdhci-tegra.c drivers/net/irda/pxaficp_ir.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-19ARM: samsung: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the samsung include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: linux-samsung-soc@vger.kernel.org
2012-09-14ARM: pxa: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the pxa include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Acked-By: Stefan Schmidt <stefan@openezx.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: Harald Welte <laforge@openezx.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Tomas Cech <sleep_walker@suse.cz> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: openezx-devel@lists.openezx.org
2012-09-14ARM: ep93xx: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the ep93xx include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: Axel Lin <axel.lin@gmail.com>
2012-09-13[libata] export ata_dev_set_feature()Jeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13libata-core: use ATA_LBA in ata_build_rw_tf()Sergei Shtylyov
Since READ/WRITE FPDMA QUEUED commands are 48-bit, bit 6 of the device register means LBA, the same as for READ/WRITE DMA EXT commands. So use ATA_LBA instead of the bare number in ata_build_rw_tf()'s branch dedicated to the NCQ commands. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13ata/ahci_platform: Add clock framework supportViresh Kumar
On many architectures, drivers are supposed to prepare/unprepare & enable/disable functional clock of device. This patch adds clock support for ahci_platform. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13pata_arasan: add Device Tree probing capabilityViresh Kumar
SPEAr platforms now support DT and so must convert all drivers to support DT. This patch adds DT probing support for Arasan Compact Flash controller and updates its documentation too. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13pata_arasan: Add clk_{un}prepare() supportViresh Kumar
clk_{un}prepare is mandatory for platforms using common clock framework. Since this driver is used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13ata: add platform driver for Calxeda AHCI controllerMark Langsdorf
Calxeda highbank SATA phy has intermittent problems bringing up a link with Gen3 drives. Retrying the phy hard reset can work-around this issue, but each reset also disables spread spectrum support. The reset function also needs to reprogram the phy to enable spread spectrum support. Create a new driver based on ahci_platform to support the Calxeda Highbank SATA controller. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13sata_fsl: add workaround for data length mismatch on freescale V2 controllerShaohui Xie
The freescale V2 SATA controller checks if the received data length matches the programmed length 'ttl', if not, it assumes that this is an error. In ATAPI, the 'ttl' is based on max allocation length and not the actual data transfer length, controller will raise 'DLM' (Data length Mismatch) error bit in Hstatus register. Along with 'DLM', DE (Device error) and FE (fatal Error) bits are also set in Hstatus register, 'E' (Internal Error) bit is set in Serror register and CE (Command Error) and DE (Device error) registers have the corresponding bit set. In this condition, we need to clear errors in following way: in the service routine, based on 'DLM' flag, HCONTROL[27] operation clears Hstatus, CE and DE registers, clear Serror register. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Anju Bhartiya <Anju.Bhartiya@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13ahci: implement aggressive SATA device sleep supportShane Huang
Device Sleep is a feature as described in AHCI 1.3.1 Technical Proposal. This feature enables an HBA and SATA storage device to enter the DevSleep interface state, enabling lower power SATA-based systems. Aggressive Device Sleep enables the HBA to assert the DEVSLP signal as soon as there are no commands outstanding to the device and the port specific Device Sleep idle timer has expired. This enables autonomous entry into the DevSleep interface state without waiting for software in power sensitive systems. This patch enables Aggressive Device Sleep only if both host controller and device support it. Tested on AMD reference board together with Device Sleep supported device sample. Signed-off-by: Shane Huang <shane.huang@amd.com> Reviewed-by: Aaron Lu <aaron.lwe@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13ahci: Add identifiers for ASM106x devicesAlan Cox
They don't always appear as AHCI class devices but instead as IDE class. Based on an initial patch by Hiroaki Nito Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42804 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13ahci: Add alternate identifier for the 88SE9172Alan Cox
This can also appear as 0x9192. Reported in bugzilla and confirmed with the board documentation for these boards. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42970 Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: The Stables <stable@vger.kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13ahci: Add JMicron 362 device IDsBen Hutchings
The JMicron JMB362 controller supports AHCI only, but some revisions use the IDE class code. These need to be matched by device ID. These additions have apparently been included by QNAP in their NAS devices using these controllers. References: http://bugs.debian.org/634180 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-09-13Revert "libata: enable SATA disk fua detection on default"Jeff Garzik
It caused several reported regressions. This reverts commit 91895b786e631ab47b618c901231f22b5a44115b.
2012-08-25libata: Add a space to " 2GB ATA Flash Disk" DMA blacklist entryPrarit Bhargava
commit d70e551c8e1ecb6f20422f8db6bfe6a0049edcb8, Add " 2GB ATA Flash Disk"/"ADMA428M" to DMA blacklist, should have added a space before 2GB. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-24[SCSI] libsas, ipr: cleanup ata_host flags initialization via ata_host_initDan Williams
libsas and ipr pass flags to ata_host_init that are meant for the port. ata_host flags: ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */ ATA_HOST_STARTED = (1 << 1), /* Host started */ ATA_HOST_PARALLEL_SCAN = (1 << 2), /* Ports on this host can be scanned in parallel */ ATA_HOST_IGNORE_ATA = (1 << 3), /* Ignore ATA devices on this host. */ flags passed by libsas: ATA_FLAG_SATA = (1 << 1), ATA_FLAG_PIO_DMA = (1 << 7), /* PIO cmds via DMA */ ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */ The only one that aliases is ATA_HOST_STARTED which is a 'don't care' in the libsas and ipr cases since ata_hosts from these sources are not registered with libata. Reported-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Brian King <brking@us.ibm.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-24[SCSI] libata: export ata_port suspend/resume infrastructure for sasDan Williams
Reuse ata_port_{suspend|resume}_common for sas. This path is chosen over adding coordination between ata-tranport and sas-transport because libsas wants to revalidate the domain at resume-time at the host level. It can not validate links have resumed properly until libata has had a chance to perform its revalidation, and any sane placing of an ata_port in the sas-transport model would delay it's resumption until after the host. Export the common portion of port suspend/resume (bypass pm_runtime), and allow sas to perform these operations asynchronously (similar to the libsas async-ata probe implmentation). Async operation is determined by having an external, rather than stack based, location for storing the result of the operation. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jacek Danecki <jacek.danecki@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-24[SCSI] libata: reset onceDan Williams
Hotplug testing with libsas currently encounters a 55 second wait for link recovery to give up. In the case where the user trusts the response time of their devices permit the recovery attempts to be limited to one. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-17[libata] scsi: implement MODE SELECT commandPaolo Bonzini
The cache_type file in sysfs lets users configure the disk cache in write-through or write-back modes. However, ata disks do not support writing to the file because they do not implement the MODE SELECT command. This patch adds a translation from MODE SELECT (for the caching page only) to the ATA SET FEATURES command. The set of changeable parameters answered by MODE SENSE is also adjusted accordingly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17[libata] scsi: support MODE SENSE request for changeable and default parametersPaolo Bonzini
Since the next patch will introduce support for MODE SELECT, it makes sense to start advertising which bits are actually changeable. For now, the answer is none. Default parameters can also be reported, they are simply the same as the current parameters. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17[libata] scsi: Remove unlikely() from FUA checkJeff Garzik
Some other unlikely() should probably be removed as well. A fresh look reveals an over-enthusiasm for unlikely() in libata-scsi.c. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17libata: enable SATA disk fua detection on defaultZheng Liu
Currently, SATA disk fua detection is disabled on default because most of devices don't support this feature at that time. With the development of technology, more and more SATA disks support this feature. So now we can enable this detection on default. Although fua detection is defined as a kernel module parameter, it is too hard to set its value because it must be loaded and set before system starts up. That needs to modify initrd file. So it is inconvenient for administrator who needs to manage a huge number of servers. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17[libata] new quirk, lift bridge limits for Buffalo DriveStation QuattroJeff Garzik
Michael Eitelwein writes: I have an external SATA drive that was slowed down by bridge limits. I found a solution in a thread on this list posted in 2008: It introduces whitelist entries in libata-core.c for devices with well working bridges (e.g. email on Fri, 31 Oct 2008 01:45:27 -0400). I added my device to this whitelist in a custom built kernel and it works fine for weeks now. How can I have this device added on the whitelist within the official kernel? Is this whitelist mechanism still supported or is there a smarter way to achieve whitelisting? I added the following whitelist entry for my Buffalo DriveStation Quattro "BUFFALO HD-QSU2/R5": /* Devices that do not need bridging limits applied */ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, { "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK, }, Reported-by: Michael Eitelwein <michael@eitelwein.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17[libata] Kconfig: Elaborate that SFF is meant for legacy and PATA stuffPaul Menzel
Building Linux for an ASUS Eee PC 701 4G with ata2.00: CFA: SILICONMOTION SM223AC, , max UDMA/66 ata2.00: 7815024 sectors, multi 0: LBA ata2.00: configured for UDMA/66 scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 7815024 512-byte logical blocks: (4.00 GB/3.72 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 1:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg0 type 0 I followed the advice to not use the deprecated old PATA subsystem ATA/ATAPI/MFM/RLL support (DEPRECATED) ---> and use the ATA subsystem instead. Serial ATA and Parallel ATA drivers ---> Unfortunately I needed several tries to find out, that I needed the SFF menu I had not selected before because I had never heard that term before. I think it would have helped me, to have PATA or legacy IDE in that item’s name. Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17[libata] acpi: call ata_acpi_gtm during ata port init timeAaron Lu
Commit 30dcf76acc695cbd2fa919e294670fe9552e16e7 mistakenly dropped the code to get an initial gtm for the IDE channel. This caused the following problem for Sergei: http://marc.info/?l=linux-kernel&m=134484963618457&w=2 Fix this by adding the call back in ata_acpi_bind_host, and due to this, the ata_ap_acpi_handle is modified accordingly. Tested-by: Sergei Trofimovich <slyich@gmail.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17ata_piix: Add Device IDs for Intel Lynx Point-LP PCHJames Ralston
This patch adds the IDE-mode SATA Device IDs for the Intel Lynx Point-LP PCH Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17ahci: Add Device IDs for Intel Lynx Point-LP PCHJames Ralston
This patch adds the AHCI-mode SATA Device IDs for the Intel Lynx Point-LP PCH Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17pata_atiixp: override cable detection on MSI E350DM-E33Arnd Hannemann
The mainboard MSI E350DM-E33 is advertised with 6 SATA ports. As it turns out, two of them seem to be driven by on-board SATA<->PATA converters. If a disk drive is connected to one of them kernel uses UDMA/33 mode due to cable detection: [ 34.550823] scsi4 : pata_atiixp [ 34.555517] scsi5 : pata_atiixp [ 34.555942] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14 [ 34.555948] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15 ... [ 35.040799] ata5.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133 [ 35.040806] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 35.040817] ata5.00: limited to UDMA/33 due to 40-wire cable [ 35.049166] ata5.00: configured for UDMA/33 [ 35.049402] scsi 4:0:0:0: Direct-Access ATA WDC WD20EADS-00R 01.0 PQ: 0 ANSI: 5 This patch forces "short cable" mode on this board, as it seems clear that the on-board SATA<->PATA "cable" is short. With this patch the disk is configured for UDMA/100: [ 5.976756] ata5.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133 [ 5.996434] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 6.024787] ata5.00: configured for UDMA/100 Testing revealed no transfer issues. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-17ahci: un-staticize ahci_dev_classifyRob Herring
Make ahci_dev_classify available to the ahci platform driver for custom hard reset function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-08-02Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
2012-07-31ata/pata_arasan: remove conditional compilation of clk codeViresh Kumar
With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h, there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif macros. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Jeff Garzik <jgarzik@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: viresh kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-27ATA: sata_mv: Add device tree supportAndrew Lunn
Add support for instantiating this driver from device tree, and add the necassary DT information to the kirkwood.dtsi file. This is based on previous work by Michael Walle and Jason Cooper. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Josh Coombs <josh.coombs@gmail.com>
2012-07-25[libata] pata_cmd64x: whitespace cleanupJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25libata-acpi: fix up for acpi_pm_device_sleep_state APIStephen Rothwell
After merging the libata tree, today's [2012-07-01] linux-next build (x86_64 allmodconfig) failed like this: drivers/ata/libata-acpi.c: In function 'ata_acpi_set_state': drivers/ata/libata-acpi.c:872:5: error: too few arguments to function 'acpi_pm_device_sleep_state' include/acpi/acpi_bus.h:418:5: note: declared here Caused by commit 3bd46600a7a7 ("libata-acpi: add ata port runtime D3Cold support") from the libata tree interacting with commit ee85f543710d ("ACPI/PM: specify lowest allowed state for device sleep state") from the pci tree. This patch adds ACPI_STATE_D3 as the new third parameter to acpi_pm_device_sleep_state() Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25Merge branch 'master' [vanilla Linus master] into libata-dev.git/upstreamJeff Garzik
Two bits were appended to the end of the bitfield list in struct scsi_device. Resolve that conflict by including both bits. Conflicts: include/scsi/scsi_device.h
2012-07-25sata_dwc_460ex: device tree may specify dma_channelThang Q. Nguyen
Only channel 0 is currently support and the driver code is fixed on channel 0. This patch lets device node specifying dma-channel in case it is not 0. If no dma-channel property is specified, channel 0 is used as default. Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25ahci, trivial: fixed coding style issues related to bracesJeffrin Jose
Fixed coding style issues related to braces found by checkpatch.pl in drivers/ata/ahci.c Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25ahci_platform: add hibernation callbacksShiraz Hashim
Use existing suspend, resume implementation for hibernation callbacks. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25libata-eh.c: local functions should not be exposed globallyH Hartley Sweeten
The function ata_ering_clear_cb is only referenced in this file and should be marked static to prevent it from being exposed globally. This quiets the sparse warning: warning: symbol 'ata_ering_clear_cb' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25libata-transport.c: local functions should not be exposed globallyH Hartley Sweeten
Functions not referenced outside of a source file should be marked static to prevent it from being exposed globally. This quiets the sparse warnings: warning: symbol 'ata_is_port' was not declared. Should it be static? warning: symbol 'ata_is_link' was not declared. Should it be static? warning: symbol 'ata_is_ata_dev' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25sata_dwc_460ex: support hardresetThang Q. Nguyen
The hardreset operation is currently not supported. This causes sometime the SATA driver does cause kernel crash because of none-determined state.a This patch will fix the issue. Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25ata: use module_pci_driverAxel Lin
This patch converts the drivers in drivers/ata/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Mikael Pettersson <mikpe@it.uu.se> Cc: Mark Lord <kernel@teksavvy.com> Cc: Jeremy Higdon <jeremy@sgi.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-07-25drivers/ata/pata_pcmcia.c: adjust suspicious bit operationJulia Lawall
IO_DATA_PATH_WIDTH_8 is 0, so a bit-and with it is always false. The value IO_DATA_PATH_WIDTH covers the bits of the IO_DATA_PATH constants, so first pick those bits and then make the test using !=. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>