summaryrefslogtreecommitdiff
path: root/drivers/base
AgeCommit message (Collapse)Author
2013-09-12thp: account anon transparent huge pages into NR_ANON_PAGESKirill A. Shutemov
We use NR_ANON_PAGES as base for reporting AnonPages to user. There's not much sense in not accounting transparent huge pages there, but add them on printing to user. Let's account transparent huge pages in NR_ANON_PAGES in the first place. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hugh Dickins <hughd@google.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: Ning Qu <quning@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-10dma-buf: Expose buffer size to userspace (v2)Christopher James Halse Rogers
Each dma-buf has an associated size and it's reasonable for userspace to want to know what it is. Since userspace already has an fd, expose the size using the size = lseek(fd, SEEK_END, 0); lseek(fd, SEEK_CUR, 0); idiom. v2: Added Daniel's sugeested documentation, with minor fixups Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2013-09-10dma-buf: Check return value of anon_inode_getfileTuomas Tynkkynen
anon_inode_getfile might fail, so check its return value. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2013-09-09Merge branch 'for-v3.12' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA mapping update from Marek Szyprowski: "This contains an addition of Device Tree support for reserved memory regions (Contiguous Memory Allocator is one of the drivers for it) and changes required by the KVM extensions for PowerPC architectue" * 'for-v3.12' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: init: add support for reserved memory defined by device tree drivers: of: add initialization code for dma reserved memory drivers: of: add function to scan fdt nodes given by path drivers: dma-contiguous: clean source code and prepare for device tree
2013-09-05Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Gleb Natapov: "The highlights of the release are nested EPT and pv-ticketlocks support (hypervisor part, guest part, which is most of the code, goes through tip tree). Apart of that there are many fixes for all arches" Fix up semantic conflicts as discussed in the pull request thread.. * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (88 commits) ARM: KVM: Add newlines to panic strings ARM: KVM: Work around older compiler bug ARM: KVM: Simplify tracepoint text ARM: KVM: Fix kvm_set_pte assignment ARM: KVM: vgic: Bump VGIC_NR_IRQS to 256 ARM: KVM: Bugfix: vgic_bytemap_get_reg per cpu regs ARM: KVM: vgic: fix GICD_ICFGRn access ARM: KVM: vgic: simplify vgic_get_target_reg KVM: MMU: remove unused parameter KVM: PPC: Book3S PR: Rework kvmppc_mmu_book3s_64_xlate() KVM: PPC: Book3S PR: Make instruction fetch fallback work for system calls KVM: PPC: Book3S PR: Don't corrupt guest state when kernel uses VMX KVM: x86: update masterclock when kvmclock_offset is calculated (v2) KVM: PPC: Book3S: Fix compile error in XICS emulation KVM: PPC: Book3S PR: return appropriate error when allocation fails arch: powerpc: kvm: add signed type cast for comparation KVM: x86: add comments where MMIO does not return to the emulator KVM: vmx: count exits to userspace during invalid guest emulation KVM: rename __kvm_io_bus_sort_cmp to kvm_io_bus_cmp kvm: optimize away THP checks in kvm_is_mmio_pfn() ...
2013-09-05Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-09-03Merge tag 'pm+acpi-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: 1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction of Intel Thunderbolt support on systems that use ACPI for signalling Thunderbolt hotplug events. This also should make ACPIPHP work in some cases in which it was known to have problems. From Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov. 2) ACPI core code cleanups and dock station support cleanups from Jiang Liu and Rafael J Wysocki. 3) Fixes for locking problems related to ACPI device hotplug from Rafael J Wysocki. 4) ACPICA update to version 20130725 includig fixes, cleanups, support for more than 256 GPEs per GPE block and a change to make the ACPI PM Timer optional (we've seen systems without the PM Timer in the field already). One of the fixes, related to the DeRefOf operator, is necessary to prevent some Windows 8 oriented AML from causing problems to happen. From Bob Moore, Lv Zheng, and Jung-uk Kim. 5) Removal of the old and long deprecated /proc/acpi/event interface and related driver changes from Thomas Renninger. 6) ACPI and Xen changes to make the reduced hardware sleep work with the latter from Ben Guthro. 7) ACPI video driver cleanups and a blacklist of systems that should not tell the BIOS that they are compatible with Windows 8 (or ACPI backlight and possibly other things will not work on them). From Felipe Contreras. 8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo, Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen, Toshi Kani, and Wei Yongjun. 9) cpufreq ondemand governor target frequency selection change to reduce oscillations between min and max frequencies (essentially, it causes the governor to choose target frequencies proportional to load) from Stratos Karafotis. 10) cpufreq fixes allowing sysfs attributes file permissions to be preserved over suspend/resume cycles Srivatsa S Bhat. 11) Removal of Device Tree parsing for CPU device nodes from multiple cpufreq drivers that required some changes related to of_get_cpu_node() to be made in a few architectures and in the driver core. From Sudeep KarkadaNagesha. 12) cpufreq core fixes and cleanups related to mutual exclusion and driver module references from Viresh Kumar, Lukasz Majewski and Rafael J Wysocki. 13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap, Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo, Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd, Stratos Karafotis, and Viresh Kumar. 14) Fixes to prevent race conditions in coupled cpuidle from happening from Colin Cross. 15) cpuidle core fixes and cleanups from Daniel Lezcano and Tuukka Tikkanen. 16) Assorted cpuidle fixes and cleanups from Daniel Lezcano, Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij, and Sahara. 17) System sleep tracing changes from Todd E Brandt and Shuah Khan. 18) PNP subsystem conversion to using struct dev_pm_ops for power management from Shuah Khan. * tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits) cpufreq: Don't use smp_processor_id() in preemptible context cpuidle: coupled: fix race condition between pokes and safe state cpuidle: coupled: abort idle if pokes are pending cpuidle: coupled: disable interrupts after entering safe state ACPI / hotplug: Remove containers synchronously driver core / ACPI: Avoid device hot remove locking issues cpufreq: governor: Fix typos in comments cpufreq: governors: Remove duplicate check of target freq in supported range cpufreq: Fix timer/workqueue corruption due to double queueing ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT ACPI / thermal: Add check of "_TZD" availability and evaluating result cpufreq: imx6q: Fix clock enable balance ACPI: blacklist win8 OSI for buggy laptops cpufreq: tegra: fix the wrong clock name cpuidle: Change struct menu_device field types cpuidle: Add a comment warning about possible overflow cpuidle: Fix variable domains in get_typical_interval() cpuidle: Fix menu_device->intervals type cpuidle: CodingStyle: Break up multiple assignments on single line cpuidle: Check called function parameter in get_typical_interval() ...
2013-09-03Merge tag 'driver-core-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ...
2013-09-03Merge tag 'regmap-v3.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "A quiet release for regmap, some cleanups, fixes and: - Improved node coalescing for rbtree, reducing memory usage and improving performance during syncs. - Support for registering multiple register patches. - A quirk for handling interrupts that need to be clear when masked in regmap-irq" * tag 'regmap-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: rbtree: Make cache_present bitmap per node regmap: rbtree: Reduce number of nodes, take 2 regmap: rbtree: Simplify adjacent node look-up regmap: debugfs: Fix continued read from registers file regcache-rbtree: Fix reg_stride != 1 regmap: Allow multiple patches to be registered regmap: regcache: allow read-only regs to be cached regmap: fix regcache_reg_present() for empty cache regmap: core: allow a virtual range to cover its own data window regmap: irq: document mask/wake_invert flags regmap: irq: make flags bool and put them in a bitfield regmap: irq: Allow to acknowledge masked interrupts during initialization regmap: Provide __acquires/__releases annotations
2013-08-31Merge remote-tracking branch 'regmap/topic/sparse' into regmap-nextMark Brown
2013-08-31Merge remote-tracking branch 'regmap/topic/rbtree' into regmap-nextMark Brown
2013-08-31Merge remote-tracking branch 'regmap/topic/range' into regmap-nextMark Brown
2013-08-31Merge remote-tracking branch 'regmap/topic/patch' into regmap-nextMark Brown
2013-08-31Merge remote-tracking branch 'regmap/topic/irq' into regmap-nextMark Brown
2013-08-31Merge remote-tracking branch 'regmap/topic/cache' into regmap-nextMark Brown
2013-08-30firmware loader: fix pending_fw_head list corruptionMaxime Bizon
Got the following oops just before reboot: Unable to handle kernel NULL pointer dereference at virtual address 00000000 [<8028d300>] (__list_del_entry+0x44/0xac) [<802e3320>] (__fw_load_abort.part.13+0x1c/0x50) [<802e337c>] (fw_shutdown_notify+0x28/0x50) [<80034f80>] (notifier_call_chain.isra.1+0x5c/0x9c) [<800350ec>] (__blocking_notifier_call_chain+0x44/0x58) [<80035114>] (blocking_notifier_call_chain+0x14/0x18) [<80035d64>] (kernel_restart_prepare+0x14/0x38) [<80035d94>] (kernel_restart+0xc/0x50) The following race condition triggers here: _request_firmware_load() device_create_file(...) kobject_uevent(...) (schedule) (resume) firmware_loading_store(1) firmware_loading_store(0) list_del_init(&buf->pending_list) (schedule) (resume) list_add(&buf->pending_list, &pending_fw_head); wait_for_completion(&buf->completion); causing an oops later when walking pending_list after the firmware has been released. The proposed fix is to move the list_add() before sysfs attribute creation. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Acked-by: Ming Lei <ming.lei@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30Merge branch 'acpi-hotplug'Rafael J. Wysocki
* acpi-hotplug: ACPI / hotplug: Remove containers synchronously driver core / ACPI: Avoid device hot remove locking issues
2013-08-29driver core / ACPI: Avoid device hot remove locking issuesRafael J. Wysocki
device_hotplug_lock is held around the acpi_bus_trim() call in acpi_scan_hot_remove() which generally removes devices (it removes ACPI device objects at least, but it may also remove "physical" device objects through .detach() callbacks of ACPI scan handlers). Thus, potentially, device sysfs attributes are removed under that lock and to remove those attributes it is necessary to hold the s_active references of their directory entries for writing. On the other hand, the execution of a .show() or .store() callback from a sysfs attribute is carried out with that attribute's s_active reference held for reading. Consequently, if any device sysfs attribute that may be removed from within acpi_scan_hot_remove() through acpi_bus_trim() has a .store() or .show() callback which acquires device_hotplug_lock, the execution of that callback may deadlock with the removal of the attribute. [Unfortunately, the "online" device attribute of CPUs and memory blocks is one of them.] To avoid such deadlocks, make all of the sysfs attribute callbacks that need to lock device hotplug, for example store_online(), use a special function, lock_device_hotplug_sysfs(), to lock device hotplug and return the result of that function immediately if it is not zero. This will cause the s_active reference of the directory entry in question to be released and the syscall to be restarted if device_hotplug_lock cannot be acquired. [show_online() actually doesn't need to lock device hotplug, but it is useful to serialize it with respect to device_offline() and device_online() for the same device (in case user space attempts to run them concurrently) which can be done with the help of device_lock().] Reported-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reported-and-tested-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-08-29regmap: rbtree: Make cache_present bitmap per nodeLars-Peter Clausen
With devices which have a dense and small register map but placed at a large offset the global cache_present bitmap imposes a huge memory overhead. Making the cache_present per rbtree node avoids the issue and easily reduces the memory footprint by a factor of ten. For devices with a more sparse map or without a large base register offset the memory usage might increase slightly by a few bytes, but not significantly. E.g. for a device which has ~50 registers at offset 0x4000 the memory footprint of the register cache goes down form 2496 bytes to 175 bytes. Moving the bitmap to a per node basis means that the handling of the bitmap is now cache implementation specific and can no longer be managed by the core. The regcache_sync_block() function is extended by a additional parameter so that the cache implementation can tell the core which registers in the block are set and which are not. The parameter is optional and if NULL the core assumes that all registers are set. The rbtree cache also needs to implement its own drop callback instead of relying on the core to handle this. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29regmap: rbtree: Reduce number of nodes, take 2Lars-Peter Clausen
Support for reducing the number of nodes and memory consumption of the rbtree cache by allowing for small unused holes in the node's register cache block was initially added in commit 0c7ed856 ("regmap: Cut down on the average # of nodes in the rbtree cache"). But the commit had problems and so its effect was reverted again in commit 4e67fb5 ("regmap: rbtree: Fix overlapping rbnodes."). This patch brings the feature back of reducing the average number of nodes, which will speedup node look-up, while at the same time also reducing the memory usage of the rbtree cache. This patch takes a slightly different approach than the original patch though. It modifies the adjacent node look-up to not only consider nodes that are just one to the left or the right of the register but any node that falls in a certain range around the register. The range is calculated based on how much memory it would take to allocate a new node compared to how much memory it takes adding a set of unused registers to an existing node. E.g. if a node takes up 24 bytes and each register in a block uses 1 byte the range will be from the register address - 24 to the register address + 24. If we find a node that falls within this range it is cheaper or as expensive to add the register to the existing node and have a couple of unused registers in the node's cache compared to allocating a new node. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29regmap: rbtree: Simplify adjacent node look-upLars-Peter Clausen
A register which is adjacent to a node will either be left to the first register or right to the last register. It will not be within the node's range, so there is no point in checking for each register cached by the node whether the new register is next to it. It is sufficient to check whether the register comes before the first register or after the last register of the node. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29Merge remote-tracking branch 'regmap/topic/cache' into regmap-rbtreeMark Brown
2013-08-29drivers/base/memory.c: fix show_mem_removable() to handle missing sectionsRuss Anderson
"cat /sys/devices/system/memory/memory*/removable" crashed the system. The problem is that show_mem_removable() is passing a bad pfn to is_mem_section_removable(), which causes if (!node_online(page_to_nid(page))) to blow up. Why is it passing in a bad pfn? The reason is that show_mem_removable() will loop sections_per_block times. sections_per_block is 16, but mem->section_count is 8, indicating holes in this memory block. Checking that the memory section is present before checking to see if the memory section is removable fixes the problem. harp5-sys:~ # cat /sys/devices/system/memory/memory*/removable 0 1 1 1 1 1 1 1 1 1 1 1 1 1 BUG: unable to handle kernel paging request at ffffea00c3200000 IP: [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90 PGD 83ffd4067 PUD 37bdfce067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: autofs4 binfmt_misc rdma_ucm rdma_cm iw_cm ib_addr ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_cm ib_uverbs ib_umad iw_cxgb3 cxgb3 mdio mlx4_en mlx4_ib ib_sa mlx4_core ib_mthca ib_mad ib_core fuse nls_iso8859_1 nls_cp437 vfat fat joydev loop hid_generic usbhid hid hwperf(O) numatools(O) dm_mod iTCO_wdt ipv6 iTCO_vendor_support igb i2c_i801 ioatdma i2c_algo_bit ehci_pci pcspkr lpc_ich i2c_core ehci_hcd ptp sg mfd_core dca rtc_cmos pps_core mperf button xhci_hcd sd_mod crc_t10dif usbcore usb_common scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh gru(O) xvma(O) xfs crc32c libcrc32c thermal sata_nv processor piix mptsas mptscsih scsi_transport_sas mptbase megaraid_sas fan thermal_sys hwmon ext3 jbd ata_piix ahci libahci libata scsi_mod CPU: 4 PID: 5991 Comm: cat Tainted: G O 3.11.0-rc5-rja-uv+ #10 Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013 task: ffff88081f034580 ti: ffff880820022000 task.ti: ffff880820022000 RIP: 0010:[<ffffffff81117ed1>] [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90 RSP: 0018:ffff880820023df8 EFLAGS: 00010287 RAX: 0000000000040000 RBX: ffffea00c3200000 RCX: 0000000000000004 RDX: ffffea00c30b0000 RSI: 00000000001c0000 RDI: ffffea00c3200000 RBP: ffff880820023e38 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea00c33c0000 R13: 0000160000000000 R14: 6db6db6db6db6db7 R15: 0000000000000001 FS: 00007ffff7fb2700(0000) GS:ffff88083fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffea00c3200000 CR3: 000000081b954000 CR4: 00000000000407e0 Call Trace: show_mem_removable+0x41/0x70 dev_attr_show+0x2a/0x60 sysfs_read_file+0xf7/0x1c0 vfs_read+0xc8/0x130 SyS_read+0x5d/0xa0 system_call_fastpath+0x16/0x1b Signed-off-by: Russ Anderson <rja@sgi.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-28drivers/base/memory.c: introduce help macro to_memory_blockGu Zheng
Introduce help macro to_memory_block to hide the conversion(device-->memory_block), just clean up. Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-28Merge remote-tracking branch 'origin/next' into kvm-ppc-nextAlexander Graf
Conflicts: mm/Kconfig CMA DMA split and ZSWAP introduction were conflicting, fix up manually.
2013-08-28regmap: debugfs: Fix continued read from registers fileLars-Peter Clausen
The regmap_debugfs_get_dump_start() function maps from a file offset to the register that can be found at that position in the file. This is done using a look-up table. Commit d6814a7d ("regmap: debugfs: Suppress cache for partial register files") added a check to bypass the look-up table for partial register files, since the offsets in that table are only correct for the full register file. The check incorrectly uses the file offset instead of the register base address and returns it. This will cause the file offset to be interpreted as a register address which will result in a incorrect output from the registers file for all reads except at position 0. The issue can easily be reproduced by doing small reads the registers file, e.g. `dd if=registers bs=10 count=5`. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-08-27driver core: add #include <linux/sysfs.h> to core files.Greg Kroah-Hartman
This is needed to fix the build on sh systems. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27regcache-rbtree: Fix reg_stride != 1Lars-Peter Clausen
There are a couple of calculations, which convert between register addresses and block indices, in regcache_rbtree_sync() and regcache_rbtree_node_alloc() which assume that reg_stride is 1. This will break the rb cache for configurations which do not use a reg_stride of 1. Also rename 'base' in regcache_rbtree_sync() to 'start' to avoid confusion with 'base_reg'. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-27drivers: dma-contiguous: clean source code and prepare for device treeMarek Szyprowski
This patch cleans the initialization of dma contiguous framework. The all-in-one dma_declare_contiguous() function is now separated into dma_contiguous_reserve_area() which only steals the the memory from memblock allocator and dma_contiguous_add_device() function, which assigns given device to the specified reserved memory area. This improves the flexibility in defining contiguous memory areas and assigning device to them, because now it is possible to assign more than one device to the given contiguous memory area. Such split in initialization procedure is also required for upcoming device tree support. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Tomasz Figa <t.figa@samsung.com>
2013-08-26Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (60 commits) cpufreq: pmac32-cpufreq: remove device tree parsing for cpu nodes cpufreq: pmac64-cpufreq: remove device tree parsing for cpu nodes cpufreq: maple-cpufreq: remove device tree parsing for cpu nodes cpufreq: arm_big_little: remove device tree parsing for cpu nodes cpufreq: kirkwood-cpufreq: remove device tree parsing for cpu nodes cpufreq: spear-cpufreq: remove device tree parsing for cpu nodes cpufreq: highbank-cpufreq: remove device tree parsing for cpu nodes cpufreq: cpufreq-cpu0: remove device tree parsing for cpu nodes cpufreq: imx6q-cpufreq: remove device tree parsing for cpu nodes drivers/bus: arm-cci: avoid parsing DT for cpu device nodes ARM: mvebu: remove device tree parsing for cpu nodes ARM: topology: remove hwid/MPIDR dependency from cpu_capacity of/device: add helper to get cpu device node from logical cpu index driver/core: cpu: initialize of_node in cpu's device struture ARM: DT/kernel: define ARM specific arch_match_cpu_phys_id of: move of_get_cpu_node implementation to DT core library powerpc: refactor of_get_cpu_node to support other architectures openrisc: remove undefined of_get_cpu_node declaration microblaze: remove undefined of_get_cpu_node declaration cpufreq: fix bad unlock balance on !CONFIG_SMP ...
2013-08-26Merge branch 'pm-opp'Rafael J. Wysocki
* pm-opp: PM / OPP: Export opp_add()
2013-08-26Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: PM / Sleep: new trace event to print device suspend and resume times PM / Sleep: increase ftrace coverage in suspend/resume
2013-08-24driver core: firmware: use __ATTR_RW()Greg Kroah-Hartman
Use __ATTR_RW() instead of __ATTR() to make it more obvious what the type of attribute is being created. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-24driver core: core: use DEVICE_ATTR_ROGreg Kroah-Hartman
Use DEVICE_ATTR_RO() instead of a "raw" __ATTR macro, making it easier to audit exactly what is going on with the sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23driver core: bus: use DRIVER_ATTR_WO()Greg Kroah-Hartman
There are two bus attributes that can better be defined using DRIVER_ATTR_WO(), so convert them to the new macro, making it easier to audit attribute permissions. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23driver-core: platform: convert bus code to use dev_groupsGreg Kroah-Hartman
The dev_attrs field of struct bus_type is going away soon, dev_groups should be used instead. This converts the platform bus code to use the correct field. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-22sysfs.h: remove attr_name() macroGreg Kroah-Hartman
Gotta love a macro that doesn't reduce the typing you have to do. Also, only the driver core, and one network driver uses this. The driver core functions will be going away soon, and I'll convert the network driver soon to not need this as well, so delete it for now before anyone else gets some bright ideas and wants to use it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-21sysfs: add sysfs_create/remove_groups()Greg Kroah-Hartman
These functions are being open-coded in 3 different places in the driver core, and other driver subsystems will want to start doing this as well, so move it to the sysfs core to keep it all in one place, where we know it is written properly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-21drivers: base: use standard device online/offline for state changeSeth Jennings
There are two ways to set the online/offline state for a memory block: echo 0|1 > online and echo online|online_kernel|online_movable|offline > state. The state attribute can online a memory block with extra data, the "online type", where the online attribute uses a default online type of ONLINE_KEEP, same as echo online > state. Currently there is a state_mutex that provides consistency between the memory block state and the underlying memory. The problem is that this code does a lot of things that the common device layer can do for us, such as the serialization of the online/offline handlers using the device lock, setting the dev->offline field, and calling kobject_uevent(). This patch refactors the online/offline code to allow the common device_[online|offline] functions to be used. The result is a simpler and more common code path for the two state setting mechanisms. It also removes the state_mutex from the struct memory_block as the memory block device lock provides the state consistency. No functional change is intended by this patch. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-21drivers: base: refactor add_memory_section() to add_memory_block()Seth Jennings
Right now memory_dev_init() maintains the memory block pointer between iterations of add_memory_section(). This is nasty. This patch refactors add_memory_section() to become add_memory_block(). The refactoring pulls the section scanning out of memory_dev_init() and simplifies the signature. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-21drivers: base: remove improper get/put in add_memory_section()Seth Jennings
The path through add_memory_section() when the memory block already exists uses flawed refcounting logic. A get_device() is done on a memory block using a pointer that might not be valid as we dropped our previous reference and didn't obtain a new reference in the proper way. Lets stop pretending and just remove the get/put. The mem_sysfs_mutex, which we hold over the entire init loop now, will prevent the memory blocks from disappearing from under us. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-21drivers: base: reduce add_memory_section() for boot-time onlySeth Jennings
Now that add_memory_section() is only called from boot time, reduce the logic and remove the enum. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-21drivers: base: unshare add_memory_section() from hotplugSeth Jennings
add_memory_section() is currently called from both boot time and run time via hotplug and there is a lot of nastiness to allow for shared code including an enum parameter to convey the calling context to add_memory_section(). This patch is the first step in breaking up the messy code sharing by pulling the hotplug path for add_memory_section() directly into register_new_memory(). Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-21drivers: base: use device get/put functionsSeth Jennings
Use the [get|put]_device functions for ref'ing the memory block device rather than the kobject functions which should be hidden away by the device layer. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-21drivers: base: remove unneeded variableSeth Jennings
The error variable is not needed. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-21drivers: base: move mutex lock out of add_memory_section()Seth Jennings
There is no point in releasing the mutex for each section that is added during boot time. Just hold it over the entire initialization loop. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-21regmap: rbtree: Fix overlapping rbnodes.David Jander
Avoid overlapping register regions by making the initial blklen of a new node 1. If a register write occurs to a yet uncached register, that is lower than but near an existing node's base_reg, a new node is created and it's blklen is set to an arbitrary value (sizeof(*rbnode)). That may cause this node to overlap with another node. Those nodes should be merged, but this merge doesn't happen yet, so this patch at least makes the initial blklen small enough to avoid hitting the wrong node, which may otherwise lead to severe breakage. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-08-21driver/core: cpu: initialize of_node in cpu's device strutureSudeep KarkadaNagesha
CPUs are also registered as devices but the of_node in these cpu devices are not initialized. Currently different drivers requiring to access cpu device node are parsing the nodes themselves and initialising the of_node in cpu device. The of_node in all the cpu devices needs to be initialized properly and at one place. The best place to update this is CPU subsystem driver when registering the cpu devices. The OF/DT core library now provides of_get_cpu_node to retrieve a cpu device node for a given logical index by abstracting the architecture specific details. This patch uses of_get_cpu_node to assign of_node when registering the cpu devices. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
2013-08-20drivers / dma-contiguous: Fix __init attribute locationHanjun Guo
__init belongs after the return type on functions, not before it. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20drivers / platform: Fix __init attribute locationHanjun Guo
__init belongs after the return type on functions, not before it. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>