summaryrefslogtreecommitdiff
path: root/drivers/base
AgeCommit message (Collapse)Author
2013-03-07Merge tag 'pm+acpi-3.9-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael J Wysocki: - Two fixes for the new intel_pstate driver from Dirk Brandewie. - Fix for incorrect usage of the .find_bridge() callback from struct acpi_bus_type in the USB core and subsequent removal of that callback from Rafael J Wysocki. - ACPI processor driver cleanups from Chen Gang and Syam Sidhardhan. - ACPI initialization and error messages fix from Joe Perches. - Operating Performance Points documentation improvement from Nishanth Menon. - Fixes for memory leaks and potential concurrency issues and sysfs attributes leaks during device removal in the core device PM QoS code from Rafael J Wysocki. - Calxeda Highbank cpufreq driver simplification from Emilio López. - cpufreq comment cleanup from Namhyung Kim. - Fix for a section mismatch in Calxeda Highbank interprocessor communication code from Mark Langsdorf (this is not a PM fix strictly speaking, but the code in question went in through the PM tree). * tag 'pm+acpi-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq / intel_pstate: Do not load on VM that does not report max P state. cpufreq / intel_pstate: Fix intel_pstate_init() error path ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type ACPI / glue: Add .match() callback to struct acpi_bus_type ACPI / porocessor: Beautify code, pr->id is u32 which is never < 0 ACPI / processor: Remove redundant NULL check before kfree ACPI / Sleep: Avoid interleaved message on errors PM / QoS: Remove device PM QoS sysfs attributes at the right place PM / QoS: Fix concurrency issues and memory leaks in device PM QoS cpufreq: highbank: do not initialize array with a loop PM / OPP: improve introductory documentation cpufreq: Fix a typo in comment mailbox, pl320-ipc: remove __init from probe function
2013-03-07Merge tag 'regmap-v3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap PM fix from Mark Brown: "A simple fix to stop us leaking a runtime PM reference in the case where we fail to enable a device." * tag 'regmap-v3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: irq: call pm_runtime_put in pm_runtime_get_sync failed case
2013-03-04PM / QoS: Remove device PM QoS sysfs attributes at the right placeRafael J. Wysocki
Device PM QoS sysfs attributes, if present during device removal, are removed from within device_pm_remove(), which is too late, since dpm_sysfs_remove() has already removed the whole attribute group they belonged to. However, moving the removal of those attributes to dpm_sysfs_remove() alone is not sufficient, because in theory they still can be re-added right after being removed by it (the device's driver is still bound to it at that point). For this reason, move the entire desctruction of device PM QoS constraints to dpm_sysfs_remove() and make it prevent any new constraints from being added after it has run. Also, move the initialization of the power.qos field in struct device to device_pm_init_common() and drop the no longer needed dev_pm_qos_constraints_init(). Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-04PM / QoS: Fix concurrency issues and memory leaks in device PM QoSRafael J. Wysocki
The current device PM QoS code assumes that certain functions will never be called in parallel with each other (for example, it is assumed that dev_pm_qos_expose_flags() won't be called in parallel with dev_pm_qos_hide_flags() for the same device and analogously for the latency limit), which may be overly optimistic. Moreover, dev_pm_qos_expose_flags() and dev_pm_qos_expose_latency_limit() leak memory in error code paths (req needs to be freed on errors) and __dev_pm_qos_drop_user_request() forgets to free the request. To fix the above issues put more things under the device PM QoS mutex to make them mutually exclusive and add the missing freeing of memory. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-01regmap: irq: call pm_runtime_put in pm_runtime_get_sync failed caseLi Fei
Even in failed case of pm_runtime_get_sync, the usage_count is incremented. In order to keep the usage_count with correct value and runtime power management to behave correctly, call pm_runtime_put(_sync) in such case. Signed-off-by Liu Chuansheng <chuansheng.liu@intel.com> Signed-off-by: Li Fei <fei.li@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-27CHROMIUM: dma-buf: restore args on failure of dma_buf_mmapJohn Sheu
Callers to dma_buf_mmap expect to fput() the vma struct's vm_file themselves on failure. Not restoring the struct's data on failure causes a double-decrement of the vm_file's refcount. Signed-off-by: John Sheu <sheu@google.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2013-02-27dma-buf: implement vmap refcounting in the interface logicDaniel Vetter
All drivers which implement this need to have some sort of refcount to allow concurrent vmap usage. Hence implement this in the dma-buf core. To protect against concurrent calls we need a lock, which potentially causes new funny locking inversions. But this shouldn't be a problem for exporters with statically allocated backing storage, and more dynamic drivers have decent issues already anyway. Inspired by some refactoring patches from Aaron Plattner, who implemented the same idea, but only for drm/prime drivers. v2: Check in dma_buf_release that no dangling vmaps are left. Suggested by Aaron Plattner. We might want to do similar checks for attachments, but that's for another patch. Also fix up ERR_PTR return for vmap. v3: Check whether the passed-in vmap address matches with the cached one for vunmap. Eventually we might want to remove that parameter - compared to the kmap functions there's no need for the vaddr for unmapping. Suggested by Chris Wilson. v4: Fix a brown-paper-bag bug spotted by Aaron Plattner. Cc: Aaron Plattner <aplattner@nvidia.com> Reviewed-by: Aaron Plattner <aplattner@nvidia.com> Tested-by: Aaron Plattner <aplattner@nvidia.com> Reviewed-by: Rob Clark <rob@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2013-02-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-26switch vfs_getattr() to struct pathAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-25Merge tag 'modules-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module update from Rusty Russell: "The sweeping change is to make add_taint() explicitly indicate whether to disable lockdep, but it's a mechanical change." * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: MODSIGN: Add option to not sign modules during modules_install MODSIGN: Add -s <signature> option to sign-file MODSIGN: Specify the hash algorithm on sign-file command line MODSIGN: Simplify Makefile with a Kconfig helper module: clean up load_module a little more. modpost: Ignore ARC specific non-alloc sections module: constify within_module_* taint: add explicit flag to show whether lock dep is still OK. module: printk message when module signature fail taints kernel.
2013-02-24pm / runtime: force memory allocation with no I/O during Runtime PM callbcackMing Lei
Apply the introduced memalloc_noio_save() and memalloc_noio_restore() to force memory allocation with no I/O during runtime_resume/runtime_suspend callback on device with the flag of 'memalloc_noio' set. Signed-off-by: Ming Lei <ming.lei@canonical.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Decotigny <david.decotigny@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@kernel.dk> Cc: Minchan Kim <minchan@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.de> Cc: Jiri Kosina <jiri.kosina@suse.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-24pm / runtime: introduce pm_runtime_set_memalloc_noio()Ming Lei
Introduce the flag memalloc_noio in 'struct dev_pm_info' to help PM core to teach mm not allocating memory with GFP_KERNEL flag for avoiding probable deadlock. As explained in the comment, any GFP_KERNEL allocation inside runtime_resume() or runtime_suspend() on any one of device in the path from one block or network device to the root device in the device tree may cause deadlock, the introduced pm_runtime_set_memalloc_noio() sets or clears the flag on device in the path recursively. Signed-off-by: Ming Lei <ming.lei@canonical.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oneukum@suse.de> Cc: Jiri Kosina <jiri.kosina@suse.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Decotigny <david.decotigny@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-24memory-hotplug: check whether all memory blocks are offlined or not when ↵Yasuaki Ishimatsu
removing memory We remove the memory like this: 1. lock memory hotplug 2. offline a memory block 3. unlock memory hotplug 4. repeat 1-3 to offline all memory blocks 5. lock memory hotplug 6. remove memory(TODO) 7. unlock memory hotplug All memory blocks must be offlined before removing memory. But we don't hold the lock in the whole operation. So we should check whether all memory blocks are offlined before step6. Otherwise, kernel maybe panicked. Offlining a memory block and removing a memory device can be two different operations. Users can just offline some memory blocks without removing the memory device. For this purpose, the kernel has held lock_memory_hotplug() in __offline_pages(). To reuse the code for memory hot-remove, we repeat step 1-3 to offline all the memory blocks, repeatedly lock and unlock memory hotplug, but not hold the memory hotplug lock in the whole operation. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21Merge tag 'usb-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB merge for 3.9-rc1 Nothing major, lots of gadget fixes, and of course, xhci stuff. All of this has been in linux-next for a while, with the exception of the last 3 patches, which were reverts of patches in the tree that caused problems, they went in yesterday." * tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits) Revert "USB: EHCI: make ehci-vt8500 a separate driver" Revert "USB: EHCI: make ehci-orion a separate driver" Revert "USB: update host controller Kconfig entries" USB: update host controller Kconfig entries USB: EHCI: make ehci-orion a separate driver USB: EHCI: make ehci-vt8500 a separate driver USB: usb-storage: unusual_devs update for Super TOP SATA bridge USB: ehci-omap: Fix autoloading of module USB: ehci-omap: Don't free gpios that we didn't request USB: option: add Huawei "ACM" devices using protocol = vendor USB: serial: fix null-pointer dereferences on disconnect USB: option: add Yota / Megafon M100-1 4g modem drivers/usb: add missing GENERIC_HARDIRQS dependencies USB: storage: properly handle the endian issues of idProduct testusb: remove all mentions of 'usbfs' usb: gadget: imx_udc: make it depend on BROKEN usb: omap_control_usb: fix compile warning ARM: OMAP: USB: Add phy binding information ARM: OMAP2: MUSB: Specify omap4 has mailbox ARM: OMAP: devices: create device for usb part of control module ...
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-20Merge tag 'pm+acpi-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: - Rework of the ACPI namespace scanning code from Rafael J. Wysocki with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg, Toshi Kani, and Yinghai Lu. - ACPI power resources handling and ACPI device PM update from Rafael J Wysocki. - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner. - Support for Intel Lynxpoint LPSS from Mika Westerberg. - cpuidle update from Len Brown including Intel Haswell support, C1 state for intel_idle, removal of global pm_idle. - cpuidle fixes and cleanups from Daniel Lezcano. - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with contributions from Stratos Karafotis and Rickard Andersson. - Intel P-states driver for Sandy Bridge processors from Dirk Brandewie. - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn. - cpufreq fixes related to ordering issues between acpi-cpufreq and powernow-k8 from Borislav Petkov and Matthew Garrett. - cpufreq support for Calxeda Highbank processors from Mark Langsdorf and Rob Herring. - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update from Shawn Guo. - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat, and Inderpal Singh. - Support for "lightweight suspend" from Zhang Rui. - Removal of the deprecated power trace API from Paul Gortmaker. - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki Ishimatsu. * tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle cpufreq / intel_pstate: Add kernel command line option disable intel_pstate. cpufreq / intel_pstate: Change to disallow module build tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E ACPI / hotplug: Fix concurrency issues and memory leaks ...
2013-02-20Merge tag 'pinctrl-for-v3.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl changes from Linus Walleij: "These are the main pinctrl changes for the v3.9 merge window. The most interesting change by far is how the device core grabs pinctrl default handles avoiding the need to stick boilerplate into driver consumers. - Grabbing of default pinctrl handles from the device core. These are the hunks hitting drivers/base. All is ACKed by Greg, after a long discussion about different alternatives. - Some stuff also touches the MFD and ARM SoC trees, this has been coordinated and ACKed. - New drivers for: - The Tegra 114 sub-SoC - Allwinner sunxi - New ABx500 driver and sub-SoC drivers for AB8500, AB8505, AB9540 and AB8540. - Make it possible for hogged pins to enter a sleep mode, and make it possible for drivers to control that mode. - Various clean-up, extensions and device tree support to various pin controllers." * tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (68 commits) pinctrl: tegra: add clfvs function to Tegra114 support pinctrl: generic: rename input schmitt disable pinctrl/pinconfig: add debug interface pinctrl: samsung: remove duplicated line ARM: ux500: use real AB8500 IRQ numbers instead of virtual ones ARM: ux500: remove irq_base property from platform_data pinctrl/abx500: use direct IRQ defines pinctrl/abx500: replace IRQ offsets with table read-in values pinctrl/abx500: move IRQ handling to ab8500-core pinctrl: exynos5440: remove erroneous __init pinctrl/abx500: adjust offset for get_mode() pinctrl/abx500: add Device Tree support pinctrl/abx500: align GPIO cluster boundaries pinctrl/abx500: prevent error path from corrupting returning error pinctrl: sunxi: add of_xlate function pinctrl/lantiq: fix pin number in ltq_pmx_gpio_request_enable pinctrl/lantiq: add functionality to falcon_pinconf_dbg_show pinctrl/lantiq: fix pinconfig parameters pinctrl/lantiq: one of the boot leds was defined incorrectly pinctrl/lantiq: only probe available pad controllers ...
2013-02-18base: memory: fix soft/hard_offline_page permissionsFelipe Balbi
those two sysfs files don't have a 'show' method, so they shouldn't have a read permission. Thanks to Greg Kroah-Hartman for actually looking into the source code and figuring out we had a real bug with these two files. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-15drivercore: Fix ordering between deferred_probe and exiting initcallsGrant Likely
One of the side effects of deferred probe is that some drivers which used to be probed before initcalls completed are now happening slightly later. This causes two problems. - If a console driver gets deferred, then it may not be ready when userspace starts. For example, if a uart depends on pinctrl, then the uart will get deferred and /dev/console will not be available - __init sections will be discarded before built-in drivers are probed. Strictly speaking, __init functions should not be called in a drivers __probe path, but there are a lot of drivers (console stuff again) that do anyway. In the past it was perfectly safe to do so because all built-in drivers got probed before the end of initcalls. This patch fixes the problem by forcing the first pass of the deferred list to complete at late_initcall time. This is late enough to catch the drivers that are known to have the above issues. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable <stable@vger.kernel.org> # 3.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-15Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (55 commits) cpufreq / intel_pstate: Fix 32 bit build cpufreq: conservative: Fix typos in comments cpufreq: ondemand: Fix typos in comments cpufreq: exynos: simplify .init() for setting policy->cpus cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs cpufreq/x86: Add P-state driver for sandy bridge. cpufreq_stats: do not remove sysfs files if frequency table is not present cpufreq: Do not track governor name for scaling drivers with internal governors. cpufreq: Only call cpufreq_out_of_sync() for driver that implement cpufreq_driver.target() cpufreq: Retrieve current frequency from scaling drivers with internal governors cpufreq: Fix locking issues cpufreq: Create a macro for unlock_policy_rwsem{read,write} cpufreq: Remove unused HOTPLUG_CPU code cpufreq: governors: Fix WARN_ON() for multi-policy platforms cpufreq: ondemand: Replace down_differential tuner with adj_up_threshold cpufreq / stats: Get rid of CPUFREQ_STATDEVICE_ATTR cpufreq: Don't check cpu_online(policy->cpu) cpufreq: add imx6q-cpufreq driver cpufreq: Don't remove sysfs link for policy->cpu cpufreq: Remove unnecessary use of policy->shared_type ...
2013-02-14Merge remote-tracking branch 'regmap/topic/no-bus' into regmap-nextMark Brown
2013-02-14Merge remote-tracking branch 'regmap/topic/mmio' into regmap-nextMark Brown
2013-02-14Merge remote-tracking branch 'regmap/topic/irq' into regmap-nextMark Brown
2013-02-14Merge remote-tracking branch 'regmap/topic/flat' into regmap-nextMark Brown
2013-02-14Merge remote-tracking branch 'regmap/topic/debugfs' into regmap-nextMark Brown
2013-02-14Merge remote-tracking branch 'regmap/topic/async' into regmap-nextMark Brown
2013-02-14Merge remote-tracking branch 'regmap/topic/24bit' into regmap-nextMark Brown
2013-02-14regmap: mmio: add register clock supportPhilipp Zabel
Some mmio devices have a dedicated interface clock that needs to be enabled to access their registers. This patch optionally enables a clock before accessing registers in the regmap_bus callbacks. I added (devm_)regmap_init_mmio_clk variants of the init functions that have an added clk_id string parameter. This is passed to clk_get to request the clock from the clk framework. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-11regmap: debugfs: Factor out debugfs_tot_len calc into a functionDimitris Papastamos
In preparation to support the regmap debugfs ranges functionality factor this code out to a separate function. We'll need to ensure that the value has been correctly calculated from two separate places in the code. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-11regmap: debugfs: Optimize seeking within blocks of registersDimitris Papastamos
Optimize this so that we can better guess where to start scanning from. We know the length of the register field format, therefore given the file pointer position align to the nearest register field and scan from there onwards. We round down in this calculation and we let the rest of the code figure out where to start scanning from. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-11regmap: debugfs: Add a `max_reg' member in struct regmap_debugfs_off_cacheDimitris Papastamos
We are keeping track of the maximum register as well, this will make things easier for us in sharing this code with the code implementing the register ranges functionality. It also simplifies a bit the calculations when looking for the relevant block:offset from within the cache. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-09PM: Introduce suspend state PM_SUSPEND_FREEZEZhang Rui
PM_SUSPEND_FREEZE state is a general state that does not need any platform specific support, it equals frozen processes + suspended devices + idle processors. Compared with PM_SUSPEND_MEMORY, PM_SUSPEND_FREEZE saves less power because the system is still in a running state. PM_SUSPEND_FREEZE has less resume latency because it does not touch BIOS, and the processors are in idle state. Compared with RTPM/idle, PM_SUSPEND_FREEZE saves more power as 1. the processor has longer sleep time because processes are frozen. The deeper c-state the processor supports, more power saving we can get. 2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get more power saving from the devices that does not have good RTPM support. This state is useful for 1) platforms that do not have STR, or have a broken STR. 2) platforms that have an extremely low power idle state, which can be used to replace STR. The following describes how PM_SUSPEND_FREEZE state works. 1. echo freeze > /sys/power/state 2. the processes are frozen. 3. all the devices are suspended. 4. all the processors are blocked by a wait queue 5. all the processors idles and enters (Deep) c-state. 6. an interrupt fires. 7. a processor is woken up and handles the irq. 8. if it is a general event, a) the irq handler runs and quites. b) goto step 4. 9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving, a) the irq handler runs and activate the wakeup source b) wakeup_source_activate() notifies the wait queue. c) system starts resuming from PM_SUSPEND_FREEZE 10. all the devices are resumed. 11. all the processes are unfrozen. 12. system is back to working. Known Issue: The wakeup of this new PM_SUSPEND_FREEZE state may behave differently from the previous suspend state. Take ACPI platform for example, there are some GPEs that only enabled when the system is in sleep state, to wake the system backk from S3/S4. But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE. This means we may lose some wake event. But on the other hand, as we do not disable all the Interrupts during PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are not available for S3/S4. The patches has been tested on an old Sony laptop, and here are the results: Average Power: 1. RPTM/idle for half an hour: 14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W 2. Freeze for half an hour: 11W, 10.4W, 9.4W, 11.3W 10.5W 3. RTPM/idle for three hours: 11.6W 4. Freeze for three hours: 10W 5. Suspend to Memory: 0.5~0.9W Average Resume Latency: 1. RTPM/idle with a black screen: (From pressing keyboard to screen back) Less than 0.2s 2. Freeze: (From pressing power button to screen back) 2.50s 3. Suspend to Memory: (From pressing power button to screen back) 4.33s >From the results, we can see that all the platforms should benefit from this patch, even if it does not have Low Power S0. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-08regmap: debugfs: Fix reading in register field unitsDimitris Papastamos
At the moment, if the length of the register field format is N bytes, we can only get anything meaningful back to userspace by providing a buffer that is N + 2 bytes large. Fix this so we that we only need to provide a buffer of N bytes. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-06driver-core: constify data for class_find_device()Michał Mirosław
All in-kernel users of class_find_device() don't really need mutable data for match callback. In two places (kernel/power/suspend_test.c, drivers/scsi/osd/osd_uld.c) this patch changes match callbacks to use const search data. The const is propagated to rtc_class_open() and power_supply_get_by_name() parameters. Note that there's a dev reference leak in suspend_test.c that's not touched in this patch. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-05regmap: spi: Handle allocation failures gracefullyMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-05regmap: Export regmap_async_complete()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-04regmap: Export regmap_async_complete_cbAxel Lin
This fixes below build error when CONFIG_REGMAP=y && CONFIG_REGMAP_SPI=m ERROR: "regmap_async_complete_cb" [drivers/base/regmap/regmap-spi.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-04regmap: include linux/sched.h to fix buildStephen Warren
This fixes: drivers/base/regmap/regmap.c: In function 'regmap_async_complete_cb': drivers/base/regmap/regmap.c:1656:3: error: 'TASK_NORMAL' undeclared (first use in this function) drivers/base/regmap/regmap.c:1656:3: note: each undeclared identifier is reported only once for each function it appears in drivers/base/regmap/regmap.c: In function 'regmap_async_complete': drivers/base/regmap/regmap.c:1688:2: error: 'TASK_UNINTERRUPTIBLE' undeclared (first use in this function) drivers/base/regmap/regmap.c:1688:2: error: implicit declaration of function 'schedule' An alternative might be to adjust linux/wait.h to include linux/sched.h, but since that hasn't been done before, I assume we're consciously avoiding doing that. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-04firmware: Ignore abort check when no user-helper is usedTakashi Iwai
FW_STATUS_ABORT can be set only during the user-helper invocation, thus we can ignore the check when CONFIG_HW_LOADER_USER_HELPER is disabled. Acked-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-04firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPERTakashi Iwai
By shuffling the code, reduce a few ifdefs in firmware_class.c. Also, firmware_buf fmt field is changed to is_pages_buf boolean for simplification. Acked-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-04firmware: Make user-mode helper optionalTakashi Iwai
This patch adds a new kconfig, CONFIG_FW_LOADER_USER_HELPER, and guards the user-helper codes in firmware_class.c with ifdefs. Yeah, yeah, there are lots of ifdefs in this patch. The further clean-up with code shuffling follows in the next. Acked-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-04firmware: Refactoring for splitting user-mode helper codeTakashi Iwai
Since 3.7 kernel, the firmware loader can read the firmware files directly, and the traditional user-mode helper is invoked only as a fallback. This seems working pretty well, and the next step would be to reduce the redundant user-mode helper stuff in future. This patch is a preparation for that: refactor the code for splitting user-mode helper stuff more easily. No functional change. Acked-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-04Driver core: treat unregistered bus_types as having no devicesBjorn Helgaas
A bus_type has a list of devices (klist_devices), but the list and the subsys_private structure that contains it are not initialized until the bus_type is registered with bus_register(). The panic/reboot path has fixups that look up devices in pci_bus_type. If we panic before registering pci_bus_type, the bus_type exists but the list does not, so mach_reboot_fixups() trips over a null pointer and panics again: mach_reboot_fixups pci_get_device .. bus_find_device(&pci_bus_type, ...) bus->p is NULL Joonsoo reported a problem when panicking before PCI was initialized. I think this patch should be sufficient to replace the patch he posted here: https://lkml.org/lkml/2012/12/28/75 ("[PATCH] x86, reboot: skip reboot_fixups in early boot phase") Reported-by: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-01PM / OPP: Export more symbols for module usageMark Langsdorf
Export cpufreq helpers in OPP to make the cpufreq-core0 and highbank-cpufreq drivers loadable as modules. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-01PM / OPP: switch exported symbols to GPL variantNishanth Menon
We are GPLV2 library, so be clear in the symbols exported as well. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-29regmap: spi: Support asynchronous I/O for SPIMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-29regmap: Add asynchronous I/O supportMark Brown
Some use cases like firmware download can transfer a lot of data in quick succession. With high speed buses these use cases can benefit from having multiple transfers scheduled at once since this allows the bus to minimise the delay between transfers. Support this by adding regmap_raw_write_async(), allowing raw transfers to be scheduled, and regmap_async_complete() to wait for them to finish. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-29regmap: Add "no-bus" option for regmap APIAndrey Smirnov
This commit adds provision for "no-bus" usage of the regmap API. In this configuration user can provide API with two callbacks 'reg_read' and 'reg_write' which are to be called when reads and writes to one of device's registers is performed. This is useful for devices that expose registers but whose register access sequence does not fit the 'bus' abstraction. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-27regmap: regmap: avoid spurious warning in regmap_read_debugfsRussell King
Gcc warns about the case where regmap_read_debugfs tries to walk an empty map->debugfs_off_cache list, which would results in uninitialized variable getting returned, if we hadn't checked the same condition just before that. After an originally suggested inferior patch from Arnd Bergmann, this is the solution that Russell King came up with, sidestepping the problem by merging the error case for an empty list with the normal path. Without this patch, building mxs_defconfig results in: drivers/base/regmap/regmap-debugfs.c: In function 'regmap_read_debugfs': drivers/base/regmap/regmap-debugfs.c:147:9: : warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized] Reported-by: Vincent Stehle <v-stehle@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-26Merge 3.8-rc5 into driver-core-nextGreg Kroah-Hartman
This resolves a gpio driver merge issue pointed out in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>