summaryrefslogtreecommitdiff
path: root/drivers/base
AgeCommit message (Collapse)Author
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs changes from Al Viro. "A lot of misc stuff. The obvious groups: * Miklos' atomic_open series; kills the damn abuse of ->d_revalidate() by NFS, which was the major stumbling block for all work in that area. * ripping security_file_mmap() and dealing with deadlocks in the area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in general. * ->encode_fh() switched to saner API; insane fake dentry in mm/cleancache.c gone. * assorted annotations in fs (endianness, __user) * parts of Artem's ->s_dirty work (jff2 and reiserfs parts) * ->update_time() work from Josef. * other bits and pieces all over the place. Normally it would've been in two or three pull requests, but signal.git stuff had eaten a lot of time during this cycle ;-/" Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the 'truncate_range' inode method was removed by the VM changes, the VFS update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due to sparse fix added twice, with other changes nearby). * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits) nfs: don't open in ->d_revalidate vfs: retry last component if opening stale dentry vfs: nameidata_to_filp(): don't throw away file on error vfs: nameidata_to_filp(): inline __dentry_open() vfs: do_dentry_open(): don't put filp vfs: split __dentry_open() vfs: do_last() common post lookup vfs: do_last(): add audit_inode before open vfs: do_last(): only return EISDIR for O_CREAT vfs: do_last(): check LOOKUP_DIRECTORY vfs: do_last(): make ENOENT exit RCU safe vfs: make follow_link check RCU safe vfs: do_last(): use inode variable vfs: do_last(): inline walk_component() vfs: do_last(): make exit RCU safe vfs: split do_lookup() Btrfs: move over to use ->update_time fs: introduce inode operation ->update_time reiserfs: get rid of resierfs_sync_super reiserfs: mark the superblock as dirty a bit later ...
2012-05-30i2c: Split I2C_M_NOSTART support out of I2C_FUNC_PROTOCOL_MANGLINGMark Brown
Since there are uses for I2C_M_NOSTART which are much more sensible and standard than most of the protocol mangling functionality (the main one being gather writes to devices where something like a register address needs to be inserted before a block of data) create a new I2C_FUNC_NOSTART for this feature and update all the users to use it. Also strengthen the disrecommendation of the protocol mangling while we're at it. In the case of regmap-i2c we remove the requirement for mangling as I2C_M_NOSTART is the only mangling feature which is being used. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-05-30mode_t whack-a-mole: ->is_visible() returns umode_t...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-29mm: fix off-by-one bug in print_nodes_state()Ryota Ozaki
/sys/devices/system/node/{online,possible} outputs a garbage byte because print_nodes_state() returns content size + 1. To fix the bug, the patch changes the use of cpuset_sprintf_cpulist to follow the use at other places, which is clearer and safer. This bug was introduced in v2.6.24 (commit bde631a51876: "mm: add node states sysfs class attributeS"). Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-25Merge tag 'tag-for-linus-3.5' of ↵Linus Torvalds
git://git.linaro.org/people/sumitsemwal/linux-dma-buf Pull dma-buf updates from Sumit Semwal: "Here's the first signed-tag pull request for dma-buf framework. It includes the following key items: - mmap support - vmap support - related documentation updates These are needed by various drivers to allow mmap/vmap of dma-buf shared buffers. Dave Airlie has some prime patches dependent on the vmap pull as well." * tag 'tag-for-linus-3.5' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf: dma-buf: add initial vmap documentation dma-buf: minor documentation fixes. dma-buf: add vmap interface dma-buf: mmap support
2012-05-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull CMA and ARM DMA-mapping updates from Marek Szyprowski: "These patches contain two major updates for DMA mapping subsystem (mainly for ARM architecture). First one is Contiguous Memory Allocator (CMA) which makes it possible for device drivers to allocate big contiguous chunks of memory after the system has booted. The main difference from the similar frameworks is the fact that CMA allows to transparently reuse the memory region reserved for the big chunk allocation as a system memory, so no memory is wasted when no big chunk is allocated. Once the alloc request is issued, the framework migrates system pages to create space for the required big chunk of physically contiguous memory. For more information one can refer to nice LWN articles: - 'A reworked contiguous memory allocator': http://lwn.net/Articles/447405/ - 'CMA and ARM': http://lwn.net/Articles/450286/ - 'A deep dive into CMA': http://lwn.net/Articles/486301/ - and the following thread with the patches and links to all previous versions: https://lkml.org/lkml/2012/4/3/204 The main client for this new framework is ARM DMA-mapping subsystem. The second part provides a complete redesign in ARM DMA-mapping subsystem. The core implementation has been changed to use common struct dma_map_ops based infrastructure with the recent updates for new dma attributes merged in v3.4-rc2. This allows to use more than one implementation of dma-mapping calls and change/select them on the struct device basis. The first client of this new infractructure is dmabounce implementation which has been completely cut out of the core, common code. The last patch of this redesign update introduces a new, experimental implementation of dma-mapping calls on top of generic IOMMU framework. This lets ARM sub-platform to transparently use IOMMU for DMA-mapping calls if one provides required IOMMU hardware. For more information please refer to the following thread: http://www.spinics.net/lists/arm-kernel/msg175729.html The last patch merges changes from both updates and provides a resolution for the conflicts which cannot be avoided when patches have been applied on the same files (mainly arch/arm/mm/dma-mapping.c)." Acked by Andrew Morton <akpm@linux-foundation.org>: "Yup, this one please. It's had much work, plenty of review and I think even Russell is happy with it." * 'for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: (28 commits) ARM: dma-mapping: use PMD size for section unmap cma: fix migration mode ARM: integrate CMA with DMA-mapping subsystem X86: integrate CMA with DMA-mapping subsystem drivers: add Contiguous Memory Allocator mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks mm: extract reclaim code from __alloc_pages_direct_reclaim() mm: Serialize access to min_free_kbytes mm: page_isolation: MIGRATE_CMA isolation functions added mm: mmzone: MIGRATE_CMA migration type added mm: page_alloc: change fallbacks array handling mm: page_alloc: introduce alloc_contig_range() mm: compaction: export some of the functions mm: compaction: introduce isolate_freepages_range() mm: compaction: introduce map_pages() mm: compaction: introduce isolate_migratepages_range() mm: page_alloc: remove trailing whitespace ARM: dma-mapping: add support for IOMMU mapper ARM: dma-mapping: use alloc, mmap, free from dma_ops ARM: dma-mapping: remove redundant code and do the cleanup ... Conflicts: arch/x86/include/asm/dma-mapping.h
2012-05-25dma-buf: minor documentation fixes.Sumit Semwal
Some minor inline documentation fixes for gaps resulting from new patches. Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2012-05-25dma-buf: add vmap interfaceDave Airlie
The main requirement I have for this interface is for scanning out using the USB gpu devices. Since these devices have to read the framebuffer on updates and linearly compress it, using kmaps is a major overhead for every update. v2: fix warn issues pointed out by Sylwester Nawrocki. v3: fix compile !CONFIG_DMA_SHARED_BUFFER and add _GPL for now Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Rob Clark <rob.clark@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2012-05-25dma-buf: mmap supportDaniel Vetter
Compared to Rob Clark's RFC I've ditched the prepare/finish hooks and corresponding ioctls on the dma_buf file. The major reason for that is that many people seem to be under the impression that this is also for synchronization with outstanding asynchronous processsing. I'm pretty massively opposed to this because: - It boils down reinventing a new rather general-purpose userspace synchronization interface. If we look at things like futexes, this is hard to get right. - Furthermore a lot of kernel code has to interact with this synchronization primitive. This smells a look like the dri1 hw_lock, a horror show I prefer not to reinvent. - Even more fun is that multiple different subsystems would interact here, so we have plenty of opportunities to create funny deadlock scenarios. I think synchronization is a wholesale different problem from data sharing and should be tackled as an orthogonal problem. Now we could demand that prepare/finish may only ensure cache coherency (as Rob intended), but that runs up into the next problem: We not only need mmap support to facilitate sw-only processing nodes in a pipeline (without jumping through hoops by importing the dma_buf into some sw-access only importer), which allows for a nicer ION->dma-buf upgrade path for existing Android userspace. We also need mmap support for existing importing subsystems to support existing userspace libraries. And a loot of these subsystems are expected to export coherent userspace mappings. So prepare/finish can only ever be optional and the exporter /needs/ to support coherent mappings. Given that mmap access is always somewhat fallback-y in nature I've decided to drop this optimization, instead of just making it optional. If we demonstrate a clear need for this, supported by benchmark results, we can always add it in again later as an optional extension. Other differences compared to Rob's RFC is the above mentioned support for mapping a dma-buf through facilities provided by the importer. Which results in mmap support no longer being optional. Note that this dma-buf mmap patch does _not_ support every possible insanity an existing subsystem could pull of with mmap: Because it does not allow to intercept pagefaults and shoot down ptes importing subsystems can't add some magic of their own at these points (e.g. to automatically synchronize with outstanding rendering or set up some special resources). I've done a cursory read through a few mmap implementions of various subsytems and I'm hopeful that we can avoid this (and the complexity it'd bring with it). Additonally I've extended the documentation a bit to explain the hows and whys of this mmap extension. In case we ever want to add support for explicitly cache maneged userspace mmap with a prepare/finish ioctl pair, we could specify that userspace needs to mmap a different part of the dma_buf, e.g. the range starting at dma_buf->size up to dma_buf->size*2. This works because the size of a dma_buf is invariant over it's lifetime. The exporter would obviously need to fall back to coherent mappings for both ranges if a legacy clients maps the coherent range and the architecture cannot suppor conflicting caching policies. Also, this would obviously be optional and userspace needs to be able to fall back to coherent mappings. v2: - Spelling fixes from Rob Clark. - Compile fix for !DMA_BUF from Rob Clark. - Extend commit message to explain how explicitly cache managed mmap support could be added later. - Extend the documentation with implementations notes for exporters that need to manually fake coherency. v3: - dma_buf pointer initialization goof-up noticed by Rebecca Schultz Zavin. Cc: Rob Clark <rob.clark@linaro.org> Cc: Rebecca Schultz Zavin <rebecca@android.com> Acked-by: Rob Clark <rob.clark@linaro.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2012-05-23Merge tag 'pm-for-3.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: - Implementation of opportunistic suspend (autosleep) and user space interface for manipulating wakeup sources. - Hibernate updates from Bojan Smojver and Minho Ban. - Updates of the runtime PM core and generic PM domains framework related to PM QoS. - Assorted fixes. * tag 'pm-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits) epoll: Fix user space breakage related to EPOLLWAKEUP PM / Domains: Make it possible to add devices to inactive domains PM / Hibernate: Use get_gendisk to verify partition if resume_file is integer format PM / Domains: Fix computation of maximum domain off time PM / Domains: Fix link checking when add subdomain PM / Sleep: User space wakeup sources garbage collector Kconfig option PM / Sleep: Make the limit of user space wakeup sources configurable PM / Documentation: suspend-and-cpuhotplug.txt: Fix typo PM / Domains: Cache device stop and domain power off governor results, v3 PM / Domains: Make device removal more straightforward PM / Sleep: Fix a mistake in a conditional in autosleep_store() epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready PM / QoS: Create device constraints objects on notifier registration PM / Runtime: Remove device fields related to suspend time, v2 PM / Domains: Rework default domain power off governor function, v2 PM / Domains: Rework default device stop governor function, v2 PM / Sleep: Add user space interface for manipulating wakeup sources, v3 PM / Sleep: Add "prevent autosleep time" statistics to wakeup sources PM / Sleep: Implement opportunistic sleep, v2 PM / Sleep: Add wakeup_source_activate and wakeup_source_deactivate tracepoints ...
2012-05-23Merge tag 'regmap-domain-deps' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull a regmap kconfig dependency fix from Mark Brown: "Fix the dependency on IRQ_DOMAIN for REGMAP_IRQ in the core Fixes a missing select from the Palmas driver a bit more throoughly." * tag 'regmap-domain-deps' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Use select .. if to get IRQ_DOMAIN enabled
2012-05-23regmap: Use select .. if to get IRQ_DOMAIN enabledMark Brown
Ensure that we can't get randconfig breakage by doing the IRQ_DOMAIN select automatically. Don't just do the select from REGMAP_IRQ to ensure that the select actually gets noticed. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-23Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "The biggest change is the cleanup/simplification of the load-balancer: instead of the current practice of architectures twiddling scheduler internal data structures and providing the scheduler domains in colorfully inconsistent ways, we now have generic scheduler code in kernel/sched/core.c:sched_init_numa() that looks at the architecture's node_distance() parameters and (while not fully trusting it) deducts a NUMA topology from it. This inevitably changes balancing behavior - hopefully for the better. There are various smaller optimizations, cleanups and fixlets as well" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Taint kernel with TAINT_WARN after sleep-in-atomic bug sched: Remove stale power aware scheduling remnants and dysfunctional knobs sched/debug: Fix printing large integers on 32-bit platforms sched/fair: Improve the ->group_imb logic sched/nohz: Fix rq->cpu_load[] calculations sched/numa: Don't scale the imbalance sched/fair: Revert sched-domain iteration breakage sched/x86: Rewrite set_cpu_sibling_map() sched/numa: Fix the new NUMA topology bits sched/numa: Rewrite the CONFIG_NUMA sched domain support sched/fair: Propagate 'struct lb_env' usage into find_busiest_group sched/fair: Add some serialization to the sched_domain load-balance walk sched/fair: Let minimally loaded cpu balance the group sched: Change rq->nr_running to unsigned int x86/numa: Check for nonsensical topologies on real hw as well x86/numa: Hard partition cpu topology masks on node boundaries x86/numa: Allow specifying node_distance() for numa=fake x86/sched: Make mwait_usable() heed to "idle=" kernel parameters properly sched: Update documentation and comments sched_rt: Avoid unnecessary dequeue and enqueue of pushable tasks in set_cpus_allowed_rt()
2012-05-22Merge tag 'driver-core-3.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here's the driver core, and other driver subsystems, pull request for the 3.5-rc1 merge window. Outside of a few minor driver core changes, we ended up with the following different subsystem and core changes as well, due to interdependancies on the driver core: - hyperv driver updates - drivers/memory being created and some drivers moved into it - extcon driver subsystem created out of the old Android staging switch driver code - dynamic debug updates - printk rework, and /dev/kmsg changes All of this has been tested in the linux-next releases for a few weeks with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed that a patch to the deleted drivers/misc/max8997-muic.c driver needs to be applied to this one. * tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits) uio_pdrv_genirq: get irq through platform resource if not set otherwise memory: tegra{20,30}-mc: Remove empty *_remove() printk() - isolate KERN_CONT users from ordinary complete lines sysfs: get rid of some lockdep false positives Drivers: hv: util: Properly handle version negotiations. Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp() memory: tegra{20,30}-mc: Use dev_err_ratelimited() driver core: Add dev_*_ratelimited() family Driver Core: don't oops with unregistered driver in driver_find_device() printk() - restore prefix/timestamp printing for multi-newline strings printk: add stub for prepend_timestamp() ARM: tegra30: Make MC optional in Kconfig ARM: tegra20: Make MC optional in Kconfig ARM: tegra30: MC: Remove unnecessary BUG*() ARM: tegra20: MC: Remove unnecessary BUG*() printk: correctly align __log_buf ARM: tegra30: Add Tegra Memory Controller(MC) driver ARM: tegra20: Add Tegra Memory Controller(MC) driver printk() - restore timestamp printing at console output printk() - do not merge continuation lines of different threads ...
2012-05-22Merge branch 'for-next-arm-dma' into for-linusMarek Szyprowski
Conflicts: arch/arm/Kconfig arch/arm/mm/dma-mapping.c Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-05-21drivers: add Contiguous Memory AllocatorMarek Szyprowski
The Contiguous Memory Allocator is a set of helper functions for DMA mapping framework that improves allocations of contiguous memory chunks. CMA grabs memory on system boot, marks it with MIGRATE_CMA migrate type and gives back to the system. Kernel is allowed to allocate only movable pages within CMA's managed memory so that it can be used for example for page cache when DMA mapping do not use it. On dma_alloc_from_contiguous() request such pages are migrated out of CMA area to free required contiguous block and fulfill the request. This allows to allocate large contiguous chunks of memory at any time assuming that there is enough free memory available in the system. This code is heavily based on earlier works by Michal Nazarewicz. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Rob Clark <rob.clark@linaro.org> Tested-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Tested-by: Robert Nelson <robertcnelson@gmail.com> Tested-by: Barry Song <Baohua.Song@csr.com>
2012-05-21common: add dma_mmap_from_coherent() functionMarek Szyprowski
Add a common helper for dma-mapping core for mapping a coherent buffer to userspace. Reported-by: Subash Patel <subashrp@gmail.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-By: Subash Patel <subash.ramaswamy@linaro.org>
2012-05-18Merge branch 'pm-domains'Rafael J. Wysocki
* pm-domains: PM / Domains: Make it possible to add devices to inactive domains
2012-05-18PM / Domains: Make it possible to add devices to inactive domainsRafael J. Wysocki
The generic PM domains core code currently requires domains to be in the "power on" state for adding devices to them, but this limitation turns out to be inconvenient in some situations, so remove it. For this purpose, make __pm_genpd_add_device() set the device's need_restore flag if the domain is in the "power off" state, so that the device's "restore state" (usually .runtime_resume()) callback is executed when it is resumed after the domain has been turned on. If the domain is in the "power on" state, the device's need_restore flag will be cleared by __pm_genpd_add_device(), so that its "save state" (usually .runtime_suspend()) callback is executed when the domain is about to be turned off. However, since that default behavior need not be always desirable, add a helper function pm_genpd_dev_need_restore() allowing a device's need_restore flag to be set/unset at any time. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-17regmap: Fix typo in IRQ register stridingMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-17sched: Remove stale power aware scheduling remnants and dysfunctional knobsPeter Zijlstra
It's been broken forever (i.e. it's not scheduling in a power aware fashion), as reported by Suresh and others sending patches, and nobody cares enough to fix it properly ... so remove it to make space free for something better. There's various problems with the code as it stands today, first and foremost the user interface which is bound to topology levels and has multiple values per level. This results in a state explosion which the administrator or distro needs to master and almost nobody does. Furthermore large configuration state spaces aren't good, it means the thing doesn't just work right because it's either under so many impossibe to meet constraints, or even if there's an achievable state workloads have to be aware of it precisely and can never meet it for dynamic workloads. So pushing this kind of decision to user-space was a bad idea even with a single knob - it's exponentially worse with knobs on every node of the topology. There is a proposal to replace the user interface with a single 3 state knob: sched_balance_policy := { performance, power, auto } where 'auto' would be the preferred default which looks at things like Battery/AC mode and possible cpufreq state or whatever the hw exposes to show us power use expectations - but there's been no progress on it in the past many months. Aside from that, the actual implementation of the various knobs is known to be broken. There have been sporadic attempts at fixing things but these always stop short of reaching a mergable state. Therefore this wholesale removal with the hopes of spurring people who care to come forward once again and work on a coherent replacement. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1326104915.2442.53.camel@twins Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-14regmap: add support for non contiguous status to regmap-irqGraeme Gregory
In some chips the IRQ status registers are not contiguous in the register map but spaced at even spaces. This is an easy case to handle with minor changes. It is assume for this purpose that the stride for status is equal to the stride for mask/ack registers as well. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14Driver Core: don't oops with unregistered driver in driver_find_device()Hiroshi DOYU
driver_find_device() can be called with an unregistered driver. Need to check driver_private to see if it's populated or not, especially under deferrable probe. In the case that there are 2 drivers, one depends on the other. With -EPROBE_DEFER, two drivers can use deferred probe to ensure that their relative probe order doesn't matter. If dependee driver is probed first, then the dependant's driver_find_device('dependee') succeeds. If the dependant is probed first, then the dependant's driver_find_device('dependee') should return NULL, and the dependant should get -EPROBE_DEFER. driver_find_device() needs to return NULL if it's not populated. In [PATCHv5 2/3] ARM: tegra: Add SMMU enabler in AHB: http://article.gmane.org/gmane.linux.ports.tegra/4658 "tegra_ahb_driver" may not be populated when it's called. For more SMMU/AHB specific discussion, refer to the following thread: https://lkml.org/lkml/2012/5/10/21 Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-13regmap: Convert regmap_irq to use irq_domainMark Brown
This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13Merge branches 'regmap-core', 'regmap-stride', 'regmap-mmio' and ↵Mark Brown
'regmap-irq' into regmap-next
2012-05-13regmap: Pass back the allocated regmap IRQ controller dataMark Brown
It's needed for freeing and for obtaining the IRQ base later on. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-12Merge tag 'regmap-3.4' into regmap-strideMark Brown
regmap: Last minute bug fix for 3.4 This is a last minute bug fix that was only just noticed since the code path that's being exercised here is one that is fairly rarely used. The changelog for the change itself is extremely clear and the code itself is obvious to inspection so should be pretty safe. Conflicts: drivers/base/regmap/regmap.c (overlap between the fix and stride code)
2012-05-11Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: PM / Sleep: User space wakeup sources garbage collector Kconfig option PM / Sleep: Make the limit of user space wakeup sources configurable PM / Documentation: suspend-and-cpuhotplug.txt: Fix typo PM / Sleep: Fix a mistake in a conditional in autosleep_store() epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready PM / Sleep: Add user space interface for manipulating wakeup sources, v3 PM / Sleep: Add "prevent autosleep time" statistics to wakeup sources PM / Sleep: Implement opportunistic sleep, v2 PM / Sleep: Add wakeup_source_activate and wakeup_source_deactivate tracepoints PM / Sleep: Change wakeup source statistics to follow Android PM / Sleep: Use wait queue to signal "no wakeup events in progress" PM / Sleep: Look for wakeup events in later stages of device suspend PM / Hibernate: Hibernate/thaw fixes/improvements
2012-05-11PM / Domains: Fix computation of maximum domain off timeRafael J. Wysocki
The default domain power off governor function for generic PM domains, default_power_down_ok(), may violate subdomain maximum off time limit by allowing the master domain to be off for too long. Namely, it only finds the minium of all device maximum off times over the domain's devices and uses that to compute the domain's maximum off time, but it should do the same for the subdomains. Fix this problem by modifying default_power_down_ok() to compute the given domain's maximum off time as the difference between the minimum off time over all devices and subdomains in the domain and its power on latency. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-11PM / Domains: Fix link checking when add subdomainHuang Ying
Current pm_genpd_add_subdomain() will allow duplicated link between master and slave domain. This patch fixed it. Because when current pm_genpd_add_subdomain() checks whether the link between the master and slave generic PM domain already exists, slave_links instead of master_links of master domain is used. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-09regmap: fix possible memory corruption in regmap_bulk_read()Laxman Dewangan
The function regmap_bulk_read() calls the regmap_read() for each register if set of register has volatile and cache is enabled. In this case, last few register read makes the memory corruption if the register size is not the size of unsigned int. The regam_read() takes argument as unsigned int for returning value and it update the value as *val = map->format.parse_val(map->work_buf); This causes complete 4 bytes (size of unsigned int) to get written. Now if client pass the memory pointer for value which is equal to the required size of register count in regmap_bulk_read() then last few register read actually update the memory beyond passed pointer size. Avoid this by using local variable for read and then do memcpy() for actual byte copy to passed pointer based on register size. I allocated one pointer ptr and take first 16 bytes dump of that pointer then call regmap_bulk_read() with pointer which is just on top of this allocated pointer and register count of 128. Here register size is 1 byte. The memory trace of last 5 register read are as follows: [ 5.438589] regmap_bulk_read after regamp_read() for register 122 [ 5.447421] 0xef993c20 0xef993c00 0x00000000 0x00000001 [ 5.467535] regmap_bulk_read after regamp_read() for register 123 [ 5.476374] 0xef993c20 0xef993c00 0x00000000 0x00000001 [ 5.496425] regmap_bulk_read after regamp_read() for register 124 [ 5.505260] 0xef993c20 0xef993c00 0x00000000 0x00000001 [ 5.525372] regmap_bulk_read after regamp_read() for register 125 [ 5.534205] 0xef993c00 0xef993c00 0x00000000 0x00000001 [ 5.554258] regmap_bulk_read after regamp_read() for register 126 [ 5.563100] 0xef990000 0xef993c00 0x00000000 0x00000001 [ 5.554258] regmap_bulk_read after regamp_read() for register 127 [ 5.587108] 0xef000000 0xef993c00 0x00000000 0x00000001 Here it is observed that the memory content at first word started changing on last 3 regmap_read() and so corruption happened. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-08regmap: Implement dev_get_regmap()Mark Brown
Use devres to implement dev_get_regmap(). This should mean that in almost all cases devices wishing to take advantage of framework features based on regmap shouldn't need to explicitly pass the regmap into the framework. This simplifies device setup a bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-08driver-core: extend dev_printk() to pass structured dataKay Sievers
Extends dev_printk() to attach a dictionary with a device identifier and the driver core subsystem name to logged messages, which makes dev_prink() reliable machine-readable. In addition to the printed plain text message, it creates these properties: SUBSYSTEM= - the driver-core subsytem name DEVICE= b12:8 - block dev_t c127:3 - char dev_t n8 - netdev ifindex +sound:card0 - subsystem:devname Tested-by: William Douglas <william.douglas@intel.com> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-05PM / Domains: Cache device stop and domain power off governor results, v3Rafael J. Wysocki
The results of the default device stop and domain power off governor functions for generic PM domains, default_stop_ok() and default_power_down_ok(), depend only on the timing data of devices, which are static, and on their PM QoS constraints. Thus, in theory, these functions only need to carry out their computations, which may be time consuming in general, when it is known that the PM QoS constraint of at least one of the devices in question has changed. Use the PM QoS notifiers of devices to implement that. First, introduce new fields, constraint_changed and max_off_time_changed, into struct gpd_timing_data and struct generic_pm_domain, respectively, and register a PM QoS notifier function when adding a device into a domain that will set those fields to 'true' whenever the device's PM QoS constraint is modified. Second, make default_stop_ok() and default_power_down_ok() use those fields to decide whether or not to carry out their computations from scratch. The device and PM domain hierarchies are taken into account in that and the expense is that the changes of PM QoS constraints of suspended devices will not be taken into account immediately, which isn't guaranteed anyway in general. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-05PM / Domains: Make device removal more straightforwardRafael J. Wysocki
The removal of a device from a PM domain doesn't have to browse the domain's device list, because it can check directly if the device belongs to the given domain. Moreover, it should clear the domain_data pointer in dev->power.subsys_data, because dev_pm_put_subsys_data(dev) may not remove dev->power.subsys_data and the stale domain data pointer may cause problems to happen. Rework pm_genpd_remove_device() taking the above observations into account. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-04devres: Add devres_release()Mark Brown
APIs using devres frequently want to implement a "remove and free the resource" operation so it seems sensible that they should be able to just have devres do the freeing for them since that's a big part of what devres is all about. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04devres: Clarify documentation for devres_destroy()Mark Brown
It's not massively obvious (at least to me) that removing and freeing a resource does not involve calling the release function for the resource but rather only removes the management of it. Make the documentation more explicit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02Merge 3.4-rc5 into driver-core-nextGreg Kroah-Hartman
This was done to resolve a merge issue with the init/main.c file. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01PM / QoS: Create device constraints objects on notifier registrationRafael J. Wysocki
The current behavior of dev_pm_qos_add_notifier() makes device PM QoS notifiers less than useful. Namely, it silently returns success when called before any PM QoS constraints are added for the device, so the caller will assume that the notifier has been registered, but when someone actually adds some nontrivial constraints for the device eventually, the previous callers of dev_pm_qos_add_notifier() will not know about that and their notifier routines will not be executed (contrary to their expectations). To address this problem make dev_pm_qos_add_notifier() create the constraints object for the device if it is not present when the routine is called. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by : markgross <markgross@thegnar.org>
2012-05-01PM / Runtime: Remove device fields related to suspend time, v2Rafael J. Wysocki
After the previous changes in default_stop_ok() and default_power_down_ok() for PM domains, there are two fields in struct dev_pm_info that aren't necessary any more, suspend_time and max_time_suspended_ns. Remove those fields along with all of the code that accesses them, which simplifies the runtime PM framework quite a bit. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-01PM / Domains: Rework default domain power off governor function, v2Rafael J. Wysocki
The existing default domain power down governor function for PM domains, default_power_down_ok(), is supposed to check whether or not the PM QoS latency constraints of the devices in the domain will be violated if the domain is turned off by pm_genpd_poweroff(). However, the computations carried out by it don't reflect the definition of the PM QoS latency constrait in Documentation/ABI/testing/sysfs-devices-power. Make default_power_down_ok() follow the definition of the PM QoS latency constrait. In particular, make it only take latencies into account, because it doesn't matter how much time has elapsed since the domain's devices were suspended for the computation. Remove the break_even_ns and power_off_time fields from struct generic_pm_domain, because they are not necessary any more. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-01PM / Domains: Rework default device stop governor function, v2Rafael J. Wysocki
The existing default device stop governor function for PM domains, default_stop_ok(), is supposed to check whether or not the device's PM QoS latency constraint will be violated if the device is stopped by pm_genpd_runtime_suspend(). However, the computations carried out by it don't reflect the definition of the PM QoS latency constrait in Documentation/ABI/testing/sysfs-devices-power. Make default_stop_ok() follow the definition of the PM QoS latency constrait. In particular, make it take the device's start and stop latencies correctly. Add a new field, effective_constraint_ns, to struct gpd_timing_data and use it to store the difference between the device's PM QoS constraint and its resume latency for use by the device's parent (the effective_constraint_ns values for the children are used for computing the parent's one along with its PM QoS constraint). Remove the break_even_ns field from struct gpd_timing_data, because it's not used any more. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-01PM / Sleep: Add user space interface for manipulating wakeup sources, v3Rafael J. Wysocki
Android allows user space to manipulate wakelocks using two sysfs file located in /sys/power/, wake_lock and wake_unlock. Writing a wakelock name and optionally a timeout to the wake_lock file causes the wakelock whose name was written to be acquired (it is created before is necessary), optionally with the given timeout. Writing the name of a wakelock to wake_unlock causes that wakelock to be released. Implement an analogous interface for user space using wakeup sources. Add the /sys/power/wake_lock and /sys/power/wake_unlock files allowing user space to create, activate and deactivate wakeup sources, such that writing a name and optionally a timeout to wake_lock causes the wakeup source of that name to be activated, optionally with the given timeout. If that wakeup source doesn't exist, it will be created and then activated. Writing a name to wake_unlock causes the wakeup source of that name, if there is one, to be deactivated. Wakeup sources created with the help of wake_lock that haven't been used for more than 5 minutes are garbage collected and destroyed. Moreover, there can be only WL_NUMBER_LIMIT wakeup sources created with the help of wake_lock present at a time. The data type used to track wakeup sources created by user space is called "struct wakelock" to indicate the origins of this feature. This version of the patch includes an rbtree manipulation fix from John Stultz. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NeilBrown <neilb@suse.de>
2012-05-01PM / Sleep: Add "prevent autosleep time" statistics to wakeup sourcesRafael J. Wysocki
Android uses one wakelock statistics that is only necessary for opportunistic sleep. Namely, the prevent_suspend_time field accumulates the total time the given wakelock has been locked while "automatic suspend" was enabled. Add an analogous field, prevent_sleep_time, to wakeup sources and make it behave in a similar way. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01PM / Sleep: Implement opportunistic sleep, v2Rafael J. Wysocki
Introduce a mechanism by which the kernel can trigger global transitions to a sleep state chosen by user space if there are no active wakeup sources. It consists of a new sysfs attribute, /sys/power/autosleep, that can be written one of the strings returned by reads from /sys/power/state, an ordered workqueue and a work item carrying out the "suspend" operations. If a string representing the system's sleep state is written to /sys/power/autosleep, the work item triggering transitions to that state is queued up and it requeues itself after every execution until user space writes "off" to /sys/power/autosleep. That work item enables the detection of wakeup events using the functions already defined in drivers/base/power/wakeup.c (with one small modification) and calls either pm_suspend(), or hibernate() to put the system into a sleep state. If a wakeup event is reported while the transition is in progress, it will abort the transition and the "system suspend" work item will be queued up again. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NeilBrown <neilb@suse.de>
2012-05-01PM / Sleep: Add wakeup_source_activate and wakeup_source_deactivate tracepointsArve Hjønnevåg
Add tracepoints to wakeup_source_activate and wakeup_source_deactivate. Useful for checking that specific wakeup sources overlap as expected. Signed-off-by: Arve Hjønnevåg <arve@android.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-01PM / Sleep: Change wakeup source statistics to follow AndroidRafael J. Wysocki
Wakeup statistics used by Android are slightly different from what we have in wakeup sources at the moment and there aren't any known users of those statistics other than Android, so modify them to make it easier for Android to switch to wakeup sources. This removes the struct wakeup_source's hit_cout field, which is very rough and therefore not very useful, and adds two new fields, wakeup_count and expire_count. The first one tracks how many times the wakeup source is activated with events_check_enabled set (which roughly corresponds to the situations when a system power transition to a sleep state is in progress and would be aborted by this wakeup source if it were the only active one at that time) and the second one is the number of times the wakeup source has been activated with a timeout that expired. Additionally, the last_time field is now updated when the wakeup source is deactivated too (previously it was only updated during the wakeup source's activation), which seems to be what Android does with the analogous counter for wakelocks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01PM / Sleep: Use wait queue to signal "no wakeup events in progress"Rafael J. Wysocki
The current wakeup source deactivation code doesn't do anything when the counter of wakeup events in progress goes down to zero, which requires pm_get_wakeup_count() to poll that counter periodically. Although this reduces the average time it takes to deactivate a wakeup source, it also may lead to a substantial amount of unnecessary polling if there are extended periods of wakeup activity. Thus it seems reasonable to use a wait queue for signaling the "no wakeup events in progress" condition and remove the polling. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: mark gross <markgross@thegnar.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01PM / Sleep: Look for wakeup events in later stages of device suspendRafael J. Wysocki
Currently, the device suspend code in drivers/base/power/main.c only checks if there have been any wakeup events, and therefore the ongoing system transition to a sleep state should be aborted, during the first (i.e. "suspend") device suspend phase. However, wakeup events may be reported later as well, so it's reasonable to look for them in the in the subsequent (i.e. "late suspend" and "suspend noirq") phases. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30regmap: Devices using format_write don't support bulk operationsMark Brown
Set the use_single_rw flag for devices that use format_write() since format_write() doesn't support any form of block operation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>