summaryrefslogtreecommitdiff
path: root/drivers/bluetooth
AgeCommit message (Collapse)Author
2013-11-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
2013-10-11Bluetooth: Declare ath3k_table[] and ath3k_blist_tbl[] as constMarcel Holtmann
The ath3k_table[] and ath3k_blist_tbl[] USB device tables can be declared as const. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Declare bpa10x_table[] as constMarcel Holtmann
The bpa10x_table[] device table can be declared as const Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Declare bfusb_table[] as constMarcel Holtmann
The bfusb_table[] device table can be declared as const Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Declare btusb_table[] and blacklist_table[] as constMarcel Holtmann
The btusb_table[] and blacklist_table[] USB device tables can be declared as const. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Remove pointless parameter check in vhci_send_frame()Marcel Holtmann
The hdev parameter of vhci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Remove pointless parameter check in hci_uart_send_frame()Marcel Holtmann
The hdev parameter of hci_uart_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Remove pointless parameter check in dtl1_hci_send_frame()Marcel Holtmann
The hdev parameter of dtl1_hci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Remove pointless parameter check in btuart_hci_send_frame()Marcel Holtmann
The hdev parameter of btuart_hci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Remove pointless parameter check in btmrvl_send_frame()Marcel Holtmann
The hdev parameter of btmrvl_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Remove pointless parameter check in bt3c_hci_send_frame()Marcel Holtmann
The hdev parameter of bt3c_hci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Remove pointless parameter check in bluecard_hci_send_frame()Marcel Holtmann
The hdev parameter of bluecard_hci_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Remove pointless parameter check in bfusb_send_frame()Marcel Holtmann
The hdev parameter of bfusb_send_frame() is always valid. If it were not valid, then it would have crashed earlier in the call chain. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Add hdev parameter to hdev->send driver callbackMarcel Holtmann
Instead of masking hdev inside the skb->dev parameter, hand it directly to the driver as a parameter to hdev->send. This makes the driver interface more clear and simpler. This patch fixes all drivers to accept and handle the new parameter of hdev->send callback. Special care has been taken for bpa10x and btusb drivers that require having skb->dev set to hdev for the URB transmit complete handlers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Provide hdev parameter to hci_recv_frame() driver callbackMarcel Holtmann
To avoid casting skb->dev into hdev, just let the drivers provide the hdev directly when calling hci_recv_frame() function. This patch also fixes up all drivers to provide the hdev. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Remove unused h4_check_data_len() functionMarcel Holtmann
The function h4_check_data_len() is actually not used. So just remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-10Bluetooth: Remove unused btmrvl_ioctl() callbackMarcel Holtmann
The btmrvl_ioctl() function is not used and thus remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-10Bluetooth: Remove unused dtl1_hci_ioctl() callbackMarcel Holtmann
The dtl1_hci_ioctl() function is not used and thus remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-10Bluetooth: Remove unused btuart_hci_ioctl() callbackMarcel Holtmann
The btuart_hci_ioctl() function is not used and thus remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-10Bluetooth: Remove unused bt3c_hci_ioctl() callbackMarcel Holtmann
The bt3c_hci_ioctl() function is not used and thus remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-10Bluetooth: Remove unused bluecard_hci_ioctl() callbackMarcel Holtmann
The bluecard_hci_ioctl() function is not used and thus remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-10Bluetooth: Remove unused bfusb_ioctl() callbackMarcel Holtmann
The bfusb_ioctl() function is not used and thus remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-10Bluetooth: Use hci_conn_num() instead of direct connection hash accessMarcel Holtmann
When changing the alternate setting for the ISOC endpoints, use the hci_conn_num() helper function to count currently established SCO and eSCO connections and store the the value. This avoids direct access to the connection hash. In addition use the stored value instead accessing the connection hash over and over again. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-02Bluetooth: revert: "Bluetooth: Add missing reset_resume dev_pm_ops"Hans de Goede
Many btusb devices have 2 modes, a hid mode and a bluetooth hci mode. These devices default to hid mode for BIOS use. This means that after having been reset they will revert to HID mode, and are no longer usable as a HCI. Therefor it is a very bad idea to just blindly make reset_resume point to the regular resume handler. Note that the btusb driver has no clue how to switch these devices from hid to hci mode, this is done in userspace through udev rules, so the proper way to deal with this is to not have a reset-resume handler and instead let the usb-system re-enumerate the device, and re-run the udev rules. I must also note, that the commit message for the commit causing this problem has a very weak motivation for the change: "Add missing reset_resume dev_pm_ops. Missing reset_resume results in the following message after power management device test. This change sets reset_resume to btusb_resume(). [ 2506.936134] btusb 1-1.5:1.0: no reset_resume for driver btusb? [ 2506.936137] btusb 1-1.5:1.1: no reset_resume for driver btusb?" Making a change solely to silence a warning while also changing important behavior (normal resume handling versus re-enumeration) requires a commit message with a proper explanation why it is safe to do so, which clearly lacks here, and unsurprisingly it turns out to not be safe to make this change. Reverting the commit in question fixes bt no longer working on my Dell E6430 after a suspend/resume, and I believe it likely also fixes the following bugs: https://bugzilla.redhat.com/show_bug.cgi?id=988481 https://bugzilla.redhat.com/show_bug.cgi?id=1010649 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1213239 This reverts commit 502f769662978a2fe99d0caed5e53e3006107381. Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-10-02Bluetooth: btmrvl: add calibration data download supportAmitkumar Karwar
A text file containing calibration data in hex format can be provided at following path: /lib/firmware/mrvl/sd8797_caldata.conf The data will be downloaded to firmware during initialization. Reviewed-by: Mike Frysinger <vapier@chromium.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Hyuckjoo Lee <hyuckjoo.lee@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02Bluetooth: btmrvl: add setup handlerAmitkumar Karwar
Move initialization code to hdev's setup handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02Bluetooth: btmrvl: get rid of struct btmrvl_cmdAmitkumar Karwar
Replace this proprietary structure with the standard one (struct hci_command_hdr). Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02Bluetooth: btmrvl: add btmrvl_send_sync_cmd() functionAmitkumar Karwar
Command preparation code is used multiple times. This patch separate out this common code and create btmrvl_send_sync_cmd() function. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02Bluetooth: Enable -D__CHECK_ENDIAN__ for sparse by defaultMarcel Holtmann
The Bluetooth protocol and hardware is pretty much all little endian and so when running sparse via "make C=2" for example, enable the endian checks by default. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-09-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothGustavo Padovan
Conflicts: net/bluetooth/hci_core.c
2013-09-23Bluetooth: btusb: Add support for Belkin F8065bfKen O'Brien
Add generic rule on encountering Belkin bluetooth usb device F8065bf. Relevant section from /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=050d ProdID=065a Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=0002723E2D29 C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms Signed-off-by: Ken O'Brien <kernel@kenobrien.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-16Bluetooth: Add support for BCM20702A0 [0b05, 17cb]Raphael Kubo da Costa
Yet another vendor specific ID for this chipset; this one for the ASUS USB-BT400 Bluetooth 4.0 adapter. T: Bus=03 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=17cb Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=000272C64400 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Cc: stable@vger.kernel.org Signed-off-by: Raphael Kubo da Costa <rakuco@FreeBSD.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-16Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012.Peng Chen
usb device info: T: Bus=06 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 15 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e005 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms Cc: Stable <stable@vger.kernel.org> Signed-off-by: Peng Chen <pengchen@qca.qualcomm.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-16Bluetooth: Add support creating virtual AMP controllersMarcel Holtmann
So far the only option to create a virtual AMP controller was by setting a module parameter for the hci_vhci driver. This patch adds the functionality to define inline to create either a BR/EDR or an AMP controller. In addition the client will be informed which HCI controller index it got assigned. That is especially useful for automated end-to-end testing. To keep backwards compatibility with existing userspace, the command for creating a controller type needs to be send right after opening the device node. If the command is not send, it defaults back to automatically creating a BR/EDR controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-16Bluetooth: Use devname:vhci module alias for virtual HCI driverMarcel Holtmann
To allow creating /dev/vhci device node, add the proper module alias for this driver. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2013-08-21Bluetooth: use DIV_ROUND_UP in suitable places in btmrvl_sdioAndy Shevchenko
There are two places where DIV_ROUND_UP may be used. It makes code a bit clearer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-31Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Conflicts: net/bluetooth/hci_core.c
2013-07-25Bluetooth: Add support for Atheros [0cf3:e003]AceLan Kao
Add support for the AR9462 chip T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e003 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Cc: Stable <stable@vger.kernel.org> Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: Add support for Atheros [0cf3:3121]AceLan Kao
Add support for the AR3012 chip. T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=3121 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: ath3k: Add support for ID 0x13d3/0x3402Sujith Manoharan
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3402 Rev= 0.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Bug: https://bugzilla.kernel.org/show_bug.cgi?id=59701 Signed-off-by: Sujith Manoharan <sujith@msujith.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: fix wrong use of PTR_ERR() in btusbAdam Lee
PTR_ERR() returns a signed long type value which is limited by IS_ERR(), it must be a negative number whose range is [-MAX_ERRNO, 0). The bug here returns negative numbers as error codes, then check it by "if (ret < 0)", but -PTR_ERR() is actually positive. The wrong use here leads to failure as below, even panic. [ 12.958920] Bluetooth: hci0 command 0xfc8e tx timeout [ 14.961765] Bluetooth: hci0 command 0xfc8e tx timeout [ 16.964688] Bluetooth: hci0 command 0xfc8e tx timeout [ 20.954501] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 22.957358] Bluetooth: hci0 command 0xfc8e tx timeout [ 30.948922] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 32.951780] Bluetooth: hci0 command 0xfc8e tx timeout [ 40.943359] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 42.946219] Bluetooth: hci0 command 0xfc8e tx timeout [ 50.937812] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 52.940670] Bluetooth: hci0 command 0xfc8e tx timeout [ 60.932236] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 62.935092] Bluetooth: hci0 command 0xfc8e tx timeout [ 70.926688] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 72.929545] Bluetooth: hci0 command 0xfc8e tx timeout [ 80.921111] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 82.923969] Bluetooth: hci0 command 0xfc2f tx timeout [ 90.915542] Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110) [ 92.918406] Bluetooth: hci0 command 0xfc11 tx timeout [ 100.909955] Bluetooth: hci0 sending Intel patch command (0xfc11) failed (-110) [ 102.912858] Bluetooth: hci0 command 0xfc60 tx timeout [ 110.904394] Bluetooth: hci0 sending Intel patch command (0xfc60) failed (-110) [ 112.907293] Bluetooth: hci0 command 0xfc11 tx timeout [ 120.898831] Bluetooth: hci0 exiting Intel manufacturer mode failed (-110) [ 120.904757] bluetoothd[1030]: segfault at 4 ip 00007f8b2eb55236 sp 00007fff53ff6920 error 4 in bluetoothd[7f8b2eaff000+cb000] Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: ath3k: don't use stack memory for DMAStanislaw Gruszka
Memory allocated by vmalloc (including stack) can not be used for DMA, i.e. data pointer on usb_control_msg() should not point to stack memory. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=977558 Reported-and-tested-by: Andy Lawrence <dr.diesel@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: ath3k: Add support for Fujitsu Lifebook UH5x2 [04c5:1330]Thomas Loo
The Fujitsu Lifebook UH552/UH572 ships with a Qualcomm AR9462/AR3012 WLAN/BT-Combo card. Add device ID to the ath3k driver to enable the bluetooth side of things. Patch against v3.10. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04c5 ProdID=1330 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Thomas Loo <tloo@saltstorm.net> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-07-25Bluetooth: replace strict_strtol() with kstrtol()Jingoo Han
The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-06-22Bluetooth: Add missing reset_resume dev_pm_opsShuah Khan
Add missing reset_resume dev_pm_ops. Missing reset_resume results in the following message after power management device test. This change sets reset_resume to btusb_resume(). [ 2506.936134] btusb 1-1.5:1.0: no reset_resume for driver btusb? [ 2506.936137] btusb 1-1.5:1.1: no reset_resume for driver btusb? Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-06-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-06-13Bluetooth: btmrvl: fix error return code in btmrvl_sdio_card_to_host()Wei Yongjun
Fix to return -ENOMEM in the skb alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-13Bluetooth: Add support for Mediatek Bluetooth device [0e8d:763f]Cho, Yu-Chen
This patch adds support for Mediatek Bluetooth device T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=763f Rev= 1.00 S: Manufacturer=MediaTek S: Product=BT S: SerialNumber=1.0 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=450mA A: FirstIf#= 0 IfCount= 2 Cls=ff(vend.) Sub=ff Prot=ff I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Cho, Yu-Chen <acho@suse.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-13Bluetooth: btmrvl: fix thread stopping raceDaniel Drake
There is currently a race condition in the btmrvl_remove_card() which is causing hangs on suspend for OLPC. When the race occurs, kthread_stop() never returns. The problem is that btmrvl_service_main_thread() calls kthread_should_stop() and then does a fair number of things before restarting the loop and sleeping. If the thread gets stopped after kthread_should_stop() is checked, but before the sleep happens, the thread will go to sleep and won't necessarily be woken up. Move the kthread_should_stop() check into a race-free place. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-11-11 16:26:56 (GMT)