Age | Commit message (Collapse) | Author |
|
For cases where offset/length of on any page of the input SG is not aligned by
AES_BLOCK_SIZE, we copy all the pages from the input SG list into a contiguous
buffer and prepare a single element SG list for this buffer with length as the
total bytes to crypt.
This is requried for cases such as when an SG list of 16 bytes total size
contains 16 pages each containing 1 byte. DMA using the direct buffers of such
instances is not possible.
For this purpose, we first detect if the unaligned case and accordingly
allocate enough number of pages to satisfy the request and prepare SG lists.
We then copy data into the buffer, and copy data out of it on completion.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In cases where requesting for DMA channels fails for some reason, or channel
numbers are not provided in DT or platform data, we switch to PIO-only mode
also checking if platform provides IRQ numbers and interrupt register offsets
in DT and platform data. All dma-only paths are avoided in this mode.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We initialize the scatter gather walk lists needed for PIO mode and avoid all
DMA paths such as mapping/unmapping buffers by checking for the pio_only flag.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We add an IRQ handler that implements a state-machine for PIO-mode and data
structures for walking the scatter-gather list. The IRQ handler is called in
succession both when data is available to read or next data can be sent for
processing. This process continues till the entire in/out SG lists have been
walked. Once the SG-list has been completely walked, the IRQ handler schedules
the done_task tasklet.
Also add a useful macro that is used through out the IRQ code for a common
pattern of calculating how much an SG list has been walked. This improves code
readability and avoids checkpatch errors.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add IRQ information to pdata and helper macros. These are required
for PIO-mode support.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Intermdiate buffers were allocated, mapped and used for DMA. These are no
longer required as we use the SGs from crypto layer directly in previous
commits in the series. Also along with it, remove the logic for copying SGs
etc as they are no longer used, and all the associated variables in omap_aes_device.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Earlier functions that did a similar sync are replaced by the dma_sync_sg_*
which can operate on entire SG list.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In early version of this driver, assumptions were made such as DMA layer
requires contiguous buffers etc. Due to this, new buffers were allocated,
mapped and used for DMA. These assumptions are no longer true and DMAEngine
scatter-gather DMA doesn't have such requirements. We simply the DMA operations
by directly using the scatter-gather buffers provided by the crypto layer
instead of creating our own.
Lot of logic that handled DMA'ing only X number of bytes of the total, or as
much as fitted into a 3rd party buffer is removed and is no longer required.
Also, good performance improvement of atleast ~20% seen with encrypting a
buffer size of 8K (1800 ops/sec vs 1400 ops/sec). Improvement will be higher
for much larger blocks though such benchmarking is left as an exercise for the
reader. Also DMA usage is much more simplified and coherent with rest of the
code.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Crypto layer only passes nbytes but number of SG elements is needed for mapping
or unmapping SGs at one time using dma_map* API and also needed to pass in for
dmaengine prep function.
We call function added to scatterwalk for this purpose in omap_aes_handle_queue
to populate the values which are used later.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When DEBUG is enabled, these macros can be used to print variables in integer
and hex format, and clearly display which registers, offsets and values are
being read/written , including printing the names of the offsets and their values.
Using statement expression macros in read path as,
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes a bug in the nx-aes-gcm implementation.
Corrected the code so that the authtag is always verified after
decrypting and not just when there is associated data included.
Also, corrected the code to retrieve the input authtag from src
instead of dst.
Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds an option to the Kconfig file for
SEC which enables the user to see the debug messages
that are printed inside the SEC driver.
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
CAAM driver contains one macro (xstr) used for printing
the line location in a file where a memdump is done. This patch
replaces the xstr macro with the already existing __stringify
macro that performs the same function.
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The NX driver uses the transformation context to store several fields
containing data related to the state of the operations in progress.
Since a single tfm can be used by different kernel threads at the same
time, we need to protect the data stored into the context.
This patch makes use of spin locks to protect the data where a race
condition can happen.
Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
These local symbols are used only in this file.
Fix the following sparse warnings:
drivers/crypto/amcc/crypto4xx_alg.c:35:6: warning: symbol 'set_dynamic_sa_command_0' was not declared. Should it be static?
drivers/crypto/amcc/crypto4xx_alg.c:55:6: warning: symbol 'set_dynamic_sa_command_1' was not declared. Should it be static?
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This local symbol is used only in this file.
Fix the following sparse warnings:
drivers/crypto/sahara.c:420:6: warning: symbol 'sahara_watchdog' was not declared. Should it be static?
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes a bug that is triggered when cts(cbc(aes)) is used with
nx-crypto driver on input larger than 32 bytes.
The chaining value from co-processor was not being saved. This value is
needed because it is used as the IV by cts(cbc(aes)).
Signed-off-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The co-processor has several limits regarding the length of
scatter/gather lists and the total number of bytes in it. These limits
are available in the device tree, as following:
- "ibm,max-sg-len": maximum number of bytes of each scatter/gather
list.
- "ibm,max-sync-cop": used for synchronous operations, it is an array
of structures that contains information regarding the limits that
must be considered for each mode and operation. The most important
limits in it are:
- The total number of bytes that a scatter/gather list can hold.
- The maximum number of elements that a scatter/gather list can
have.
This patch updates the NX driver to perform several hyper calls if
needed in order to always respect the length limits for scatter/gather
lists.
Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The co-processor receives data to be hashed through scatter/gather lists
pointing to physical addresses. When a vmalloc'ed data is given, the
driver must calculate the physical address to each page of the data.
However the current version of it just calculates the physical address
once and keeps incrementing it even when a page boundary is crossed.
This patch fixes this behaviour.
Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use devm_kzalloc() to make cleanup paths simpler.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using devm_request_irq() rather than request_irq().
So removing free_irq() calls from the probe error
path and the remove handler.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for the OMAP5 version of the SHAM module
that is present on OMAP5 and AM43xx SoCs.
This module is very simialar to OMAP4 version of SHAM module,
and adds SHA384 SHA512 hardware-accelerated hash functions to it.
To handle the higher digest size of SHA512, few SHA512_DIGEST_i
(i=1-16, and first 8 registers are duplicated from SHA_DIGEST_i
registers) registers are added at the end of register set.
So adding the above register offsets and module info in pdata.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Adding support for SHA348 and SHA512 in addition to MD5, SHA1, SHA224
SHA256 that the omap sha module supports.
In order to add the support
- Removed hard coded register offsets and passing offsets from pdata
- Updating Flag offsets so that they can be used for SHA256 and SHA512
- Adding the algo info.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Logging messages without newlines are possibly interleaved
with other messages. Add terminating newlines to avoid
this.
Other miscellaneous changes:
Make arrays const to reduce data size
Add pr_fmt to prefix pr_<level>, remove now unused DEV_DBG_NAME
Coalesce formats, align arguments
Remove unnecessary OOM messages as dump_stack is already done
Remove unnecessary cast of void *
Change kzalloc(sizeof(struct)...) to kzalloc(sizeof(*var), ...)
Reduce indents in struct definitions
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the dependency of RNG instantiation on Job Ring. Now
RNG instantiation for devices with RNG version > 4 is done
by directly programming DECO 0.
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
DESC_JOB_IO_LEN is a generic macro which indicates the space required in
the descriptor for placing SEQIN/OUT commands, job descriptor header,
shared descriptor pointer. Moving it to descriptor construction file
which can be supposedly included by different algo offload files.
Change-Id: Ic8900990d465e9079827b0c7fcacc61766d7efb6
Signed-off-by: Vakul Garg <vakul@freescale.com>
Reviewed-by: Geanta Neag Horia Ioan-B05471 <horia.geanta@freescale.com>
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull crypto update from Herbert Xu:
- Do not idle omap device between crypto operations in one session.
- Added sha224/sha384 shims for SSSE3.
- More optimisations for camellia-aesni-avx2.
- Removed defunct blowfish/twofish AVX2 implementations.
- Added unaligned buffer self-tests.
- Added PCLMULQDQ optimisation for CRCT10DIF.
- Added support for Freescale's DCP co-processor
- Misc fixes.
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (44 commits)
crypto: testmgr - test hash implementations with unaligned buffers
crypto: testmgr - test AEADs with unaligned buffers
crypto: testmgr - test skciphers with unaligned buffers
crypto: testmgr - check that entries in alg_test_descs are in correct order
Revert "crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher"
Revert "crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher"
crypto: camellia-aesni-avx2 - tune assembly code for more performance
hwrng: bcm2835 - fix MODULE_LICENSE tag
hwrng: nomadik - use clk_prepare_enable()
crypto: picoxcell - replace strict_strtoul() with kstrtoul()
crypto: dcp - Staticize local symbols
crypto: dcp - Use NULL instead of 0
crypto: dcp - Use devm_* APIs
crypto: dcp - Remove redundant platform_set_drvdata()
hwrng: use platform_{get,set}_drvdata()
crypto: omap-aes - Don't idle/start AES device between Encrypt operations
crypto: crct10dif - Use PTR_RET
crypto: ux500 - Cocci spatch "resource_size.spatch"
crypto: sha256_ssse3 - add sha224 support
crypto: sha512_ssse3 - add sha384 support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver specific changes from Arnd Bergmann:
"These changes are all driver specific and cross over between arm-soc
contents and some other subsystem, in these cases cpufreq, crypto,
dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have
these changes merged through arm-soc.
As we proceed to untangle the dependencies between platform code and
driver code, the amount of changes in this category is fortunately
shrinking, for 3.11 we have 16 branches here and 101 non-merge
changesets, the majority of which are for the stedma40 dma engine
driver used in the ux500 platform. Cleaning up that code touches
multiple subsystems, but gets rid of the dependency in the end.
The mailbox code moved out from mach-omap2 to drivers/mailbox is an
intermediate step and is still omap specific at the moment. Patches
exist to generalize the subsystem and add other drivers with the same
API, but those did not make it for 3.11."
* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
crypto: ux500: use dmaengine_submit API
crypto: ux500: use dmaengine_prep_slave_sg API
crypto: ux500: use dmaengine_device_control API
crypto: ux500/crypt: add missing __iomem qualifiers
crypto: ux500/hash: add missing static qualifiers
crypto: ux500/hash: use readl on iomem addresses
dmaengine: ste_dma40: Declare memcpy config as static
ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()
ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO
ARM: ux500: Provide a AB8500 GPIO Device Tree node
gpio: rcar: fix gpio_rcar_of_table
gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
gpio-rcar: Reference core gpio documentation in the DT bindings
clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
ARM: dts: Update Samsung I2S documentation
ARM: dts: add clock provider information for i2s controllers in Exynos5250
ARM: dts: add Exynos audio subsystem clock controller node
clk: samsung: register audio subsystem clocks using common clock framework
ARM: dts: use #include for all device trees for Samsung
pinctrl: s3c24xx: use correct header for chained_irq functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/drivers
From Linus Walleij:
DMA40 fixes for earlier submitted driver patches:
- Fix various error path and sparse bugs in the DMA40 driver
- Fix various compile errors in the ux500 crypto driver
(dependent on the DMA40 changes).
* tag 'ux500-dma40-for-arm-soc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
crypto: ux500: use dmaengine_submit API
crypto: ux500: use dmaengine_prep_slave_sg API
crypto: ux500: use dmaengine_device_control API
crypto: ux500/crypt: add missing __iomem qualifiers
crypto: ux500/hash: add missing static qualifiers
crypto: ux500/hash: use readl on iomem addresses
dmaengine: ste_dma40: Declare memcpy config as static
dmaengine: ste_dma40: fix error return code in d40_probe()
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Use dmaengine_submit instead of calling desc->tx_submit manually.
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use dmaengine_prep_slave_sg inline function instead of going through the
structures manually.
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use dmaengine_device_control inline function instead of going through the
structures manually.
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add missing __iomem to struct cryp_register pointers, this solve some
"incorrect type in initializer (different address spaces)" sparse
warnings.
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add missing static qualifiers to hash_process_data and hash_hw_final.
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Always use readl when reading memory mapped registers.
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Merge crypto to resolve conflict in crypto/Kconfig.
|
|
into next/dt
From Shawn Guo:
mxs device tree changes for 3.11:
* A couple of new board support, cfa10055 and cfa10057
* A few updates on cfa10036 device tree source
* Some auart pinctrl data addition
* Adopt soc bus infrastructure for mach-mxs
* tag 'mxs-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: mxs: dt: Add Crystalfontz CFA-10057 device tree
ARM: mxs: dt: Add the Crystalfontz CFA-10055 device tree
ARM: cfa10049: Switch the chip select pin of the LCD controller
ARM: cfa10036: Add USB0 OTG port
ARM: dts: apf28dev: Add touchscreen support for APF28dev
ARM: mxs: Fix UARTs on M28EVK
ARM: cfa10036: dt: Change i2c0 clock frequency
ARM: dts: cfa10036: Change the OLED display to SSD1306
ARM: mx28: add auart4 2 pins pinmux to imx28.dtsi
ARM: mx28: add auart3 2 pins pinmux to imx28.dtsi
ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi
ARM: mxs: Use soc bus infrastructure
ARM: dts: mx28: Adjust the digctl compatible string
ARM: mxs: Remove init_irq declaration in machine description
Includes an update to 3.10-rc6
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt
From Linus Walleij:
Device tree patches for ux500, basically trees and auxdata:
- Fix for the thermal node to be contained in the PRCMU node
- Add the DTS and auxdata needed to boot the U8540 platform
- Various regulators added and renamed
- Rename base SoC node
- A bunch of DMA patches adding channels for DT boots
- A bunch of crypto+hash patches adding config for DT boots
- A bunch of patches fixing the ALSA SoC support to work
- Register the LP5521 LEDs
- Fix a number of typos and naming errors
* tag 'ux500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (39 commits)
ARM: ux500: drop any 0x prefix from I2C DT devices
ARM: ux500: Allocate correct amount of memory for the u8540 in DT
ARM: ux500: Provide auxdata to ux500 ASoC driver
ARM: ux500: Add DT regulators for ab8500-codec
ARM: ux500: Correct anamic2 typo in DT files
ARM: ux500: Fix trivial typo in v-anamic1 comment
ARM: ux500: Reduce PRCMU reg-names to shorter form for u8540 DT
ARM: ux500: Add an auxdata entry for MUSB for clock-name look-up
ARM: ux500: cut chip-select GPIOs from SSP device
ARM: ux500: use symbolic names for interrupt flags
ARM: ux500: use #include syntax to include *.dtsi.
ARM: ux500: bump MMC/SD max frequency for DT boots
ARM: ux500: Apply other compatible name to the u8540 DTS file
pinctrl/nomadik: Standardise Pinctrl compat string for DBx5x based platforms
ARM: ux500: Standardise Pinctrl compatible string for DBx5x based platforms
ARM: ux500: Standardise DBx5x0 based Pinctrl compat string in the DTS
crypto: ux500/hash - Enable DT probing of the driver
crypto: ux500/cryp - Enable DT probing of the driver
ARM: ux500: enable the crypto and hash on all dbx500
ARM: ux500: Provide an AUXDATA entry for ux500-hash
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers
From Kukjin Kim, driver updats for s3c24xx:
- move cpufreq driver into drivers/
- add pinctrl-s3c24xx driver
- cleanup OF in gpio driver
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pull crypto fixes from Herbert Xu:
"This fixes a build problem in sahara and temporarily disables two new
optimisations because of performance regressions until a permanent fix
is ready"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sahara - fix building as module
crypto: blowfish - disable AVX2 implementation
crypto: twofish - disable AVX2 implementation
|
|
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
These symbols are referenced only in this file and hence
should be static.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Tested-by: Tobias Rauter <tobiasrauter@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use NULL instead of 0 for pointer variables.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Tested-by: Tobias Rauter <tobiasrauter@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
devm_* APIs are device managed and make cleanup and exit
code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Tested-by: Tobias Rauter <tobiasrauter@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no
driver is bound) removes the need to set driver data field to
NULL.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Tested-by: Tobias Rauter <tobiasrauter@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Calling runtime PM API for every block causes serious perf hit to
crypto operations that are done on a long buffer.
As crypto is performed on a page boundary, encrypting large buffers can
cause a series of crypto operations divided by page. The runtime PM API
is also called those many times.
We call runtime_pm_get_sync only at beginning on the session (cra_init)
and runtime_pm_put at the end. This result in upto a 50% speedup as below.
This doesn't make the driver to keep the system awake as runtime get/put
is only called during a crypto session which completes usually quickly.
Before:
root@beagleboard:~# time -v openssl speed -evp aes-128-cbc
Doing aes-128-cbc for 3s on 16 size blocks: 13310 aes-128-cbc's in 0.01s
Doing aes-128-cbc for 3s on 64 size blocks: 13040 aes-128-cbc's in 0.04s
Doing aes-128-cbc for 3s on 256 size blocks: 9134 aes-128-cbc's in 0.03s
Doing aes-128-cbc for 3s on 1024 size blocks: 8939 aes-128-cbc's in 0.01s
Doing aes-128-cbc for 3s on 8192 size blocks: 4299 aes-128-cbc's in 0.00s
After:
root@beagleboard:~# time -v openssl speed -evp aes-128-cbc
Doing aes-128-cbc for 3s on 16 size blocks: 18911 aes-128-cbc's in 0.02s
Doing aes-128-cbc for 3s on 64 size blocks: 18878 aes-128-cbc's in 0.02s
Doing aes-128-cbc for 3s on 256 size blocks: 11878 aes-128-cbc's in 0.10s
Doing aes-128-cbc for 3s on 1024 size blocks: 11538 aes-128-cbc's in 0.05s
Doing aes-128-cbc for 3s on 8192 size blocks: 4857 aes-128-cbc's in 0.03s
While at it, also drop enter and exit pr_debugs, in related code. tracers
can be used for that.
Tested on a Beaglebone (AM335x SoC) board.
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The sahara crypto driver has an incorrect MODULE_DEVICE_TABLE, which
prevents us from actually building this driver as a loadable module.
sahara_dt_ids is a of_device_id array, so we have to use
MODULE_DEVICE_TABLE(of, ...).
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull crypto fixes from Herbert Xu:
"This push fixes a crash in the new sha256_ssse3 driver as well as a
DMA setup/teardown bug in caam"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sha256_ssse3 - fix stack corruption with SSSE3 and AVX implementations
crypto: caam - fix inconsistent assoc dma mapping direction
|
|
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|