summaryrefslogtreecommitdiff
path: root/drivers/dma/omap-dma.c
AgeCommit message (Collapse)Author
2013-04-15dmaengine: OMAP: Register SDMA controller with Device Tree DMA driverJon Hunter
If the device-tree blob is present during boot, then register the SDMA controller with the device-tree DMA driver so that we can use device-tree to look-up DMA client information. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-10dmaengine: omap-dma: Start DMA without delay for cyclic channelsPeter Ujfalusi
cyclic DMA is only used by audio which needs DMA to be started without a delay. If the DMA for audio is started using the tasklet we experience random channel switch (to be more precise: channel shift). Reported-by: Peter Meerwald <pmeerw@pmeerw.net> CC: stable@vger.kernel.org # v3.7+ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-11ARM: OMAP: Fix dmaengine init for multiplatformTony Lindgren
Otherwise omap dmaengine will initialized when booted on other SoCs. Fix this by initializing the platform device in arch/arm/*omap*/dma.c instead. Cc: Russell King <linux@arm.linux.org.uk> Cc: Dan Williams <djbw@fb.com> Cc: Vinod Koul <vinod.koul@intel.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-30ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.hTony Lindgren
Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-31ARM: OMAP: Remove cpu_is_omap usage from plat-omap/dma.cTony Lindgren
This code will be eventually in drivers, and for the code in the drivers we don't want to have any cpu_is_omap usage. Those macros should be private to arch/arm/mach-omap1 and arch/arm/mach-omap2. To fix this, let's move the define for dma_omap2plus() to dma-omap.h, and use the existing dma_attr passed in the platform_data as the revision registers are what they are. Note that we can now also remove the relative includes introduced by the recent clean-up patches. Cc: Russell King <linux@arm.linux.org.uk> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-17Merge branch 'omap-for-v3.8/cleanup-headers-dma' into ↵Tony Lindgren
omap-for-v3.8/cleanup-headers Conflicts: drivers/crypto/omap-aes.c drivers/crypto/omap-sham.c drivers/dma/omap-dma.c
2012-10-15ARM: OMAP: Trivial driver changes to remove include plat/cpu.hTony Lindgren
Drivers should not use cpu_is_omap or cpu_class_is_omap macros, they should be private to the platform init code. And we'll be removing plat/cpu.h and only have a private soc.h for the arch/arm/*omap* code. This patch is intended as preparation for the core omap changes and removes the need to include plat/cpu.h from several drivers. This is needed for the ARM common zImage support. These changes are OK to do because: - omap-rng.c does not need plat/cpu.h - omap-aes.c and omap-sham.c get the proper platform_data passed to them so they don't need extra checks in the driver - omap-dma.c and omap-pcm.c can test the arch locally as omap1 and omap2 cannot be compiled together because of conflicting compiler flags Cc: Deepak Saxena <dsaxena@plexity.net> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Venkatraman S <svenkatr@ti.com> Cc: Chris Ball <cjb@laptop.org> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: linux-crypto@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org [tony@atomide.com: mmc changes folded in to an earlier patch] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-15ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.hLokesh Vutla
Move plat/dma.h to plat-omap/dma-omap.h as part of single zImage work Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-08Merge tag 'sound-3.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
2012-09-22dmaengine: omap-dma: Add support to suppress interrupts in cyclic modePeter Ujfalusi
When requested (DMA_PREP_INTERRUPT is cleared in flags) disable all DMA interrupts for the channel. In this mode user space does not expect periodic reports from kernel about the progress of the audio stream. PulseAudio for example support this type of mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22dmaengine: Pass flags via device_prep_dma_cyclic() callbackPeter Ujfalusi
Change the parameter list of device_prep_dma_cyclic() so the DMA drivers can receive the flags coming from clients. This feature can be used during audio operation to disable all audio related interrupts when the DMA_PREP_INTERRUPT is cleared from the flags. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22dmaengine: omap: Add support for pause/resume in cyclic dma modePeter Ujfalusi
The audio stack used omap_stop_dma/omap_start_dma to pause/resume the DMA. This method has been used for years on OMAP based products. We only allow pause/resume when the DMA has been configured in cyclic mode which is used by the audio stack. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22dmaengine: omap: Support for element mode in cyclic DMAPeter Ujfalusi
When src_maxburst/dst_maxburst is set to 0 by the users of cyclic DMA (mostly audio) indicates that we should configure the omap DMA to element sync mode instead of packet mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-13ARM: OMAP2+: Prepare for irqs.h removalTony Lindgren
As the interrupts should only be defined in the platform_data, and eventually coming from device tree, there's no need to define them in header files. Let's remove the hardcoded references to irqs.h and fix up the includes so we don't rely on headers included in irqs.h. Note that we're defining OMAP_INTC_START as 0 to the interrupts. This will be needed when we enable SPARSE_IRQ. For some drivers we need to add #include <plat/cpu.h> for now until these drivers are fixed to remove cpu_is_omapxxxx() usage. While at it, sort som of the includes the standard way, and add the trailing commas where they are missing in the related data structures. Note that for drivers/staging/tidspbridge we just define things locally. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-31dmaengine: omap: add support for cyclic DMARussell King
Add support for cyclic DMA to the OMAP DMA engine driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31dmaengine: omap: add support for setting fiRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31dmaengine: omap: add support for returning residue in tx_state methodRussell King
Add support for returning the residue for a particular descriptor by reading the current DMA address for the source or destination side of the transfer as appropriate, and walking the scatterlist until we find an entry containing the current DMA address. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31dmaengine: add OMAP DMA engine driverRussell King
Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>