summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2009-07-30Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmaengine: at_hdmac: add DMA slave transfers dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller dmaengine: dmatest: correct thread_count while using multiple thread per channel dmaengine: dmatest: add a maximum number of test iterations drivers/dma: Remove unnecessary semicolons drivers/dma/fsldma.c: Remove unnecessary semicolons dmaengine: move HIGHMEM64G restriction to ASYNC_TX_DMA fsldma: do not clear bandwidth control bits on the 83xx controller fsldma: enable external start for the 83xx controller fsldma: use PCI Read Multiple command
2009-07-23dmaengine: at_hdmac: add DMA slave transfersNicolas Ferre
This patch for at_hdmac adds the slave transfers capability to the Atmel DMA controller available on some AT91 SOCs. This allow peripheral to memory and memory to peripheral transfers with hardware handshaking. Slave structure for controller specific information is passed through channel private data. This at_dma_slave structure is defined in at_hdmac.h header file and relative hardware definition are moved to this file from at_hdmac_regs.h. Doing this we allow the channel configuration from platform definition code. This work is intensively based on dw_dmac and several slave implementations. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-23dmaengine: at_hdmac: new driver for the Atmel AHB DMA ControllerNicolas Ferre
This AHB DMA Controller (aka HDMA or DMAC on AT91 systems) is availlable on at91sam9rl chip. It will be used on other products in the future. This first release covers only the memory-to-memory tranfer type. This is the only tranfer type supported by this chip. On other products, it will be used also for peripheral DMA transfer (slave API support to come). I used dmatest client without problem in different configurations to test it. Full documentation for this controller can be found in the SAM9RL datasheet: http://www.atmel.com/dyn/products/product_card.asp?part_id=4243 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-23dmaengine: dmatest: correct thread_count while using multiple thread per channelNicolas Ferre
It seems that thread_count is not properly calculated in dmatest. In fact the thread count number that is returned from dmatest_add_threads() is not correctly added to the thread_count and thus not properly printed. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-23dmaengine: dmatest: add a maximum number of test iterationsNicolas Ferre
The dmatest usually waits for the killing of its kthreads to stop running tests. This patch adds a parameter that sets a maximum number of test iterations. This feature is quite interesting for debugging when you set a lot of traces in your dmaengine controller driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-23drivers/dma: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-23drivers/dma/fsldma.c: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-01dmaengine: move HIGHMEM64G restriction to ASYNC_TX_DMADan Williams
On HIGHMEM64G systems dma_addr_t is known to be larger than (void *) which precludes async_xor from performing dma address conversions by reusing the input parameter address list. However, other parts of the dmaengine infrastructure do not suffer this constraint, so the HIGHMEM64G restriction can be down-levelled. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-06-24DMA: txx9dmac: use dma_unmap_single if DMA_COMPL_{SRC,DEST}_UNMAP_SINGLE setAtsushi Nemoto
This patch does not change actual behaviour since dma_unmap_page is just an alias of dma_unmap_single on MIPS. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-17DMA: TXx9 Soc DMA Controller driverAtsushi Nemoto
This patch adds support for the integrated DMAC of the TXx9 family. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-16fsldma: do not clear bandwidth control bits on the 83xx controllerIra Snyder
The 83xx controller does not support the external pause feature. The bit in the mode register that controls external pause on the 85xx controller happens to be part of the bandwidth control settings for the 83xx controller. This patch fixes the driver so that it only clears the external pause bit if the hardware is the 85xx controller. When driving the 83xx controller, the bit is left untouched. This follows the existing convention that mode registers settings are not touched unless necessary. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-06-16fsldma: enable external start for the 83xx controllerIra Snyder
The 83xx controller has external start capability, but lacks external pause capability. Hook up the external start function pointer for the 83xx controller. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-06-16fsldma: use PCI Read Multiple commandIra W. Snyder
By default, the Freescale 83xx DMA controller uses the PCI Read Line command when reading data over the PCI bus. Setting the controller to use the PCI Read Multiple command instead allows the controller to read much larger bursts of data, which provides a drastic speed increase. The slowdown due to using PCI Read Line was only observed when a PCI-to-PCI bridge was between the devices trying to communicate. A simple test driver showed an increase from 4MB/sec to 116MB/sec when performing DMA over the PCI bus. Using DMA to transfer between blocks of local SDRAM showed no change in performance with this patch. The dmatest driver was also used to verify the correctness of the transfers, and showed no errors. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-05-30Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI, i915: build fix (v2) acpi-cpufreq: fix printk typo and indentation ACPI processor: remove spurious newline from warning message drm/i915: acpi/video.c fix section mismatch warning ACPI: video: DMI workaround broken Acer 5315 BIOS enabling display brightness ACPI: video: DMI workaround broken eMachines E510 BIOS enabling display brightness ACPI: sanity check _PSS frequency to prevent cpufreq crash i7300_idle: allow testing on i5000-series hardware w/o re-compile PCI/ACPI: fix wrong ref count handling in acpi_pci_bind() cpuidle: fix AMD C1E suspend hang cpuidle: makes AMD C1E work in acpi_idle
2009-05-29i7300_idle: allow testing on i5000-series hardware w/o re-compileLen Brown
Testing the i7300_idle driver on i5000-series hardware required an edit to i7300_idle.h to "#define SUPPORT_I5000 1" and a re-build of both i7300_idle and ioat_dma. Replace that build-time scheme with a load-time module parameter: "7300_idle.forceload=1" to make it easier to test the driver on hardware that while not officially validated, works fine and is much more commonly available. By default (no modparam) the driver will continue to load only on the i7300. Note that ioat_dma runs a copy of i7300_idle's probe routine to know to reserve an IOAT channel for i7300_idle. This change makes ioat_dma do that always on the i5000, just like it does on the i7300. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Andrew Henroid <andrew.d.henroid@intel.com>
2009-05-27fsldma: Fix compile warningsKumar Gala
We we build with dma_addr_t as a 64-bit quantity we get: drivers/dma/fsldma.c: In function 'fsl_chan_xfer_ld_queue': drivers/dma/fsldma.c:625: warning: cast to pointer from integer of different size drivers/dma/fsldma.c: In function 'fsl_dma_chan_do_interrupt': drivers/dma/fsldma.c:737: warning: cast to pointer from integer of different size drivers/dma/fsldma.c:737: warning: cast to pointer from integer of different size drivers/dma/fsldma.c: In function 'of_fsl_dma_probe': drivers/dma/fsldma.c:927: warning: cast to pointer from integer of different Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-05-22fsldma: fix memory leak on error path in fsl_dma_prep_memcpy()Ira Snyder
When preparing a memcpy operation, if the kernel fails to allocate memory for a link descriptor after the first link descriptor has already been allocated, then some memory will never be released. Fix the problem by walking the list of allocated descriptors backwards, and freeing the allocated descriptors back into the DMA pool. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Li Yang <leoli@freescale.com>
2009-05-22fsldma: snooping is not enabled for last entry in descriptor chainIra Snyder
On the 83xx controller, snooping is necessary for the DMA controller to ensure cache coherence with the CPU when transferring to/from RAM. The last descriptor in a chain will always have the End-of-Chain interrupt bit set, so we can set the snoop bit while adding the End-of-Chain interrupt bit. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Li Yang <leoli@freescale.com>
2009-05-22fsldma: fix infinite loop on multi-descriptor DMA chain completionIra Snyder
When creating a DMA transaction with multiple descriptors, the async_tx cookie is set to 0 for each descriptor in the chain, excluding the last descriptor, whose cookie is set to -EBUSY. When fsl_dma_tx_submit() is run, it only assigns a cookie to the first descriptor. All of the remaining descriptors keep their original value, including the last descriptor, which is set to -EBUSY. After the DMA completes, the driver will update the last completed cookie to be -EBUSY, which is an error code instead of a valid cookie. This causes dma_async_is_complete() to always return DMA_IN_PROGRESS. This causes the fsldma driver to never cleanup the queue of link descriptors, and the driver will re-run the DMA transaction on the hardware each time it receives the End-of-Chain interrupt. This causes an infinite loop. With this patch, fsl_dma_tx_submit() is changed to assign a cookie to every descriptor in the chain. The rest of the code then works without problems. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Li Yang <leoli@freescale.com>
2009-05-22fsldma: fix "DMA halt timeout!" errorsIra Snyder
When using the DMA controller from multiple threads at the same time, it is possible to get lots of "DMA halt timeout!" errors printed to the kernel log. This occurs due to a race between fsl_dma_memcpy_issue_pending() and the interrupt handler, fsl_dma_chan_do_interrupt(). Both call the fsl_chan_xfer_ld_queue() function, which does not protect against concurrent accesses to dma_halt() and dma_start(). The existing spinlock is moved to cover the dma_halt() and dma_start() functions. Testing shows that the "DMA halt timeout!" errors disappear. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Li Yang <leoli@freescale.com>
2009-05-22fsldma: fix check on potential fdev->chan[] overflowRoel Kluin
Fix the check of potential array overflow when using corrupted channel device tree nodes. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Li Yang <leoli@freescale.com>
2009-05-12dma: fix ipu_idmac.c to not discard the last queued bufferGuennadi Liakhovetski
This also fixes the case of a single queued buffer, for example, when taking a single frame snapshot with the mx3_camera driver. Reported-by: Agustin Ferrin Pozuelo <gatoguan-os@yahoo.com> Tested-by: Agustin Ferrin Pozuelo <gatoguan-os@yahoo.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-05-12ioatdma: fix "ioatdma frees DMA memory with wrong function"Maciej Sosnowski
as reported by Alexander Beregalov <a.beregalov@gmail.com> ioatdma 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000007f76f800] [size=2000 bytes] [map ped as single] [unmapped as page] The ioatdma driver was unmapping all regions (either allocated as page or single) using unmap_page. This patch lets dma driver recognize if unmap_single or unmap_page should be used. It introduces two new dma control flags: DMA_COMPL_SRC_UNMAP_SINGLE and DMA_COMPL_DEST_UNMAP_SINGLE. They should be set to indicate dma driver to do dma-unmapping as single (first one for the source, tha latter for the destination). If respective flag is not set, the driver assumes dma-unmapping as page. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-05-05ipu_idmac: Use disable_irq_nosync() from within irq handlers.Ben Nizette
disable_irq() should wait for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Note the 2 handlers in question are only used #ifdef DEBUG so I imagine these code paths don't get hit often. Signed-off-by: Ben Nizette <bn@niasdigital.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-04-08dmatest: fix max channels handlingDan Williams
The check for reaching max_channels is short circuited by 'continuing' after successfully adding a channel. [ Impact: make the 'max_channels' module parameter actually have an effect ] Cc: <stable@kernel.org> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dma: Add SoF and EoF debugging to ipu_idmac.c, minor cleanup dw_dmac: add cyclic API to DW DMA driver dmaengine: Add privatecnt to revert DMA_PRIVATE property dmatest: add dma interrupts and callbacks dmatest: add xor test dmaengine: allow dma support for async_tx to be toggled async_tx: provide __async_inline for HAS_DMA=n archs dmaengine: kill some unused headers dmaengine: initialize tx_list in dma_async_tx_descriptor_init dma: i.MX31 IPU DMA robustness improvements dma: improve section assignment in i.MX31 IPU DMA driver dma: ipu_idmac driver cosmetic clean-up dmaengine: fail device registration if channel registration fails
2009-04-02dma: Add SoF and EoF debugging to ipu_idmac.c, minor cleanupGuennadi Liakhovetski
Add Start-of-Frame and End-of-Frame debugging to ipu_idmac.c, in the future it might also be needed for the actual video processing in mx3-camera, at which point, the ISRs will have to be transferred to mx3_camera.c, for which ipu_irq_map() and ipu_irq_unmap() functions will have to be exported. Also simplify a couple of pointer-dereferences. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-04-01dw_dmac: add cyclic API to DW DMA driverHans-Christian Egtvedt
This patch adds a cyclic DMA interface to the DW DMA driver. This is very useful if you want to use the DMA controller in combination with a sound device which uses cyclic buffers. Using a DMA channel for cyclic DMA will disable the possibility to use it as a normal DMA engine until the user calls the cyclic free function on the DMA channel. Also a cyclic DMA list can not be prepared if the channel is already active. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-28Merge branch 'origin' into develRussell King
Conflicts: sound/soc/pxa/pxa2xx-i2s.c
2009-03-26dmaengine: Add privatecnt to revert DMA_PRIVATE propertyAtsushi Nemoto
Currently dma_request_channel() set DMA_PRIVATE capability but never clear it. So if a public channel was once grabbed by dma_request_channel(), the device stay PRIVATE forever. Add privatecnt member to dma_device to correctly revert it. [lg@denx.de: fix bad usage of 'chan' in dma_async_device_register] Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-25dmatest: add dma interrupts and callbacksDan Williams
Use the callback infrastructure to report driver/hardware hangs or missed interrupts. Since this makes the test threads much more aggressive (from: explicit 1ms sleep to: wait_for_completion) we set the nice value to 10 so as to not swamp legitimate tasks. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-25dmatest: add xor testDan Williams
Extend dmatest to launch a thread per supported operation type and add an xor test. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-25dmaengine: allow dma support for async_tx to be toggledDan Williams
Provide a config option for blocking the allocation of dma channels to the async_tx api. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-25dmaengine: initialize tx_list in dma_async_tx_descriptor_initDan Williams
Centralize this common initialization (and one case where ipu_idmac is duplicating ->chan initialization). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-25dma: i.MX31 IPU DMA robustness improvementsGuennadi Liakhovetski
Add DMA error handling to the ISR, move common code fragments to functions, fix scatter-gather element queuing in the ISR, survive channel freeing and re-allocation in a quick succession. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-25dma: improve section assignment in i.MX31 IPU DMA driverGuennadi Liakhovetski
The i.MX31 IPU DMA driver is a platform driver, but doesn't need hotplug, so we can use __init and __exit function attributes. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-25dma: ipu_idmac driver cosmetic clean-upGuennadi Liakhovetski
Remove superfluous semicolons, update comments. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-25dmaengine: fail device registration if channel registration failsDan Williams
Atsushi points out: "If alloc_percpu or kzalloc failed, chan_id does not match with its position in device->channels list. And above "continue" looks buggy anyway. Keeping incomplete channels in device->channels list looks very dangerous..." Also, fix up leakage of idr_ref in the idr_pre_get() and channel init fail cases. Reported-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-24dma: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Cc: Dan Williams <dan.j.williams@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-13MX31 clkdev supportSascha Hauer
This patch adds clkdev support for i.MX31. This is done in a similar way done previously for i.MX27 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-08Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmatest: fix use after free in dmatest_exit ipu_idmac: fix spinlock type iop-adma, mv_xor: fix mem leak on self-test setup failure fsldma: fix off by one in dma_halt I/OAT: fail self-test if callback test reaches timeout I/OAT: update driver version and copyright dates I/OAT: list usage cleanup I/OAT: set tcp_dma_copybreak to 256k for I/OAT ver.3 I/OAT: cancel watchdog before dma remove I/OAT: fail initialization on zero channels detection I/OAT: do not set DCACTRL_CMPL_WRITE_ENABLE for I/OAT ver.3 I/OAT: add verification for proper APICID_TAG_MAP setting by BIOS dmaengine: update kerneldoc
2009-03-04dmatest: fix use after free in dmatest_exitDan Williams
dmatest_cleanup_chanel will free dtc, so grab ->chan before it goes away and use it to do the release. Reported-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-04ipu_idmac: fix spinlock typeLuotao Fu
fix a probably accidently dropped reference operator while calling spin_unlock_restore to an ipu lock. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Cc: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-04iop-adma, mv_xor: fix mem leak on self-test setup failureRoel Kluin
iop_adma_zero_sum_self_test has the brackets in the wrong place for the setup failure deallocation path. This error was duplicated in mv_xor_xor_self_test. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-04fsldma: fix off by one in dma_haltDan Williams
Prevent dev_err from firing even if we successfully detected 'dma-idle' before the full 1ms timeout has elapsed. Acked-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-04I/OAT: fail self-test if callback test reaches timeoutDan Williams
If we miss interrupts in the self test then fail registration of this channel as it is unsuitable for use as a public channel. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-04I/OAT: update driver version and copyright datesMaciej Sosnowski
Together with new fixes update driver version and extend copyright dates ranges. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-04I/OAT: list usage cleanupEric Sesterhenn
Trivial cleanup, list_del(); list_add_tail() is equivalent to list_move_tail(). Semantic patch for coccinelle can be found at www.cccmz.de/~snakebyte/list_move_tail.spatch Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>