summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2013-08-08Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Kevin Hilman: - MSM: GPIO fixes (includes old code removal) - OMAP: earlyprintk regression, AM33xx cpgmac PM regression - OMAP5: urgent fix for potentially harmful voltage regulator values - Renesas: gpio-keys fix, fix SD card detection, fix shdma calculation error - STi: critical SMP boot fix - tegra: DTS fix for usb-phy - a couple MAINTAINERS updates (Arnd is on paternity leave, Kevin is stepping up to help arm-soc maintenance) * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: add TI Keystone ARM platform MAINTAINERS: delete Srinidhi from ux500 ARM: tegra: enable ULPI phy on Colibri T20 ARM: STi: remove sti_secondary_start from INIT section. ARM: STi: Fix cpu nodes with correct device_type. ARM: shmobile: lager: do not annotate gpio_buttons as __initdata ARM: shmobile: BOCK-W: fix SDHI0 PFC settings shdma: fixup sh_dmae_get_partial() calculation error ARM: OMAP2+: hwmod: AM335x: fix cpgmac address space ARM: OMAP2+: hwmod: rt address space index for DT ARM: OMAP2+: Sync hwmod state with the pm_runtime and omap_device state ARM: OMAP2+: Avoid idling memory controllers with no drivers ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL ARM: dts: omap5-uevm: update optional/unused regulator configurations ARM: dts: omap5-uevm: fix regulator configurations mandatory for SoC ARM: dts: omap5-uevm: document regulator signals used on the actual board ARM: msm: Consolidate gpiomux for older architectures ARM: shmobile: armadillo800eva: Don't request GPIO 166 in board code ARM: msm: dts: Fix the gpio register address for msm8960
2013-07-31shdma: fixup sh_dmae_get_partial() calculation errorKuninori Morimoto
sh_desc->hw.tcr is controlling real data size, and, register TCR is controlling data transfer count which was xmit_shifted value of hw.tcr. Current sh_dmae_get_partial() is calculating in different unit. This patch fixes it. This bug has been present since c014906a870ce70e009def0c9d170ccabeb0be63 ("dmaengine: shdma: extend .device_terminate_all() to record partial transfer"), which was added in 2.6.34-rc1. Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-28dma: pl330: Fix cyclic transfersLars-Peter Clausen
Allocate a descriptor for each period of a cyclic transfer, not just the first. Also since the callback needs to be called for each finished period make sure to initialize the callback and callback_param fields of each descriptor in a cyclic transfer. Cc: stable@vger.kernel.org Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-22pch_dma: fix error return code in pch_dma_probe()Wei Yongjun
Fix to return -ENODEV when no proper base address found error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-09drivers/dma/iop-adma.c: fix new warningsOlof Johansson
The recent "drivers/dma: remove unused support for MEMSET operations" change has fallout from lack of build testing by the author. This fixes: drivers/dma/iop-adma.c:1020:13: warning: unused variable 'dma_addr' [-Wunused-variable] drivers/dma/iop-adma.c:1519:2: warning: format '%s' expects a matching 'char *' argument [-Wformat=] Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-07Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "Once you have some time from extended weekend celebrations please consider pulling the following to get: - Various fixes and PCI driver for dw_dmac by Andy - DT binding for imx-dma by Markus & imx-sdma by Shawn - DT fixes for dmaengine by Lars - jz4740 dmac driver by Lars - and various fixes across the drivers" What "extended weekend celebrations"? I'm in the merge window, who has time for extended celebrations.. * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits) DMA: shdma: add DT support DMA: shdma: shdma_chan_filter() has to be in shdma-base.h DMA: shdma: (cosmetic) don't re-calculate a pointer dmaengine: at_hdmac: prepare clk before calling enable dmaengine/trivial: at_hdmac: add curly brackets to if/else expressions dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors() dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding ARM: at91: dt: add header to define at_hdmac configuration MIPS: jz4740: Correct clock gate bit for DMA controller MIPS: jz4740: Remove custom DMA API MIPS: jz4740: Register jz4740 DMA device dma: Add a jz4740 dmaengine driver MIPS: jz4740: Acquire and enable DMA controller clock dma: mmp_tdma: disable irq when disabling dma channel dmaengine: PL08x: Avoid collisions with get_signal() macro dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagically dma: dw: add PCI part of the driver dma: dw: split driver to library part and platform code dma: move dw_dmac driver to an own directory dw_dmac: don't check resource with devm_ioremap_resource ...
2013-07-05DMA: shdma: add DT supportGuennadi Liakhovetski
This patch adds Device Tree support to the shdma driver. No special DT properties are used, only standard DMA DT bindings are implemented. Since shdma controllers reside on SoCs, their configuration is SoC-specific and shall be passed to the driver from the SoC platform data, using the auxdata procedure. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05DMA: shdma: (cosmetic) don't re-calculate a pointerGuennadi Liakhovetski
Use an existing pointer instead of retrieving it again. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: at_hdmac: prepare clk before calling enableBoris BREZILLON
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to avoid common clk framework warnings. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> [nicolas.ferre@atmel.com: remove return code checking in at_dma_resume_noirq()] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-07-05dmaengine/trivial: at_hdmac: add curly brackets to if/else expressionsNicolas Ferre
Correct coding style following the patch: 7c407d3e54dcc0c79119553c8d5ef176c1d5bc3a (DMA: AT91: Get residual bytes in dma buffer). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-07-05dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors()Nicolas Ferre
Since patch 7c407d3e54dcc0c79119553c8d5ef176c1d5bc3a (DMA: AT91: Get residual bytes in dma buffer), the function atc_cleanup_descriptors() is not used anymore. We remove it to prevent warnings. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-07-05dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT bindingLudovic Desroches
For most devices the FIFO configuration is the same i.e. when half FIFO size is available/filled, a source/destination request is serviced. But USART devices have to do it when there is enough space/data available to perform a single AHB access so the ASAP configuration. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-07-05MIPS: jz4740: Remove custom DMA APILars-Peter Clausen
Now that all users of the custom jz4740 DMA API have been converted to use the dmaengine API instead we can remove the custom API and move all the code talking to the hardware to the dmaengine driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: Add a jz4740 dmaengine driverLars-Peter Clausen
This patch adds dmaengine support for the JZ4740 DMA controller. For now the driver will be a wrapper around the custom JZ4740 DMA API. Once all users of the custom JZ4740 DMA API have been converted to the dmaengine API the custom API will be removed and direct hardware access will be added to the dmaengine driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: mmp_tdma: disable irq when disabling dma channelQiao Zhou
mask dma irq when disabling dma channel, so that interrupt status will not be set and interrupt won't come again. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Zhangfei Gao <zhangfei.gao@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: PL08x: Avoid collisions with get_signal() macroMark Brown
As pointed out by Arnd Bergmann there is a get_signal macro definied in linux/signal.h which can conflict with the platform data callback function of the same name leading to confusing errors from the compiler (especially if signal.h manages to get pulled into the driver itself due to header dependencies). Avoid such errors by renaming get_signal and put_signal in the platform data to get_xfer_signal and put_xfer_signal. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagicallyVinod Koul
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: dw: add PCI part of the driverAndy Shevchenko
This is the PCI part of the DesignWare DMAC driver. The controller is usually used in the Intel hardware such as Intel Medfield. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: dw: split driver to library part and platform codeAndy Shevchenko
To simplify the driver development let's split driver to library and platform code parts. It helps us to add PCI driver in future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [Fixed compile error and few checkpatch issues] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: move dw_dmac driver to an own directoryAndy Shevchenko
The dw_dmac driver is going to be split into multiple files. To make this more convenient move it to an own directory. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dw_dmac: don't check resource with devm_ioremap_resourceAndy Shevchenko
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: pl330: use dma_addr_t for describing bus addressesWill Deacon
The microcode bus address (pl330_dmac.mcode_bus) is currently a u32, which fails to compile when building on a system with 64-bit bus addresses. This patch uses dma_addr_t to represent the address instead. Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: pl330: rip out broken, redundant ID probingWill Deacon
The PL330 driver probes the peripheral and primecell IDs of the device to make sure that it is indeed an AMBA PL330. However, it does this by making byte accesses to a device mapping of the word-aligned ID registers, which is either UNPREDICTABLE or generates an alignment fault (depending on the presence of the virtualisation extensions). Rather than fix this code, we can actually rip most of it out and let the AMBA bus driver correctly do the probing for us. Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: imx-sdma: move to generic device tree bindingsShawn Guo
Update imx-sdma driver to adopt generic DMA device tree bindings. It calls of_dma_controller_register() with imx-sdma specific of_dma_xlate to get the generic DMA device tree helper support. The #dma-cells for imx-sdma must be 3, which includes request ID, peripheral type and priority. The existing way of requesting channel, clients directly call dma_request_channel(), still work there, and will be removed after all imx-sdma clients get converted to generic DMA device tree helper. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-07-05dmaengine: sirf: set dma residue based on the current dma transfer positionRongjun Ying
read SIRFSOC_DMA_CH_ADDR register to get current dma transfer position, then update dma residue so that things like ALSA drivers work as ALSA drivers need the right residue value. Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: tegra: avoid channel lock up after freeDmitry Osipenko
Lock scenario: Channel 1 was allocated and prepared as slave_sg, used and freed. Now preparation of cyclic dma on channel 1 will fail with err "DMA configuration conflict" because tdc->isr_handler still setted to handle_once_dma_done. This happens because tegra_dma_abort_all() won't be called on channel freeing if pending list is empty and channel not busy. We need to clear isr_handler on channel freeing to avoid locking. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: tegra20-apbdma: err message correctionDmitry Osipenko
Fixed err msg params order on irq request fail. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dw_dmac: remove inline marking of EXPORT_SYMBOL functionsDenis Efremov
EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: timb_dma: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: at_hdmac: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: mxs-dma: Staticize mxs_dma_xlateFabio Estevam
Fix the following sparse warning: drivers/dma/mxs-dma.c:696:17: warning: symbol 'mxs_dma_xlate' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: use platform_{get,set}_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Also, unnecessary dev_set_drvdata() is removed, because the driver core clears the driver data to NULL after device_release or on probe failure. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05DMA: AT91: Get residual bytes in dma bufferElen Song
Add support for returning the residue for current transfer cookie by reading the transfered buffer size(BTSIZE) in CTRLA register. For a single buffer cookie, the descriptor length minus BTSIZE can get the residue. For a lli cookie, remain_desc will record remain descriptor length when last descriptor finish, the remain_desc minus BTSIZE can get the current residue. If the cookie has completed successfully, the residue will be zero. If the cookie is in progress, it will be the number of bytes yet to be transferred. If get residue error, the cookie will be turn into error status. Check dma fifo to see if data remain, let issue pending finish remain work if there is. Signed-off-by: Elen Song <elen.song@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05DMA: AT91: Get transfer widthElen Song
In one dma transfer, the data transfer width can be configured and it is limited by source or destination peripheral width, tx_width will save the transfer width, but for memcpy, either source or destination transfer width is taken as tx_width. Signed-off-by: Elen Song <elen.song@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: at_hdmac/trivial: rearrange CFG register bits assignmentNicolas Ferre
No modification in CFG register configuration, just rearrange bits directives to group logically and make it more readable. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: at_hdmac: extend hardware handshaking interface identificationNicolas Ferre
Peripheral handshaking identification numbers can be bigger than 15, so new fields have been created in the CFG register. Add macros to take this modification into account and use them in at_dma_xlate() function. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: at_hdmac/trivial: correct typo in commentNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05DMA: imx-dma: imxdma->dev used uninitializedMarkus Pargmann
imxdma->dev is used for dev_warn before it was set. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: imx-dma: Add oftree supportMarkus Pargmann
Adding devicetree support for imx-dma driver. Use driver name for function 'imx_dma_is_general_purpose' because the devicename for devicetree initialized devices is different. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-04Merge branch 'akpm' (updates from Andrew Morton)Linus Torvalds
Merge first patch-bomb from Andrew Morton: - various misc bits - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been distracted. There has been quite a bit of activity. - About half the MM queue - Some backlight bits - Various lib/ updates - checkpatch updates - zillions more little rtc patches - ptrace - signals - exec - procfs - rapidio - nbd - aoe - pps - memstick - tools/testing/selftests updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits) tools/testing/selftests: don't assume the x bit is set on scripts selftests: add .gitignore for kcmp selftests: fix clean target in kcmp Makefile selftests: add .gitignore for vm selftests: add hugetlbfstest self-test: fix make clean selftests: exit 1 on failure kernel/resource.c: remove the unneeded assignment in function __find_resource aio: fix wrong comment in aio_complete() drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode drivers/memstick/host/r592.c: convert to module_pci_driver drivers/memstick/host/jmb38x_ms: convert to module_pci_driver pps-gpio: add device-tree binding and support drivers/pps/clients/pps-gpio.c: convert to module_platform_driver drivers/pps/clients/pps-gpio.c: convert to devm_* helpers drivers/parport/share.c: use kzalloc Documentation/accounting/getdelays.c: avoid strncpy in accounting tool aoe: update internal version number to v83 aoe: update copyright date aoe: perform I/O completions in parallel ...
2013-07-03drivers/dma: remove unused support for MEMSET operationsBartlomiej Zolnierkiewicz
There have never been any real users of MEMSET operations since they have been introduced in January 2007 by commit 7405f74badf4 ("dmaengine: refactor dmaengine around dma_async_tx_descriptor"). Therefore remove support for them for now, it can be always brought back when needed. [sebastian.hesselbarth@gmail.com: fix drivers/dma/mv_xor] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Vinod Koul <vinod.koul@intel.com> Acked-by: Dan Williams <djbw@fb.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/dma/pl330.c: fix locking in pl330_free_chan_resources()Bartlomiej Zolnierkiewicz
tasklet_kill() may sleep so call it before taking pch->lock. Fixes following lockup: BUG: scheduling while atomic: cat/2383/0x00000002 Modules linked in: unwind_backtrace+0x0/0xfc __schedule_bug+0x4c/0x58 __schedule+0x690/0x6e0 sys_sched_yield+0x70/0x78 tasklet_kill+0x34/0x8c pl330_free_chan_resources+0x24/0x88 dma_chan_put+0x4c/0x50 [...] BUG: spinlock lockup suspected on CPU#0, swapper/0/0 lock: 0xe52aa04c, .magic: dead4ead, .owner: cat/2383, .owner_cpu: 1 unwind_backtrace+0x0/0xfc do_raw_spin_lock+0x194/0x204 _raw_spin_lock_irqsave+0x20/0x28 pl330_tasklet+0x2c/0x5a8 tasklet_action+0xfc/0x114 __do_softirq+0xe4/0x19c irq_exit+0x98/0x9c handle_IPI+0x124/0x16c gic_handle_irq+0x64/0x68 __irq_svc+0x40/0x70 cpuidle_wrap_enter+0x4c/0xa0 cpuidle_enter_state+0x18/0x68 cpuidle_idle_call+0xac/0xe0 cpu_idle+0xac/0xf0 Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Cc: Vinod Koul <vinod.koul@linux.intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03Merge tag 'pm+acpi-3.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "This time the total number of ACPI commits is slightly greater than the number of cpufreq commits, but Viresh Kumar (who works on cpufreq) remains the most active patch submitter. To me, the most significant change is the addition of offline/online device operations to the driver core (with the Greg's blessing) and the related modifications of the ACPI core hotplug code. Next are the freezer updates from Colin Cross that should make the freezing of tasks a bit less heavy weight. We also have a couple of regression fixes, a number of fixes for issues that have not been identified as regressions, two new drivers and a bunch of cleanups all over. Highlights: - Hotplug changes to support graceful hot-removal failures. It sometimes is necessary to fail device hot-removal operations gracefully if they cannot be carried out completely. For example, if memory from a memory module being hot-removed has been allocated for the kernel's own use and cannot be moved elsewhere, it's desirable to fail the hot-removal operation in a graceful way rather than to crash the kernel, but currenty a success or a kernel crash are the only possible outcomes of an attempted memory hot-removal. Needless to say, that is not a very attractive alternative and it had to be addressed. However, in order to make it work for memory, I first had to make it work for CPUs and for this purpose I needed to modify the ACPI processor driver. It's been split into two parts, a resident one handling the low-level initialization/cleanup and a modular one playing the actual driver's role (but it binds to the CPU system device objects rather than to the ACPI device objects representing processors). That's been sort of like a live brain surgery on a patient who's riding a bike. So this is a little scary, but since we found and fixed a couple of regressions it caused to happen during the early linux-next testing (a month ago), nobody has complained. As a bonus we remove some duplicated ACPI hotplug code, because the ACPI-based CPU hotplug is now going to use the common ACPI hotplug code. - Lighter weight freezing of tasks. These changes from Colin Cross and Mandeep Singh Baines are targeted at making the freezing of tasks a bit less heavy weight operation. They reduce the number of tasks woken up every time during the freezing, by using the observation that the freezer simply doesn't need to wake up some of them and wait for them all to call refrigerator(). The time needed for the freezer to decide to report a failure is reduced too. Also reintroduced is the check causing a lockdep warining to trigger when try_to_freeze() is called with locks held (which is generally unsafe and shouldn't happen). - cpufreq updates First off, a commit from Srivatsa S Bhat fixes a resume regression introduced during the 3.10 cycle causing some cpufreq sysfs attributes to return wrong values to user space after resume. The fix is kind of fresh, but also it's pretty obvious once Srivatsa has identified the root cause. Second, we have a new freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to provide information previously available via related_cpus. From Lan Tianyu. Finally, we fix a number of issues, mostly related to the CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean up some code. The majority of changes from Viresh Kumar with bits from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and Tang Yuantian. - ACPICA update A usual bunch of updates from the ACPICA upstream. During the 3.4 cycle we introduced support for ACPI 5 extended sleep registers, but they are only supposed to be used if the HW-reduced mode bit is set in the FADT flags and the code attempted to use them without checking that bit. That caused suspend/resume regressions to happen on some systems. Fix from Lv Zheng causes those registers to be used only if the HW-reduced mode bit is set. Apart from this some other ACPICA bugs are fixed and code cleanups are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and Zhang Rui. - cpuidle updates New driver for Xilinx Zynq processors is added by Michal Simek. Multidriver support simplification, addition of some missing kerneldoc comments and Kconfig-related fixes come from Daniel Lezcano. - ACPI power management updates Changes to make suspend/resume work correctly in Xen guests from Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and cleanups and fixes of the ACPI device power state selection routine. - ACPI documentation updates Some previously missing pieces of ACPI documentation are added by Lv Zheng and Aaron Lu (hopefully, that will help people to uderstand how the ACPI subsystem works) and one outdated doc is updated by Hanjun Guo. - Assorted ACPI updates We finally nailed down the IA-64 issue that was the reason for reverting commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers"), so we can fix it and move the ACPI scan handler check added to the ACPI video driver back to the core. A mechanism for adding CMOS RTC address space handlers is introduced by Lan Tianyu to allow some EC-related breakage to be fixed on some systems. A spec-compliant implementation of acpi_os_get_timer() is added by Mika Westerberg. The evaluation of _STA is added to do_acpi_find_child() to avoid situations in which a pointer to a disabled device object is returned instead of an enabled one with the same _ADR value. From Jeff Wu. Intel BayTrail PCH (Platform Controller Hub) support is added to the ACPI driver for Intel Low-Power Subsystems (LPSS) and that driver is modified to work around a couple of known BIOS issues. Changes from Mika Westerberg and Heikki Krogerus. The EC driver is fixed by Vasiliy Kulikov to use get_user() and put_user() instead of dereferencing user space pointers blindly. Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi Kani. - Assorted power management updates The "runtime idle" helper routine is changed to take the return values of the callbacks executed by it into account and to call rpm_suspend() if they return 0, which allows us to reduce the overall code bloat a bit (by dropping some code that's not necessary any more after that modification). The runtime PM documentation is updated by Alan Stern (to reflect the "runtime idle" behavior change). New trace points for PM QoS are added by Sahara (<keun-o.park@windriver.com>). PM QoS documentation is updated by Lan Tianyu. Code cleanups are made and minor issues are addressed by Bernie Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan. - devfreq updates New driver for the Exynos5-bus device from Abhilash Kesavan. Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun. - OMAP power management updates Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver updates from Andrii Tseglytskyi and Nishanth Menon." * tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) cpufreq: Fix cpufreq regression after suspend/resume ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state() PM / Sleep: Warn about system time after resume with pm_trace cpufreq: don't leave stale policy pointer in cdbs->cur_policy acpi-cpufreq: Add new sysfs attribute freqdomain_cpus cpufreq: make sure frequency transitions are serialized ACPI: implement acpi_os_get_timer() according the spec ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan ACPI: Add CMOS RTC Operation Region handler support ACPI / processor: Drop unused variable from processor_perflib.c cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases ...
2013-07-02Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver specific changes from Arnd Bergmann: "These changes are all driver specific and cross over between arm-soc contents and some other subsystem, in these cases cpufreq, crypto, dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have these changes merged through arm-soc. As we proceed to untangle the dependencies between platform code and driver code, the amount of changes in this category is fortunately shrinking, for 3.11 we have 16 branches here and 101 non-merge changesets, the majority of which are for the stedma40 dma engine driver used in the ux500 platform. Cleaning up that code touches multiple subsystems, but gets rid of the dependency in the end. The mailbox code moved out from mach-omap2 to drivers/mailbox is an intermediate step and is still omap specific at the moment. Patches exist to generalize the subsystem and add other drivers with the same API, but those did not make it for 3.11." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO ARM: ux500: Provide a AB8500 GPIO Device Tree node gpio: rcar: fix gpio_rcar_of_table gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections gpio-rcar: Reference core gpio documentation in the DT bindings clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung pinctrl: s3c24xx: use correct header for chained_irq functions ...
2013-06-28Merge branch 'pm-assorted'Rafael J. Wysocki
* pm-assorted: PM / QoS: Add pm_qos and dev_pm_qos to events-power.txt PM / QoS: Add dev_pm_qos_request tracepoints PM / QoS: Add pm_qos_request tracepoints PM / QoS: Add pm_qos_update_target/flags tracepoints PM / QoS: Update Documentation/power/pm_qos_interface.txt PM / Sleep: Print last wakeup source on failed wakeup_count write PM / QoS: correct the valid range of pm_qos_class PM / wakeup: Adjust messaging for wake events during suspend PM / Runtime: Update .runtime_idle() callback documentation PM / Runtime: Rework the "runtime idle" helper routine PM / Hibernate: print physical addresses consistently with other parts of kernel
2013-06-25Merge tag 'ux500-dma40-for-arm-soc-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/drivers From Linus Walleij: DMA40 fixes for earlier submitted driver patches: - Fix various error path and sparse bugs in the DMA40 driver - Fix various compile errors in the ux500 crypto driver (dependent on the DMA40 changes). * tag 'ux500-dma40-for-arm-soc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static dmaengine: ste_dma40: fix error return code in d40_probe() Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-24Merge tag 'davinci-for-v3.11/soc-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc From Sekhar Nori: DaVinci SoC updates for v3.11 - part 2 This pull request adds DT and runtime PM to EDMA ARM private API so it can be used on DT enabled DaVinci and OMAP platforms. Also adds DMA channel crossbar mapping support to be used by DT-enabled platforms which use it. * tag 'davinci-for-v3.11/soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding ARM: edma: Convert to devm_* api Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-24dmaengine: ste_dma40: Declare memcpy config as staticFabio Baltieri
Fix sparse warnings: drivers/dma/ste_dma40.c:81:26: warning: symbol 'dma40_memcpy_conf_phy' was not declared. Should it be static? drivers/dma/ste_dma40.c:95:26: warning: symbol 'dma40_memcpy_conf_log' was not declared. Should it be static? Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24dmaengine: edma: enable build for AM33XXMatt Porter
Enable TI EDMA option on OMAP and TI_PRIV_EDMA Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Joel A Fernandes <joelagnel@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-06-20Merge tag 'davinci-for-v3.11/soc-v2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc From Sekhar Nori: DaVinci SoC changes for v3.11 This pull request moves DaVinci EDMA library to arch/arm/common so it can be used by OMAP based AM335x. This is a temporary step until all drivers are converted to use the dmaengine driver in drivers/dma/edma.c. Several drivers like SPI, MMC/SD have already been converted. Some like audio are pending. The other two patches in the pull request are cleanup in nature. * tag 'davinci-for-v3.11/soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: edma: remove unused transfer controller handlers ARM: davinci: move private EDMA API to arm/common ARM: davinci: remove __init atrribute from function declaration Signed-off-by: Arnd Bergmann <arnd@arndb.de>