summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2012-05-26Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc device tree conversions (part 2) from Olof Johansson: "These continue the device tree work from part 1, this set is for the tegra, mxs and imx platforms, all of which have dependencies on clock or pinctrl changes submitted earlier." Fix up trivial conflicts due to nearby changes in drivers/{gpio/gpio,i2c/busses/i2c}-mxs.c * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: dt: tegra: invert status=disable vs status=okay ARM: dt: tegra: consistent basic property ordering ARM: dt: tegra: sort nodes based on bus order ARM: dt: tegra: remove duplicate device_type property ARM: dt: tegra: consistenly use lower-case for hex constants ARM: dt: tegra: format regs properties consistently ARM: dt: tegra: gpio comment cleanup ARM: dt: tegra: remove unnecessary unit addresses ARM: dt: tegra: whitespace cleanup ARM: dt: tegra cardhu: fix typo in SDHCI node name ARM: dt: tegra: cardhu: register core regulator tps62361 ARM: dt: tegra30.dtsi: Add SMMU node ARM: dt: tegra20.dtsi: Add GART node ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes ARM: dt: tegra: Add device tree support for AHB ARM: dts: enable audio support for imx28-evk ARM: dts: enable i2c device for imx28-evk i2c: mxs: add device tree probe support ARM: dts: enable mmc for imx28-evk ...
2012-05-26Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
2012-05-26Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc driver specific updates from Olof Johansson: "These changes are specific to some driver that may be used by multiple boards or socs. The most significant change in here is the move of the samsung iommu code from a platform specific in-kernel interface to the generic iommu subsystem." Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mmc: dt: Consolidate DT bindings iommu/exynos: Add iommu driver for EXYNOS Platforms ARM: davinci: optimize the DMA ISR ARM: davinci: implement DEBUG_LL port choice ARM: tegra: Add SMMU enabler in AHB ARM: tegra: Add Tegra AHB driver Input: pxa27x_keypad add choice to set direct_key_mask Input: pxa27x_keypad direct key may be low active Input: pxa27x_keypad bug fix for direct_key_mask Input: pxa27x_keypad keep clock on as wakeup source ARM: dt: tegra: pinmux changes for USB ULPI ARM: tegra: add USB ULPI PHY reset GPIO to device tree ARM: tegra: don't hard-code USB ULPI PHY reset_gpio ARM: tegra: change pll_p_out4's rate to 24MHz ARM: tegra: fix pclk rate ARM: tegra: reparent sclk to pll_c_out1 ARM: tegra: Add pllc clock init table ARM: dt: tegra cardhu: basic audio support ARM: dt: tegra30.dtsi: Add audio-related nodes ARM: tegra: add AUXDATA required for audio ...
2012-05-25Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "Nothing exciting this time, odd fixes in a bunch of drivers" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: at_hdmac: take maxburst from slave configuration dmaengine: at_hdmac: remove ATC_DEFAULT_CTRLA constant dmaengine: at_hdmac: remove some at_dma_slave comments dma: imx-sdma: make channel0 operations atomic dmaengine: Fixup dmaengine_prep_slave_single() to be actually useful dmaengine: Use dma_sg_len(sg) instead of sg->length dmaengine: Use sg_dma_address instead of sg_phys DMA: PL330: Remove duplicate header file inclusion dma: imx-sdma: keep the callbacks invoked in the tasklet dmaengine: dw_dma: add Device Tree probing capability dmaengine: dw_dmac: Add clk_{un}prepare() support dma/amba-pl08x: add support for the Nomadik variant dma/amba-pl08x: check for terminal count status only
2012-05-17Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes fromVinod Koul: "fixes of cylic dma usages in slave dma drivers" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: fix cyclic dma usage dmaengine: pl330: dont complete descriptor for cyclic dma
2012-05-16Merge branch 'clk-next' of git://git.linaro.org/people/mturquette/linux into ↵Arnd Bergmann
next/clock * 'clk-next' of git://git.linaro.org/people/mturquette/linux: clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ARM: Orion: SDIO: Add support for clk. ARM: Orion: NAND: Add support for clk, if there is one. ARM: Orion: EHCI: Add support for enabling clocks ARM: Orion: SATA: Add per channel clk/clkdev support. ARM: Orion: UART: Get the clock rate via clk_get_rate(). ARM: Orion: WDT: Add clk/clkdev support ARM: Orion: Eth: Add clk/clkdev support. ARM: Orion: SPI: Add clk/clkdev support. ARM: Orion: Add clocks using the generic clk infrastructure. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-15dmaengine: at_hdmac: take maxburst from slave configurationNicolas Ferre
The maxburst/chunk size was taken from the private slave DMA data structure. Use the common API provided by DMA_SLAVE_CONFIG to setup src/dst maxburst values. The ctrla field is not needed anymore in the slave private structure nor the header constants that were located in an architecture specific directory. The at91sam9g45_devices.c file that was using this platform data is also modified to remove this now useless data. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-15dmaengine: at_hdmac: remove ATC_DEFAULT_CTRLA constantNicolas Ferre
Not needed constant that was set to 0. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-15Merge branch 'fixes' into nextVinod Koul
2012-05-15dmaengine: fix cyclic dma usageVinod Koul
for cyclic dma, dont makr the descriptor as complte. Fix the remaining users of cyclic dma which do so Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Mika Westerberg <mika.westerberg@iki.fi>
2012-05-14Merge branch 'imx/dt/for-3.5' of ↵Arnd Bergmann
git://git.linaro.org/people/shawnguo/linux-2.6.git into next/dt2 Shawn Guo <shawn.guo@linaro.org> writes: I chose to base it on Sascha's imx-common-clk series than -rc, because otherwise it will keep patching clock file that has been removed by imx-common-clk series. It also depends on imx-pinctrl pull-request I just sent to be functional. Note: when imx-common-clk and imx-pinctrl get merged together, the following files will have conflicts. But the conflicts should not be so hard to resolve. [arnd: resolved those merge conflicts by pulling pinctrl branch] * imx/dt: (24 commits) ARM: dts: imx53-qsb: enable audio support ARM: dts: imx51-babbage: enable audio support ARM: imx: add audio codec clk lookup for imx53-qsb ARM: imx: add audmux pad setting for imx51-babbage ARM: imx: add more imx5 ssi clocks ARM: dts: imx53-qsb: Add Dialog DA9053 PMIC support ARM: dts: imx6q-sabrelite: add serial2 pinctrl support ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000 ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000 ARM: imx6q: add ssi1_ipg clk_lookup ARM: dts: imx6q-sabrelite: add audmux pinctrl support ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support ARM: dts: imx6q-sabrelite: add audmux device ARM: dts: imx6q-sabrelite: add ssi device ARM: dts: imx6q-arm2: add pinctrl state for usdhc ARM: imx6: Add UART2 for low-level debug ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled ARM: imx6q: move imx6q_sabrelite specific code to a dedicated function ARM: dts: imx6q-sabrelite: Add SPI NOR support ARM: dts: Add basic support for imx6q-sabresd ... Pulls in imx/pinctrl and imx/clock as dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'imx/pinctrl' into imx/dtArnd Bergmann
Conflicts: drivers/mmc/host/sdhci-esdhc-imx.c drivers/net/ethernet/freescale/fec.c drivers/spi/spi-imx.c drivers/tty/serial/imx.c This resolves some simply but annoying conflicts. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-12Merge tag 'ep93xx-fixes-for-3.5' of git://github.com/RyanMallon/linux-ep93xx ↵Olof Johansson
into next/drivers Branch has one driver feature and one board bug fix. Merging it as a driver branch. DMA driver change was later: Acked-by: Vinod Koul <vinod.koul@linux.intel.com> * tag 'ep93xx-fixes-for-3.5' of git://github.com/RyanMallon/linux-ep93xx: dmaengine/ep93xx_dma: Implement double buffering for M2M DMA channels arm: ep93xx: Don't try to release not acquired GPIO lines
2012-05-12dma: mxs-dma: add device tree probe supportDong Aisheng
Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Huang Shijie <b32955@freescale.com> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Vinod Koul <vinod.koul@intel.com>
2012-05-12dma: mxs-dma: make platform_device_id more genericShawn Guo
Rewrite mxs_dma_is_apbh and mxs_dma_is_apbx in order to support other SoCs like imx6q and reform the platform_device_id for the better further dt support. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Huang Shijie <b32955@freescale.com> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Vinod Koul <vinod.koul@intel.com>
2012-05-12dma: mxs-dma: let dma_is_apbh and apbh_is_old take parameterShawn Guo
Let macros dma_is_apbh and apbh_is_old take mxs_dma as parameter to make the code easy to read. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-12dma: mxs-dma: use global stmp_device functionalityDong Aisheng
This can get rid of the mach-dependency. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Huang Shijie <b32955@freescale.com> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Vinod Koul <vinod.koul@intel.com>
2012-05-11Merge branch 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann
into next/clock Shawn Guo <shawn.guo@linaro.org> writes: mxs common clk porting for v3.5. It depends on the following two branches. [1] git://git.linaro.org/people/mturquette/linux.git clk-next [2] http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm.git clkdev As the mxs device tree conversion will constantly touch clock files, to save the conflicts, the updated mxs/dt branch coming later will based on this pull-request. * 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: remove now unused timer_clk argument from mxs_timer_init ARM: mxs: remove old clock support ARM: mxs: switch to common clk framework ARM: mxs: change the lookup name for fec phy clock ARM: mxs: request clock for timer clk: mxs: add clock support for imx28 clk: mxs: add clock support for imx23 clk: mxs: add mxs specific clocks Includes an update to Linux 3.4-rc6 Conflicts: drivers/clk/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11dma: imx-sdma: make channel0 operations atomicRichard Zhao
device_prep_dma_cyclic may be call in audio trigger function which is atomic context, so we make it atomic too. - change channel0 lock to spinlock. - Use polling to wait for channel0 finish running. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11dmaengine: Use dma_sg_len(sg) instead of sg->lengthLars-Peter Clausen
sg->length may or may not contain the length of the dma region to transfer, depending on the architecture - dma_sg_len(sg) always will though. For the architectures which use the drivers modified by this patch it probably is the case that sg->length contains the dma transfer length. But to be consistent and future proof change them to use dma_sg_len. To quote Russel King: sg->length is meaningless to something performing DMA. In cases where sg_dma_len(sg) and sg->length are the same storage, then there's no problem. But scatterlists _can_ (and one some architectures) do split them - especially when you have an IOMMU which can allow you to combine a scatterlist into fewer entries. So, anything using sg->length for the size of a scatterlist's DMA transfer _after_ a call to dma_map_sg() is almost certainly buggy. The patch has been generated using the following coccinelle patch: <smpl> @@ struct scatterlist *sg; expression X; @@ -sg[X].length +sg_dma_len(&sg[X]) @@ struct scatterlist *sg; @@ -sg->length +sg_dma_len(sg) </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11dmaengine: Use sg_dma_address instead of sg_physLars-Peter Clausen
dmaengine drivers should always use sg_dma_address instead of sg_phys to get the addresses for the transfer from a sg element. To quote Russel King: sg_phys(sg) of course has nothing to do with DMA addresses. It's the physical address _to the CPU_ of the memory associated with the scatterlist entry. That may, or may not have the same value for the DMA engine, particularly if IOMMUs are involved. And if these drivers are used on ARM, they must be fixed, sooner rather than later. There's patches in the works which will mean we will end up with IOMMU support in the DMA mapping later, which means everything I've said above will become reality. The patch has been generated using the following coccinelle patch: <smpl> @@ struct scatterlist *sg; @@ -sg_phys(sg) +sg_dma_address(sg) </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11DMA: PL330: Remove duplicate header file inclusionSachin Kamat
Removes <linux/interrupt.h> file which was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11Merge branch 'fixes' into nextVinod Koul
2012-05-11dmaengine: pl330: dont complete descriptor for cyclic dmaVinod Koul
the cookie updates completed the cyclic dma descriptor wrongly. This caused the BUG_ON to be hit as submit is called for completed descriptor Fix this by not marking the cyclic descriptor as complete Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org>
2012-05-11dma: imx-sdma: keep the callbacks invoked in the taskletHuang Shijie
The current code keeps the callbacks invoked from interrupt context, this does not conform to the Documentation/dmaengine.txt. So add tasklet support to fix this issue. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11dmaengine: dw_dma: add Device Tree probing capabilityViresh Kumar
SPEAr platforms now support DT and so must convert all drivers to support DT. This patch adds DT probing support for Synopsys DMA controller and updates its documentation too. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11dmaengine: dw_dmac: Add clk_{un}prepare() supportViresh Kumar
clk_{un}prepare is mandatory for platforms using common clock framework. Since this driver is used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for it. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-08ARM: Orion: XOR: Add support for clkAndrew Lunn
Some orion platforms can gate the XOR driver clock. If the clock exisits, unable/disable it as appropriate. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-04-26Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull [GIT PULL] slave-dmaengine fixes from Vinod Koul. * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine/amba-pl08x : reset phychan_hold on terminate all dma: pl330: fix a couple of compilation warnings dma/ste_dma40: fix erroneous comparison dma/ste_dma40: explicitly include regulator consumer header dma40: Improve the logic of stopping logical chan dmaengine: at_hdmac: remove clear-on-read in atc_dostart() dma: mxs-dma: enable channel in device_issue_pending call dmaengine: imx-dma: dont complete descriptor for cyclic dma
2012-04-25dmaengine i.MX ipu: clk_prepare/unprepare clockSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-25dmaengine i.MX SDMA: do not depend on grouped clocksSascha Hauer
the current i.MX clock support groups together unrelated clocks to a single clock which is then used by the driver. This can't be accomplished with the generic clock framework so we instead request the individual clocks in the driver. For i.MX there are generally three different clocks: ipg: bus clock (needed to access registers) ahb: dma relevant clock, sometimes referred to as hclk in the datasheet per: bit clock, pixel clock This patch changes the driver to request the individual clocks. Currently all clk_get will get the same clock until the SoCs are converted to the generic clock framework Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-25Merge branch 'fixes' into nextVinod Koul
2012-04-25dma/amba-pl08x: add support for the Nomadik variantLinus Walleij
The Nomadik PL080 variant has some extra protection bits that may be set, so we need to check these bits to see if the channels are actually available for the DMAengine to use. Cc: Russell King <linux@arm.linux.org.uk> Cc: Alim Akhtar <alim.akhtar@gmail.com> Cc: Alessandro Rubini <rubini@gnudd.com> Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-25dmaengine/amba-pl08x : reset phychan_hold on terminate allDavide Ciminaghi
When a client calls pl08x_control with DMA_TERMINATE_ALL, it is correct to terminate and release the phy channel currently in use (if one is in use), but the phychan_hold counter must also be reset (otherwise it could get trapped in an unbalanced state). Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-25dma: pl330: fix a couple of compilation warningsOlof Johansson
Move a couple of tests and do a minor refactor to avoid: drivers/dma/pl330.c: In function 'pl330_probe': drivers/dma/pl330.c:2929:215: warning: comparison of distinct pointer types lacks a cast [enabled by default] drivers/dma/pl330.c: In function 'pl330_tasklet': drivers/dma/pl330.c:2250:8: warning: 'pch' may be used uninitialized in this function [-Wuninitialized] drivers/dma/pl330.c:2228:25: note: 'pch' was declared here drivers/dma/pl330.c:2277:130: warning: 'pch' may be used uninitialized in this function [-Wuninitialized] drivers/dma/pl330.c:2260:25: note: 'pch' was declared here Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-23dma/amba-pl08x: check for terminal count status onlyLinus Walleij
For some reason I can't figure out we're reading the PL080_INT_STATUS register instead of PL080_TC_STATUS when checking for the terminal count. The PL080_INT_STATUS is a logical OR between the error and terminal count status register and may not report what we want it to, especially if there is an error and a terminal count at the same time and the former is not lowered in time for the check in the TC register. Make sure we read what we're actually interested in. Cc: Russell King <linux@arm.linux.org.uk> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Alim Akhtar <alim.akhtar@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-23dma/ste_dma40: fix erroneous comparisonLinus Walleij
A small fallout from Vinod's conversions to dma_transfer_direction, this small comparison was done with a dma_data_direction instead. Fix it by comparing against the correct enum. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-23dma/ste_dma40: explicitly include regulator consumer headerLinus Walleij
The patch "ARM: amba: Remove AMBA level regulator support" breaks the DMA40 driver since the <linux/amba/bus.h> header implicitly included the regulator consumer header. So include it explicitly and fix the build error. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-23dma40: Improve the logic of stopping logical chanNarayanan G
can be directly stopped by issuing a SUSPEND_REQ on the EE bits. There is no need to suspend the physical channel and restart it. Also, the support for pre-V2 hw is discontinued. EE bits for writing: 00: disable only if AS=11 or AS=00 01: enable 10: suspend_req only if AS=01 & EE=01 or EE=11 11: round / no change for writing Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-20dmaengine: at_hdmac: remove clear-on-read in atc_dostart()Nicolas Ferre
This loop on EBCISR register was designed to clear IRQ sources before enabling a DMA channel. This register is clear-on-read so a race condition can appear if another channel is already active and has just finished its transfer. Removing this read on EBCISR is fixing the issue as there is no case where an IRQ could be pending: we already make sure that this register is drained at probe() time and during resume. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-20dma: mxs-dma: enable channel in device_issue_pending callShawn Guo
Enable channel in device_issue_pending call, so that the order between cookie assignment and channel enabling can be ensured naturally. It fixes the mxs gpmi-nand breakage which is caused by the incorrect order of cookie assigning and channel enabling. Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Huang Shijie <b32955@freescale.com> Tested-by <samgandhi9@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-20dmaengine: imx-dma: dont complete descriptor for cyclic dmaVinod Koul
the cookie updates completed the cyclic dma descriptor wrongly. This caused the BUG_ON to be hit as submit is called for completed descriptor Fix this by not marking the cyclic descriptor as complete Tested-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-19dmaengine/ep93xx_dma: Implement double buffering for M2M DMA channelsRafal Prylowski
Add double buffering support for M2M DMA channels. Implement this by using EP93xx M2M DMA Buffer and Control Finite State Machines to be sure that we are not disabling the channel when it's actually operating. Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl> Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-04-17dmaengine: Kconfig: fix Atmel at_hdmac entryNicolas Ferre
Remove SoC dependency and make it generic for every Atmel ARM AT91. That will allow to select this driver for newer chips. Keep dependency on AT91 because of the use of an header file located in include/mach directory. Modify the comment to reflect this. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-10Merge tag 'dmaengine-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine Pull dmaengine fixes from Dan Williams: 1/ regression fix for Xen as it now trips over a broken assumption about the dma address size on 32-bit builds 2/ new quirk for netdma to ignore dma channels that cannot meet netdma alignment requirements 3/ fixes for two long standing issues in ioatdma (ring size overflow) and iop-adma (potential stack corruption) * tag 'dmaengine-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine: netdma: adding alignment check for NETDMA ops ioatdma: DMA copy alignment needed to address IOAT DMA silicon errata ioat: ring size variables need to be 32bit to avoid overflow iop-adma: Corrected array overflow in RAID6 Xscale(R) test. ioat: fix size of 'completion' for Xen
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05netdma: adding alignment check for NETDMA opsDave Jiang
This is the fallout from adding memcpy alignment workaround for certain IOATDMA hardware. NetDMA will only use DMA engine that can handle byte align ops. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05ioatdma: DMA copy alignment needed to address IOAT DMA silicon errataDave Jiang
Silicon errata where when RAID and legacy descriptors are mixed, the legacy (memcpy and friends) operation must have alignment of 64 bytes to avoid hanging. This effects Intel Xeon C55xx, C35xx, E5-2600. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-04-05ioat: ring size variables need to be 32bit to avoid overflowDave Jiang
The alloc order can be up to 16 and 1 << 16 will over flow the 16bit integer. Change the appropriate variables to 16bit to avoid overflow. Reported-by: Jim Harris <james.r.harris@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>