summaryrefslogtreecommitdiff
path: root/drivers/edac/edac_mc_sysfs.c
AgeCommit message (Collapse)Author
2013-05-09EDAC: Don't give write permission to read-only filesSrivatsa S. Bhat
I get the following warning on boot: ------------[ cut here ]------------ WARNING: at drivers/base/core.c:575 device_create_file+0x9a/0xa0() Hardware name: -[8737R2A]- Write permission without 'store' ... </snip> Drilling down, this is related to dynamic channel ce_count attribute files sporting a S_IWUSR mode without a ->store() function. Looking around, it appears that they aren't supposed to have a ->store() function. So remove the bogus write permission to get rid of the warning. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: <stable@vger.kernel.org> # 3.[89] [ shorten commit message ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-25EDAC, mc_sysfs.c: Fix string array pointer typesBorislav Petkov
Those should be const ptr to a const string, fix them. Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-16EDAC: Merge mci.mem_is_per_rank with mci.csbasedMauro Carvalho Chehab
Both mci.mem_is_per_rank and mci.csbased denote the same thing: the memory controller is csrows based. Merge both fields into one. There's no need for the driver to actually fill it, as the core detects it by checking if one of the layers has the csrows type as part of the memory hierarchy: if (layers[i].type == EDAC_MC_LAYER_CHIP_SELECT) per_rank = true; Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-16amd64_edac: Correct DIMM sizesMauro Carvalho Chehab
We were filling the csrow size with a wrong value. 16a528ee3975 ("EDAC: Fix csrow size reported in sysfs") tried to address the issue. It fixed the report with the old API but not with the new one. Correct it for the new API too. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> [ make it a per-csrow accounting regardless of ->channel_count ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-05EDAC: Make sysfs functions staticStephen Hemminger
Fixes lots of sparse warnings here. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-02-21edac: better report error conditions in debug modeMauro Carvalho Chehab
It is hard to find what's wrong without a proper error report. Improve it, in debug mode. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21edac: only create sdram_scrub_rate where supportedMauro Carvalho Chehab
Currently, sdram_scrub_rate sysfs node is created even if the device doesn't support get/set the scub rate. Change the logic to only create this device node when the operation is supported. Reported-by: Felipe Balbi <balbi@ti.com> Acked-by: Borislav Petkov <bp@suse.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-07EDAC: Cleanup device deregistering pathLans Zhang
Use device_unregister to replace put_device + device_del for cleanup, and fix the potential use after free. Signed-off-by: Lans Zhang <jia.zhang@windriver.com> Signed-off-by: Borislav Petkov <bp@alien8.de>
2013-01-07EDAC: Fix kernel panic on module unloadingKonstantin Khlebnikov
This patch fixes use-after-free and double-free bugs in edac_mc_sysfs_exit(). mci_pdev has single reference and put_device() calls mc_attr_release() which calls kfree(). The following device_del() works with already released memory. An another kfree() in edac_mc_sysfs_exit() releses the same memory again. Great. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: stable@vger.kernel.org # 3.[67] Cc: Denis Kirjanov <kirjanov@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Link: http://lkml.kernel.org/r/20121214110310.11019.21098.stgit@zurg Signed-off-by: Borislav Petkov <bp@alien8.de>
2012-11-28EDAC: Handle error path in edac_mc_sysfs_init() properlyDenis Kirjanov
Make sure proper deregistration happens on all error paths in edac_mc_sysfs_init. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> [ Boris: cleanup and concretize commit message ] Signed-off-by: Borislav Petkov <bp@alien8.de>
2012-11-28EDAC: Convert to use simple_open()Wei Yongjun
This removes an open coded simple_open() function and replaces file operations references to the function with simple_open() instead. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28EDAC: Fix mc size reported in sysfsJosh Hunt
This is the complement to previous commit "EDAC: Fix csrow size reported in sysfs". This fixes the memory controller size reporting on csrow-based memory controllers. The csrow size is already combined for both channels. Without this patch memory size is reported doubled. Signed-off-by: Josh Hunt <johunt@akamai.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28EDAC: Fix csrow size reported in sysfsBorislav Petkov
On csrow-based memory controllers, we combine the csrow size from both channels and there's no need to do that again in csrow_size_show which leads to double the size of a csrow. Fix it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28EDAC: Pass mci parentBorislav Petkov
Initialize the mem_ctl_info descriptor of a csrow properly. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-06-27edac: allow specifying the error count with fake_injectMauro Carvalho Chehab
In order to test if the error counters are properly incremented, add a way to specify how many errors were generated by a trace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-12edac: create top-level debugfs directoryRob Herring
Create a single, top-level "edac" directory for debugfs. An "mc[0-N]" directory is then created for each memory controller. Individual drivers can create additional entries such as h/w error injection control. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-12edac: edac_mc_handle_error(): add an error_count parameterMauro Carvalho Chehab
In order to avoid loosing error events, it is desirable to group error events together and generate a single trace for several identical errors. The trace API already allows reporting multiple errors. Change the handle_error function to also allow that. The changes at the drivers were made by this small script: $file .=$_ while (<>); $file =~ s/(edac_mc_handle_error)\s*\(([^\,]+)\,([^\,]+)\,/$1($2,$3, 1,/g; print $file; Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: remove arch-specific parameter for the error handlerMauro Carvalho Chehab
Remove the arch-dependent parameter, as it were not used, as the MCE tracepoint weren't implemented. It probably doesn't make sense to have an MCE-specific tracepoint, as this will cost more bytes at the tracepoint, and tracepoint is not free. The changes at the EDAC drivers were done by this small perl script: $file .=$_ while (<>); $file =~ s/(edac_mc_handle_error)\s*\(([^\;]+)\,([^\,\)]+)\s*\)/$1($2)/g; print $file; Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac_mc: Cleanup per-dimm_info debug messagesMauro Carvalho Chehab
The edac_mc_alloc() routine allocates one dimm_info device for all possible memories, including the non-filled ones. The debug messages there are somewhat confusing. So, cleans them, by moving the code that prints the memory location to edac_mc, and using it on both edac_mc_sysfs and edac_mc. Also, only dumps information when DIMM/ranks are actually filled. After this patch, a dimm-based memory controller will print the debug info as: [ 1011.380027] EDAC DEBUG: edac_mc_dump_csrow: csrow->csrow_idx = 0 [ 1011.380029] EDAC DEBUG: edac_mc_dump_csrow: csrow = ffff8801169be000 [ 1011.380031] EDAC DEBUG: edac_mc_dump_csrow: csrow->first_page = 0x0 [ 1011.380032] EDAC DEBUG: edac_mc_dump_csrow: csrow->last_page = 0x0 [ 1011.380034] EDAC DEBUG: edac_mc_dump_csrow: csrow->page_mask = 0x0 [ 1011.380035] EDAC DEBUG: edac_mc_dump_csrow: csrow->nr_channels = 3 [ 1011.380037] EDAC DEBUG: edac_mc_dump_csrow: csrow->channels = ffff8801149c2840 [ 1011.380039] EDAC DEBUG: edac_mc_dump_csrow: csrow->mci = ffff880117426000 [ 1011.380041] EDAC DEBUG: edac_mc_dump_channel: channel->chan_idx = 0 [ 1011.380042] EDAC DEBUG: edac_mc_dump_channel: channel = ffff8801149c2860 [ 1011.380044] EDAC DEBUG: edac_mc_dump_channel: channel->csrow = ffff8801169be000 [ 1011.380046] EDAC DEBUG: edac_mc_dump_channel: channel->dimm = ffff88010fe90400 ... [ 1011.380095] EDAC DEBUG: edac_mc_dump_dimm: dimm0: channel 0 slot 0 mapped as virtual row 0, chan 0 [ 1011.380097] EDAC DEBUG: edac_mc_dump_dimm: dimm = ffff88010fe90400 [ 1011.380099] EDAC DEBUG: edac_mc_dump_dimm: dimm->label = 'CPU#0Channel#0_DIMM#0' [ 1011.380101] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 [ 1011.380103] EDAC DEBUG: edac_mc_dump_dimm: dimm->grain = 8 [ 1011.380104] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 ... (a rank-based memory controller would print, instead of "dimm?", "rank?" on the above debug info) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Convert debugfX to edac_dbg(X,Joe Perches
Use a more common debugging style. Remove __FILE__ uses, add missing newlines, coalesce formats and align arguments. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Don't add __func__ or __FILE__ for debugf[0-9] msgsMauro Carvalho Chehab
The debug macro already adds that. Most of the work here was made by this small script: $f .=$_ while (<>); $f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*": /\1"/g; $f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*/\1/g; $f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*"MC: /\1"/g; $f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g; $f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g; $f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g; $f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g; $f =~ s/\"MC\: \\n\"/"MC:\\n"/g; print $f; After running the script, manual cleanups were done to fix it the remaining places. While here, removed the __LINE__ on most places, as it doesn't actually give useful info on most places. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: change the mem allocation scheme to make Documentation/kobject.txt happyMauro Carvalho Chehab
Kernel kobjects have rigid rules: each container object should be dynamically allocated, and can't be allocated into a single kmalloc. EDAC never obeyed this rule: it has a single malloc function that allocates all needed data into a single kzalloc. As this is not accepted anymore, change the allocation schema of the EDAC *_info structs to enforce this Kernel standard. Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Only expose csrows/channels on legacy API if they're populatedMauro Carvalho Chehab
This patch actually fixes a bug with the legacy API, where, at the same csrow, some channels may have different DIMMs. This can happen on FB-DIMM/RAMBUS and modern Intel controllers. This is the case, for example, of Nehalem machines: $ ./edac-ctl --layout +-----------------------------------+ | mc0 | | channel0 | channel1 | channel2 | -------+-----------------------------------+ slot2: | 0 MB | 0 MB | 0 MB | slot1: | 1024 MB | 0 MB | 0 MB | slot0: | 1024 MB | 1024 MB | 1024 MB | -------+-----------------------------------+ Before this patch, non-filled memories were shown. Now, only what's filled is there: grep . /sys/devices/system/edac/mc/mc0/csrow*/ch?* /sys/devices/system/edac/mc/mc0/csrow0/ch0_ce_count:0 /sys/devices/system/edac/mc/mc0/csrow0/ch0_dimm_label:CPU#0Channel#0_DIMM#0 /sys/devices/system/edac/mc/mc0/csrow0/ch1_ce_count:0 /sys/devices/system/edac/mc/mc0/csrow0/ch1_dimm_label:CPU#0Channel#0_DIMM#1 /sys/devices/system/edac/mc/mc0/csrow1/ch0_ce_count:0 /sys/devices/system/edac/mc/mc0/csrow1/ch0_dimm_label:CPU#0Channel#1_DIMM#0 /sys/devices/system/edac/mc/mc0/csrow2/ch0_ce_count:0 /sys/devices/system/edac/mc/mc0/csrow2/ch0_dimm_label:CPU#0Channel#2_DIMM#0 Thanks-to: Aristeu Rozanski Filho <arozansk@redhat.com> Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Add debufs nodes to allow doing fake error injectMauro Carvalho Chehab
Sometimes, it is useful to have a mechanism that generates fake errors, in order to test the EDAC core code, and the userspace tools. Provide such mechanism by adding a few debugfs nodes. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: add a sysfs node to report the maximum location for the systemMauro Carvalho Chehab
The userspace tools need to know what's the maximum location on each system, as it helps to create nice maps showing how the memory was filled at the system. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: add a new per-dimm API and make the old per-virtual-rank API obsoleteMauro Carvalho Chehab
The old EDAC API is broken. It only works fine for systems manufatured before 2005 and for AMD 64. The reason is that it forces all memory controller drivers to discover rank info. Also, it doesn't allow grouping the several ranks into a DIMM. So, what almost all modern drivers do is to create a fake virtual-rank information, and use it to cheat the EDAC core to accept the driver. While this works if the user has enough time to discover what DIMM slot corresponds to each "virtual-rank" information, it prevents EDAC usage for users with less available time. It also makes life hard for vendors that may want to provide a table with their motherboards to the userspace tool (edac-utils) as each driver has its own logic for the virtual mapping. So, the old API should be removed, in favor of a more flexible API that allows newer drivers to not lie to the EDAC core. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: rewrite the sysfs code to use struct deviceMauro Carvalho Chehab
The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Rename the parent dev to pdevMauro Carvalho Chehab
As EDAC doesn't use struct device itself, it created a parent dev pointer called as "pdev". Now that we'll be converting it to use struct device, instead of struct devsys, this needs to be fixed. No functional changes. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28edac: Initialize the dimm label with the known informationMauro Carvalho Chehab
While userspace doesn't fill the dimm labels, add there the dimm location, as described by the used memory model. This could eventually match what is described at the dmidecode, making easier for people to identify the memory. For example, on an Intel motherboard where the DMI table is reliable, the first memory stick is described as: Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: A1_DIMM0 Bank Locator: A1_Node0_Channel0_Dimm0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 800 MHz Manufacturer: A1_Manufacturer0 Serial Number: A1_SerNum0 Asset Tag: A1_AssetTagNum0 Part Number: A1_PartNum0 The memory named as "A1_DIMM0" is physically located at the first memory controller (node 0), at channel 0, dimm slot 0. After this patch, the memory label will be filled with: /sys/devices/system/edac/mc/csrow0/ch0_dimm_label:mc#0channel#0slot#0 And (after the new EDAC API patches) as: /sys/devices/system/edac/mc/mc0/dimm0/dimm_label:mc#0channel#0slot#0 So, even if the memory label is not initialized on userspace, an useful information with the error location is filled there, expecially since several systems/motherboards are provided with enough info to map from channel/slot (or branch/channel/slot) into the DIMM label. So, letting the EDAC core fill it by default is a good thing. It should noticed that, as the label filling happens at the edac_mc_alloc(), drivers can override it to better describe the memories (and some actually do it). Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28edac: move nr_pages to dimm structMauro Carvalho Chehab
The number of pages is a dimm property. Move it to the dimm struct. After this change, it is possible to add sysfs nodes for the DIMM's that will properly represent the DIMM stick properties, including its size. A TODO fix here is to properly represent dual-rank/quad-rank DIMMs when the memory controller represents the memory via chip select rows. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28edac: move dimm properties to struct dimm_infoMauro Carvalho Chehab
On systems based on chip select rows, all channels need to use memories with the same properties, otherwise the memories on channels A and B won't be recognized. However, such assumption is not true for all types of memory controllers. Controllers for FB-DIMM's don't have such requirements. Also, modern Intel controllers seem to be capable of handling such differences. So, we need to get rid of storing the DIMM information into a per-csrow data, storing it, instead at the right place. The first step is to move grain, mtype, dtype and edac_mode to the per-dimm struct. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: James Bottomley <James.Bottomley@parallels.com> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Mike Williams <mike@mikebwilliams.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28edac: Create a dimm struct and move the labels into itMauro Carvalho Chehab
The way a DIMM is currently represented implies that they're linked into a per-csrow struct. However, some drivers don't see csrows, as they're ridden behind some chip like the AMB's on FBDIMM's, for example. This forced drivers to fake^Wvirtualize a csrow struct, and to create a mess under csrow/channel original's concept. Move the DIMM labels into a per-DIMM struct, and add there the real location of the socket, in terms of csrow/channel. Latter patches will modify the location to properly represent the memory architecture. All other drivers will use a per-csrow type of location. Some of those drivers will require a latter conversion, as they also fake the csrows internally. TODO: While this patch doesn't change the existing behavior, on csrows-based memory controllers, a csrow/channel pair points to a memory rank. There's a known bug at the EDAC core that allows having different labels for the same DIMM, if it has more than one rank. A latter patch is need to merge the several ranks for a DIMM into the same dimm_info struct, in order to avoid having different labels for the same DIMM. The edac_mc_alloc() will now contain a per-dimm initialization loop that will be changed by latter patches in order to match other types of memory architectures. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19EDAC: Correct scrub rate APIBorislav Petkov
The original scrub rate API definition states that if scrub rate accessors are not implemented, a negative value (-1) should be written to the sysfs file (/sys/devices/system/edac/mc/mc<N>/sdram_scrub_rate, where N is the memory controller number on the system). This is counter-intuitive and awkward at the very least because, when setting the scrub rate, userspace has to write to sysfs and then read it back to check error status of the operation. As Tony notes, best it would be to not have the sdram_scrub_rate in sysfs if scrub rate support is not implemented. It is too late about that and a bunch of drivers on a bunch of arches would need to be changed and tested which is not a trivial task ATM. Instead, settle for the next best thing of returning -ENODEV when implementation is missing and -EINVAL when there was an error encountered while setting the scrub rate. Reported-by: Han Pingtian <phan@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20110916105856.GA13253@hpt.nay.redhat.com Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-12-14edac: convert sysdev_class to a regular subsystemKay Sievers
After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Cc: Doug Thompson <dougthompson@xmission.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-21EDAC: Remove debugging output in scrub rate handlingMarkus Trippelsdorf
This patch removes superfluous debugging output in the sysfs scrub rate handler. It also consolidates the error handling in the scrub rate accessors. Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-17EDAC: Shut up sysfs registration debug codeBorislav Petkov
Raise the debug level of these routines so that their output get issued out only when the highest debug level is selected. Otherwise, don't pollute driver debug output. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC: Fixup scrubrate manipulationBorislav Petkov
Make the ->{get|set}_sdram_scrub_rate return the actual scrub rate bandwidth it succeeded setting and remove superfluous arg pointer used for that. A negative value returned still means that an error occurred while setting the scrubrate. Document this for future reference. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-10-26Merge branch 'linux_next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core: (34 commits) i7core_edac: return -ENODEV when devices were already probed i7core_edac: properly terminate pci_dev_table i7core_edac: Avoid PCI refcount to reach zero on successive load/reload i7core_edac: Fix refcount error at PCI devices i7core_edac: it is safe to i7core_unregister_mci() when mci=NULL i7core_edac: Fix an oops at i7core probe i7core_edac: Remove unused member channels in i7core_pvt i7core_edac: Remove unused arg csrow from get_dimm_config i7core_edac: Reduce args of i7core_register_mci i7core_edac: Introduce i7core_unregister_mci i7core_edac: Use saved pointers i7core_edac: Check probe counter in i7core_remove i7core_edac: Call pci_dev_put() when alloc_i7core_dev() failed i7core_edac: Fix error path of i7core_register_mci i7core_edac: Fix order of lines in i7core_register_mci i7core_edac: Always do get/put for all devices i7core_edac: Introduce i7core_pci_ctl_create/release i7core_edac: Introduce free_i7core_dev i7core_edac: Introduce alloc_i7core_dev i7core_edac: Reduce args of i7core_get_onedevice ...
2010-10-24i7core_edac: don't use a freed mci structMauro Carvalho Chehab
This is a nasty bug. Since kobject count will be reduced by zero by edac_mc_del_mc(), and this triggers the kobj release method, the mci memory will be freed automatically. So, all we have left is ctl_name, as shown by enabling debug: [ 80.822186] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 1020: edac_remove_sysfs_mci_device() remove_link [ 80.832590] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 1024: edac_remove_sysfs_mci_device() remove_mci_instance [ 80.843776] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 640: edac_mci_control_release() mci instance idx=0 releasing [ 80.855163] EDAC MC: Removed device 0 for i7core_edac.c i7 core #0: DEV 0000:3f:03.0 [ 80.862936] EDAC DEBUG: in drivers/edac/i7core_edac.c, line at 2089: (null): free structs [ 80.871134] EDAC DEBUG: in drivers/edac/edac_mc.c, line at 238: edac_mc_free() [ 80.878379] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 726: edac_mc_unregister_sysfs_main_kobj() [ 80.888043] EDAC DEBUG: in drivers/edac/i7core_edac.c, line at 1232: drivers/edac/i7core_edac.c: i7core_put_devices() Also, kfree(mci) shouldn't happen at the kobj.release, as it happens when edac_remove_sysfs_mci_device() is called, but the logic is: edac_remove_sysfs_mci_device(mci); edac_printk(KERN_INFO, EDAC_MC, "Removed device %d for %s %s: DEV %s\n", mci->mc_idx, mci->mod_name, mci->ctl_name, edac_dev_name(mci)); So, as the edac_printk() needs the mci struct, this generates an OOPS. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-24edac_core: Print debug messages at release callsMauro Carvalho Chehab
This is important to track a nasty bug at the free logic. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-24edac_core: Don't let free(mci) happen while using itMauro Carvalho Chehab
A very nasty bug were happening on edac core, due to the way mci objects are freed. mci memory is freed when kobject count reaches zero, by edac_mci_control_release(). However, from the logs, this is clearly happening before the final usage of mci struct: [15799.607454] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 640: edac_mci_control_release() mci instance idx=0 releasing [15799.618773] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 769: edac_inst_grp_release() [15799.627326] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 894: edac_remove_mci_instance_attributes() end of seeking for group all_channel_counts [15799.640887] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 877: edac_remove_mci_instance_attributes() sysfs_attrib = ffffffffa01d7240 [15799.653412] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 1020: edac_remove_sysfs_mci_device() remove_link [15799.663753] EDAC DEBUG: in drivers/edac/edac_mc_sysfs.c, line at 1024: edac_remove_sysfs_mci_device() remove_mci_instance Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-24edac_core: Do a better job with node removalMauro Carvalho Chehab
Make sure we remove groups at the right order Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-24i7core_edac: Properly mark const static vars as suchMauro Carvalho Chehab
There are two groups of sysfs attributes: one for rdimm and another for udimm. Instead of changing dynamically the unique static struct for handling udimm's, declare two vars and make them constant. This avoids the risk of having two or more memory controllers, each needing a different set of attributes. While here, use const on all places where it is applicable. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> edac_core: use const for constant sysfs arguments Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21EDAC: Export edac sysfs class to users.Borislav Petkov
Move toplevel sysfs class to the stub and make it available to non-modularized code too. Add proper refcounting of its users and move the registration functionality into the reference counting routines. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-10-21EDAC: Fix error returnBorislav Petkov
We should return a negative value when we cannot get the toplevel edac sysfs class. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-08-03edac, mc: Improve scrub rate handlingBorislav Petkov
Fortify the interface to not accept negative values, remove memctrl_int_store() as a result. Also, sanitize bandwidth setting by making the argument a simple u32 instead of strange u32 pointer being passed around for no obvious reason. Then, fix error handling and teach it to return proper error values. Finally, make code more readable, simplify debug messages. Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Arthur Jones <ajones@riverbed.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Doug Thompson <dougthompson@xmission.com>
2010-05-10edac: Create an unique instance for each kobjMauro Carvalho Chehab
Current code only works when there's just one memory controller, since we need one kobj for each instance. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-10edac: Don't create csrow entries on instance groupsMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-10edac: store/show methods for device groups weren't workingMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>