summaryrefslogtreecommitdiff
path: root/drivers/edac
AgeCommit message (Collapse)Author
2012-10-24amd64_edac:__amd64_set_scrub_rate(): avoid overindexing scrubrates[]Andrew Morton
If none of the elements in scrubrates[] matches, this loop will cause __amd64_set_scrub_rate() to incorrectly use the n+1th element. As the function is designed to use the final scrubrates[] element in the case of no match, we can fix this bug by simply terminating the array search at the n-1th element. Boris: this code is fragile anyway, see here why: http://marc.info/?l=linux-kernel&m=135102834131236&w=2 It will be rewritten more robustly soonish. Reported-by: Denis Kirjanov <kirjanov@gmail.com> Cc: stable@vger.kernel.org Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-05Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "Some highlights in addition to the usual batch of fixes: - 64TB address space support for 64-bit processes by Aneesh Kumar - Gavin Shan did a major cleanup & re-organization of our EEH support code (IBM fancy PCI error handling & recovery infrastructure) which paves the way for supporting different platform backends, along with some rework of the PCIe code for the PowerNV platform in order to remove home made resource allocations and instead use the generic code (which is possible after some small improvements to it done by Gavin). - Uprobes support by Ananth N Mavinakayanahalli - A pile of embedded updates from Freescale folks, including new SoC and board supports, more KVM stuff including preparing for 64-bit BookE KVM support, ePAPR 1.1 updates, etc..." Fixup trivial conflicts in drivers/scsi/ipr.c * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc/iommu: Fix multiple issues with IOMMU pools code powerpc: Fix VMX fix for memcpy case driver/mtd:IFC NAND:Initialise internal SRAM before any write powerpc/fsl-pci: use 'Header Type' to identify PCIE mode powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get powerpc: Remove tlb batching hack for nighthawk powerpc: Set paca->data_offset = 0 for boot cpu powerpc/perf: Sample only if SIAR-Valid bit is set in P7+ powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled powerpc/mpc85xx: Update interrupt handling for IFC controller powerpc/85xx: Enable USB support in p1023rds_defconfig powerpc/smp: Do not disable IPI interrupts during suspend powerpc/eeh: Fix crash on converting OF node to edev powerpc/eeh: Lock module while handling EEH event powerpc/kprobe: Don't emulate store when kprobe stwu r1 powerpc/kprobe: Complete kprobe and migrate exception frame powerpc/kprobe: Introduce a new thread flag powerpc: Remove unused __get_user64() and __put_user64() powerpc/eeh: Global mutex to protect PE tree powerpc/eeh: Remove EEH PE for normal PCI hotplug ...
2012-10-02Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue changes from Tejun Heo: "This is workqueue updates for v3.7-rc1. A lot of activities this round including considerable API and behavior cleanups. * delayed_work combines a timer and a work item. The handling of the timer part has always been a bit clunky leading to confusing cancelation API with weird corner-case behaviors. delayed_work is updated to use new IRQ safe timer and cancelation now works as expected. * Another deficiency of delayed_work was lack of the counterpart of mod_timer() which led to cancel+queue combinations or open-coded timer+work usages. mod_delayed_work[_on]() are added. These two delayed_work changes make delayed_work provide interface and behave like timer which is executed with process context. * A work item could be executed concurrently on multiple CPUs, which is rather unintuitive and made flush_work() behavior confusing and half-broken under certain circumstances. This problem doesn't exist for non-reentrant workqueues. While non-reentrancy check isn't free, the overhead is incurred only when a work item bounces across different CPUs and even in simulated pathological scenario the overhead isn't too high. All workqueues are made non-reentrant. This removes the distinction between flush_[delayed_]work() and flush_[delayed_]_work_sync(). The former is now as strong as the latter and the specified work item is guaranteed to have finished execution of any previous queueing on return. * In addition to the various bug fixes, Lai redid and simplified CPU hotplug handling significantly. * Joonsoo introduced system_highpri_wq and used it during CPU hotplug. There are two merge commits - one to pull in IRQ safe timer from tip/timers/core and the other to pull in CPU hotplug fixes from wq/for-3.6-fixes as Lai's hotplug restructuring depended on them." Fixed a number of trivial conflicts, but the more interesting conflicts were silent ones where the deprecated interfaces had been used by new code in the merge window, and thus didn't cause any real data conflicts. Tejun pointed out a few of them, I fixed a couple more. * 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits) workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending() workqueue: use cwq_set_max_active() helper for workqueue_set_max_active() workqueue: introduce cwq_set_max_active() helper for thaw_workqueues() workqueue: remove @delayed from cwq_dec_nr_in_flight() workqueue: fix possible stall on try_to_grab_pending() of a delayed work item workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback() workqueue: use __cpuinit instead of __devinit for cpu callbacks workqueue: rename manager_mutex to assoc_mutex workqueue: WORKER_REBIND is no longer necessary for idle rebinding workqueue: WORKER_REBIND is no longer necessary for busy rebinding workqueue: reimplement idle worker rebinding workqueue: deprecate __cancel_delayed_work() workqueue: reimplement cancel_delayed_work() using try_to_grab_pending() workqueue: use mod_delayed_work() instead of __cancel + queue workqueue: use irqsafe timer for delayed_work workqueue: clean up delayed_work initializers and add missing one workqueue: make deferrable delayed_work initializer names consistent workqueue: cosmetic whitespace updates for macro definitions workqueue: deprecate system_nrt[_freezable]_wq workqueue: deprecate flush[_delayed]_work_sync() ...
2012-09-25sb_edac: Avoid overflow errors at memory size calculationMauro Carvalho Chehab
Sandy bridge EDAC is calculating the memory size with overflow. Basically, the size field and the integer calculation is using 32 bits. More bits are needed, when the DIMM memories have high density. The net result is that memories are improperly reported there, when high-density DIMMs are used: EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 As the number of pages value is handled at the EDAC core as unsigned ints, the driver shows the 16 GB memories at sysfs interface as 16760832 MB! The fix is simple: calculate the number of pages as unsigned 64-bits integer. After the patch, the memory size (16 GB) is properly detected: EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-25i5000: Fix the memory size calculation with 2R memoriesMauro Carvalho Chehab
When 2R memories are found, the memory size should be multiplied by two, otherwise, it will report half of the memory size: +-----------------------------------------------+ | mc0 | | branch0 | branch1 | | channel0 | channel1 | channel0 | channel1 | -------+-----------------------------------------------+ slot3: | 0 MB | 0 MB | 0 MB | 0 MB | slot2: | 0 MB | 0 MB | 0 MB | 0 MB | -------+-----------------------------------------------+ slot1: | 0 MB | 0 MB | 0 MB | 0 MB | slot0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB | -------+-----------------------------------------------+ (the above machine have 4 x 2GB 2R memories) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-25i3200_edac: Fix memory rank sizeMauro Carvalho Chehab
commit a895bf8b1e1ea4c032a8fa8a09475a2ce09fe77a incorrectly changed the logic that fills the memory bank size. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-23edac_mc: edac_mc_free() cannot assume mem_ctl_info is registered in sysfs.Shaun Ruffell
Fix potential NULL pointer dereference in edac_unregister_sysfs() on system boot introduced in 3.6-rc1. Since commit 7a623c039 ("edac: rewrite the sysfs code to use struct device") edac_mc_alloc() no longer initializes embedded kobjects in struct mem_ctl_info. Therefore edac_mc_free() can no longer simply decrement a kobject reference count to free the allocated memory unless the memory controller driver module had also called edac_mc_add_mc(). Now edac_mc_free() will check if the newly embedded struct device has been registered with sysfs before using either the standard device release functions or freeing the data structures itself with logic pulled out of the error path of edac_mc_alloc(). The BUG this patch resolves for me: BUG: unable to handle kernel NULL pointer dereference at (null) EIP is at __wake_up_common+0x1a/0x6a Process modprobe (pid: 933, ti=f3dc6000 task=f3db9520 task.ti=f3dc6000) Call Trace: complete_all+0x3f/0x50 device_pm_remove+0x23/0xa2 device_del+0x34/0x142 edac_unregister_sysfs+0x3b/0x5c [edac_core] edac_mc_free+0x29/0x2f [edac_core] e7xxx_probe1+0x268/0x311 [e7xxx_edac] e7xxx_init_one+0x56/0x61 [e7xxx_edac] local_pci_probe+0x13/0x15 ... Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-23edac_mc: fix messy kfree calls in the error pathFengguang Wu
coccinelle warns about: + drivers/edac/edac_mc.c:429:9-23: ERROR: reference preceded by free on line 429 421 if (mci->csrows) { > 422 for (chn = 0; chn < tot_channels; chn++) { 423 csr = mci->csrows[chn]; 424 if (csr) { > 425 for (chn = 0; chn < tot_channels; chn++) 426 kfree(csr->channels[chn]); 427 kfree(csr); 428 } > 429 kfree(mci->csrows[i]); 430 } 431 kfree(mci->csrows); 432 } and that code block seem to mess things up in several ways (double free, memory leak, out-of-bound reads etc.): L422: The iterator "chn" and bound "tot_channels" are totally wrong. Should be "row" and "tot_csrows" respectively. Which means either memory leak, or out-of-bound reads (which if does not trigger an immediate page fault error, will further lead to kfree() on random addresses). L425: The inner loop is reusing the same iterator "chn" as the outer loop, which could lead to premature end of the outer loop, and hence memory leak. L429: The array index 'i' in mci->csrows[i] is a temporary value used in previous loops, and won't change at all in the current loop. Which means either out-of-bound read and possibly kfree(random number), or the same mci->csrows[i] get freed once and again, and possibly double free for the kfree(csr) in L427. L426/L427: a kfree(csr->channels) is needed in between to avoid leaking the memory. The buggy code was introduced by commit de3910eb ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") in the 3.6-rc1 merge window. Fix it by freeing up resources in this order: free csrows[i]->channels[j] free csrows[i]->channels free csrows[i] free csrows CC: Mauro Carvalho Chehab <mchehab@redhat.com> CC: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-12powerpc/fsl-pci: Unify pci/pcie initialization codeJia Hongtao
We unified the Freescale pci/pcie initialization by changing the fsl_pci to a platform driver. In previous PCI code architecture the initialization routine is called at board_setup_arch stage. Now the initialization is done in probe function which is architectural better. Also It's convenient for adding PM support for PCI controller in later patch. Now we registered pci controllers as platform devices. So we combine two initialization code as one platform driver. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-13workqueue: use mod_delayed_work() instead of cancel + queueTejun Heo
Convert delayed_work users doing cancel_delayed_work() followed by queue_delayed_work() to mod_delayed_work(). Most conversions are straight-forward. Ones worth mentioning are, * drivers/edac/edac_mc.c: edac_mc_workq_setup() converted to always use mod_delayed_work() and cancel loop in edac_mc_reset_delay_period() is dropped. * drivers/platform/x86/thinkpad_acpi.c: No need to remember whether watchdog is active or not. @fan_watchdog_active and related code dropped. * drivers/power/charger-manager.c: Seemingly a lot of delayed_work_pending() abuse going on here. [delayed_]work_pending() are unsynchronized and racy when used like this. I converted one instance in fullbatt_handler(). Please conver the rest so that it invokes workqueue APIs for the intended target state rather than trying to game work item pending state transitions. e.g. if timer should be modified - call mod_delayed_work(), canceled - call cancel_delayed_work[_sync](). * drivers/thermal/thermal_sys.c: thermal_zone_device_set_polling() simplified. Note that round_jiffies() calls in this function are meaningless. round_jiffies() work on absolute jiffies not delta delay used by delayed_work. v2: Tomi pointed out that __cancel_delayed_work() users can't be safely converted to mod_delayed_work(). They could be calling it from irq context and if that happens while delayed_work_timer_fn() is running, it could deadlock. __cancel_delayed_work() users are dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Doug Thompson <dougthompson@xmission.com> Cc: David Airlie <airlied@linux.ie> Cc: Roland Dreier <roland@kernel.org> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Johannes Berg <johannes@sipsolutions.net>
2012-07-30Merge branch 'devel'Mauro Carvalho Chehab
* devel: (33 commits) edac i5000, i5400: fix pointer math in i5000_get_mc_regs() edac: allow specifying the error count with fake_inject edac: add support for Calxeda highbank L2 cache ecc edac: add support for Calxeda highbank memory controller edac: create top-level debugfs directory sb_edac: properly handle error count i7core_edac: properly handle error count edac: edac_mc_handle_error(): add an error_count parameter edac: remove arch-specific parameter for the error handler amd64_edac: Don't pass driver name as an error parameter edac_mc: check for allocation failure in edac_mc_alloc() edac: Increase version to 3.0.0 edac_mc: Cleanup per-dimm_info debug messages edac: Convert debugfX to edac_dbg(X, edac: Use more normal debugging macro style edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs Edac: Add ABI Documentation for the new device nodes edac: move documentation ABI to ABI/testing/sysfs-devices-edac i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy edac: change the mem allocation scheme to make Documentation/kobject.txt happy ...
2012-06-27edac i5000, i5400: fix pointer math in i5000_get_mc_regs()Dan Carpenter
"pvt->ambase" is a u64 datatype. The intent here is to fill the first half in the first call to pci_read_config_dword() and the other half in the second. Unfortunately the pointer math is wrong so we set the wrong data. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-27edac: allow specifying the error count with fake_injectMauro Carvalho Chehab
In order to test if the error counters are properly incremented, add a way to specify how many errors were generated by a trace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-27edac: add support for Calxeda highbank L2 cache eccRob Herring
Add support for L2 ECC on Calxeda highbank platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-27edac: add support for Calxeda highbank memory controllerRob Herring
Add support for memory controller on Calxeda Highbank platforms. Highbank platforms support a single 4GB mini-DIMM with 1-bit correction and 2-bit detection. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-12edac: create top-level debugfs directoryRob Herring
Create a single, top-level "edac" directory for debugfs. An "mc[0-N]" directory is then created for each memory controller. Individual drivers can create additional entries such as h/w error injection control. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-12sb_edac: properly handle error countMauro Carvalho Chehab
Instead of reporting the error count via driver-specific details, use the new way provided by edac_mc_handle_error. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-12i7core_edac: properly handle error countMauro Carvalho Chehab
Instead of generating a burst of errors or reporting the error count via driver-specific details, use the new way provided by edac_mc_handle_error. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-12edac: edac_mc_handle_error(): add an error_count parameterMauro Carvalho Chehab
In order to avoid loosing error events, it is desirable to group error events together and generate a single trace for several identical errors. The trace API already allows reporting multiple errors. Change the handle_error function to also allow that. The changes at the drivers were made by this small script: $file .=$_ while (<>); $file =~ s/(edac_mc_handle_error)\s*\(([^\,]+)\,([^\,]+)\,/$1($2,$3, 1,/g; print $file; Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: remove arch-specific parameter for the error handlerMauro Carvalho Chehab
Remove the arch-dependent parameter, as it were not used, as the MCE tracepoint weren't implemented. It probably doesn't make sense to have an MCE-specific tracepoint, as this will cost more bytes at the tracepoint, and tracepoint is not free. The changes at the EDAC drivers were done by this small perl script: $file .=$_ while (<>); $file =~ s/(edac_mc_handle_error)\s*\(([^\;]+)\,([^\,\)]+)\s*\)/$1($2)/g; print $file; Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11amd64_edac: Don't pass driver name as an error parameterMauro Carvalho Chehab
The EDAC driver name doesn't help to handle EDAC errors. So, remove it from the EDAC error messages, preserving only the error_message. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac_mc: check for allocation failure in edac_mc_alloc()Dan Carpenter
Add a check here for if kzalloc() failed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Increase version to 3.0.0Mauro Carvalho Chehab
There were lots of changes introduced to justify renaming it to 3.0.0: - EDAC core were redesigned to represent all types of memory controllers; - EDAC API were redesigned to properly represent the memory controller hierarchy; - a tracepoint-based API were added to report memory errors. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac_mc: Cleanup per-dimm_info debug messagesMauro Carvalho Chehab
The edac_mc_alloc() routine allocates one dimm_info device for all possible memories, including the non-filled ones. The debug messages there are somewhat confusing. So, cleans them, by moving the code that prints the memory location to edac_mc, and using it on both edac_mc_sysfs and edac_mc. Also, only dumps information when DIMM/ranks are actually filled. After this patch, a dimm-based memory controller will print the debug info as: [ 1011.380027] EDAC DEBUG: edac_mc_dump_csrow: csrow->csrow_idx = 0 [ 1011.380029] EDAC DEBUG: edac_mc_dump_csrow: csrow = ffff8801169be000 [ 1011.380031] EDAC DEBUG: edac_mc_dump_csrow: csrow->first_page = 0x0 [ 1011.380032] EDAC DEBUG: edac_mc_dump_csrow: csrow->last_page = 0x0 [ 1011.380034] EDAC DEBUG: edac_mc_dump_csrow: csrow->page_mask = 0x0 [ 1011.380035] EDAC DEBUG: edac_mc_dump_csrow: csrow->nr_channels = 3 [ 1011.380037] EDAC DEBUG: edac_mc_dump_csrow: csrow->channels = ffff8801149c2840 [ 1011.380039] EDAC DEBUG: edac_mc_dump_csrow: csrow->mci = ffff880117426000 [ 1011.380041] EDAC DEBUG: edac_mc_dump_channel: channel->chan_idx = 0 [ 1011.380042] EDAC DEBUG: edac_mc_dump_channel: channel = ffff8801149c2860 [ 1011.380044] EDAC DEBUG: edac_mc_dump_channel: channel->csrow = ffff8801169be000 [ 1011.380046] EDAC DEBUG: edac_mc_dump_channel: channel->dimm = ffff88010fe90400 ... [ 1011.380095] EDAC DEBUG: edac_mc_dump_dimm: dimm0: channel 0 slot 0 mapped as virtual row 0, chan 0 [ 1011.380097] EDAC DEBUG: edac_mc_dump_dimm: dimm = ffff88010fe90400 [ 1011.380099] EDAC DEBUG: edac_mc_dump_dimm: dimm->label = 'CPU#0Channel#0_DIMM#0' [ 1011.380101] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 [ 1011.380103] EDAC DEBUG: edac_mc_dump_dimm: dimm->grain = 8 [ 1011.380104] EDAC DEBUG: edac_mc_dump_dimm: dimm->nr_pages = 0x40000 ... (a rank-based memory controller would print, instead of "dimm?", "rank?" on the above debug info) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Convert debugfX to edac_dbg(X,Joe Perches
Use a more common debugging style. Remove __FILE__ uses, add missing newlines, coalesce formats and align arguments. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Use more normal debugging macro styleJoe Perches
Convert macros to a simpler style and enforce appropriate format checking when not CONFIG_EDAC_DEBUG. Use fmt and __VA_ARGS__, neaten macros. Move some string arrays to the debugfx uses and remove the now unnecessary CONFIG_EDAC_DEBUG variable block definitions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Don't add __func__ or __FILE__ for debugf[0-9] msgsMauro Carvalho Chehab
The debug macro already adds that. Most of the work here was made by this small script: $f .=$_ while (<>); $f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*": /\1"/g; $f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*/\1/g; $f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*"MC: /\1"/g; $f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g; $f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g; $f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g; $f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g; $f =~ s/\"MC\: \\n\"/"MC:\\n"/g; print $f; After running the script, manual cleanups were done to fix it the remaining places. While here, removed the __LINE__ on most places, as it doesn't actually give useful info on most places. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11i7core_edac: change the mem allocation scheme to make ↵Mauro Carvalho Chehab
Documentation/kobject.txt happy Kernel kobjects have rigid rules: each container object should be dynamically allocated, and can't be allocated into a single kmalloc. EDAC never obeyed this rule: it has a single malloc function that allocates all needed data into a single kzalloc. As this is not accepted anymore, change the allocation schema of the EDAC *_info structs to enforce this Kernel standard. Cc: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: change the mem allocation scheme to make Documentation/kobject.txt happyMauro Carvalho Chehab
Kernel kobjects have rigid rules: each container object should be dynamically allocated, and can't be allocated into a single kmalloc. EDAC never obeyed this rule: it has a single malloc function that allocates all needed data into a single kzalloc. As this is not accepted anymore, change the allocation schema of the EDAC *_info structs to enforce this Kernel standard. Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Only expose csrows/channels on legacy API if they're populatedMauro Carvalho Chehab
This patch actually fixes a bug with the legacy API, where, at the same csrow, some channels may have different DIMMs. This can happen on FB-DIMM/RAMBUS and modern Intel controllers. This is the case, for example, of Nehalem machines: $ ./edac-ctl --layout +-----------------------------------+ | mc0 | | channel0 | channel1 | channel2 | -------+-----------------------------------+ slot2: | 0 MB | 0 MB | 0 MB | slot1: | 1024 MB | 0 MB | 0 MB | slot0: | 1024 MB | 1024 MB | 1024 MB | -------+-----------------------------------+ Before this patch, non-filled memories were shown. Now, only what's filled is there: grep . /sys/devices/system/edac/mc/mc0/csrow*/ch?* /sys/devices/system/edac/mc/mc0/csrow0/ch0_ce_count:0 /sys/devices/system/edac/mc/mc0/csrow0/ch0_dimm_label:CPU#0Channel#0_DIMM#0 /sys/devices/system/edac/mc/mc0/csrow0/ch1_ce_count:0 /sys/devices/system/edac/mc/mc0/csrow0/ch1_dimm_label:CPU#0Channel#0_DIMM#1 /sys/devices/system/edac/mc/mc0/csrow1/ch0_ce_count:0 /sys/devices/system/edac/mc/mc0/csrow1/ch0_dimm_label:CPU#0Channel#1_DIMM#0 /sys/devices/system/edac/mc/mc0/csrow2/ch0_ce_count:0 /sys/devices/system/edac/mc/mc0/csrow2/ch0_dimm_label:CPU#0Channel#2_DIMM#0 Thanks-to: Aristeu Rozanski Filho <arozansk@redhat.com> Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Move grain/dtype/edac_type calculus to be out of channel loopMauro Carvalho Chehab
The 3e7bddc changeset (edac: move dimm properties to struct memset_info) moved the calculus inside a loop. However, at those stuff are common to all channels, on several drivers, it is better to put the calculus outside the loop, to optimize the code. Reported-by: Aristeu Rozanski Filho <arozansk@redhat.com> Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Add debufs nodes to allow doing fake error injectMauro Carvalho Chehab
Sometimes, it is useful to have a mechanism that generates fake errors, in order to test the EDAC core code, and the userspace tools. Provide such mechanism by adding a few debugfs nodes. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: add a sysfs node to report the maximum location for the systemMauro Carvalho Chehab
The userspace tools need to know what's the maximum location on each system, as it helps to create nice maps showing how the memory was filled at the system. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: add a new per-dimm API and make the old per-virtual-rank API obsoleteMauro Carvalho Chehab
The old EDAC API is broken. It only works fine for systems manufatured before 2005 and for AMD 64. The reason is that it forces all memory controller drivers to discover rank info. Also, it doesn't allow grouping the several ranks into a DIMM. So, what almost all modern drivers do is to create a fake virtual-rank information, and use it to cheat the EDAC core to accept the driver. While this works if the user has enough time to discover what DIMM slot corresponds to each "virtual-rank" information, it prevents EDAC usage for users with less available time. It also makes life hard for vendors that may want to provide a table with their motherboards to the userspace tool (edac-utils) as each driver has its own logic for the virtual mapping. So, the old API should be removed, in favor of a more flexible API that allows newer drivers to not lie to the EDAC core. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Get rid of the old kobj's from the edac mc codeMauro Carvalho Chehab
Now that al users for the old kobj raw access are gone, we can get rid of the legacy kobj-based structures and data. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11i7core_edac: convert it to use struct deviceMauro Carvalho Chehab
Instead of relying on a complex logic inside the edac core to create a "device tree-like" sysfs struct, just use device_add. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11amd64_edac: convert sysfs logic to use struct deviceMauro Carvalho Chehab
Now that the EDAC core supports struct device, there's no sense on having any logic at the EDAC core to simulate it. So, instead of adding such logic there, change the logic at amd64_edac to use it. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11mpc85xx_edac: convert sysfs logic to use struct deviceMauro Carvalho Chehab
Now that the EDAC core supports struct device, there's no sense on having any logic at the EDAC core to simulate it. So, instead of adding such logic there, change the logic at mpc85xx_edac to use it compile-tested only. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: rewrite the sysfs code to use struct deviceMauro Carvalho Chehab
The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Do alignment logic properly in edac_align_ptr()Chris Metcalf
The logic was checking the sizeof the structure being allocated to determine whether an alignment fixup was required. This isn't right; what we actually care about is the alignment of the actual pointer that's about to be returned. This became an issue recently because struct edac_mc_layer has a size that is not zero modulo eight, so we were taking the correctly-aligned pointer and forcing it to be misaligned. On Tile this caused an alignment exception. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: Rename the parent dev to pdevMauro Carvalho Chehab
As EDAC doesn't use struct device itself, it created a parent dev pointer called as "pdev". Now that we'll be converting it to use struct device, instead of struct devsys, this needs to be fixed. No functional changes. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11RAS: Add a tracepoint for reporting memory controller eventsMauro Carvalho Chehab
Add a new tracepoint-based hardware events report method for reporting Memory Controller events. Part of the description bellow is shamelessly copied from Tony Luck's notes about the Hardware Error BoF during LPC 2010 [1]. Tony, thanks for your notes and discussions to generate the h/w error reporting requirements. [1] http://lwn.net/Articles/416669/ We have several subsystems & methods for reporting hardware errors: 1) EDAC ("Error Detection and Correction"). In its original form this consisted of a platform specific driver that read topology information and error counts from chipset registers and reported the results via a sysfs interface. 2) mcelog - x86 specific decoding of machine check bank registers reporting in binary form via /dev/mcelog. Recent additions make use of the APEI extensions that were documented in version 4.0a of the ACPI specification to acquire more information about errors without having to rely reading chipset registers directly. A user level programs decodes into somewhat human readable format. 3) drivers/edac/mce_amd.c - this driver hooks into the mcelog path and decodes errors reported via machine check bank registers in AMD processors to the console log using printk(); Each of these mechanisms has a band of followers ... and none of them appear to meet all the needs of all users. As part of a RAS subsystem, let's encapsulate the memory error hardware events into a trace facility. The tracepoint printk will be displayed like: mc_event: [quant] (Corrected|Uncorrected|Fatal) error:[error msg] on [label] ([location] [edac_mc detail] [driver_detail] Where: [quant] is the quantity of errors [error msg] is the driver-specific error message (e. g. "memory read", "bus error", ...); [location] is the location in terms of memory controller and branch/channel/slot, channel/slot or csrow/channel; [label] is the memory stick label; [edac_mc detail] describes the address location of the error and the syndrome; [driver detail] is driver-specifig error message details, when needed/provided (e. g. "area:DMA", ...) For example: mc_event: 1 Corrected error:memory read on memory stick DIMM_1A (mc:0 location:0:0:0 page:0x586b6e offset:0xa66 grain:32 syndrome:0x0 area:DMA) Of course, any userspace tools meant to handle errors should not parse the above data. They should, instead, use the binary fields provided by the tracepoint, mapping them directly into their Management Information Base. NOTE: The original patch was providing an additional mechanism for MCA-based trace events that also contained MCA error register data. However, as no agreement was reached so far for the MCA-based trace events, for now, let's add events only for memory errors. A latter patch is planned to change the tracepoint, for those types of event. Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11mpc85xx_edac: fix error: too few arguments to function 'edac_mc_alloc'Kim Phillips
commit ca0907b "edac: Remove the legacy EDAC ABI" broke mpc85xx_edac in the following manner: mpc85xx_edac.c:983:35: error: too few arguments to function 'edac_mc_alloc' this patch puts back the missing 'layers' argument. [mchehab@redhat.com: As Ben sent a similar fix, I added his SOB on this patch] Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: fix the error about memory type detection on SandyBridgeChen Gong
On SandyBridge, DDRIOA(Dev: 17 Func: 0 Offset: 328) is used to detect whether DIMM is RDIMM/LRDIMM, not TA(Dev: 15 Func: 0). Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11edac: avoid mce decoding crash after edac driver unloadedChen Gong
Some edac drivers register themselves as mce decoders via notifier_chain. But in current notifier_chain implementation logic, it doesn't accept same notifier registered twice. If so, it will be wrong when adding/removing the element from the list. For example, on one SandyBridge platform, remove module sb_edac and then trigger one error, it will hit oops because it has no mce decoder registered but related notifier_chain still points to an invalid callback function. Here is an example: Call Trace: [<ffffffff8150ef6a>] atomic_notifier_call_chain+0x1a/0x20 [<ffffffff8102b936>] mce_log+0x46/0x180 [<ffffffff8102eaea>] apei_mce_report_mem_error+0x4a/0x60 [<ffffffff812e19d2>] ghes_do_proc+0x192/0x210 [<ffffffff812e2066>] ghes_proc+0x46/0x70 [<ffffffff812e20d8>] ghes_notify_sci+0x48/0x80 [<ffffffff8150ef05>] notifier_call_chain+0x55/0x80 [<ffffffff81076f1a>] __blocking_notifier_call_chain+0x5a/0x80 [<ffffffff812aea11>] ? acpi_os_wait_events_complete+0x23/0x23 [<ffffffff81076f56>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff812ddc4d>] acpi_hed_notify+0x19/0x1b [<ffffffff812b16bd>] acpi_device_notify+0x19/0x1b [<ffffffff812beb38>] acpi_ev_notify_dispatch+0x67/0x7f [<ffffffff812aea3a>] acpi_os_execute_deferred+0x29/0x36 [<ffffffff81069dc2>] process_one_work+0x132/0x450 [<ffffffff8106bbcb>] worker_thread+0x17b/0x3c0 [<ffffffff8106ba50>] ? manage_workers+0x120/0x120 [<ffffffff81070aee>] kthread+0x9e/0xb0 [<ffffffff81514724>] kernel_thread_helper+0x4/0x10 [<ffffffff81070a50>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff81514720>] ? gs_change+0x13/0x13 Code: f3 49 89 d4 45 85 ed 4d 89 c6 48 8b 0f 74 48 48 85 c9 75 17 eb 41 0f 1f 80 00 00 00 00 41 83 ed 01 4c 89 f9 74 22 4d 85 ff 74 1d <4c> 8b 79 08 4c 89 e2 48 89 de 48 89 cf ff 11 4d 85 f6 74 04 41 RIP [<ffffffff8150eef6>] notifier_call_chain+0x46/0x80 RSP <ffff88042868fb20> CR2: ffffffffa01af838 ---[ end trace 0100930068e73e6f ]--- BUG: unable to handle kernel paging request at fffffffffffffff8 IP: [<ffffffff810705b0>] kthread_data+0x10/0x20 PGD 1a0d067 PUD 1a0e067 PMD 0 Oops: 0000 [#2] SMP Only i7core_edac and sb_edac have such issues because they have more than one memory controller which means they have to register mce decoder many times. Cc: <stable@vger.kernel.org> # 3.2 and upper Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-30Merge branch 'x86/trampoline' into x86/urgentH. Peter Anvin
x86/trampoline contains an urgent commit which is necessarily on a newer baseline. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-05-30Merge branch 'x86/mce' into x86/urgentIngo Molnar
Merge in these fixlets. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edacLinus Torvalds
Pull EDAC internal API changes from Mauro Carvalho Chehab: "This changeset is the first part of a series of patches that fixes the EDAC sybsystem. On this set, it changes the Kernel EDAC API in order to properly represent the Intel i3/i5/i7, Xeon 3xxx/5xxx/7xxx, and Intel E5-xxxx memory controllers. The EDAC core used to assume that: - the DRAM chip select pin is directly accessed by the memory controller - when multiple channels are used, they're all filled with the same type of memory. None of the above premises is true on Intel memory controllers since 2002, when RAMBUS and FB-DIMMs were introduced, and Advanced Memory Buffer or by some similar technologies hides the direct access to the DRAM pins. So, the existing drivers for those chipsets had to lie to the EDAC core, in general telling that just one channel is filled. That produces some hard to understand error messages like: EDAC MC0: CE row 3, channel 0, label "DIMM1": 1 Unknown error(s): memory read error on FATAL area : cpu=0 Err=0008:00c2 (ch=2), addr = 0xad1f73480 => socket=0, Channel=0(mask=2), rank=1 The location information there (row3 channel 0) is completely bogus: it has no physical meaning, and are just some random values that the driver uses to talk with the EDAC core. The error actually happened at CPU socket 0, channel 0, slot 1, but this is not reported anywhere, as the EDAC core doesn't know anything about the memory layout. So, only advanced users that know how the EDAC driver works and that tests their systems to see how DIMMs are mapped can actually benefit for such error logs. This patch series fixes the error report logic, in order to allow the EDAC to expose the memory architecture used by them to the EDAC core. So, as the EDAC core now understands how the memory is organized, it can provide an useful report: EDAC MC0: CE memory read error on DIMM1 (channel:0 slot:1 page:0x364b1b offset:0x600 grain:32 syndrome:0x0 - count:1 area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:4) The location of the DIMM where the error happened is reported by "MC0" (cpu socket #0), at "channel:0 slot:1" location, and matches the physical location of the DIMM. There are two remaining issues not covered by this patch series: - The EDAC sysfs API will still report bogus values. So, userspace tools like edac-utils will still use the bogus data; - Add a new tracepoint-based way to get the binary information about the errors. Those are on a second series of patches (also at -next), but will probably miss the train for 3.5, due to the slow review process." Fix up trivial conflict (due to spelling correction of removed code) in drivers/edac/edac_device.c * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (42 commits) i7core: fix ranks information at the per-channel struct i5000: Fix the fatal error handling i5100_edac: Fix a warning when compiled with 32 bits i82975x_edac: Test nr_pages earlier to save a few CPU cycles e752x_edac: provide more info about how DIMMS/ranks are mapped i5000_edac: Fix the logic that retrieves memory information i5400_edac: improve debug messages to better represent the filled memory edac: Cleanup the logs for i7core and sb edac drivers edac: Initialize the dimm label with the known information edac: Remove the legacy EDAC ABI x38_edac: convert driver to use the new edac ABI tile_edac: convert driver to use the new edac ABI sb_edac: convert driver to use the new edac ABI r82600_edac: convert driver to use the new edac ABI ppc4xx_edac: convert driver to use the new edac ABI pasemi_edac: convert driver to use the new edac ABI mv64x60_edac: convert driver to use the new edac ABI mpc85xx_edac: convert driver to use the new edac ABI i82975x_edac: convert driver to use the new edac ABI i82875p_edac: convert driver to use the new edac ABI ...
2012-05-28i7core: fix ranks information at the per-channel structMauro Carvalho Chehab
There is a flag at the per-channel struct that indicates if there are any 4R dimm on it. The way the presence of this flag were reported is not ok, as it might give the false idea that the channel were filled with 2R memories: [ 580.588701] EDAC DEBUG: get_dimm_config: Ch1 phy rd1, wr1 (0x063f7431): 2 ranks, UDIMMs [ 580.588704] EDAC DEBUG: get_dimm_config: dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400 (in this case, just one 1R memory is filled on channel 1) So, use a better way to represent the per-channel ranks information. After the patch, it will show: [ 2002.233978] EDAC DEBUG: get_dimm_config: Ch0 phy rd0, wr0 (0x063f7431): UDIMMs [ 2002.233982] EDAC DEBUG: get_dimm_config: dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400 [ 2002.233988] EDAC DEBUG: get_dimm_config: dimm 1 1024 Mb offset: 4, bank: 8, rank: 1, row: 0x4000, col: 0x400 (in this case, there isn't any 4R memories) Reported-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28i5000: Fix the fatal error handlingMauro Carvalho Chehab
The fatal error channel bits point to a single channel, and not to a range of channels. Fix the code to properly report it, instead of printing messages like: kernel: EDAC MC0: INTERNAL ERROR: channel-b out of range (4 >= 4) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>