summaryrefslogtreecommitdiff
path: root/drivers/firewire/sbp2.c
AgeCommit message (Collapse)Author
2010-11-16SCSI host lock push-downJeff Garzik
Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-19firewire: sbp2: fix stall with "Unsolicited response"Stefan Richter
Fix I/O stalls with some 4-bay RAID enclosures which are based on OXUF936QSE: - Onnto dataTale RSM4QO, old firmware (not anymore with current firmware), - inXtron Hydra Super-S LCM, old as well as current firmware when used in RAID-5 mode, perhaps also in other RAID modes. The stalls happen during heavy or moderate disk traffic in periods that are a multiple of 5 minutes, roughly twice per hour. They are caused by the target responding too late to an ORB_Pointer register write: The target responds after Split_Timeout, hence firewire-core cancels the transaction, and firewire-sbp2 fails the SCSI request. The SCSI core retries the request, that fails again (and again), hence SCSI core calls firewire-sbp2's abort handler (and even the Management_Agent register write in the abort handler has the transaction timeout problem). During all that, the process which issued the I/O is stalled in I/O wait state. Meanwhile, the target actually acts on the first failed SCSI request: It responds to the ORB_Pointer write later (seen in the kernel log as "firewire_core: Unsolicited response") and also finishes the SCSI request with proper status (seen in the kernel log as "firewire_sbp2: status write for unknown orb"). So let's just ignore RCODE_CANCELLED in the transaction callback and wait for the target to complete the ORB nevertheless. This requires a small modification is sbp2_cancel_orbs(); it now needs to call orb->callback() regardless whether fw_cancel_transaction() found the transaction unfinished or finished. A different solution is to increase Split_Timeout on the local node. (Tested: 2000ms timeout; maybe 1000ms or something like that works too. 200ms is insufficient. Standard is 100ms.) However, I rather not do this because any software on any node could change the Split_Timeout to something unsuitable. Or such a large Split_Timeout may be undesirable for other purposes. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-08-19firewire: sbp2: fix memory leak in sbp2_cancel_orbs or at send errorStefan Richter
When an ORB was canceled (Command ORB i.e. SCSI request timed out, or Management ORB timed out), or there was a send error in the initial transaction, we missed to drop one of the ORB's references and thus leaked memory. Background: In total, we hold 3 references to each Operation Request Block: - 1 during sbp2_scsi_queuecommand() or sbp2_send_management_orb() respectively, - 1 for the duration of the write transaction to the ORB_Pointer or Management_Agent register of the target, - 1 for as long as the ORB stays within the lu->orb_list, until the ORB is unlinked from the list and the orb->callback was executed. The latter one of these 3 references is finished - normally by sbp2_status_write() when the target wrote status for a pending ORB, - or by sbp2_cancel_orbs() in case of an ORB time-out, - or by complete_transaction() in case of a send error. Of them, the latter two lacked the kref_put. Add the missing kref_put()s. Add comments to the gets and puts of references for transaction callbacks and ORB callbacks so that it is easier to see what is supposed to happen. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-08-02Merge firewire branches to be released post v2.6.35Stefan Richter
Conflicts: drivers/firewire/core-card.c drivers/firewire/core-cdev.c and forgotten #include <linux/time.h> in drivers/firewire/ohci.c Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-20firewire: remove an unused function argumentStefan Richter
void (*fw_address_callback_t)(..., int speed, ...) is the speed that a remote node chose to transmit a request to us. In case of split transactions, firewire-core will transmit the response at that speed. Upper layer drivers on the other hand (firewire-net, -sbp2, firedtv, and userspace drivers) cannot do anything useful with that speed datum, except log it for debug purposes. But data that is merely potentially (not even actually) used for debug purposes does not belong into the API. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-19firewire: drop sizeof expressions from some request size argumentsStefan Richter
In case of fw_card_bm_work()'s lock request, the present sizeof expression is going to be wrong if somebody changes the fw_card's DMA scratch buffer's size in the future. In case of quadlet write requests, sizeof(u32) is just silly; it's 4. In case of SBP-2 ORB pointer write requests, 8 is arguably quicker to understand as the correct and only possible value than sizeof(some_datum). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-03-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (23 commits) firewire: ohci: extend initialization log message firewire: ohci: fix IR/IT context mask mixup firewire: ohci: add module parameter to activate quirk fixes firewire: ohci: use an ID table for quirks detection firewire: ohci: reorder struct fw_ohci for better cache efficiency firewire: ohci: remove unused dualbuffer IR code firewire: core: combine a bit of repeated code firewire: core: change type of a data buffer firewire: cdev: increment ABI version number firewire: cdev: add more flexible cycle timer ioctl firewire: core: rename an internal function firewire: core: fix an information leak firewire: core: increase stack size of config ROM reader firewire: core: don't fail device creation in case of too large config ROM blocks firewire: core: fix "giving up on config rom" with Panasonic AG-DV2500 firewire: remove incomplete Bus_Time CSR support firewire: get_cycle_timer optimization and cleanup firewire: ohci: enable cycle timer fix on ALi and NEC controllers firewire: ohci: work around cycle timer bugs on VIA controllers firewire: make PCI device id constant ...
2010-02-26block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectorsMartin K. Petersen
The block layer calling convention is blk_queue_<limit name>. blk_queue_max_sectors predates this practice, leading to some confusion. Rename the function to appropriately reflect that its intended use is to set max_hw_sectors. Also introduce a temporary wrapper for backwards compability. This can be removed after the merge window is closed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-29firewire: qualify config ROM cache pointers as const pointersStefan Richter
Several config ROM related functions only peek at the ROM cache; mark their arguments as const pointers. Ditto fw_device.config_rom and fw_unit.directory, as the memory behind them is meant to be write-once. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14firewire: normalize style of queue_work wrappersStefan Richter
A few stylistic changes to unify some code patterns in the subsystem: - The similar queue_delayed_work helpers fw_schedule_bm_work, schedule_iso_resource, and sbp2_queue_work now have the same call convention. - Two conditional calls of schedule_iso_resource are factored into another small helper. - An sbp2_target_get helper is added as counterpart to sbp2_target_put. Object size of firewire-core is decreased a little bit, object size of firewire-sbp2 remains unchanged. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14firewire: sbp2: provide fallback if mgt_ORB_timeout is missingStefan Richter
The Unit_Characteristics entry of an SBP-2 unit directory is not mandatory as far as I can tell. If it is missing, we would probably fail to log in into the target because firewire-sbp2 would not wait for status after it sent the login request. The fix moves the cleanup of tgt->mgt_orb_timeout into a place where it is executed exactly once before login, rather than 0..n times depending on the target's config ROM. With targets with one or more Unit_Characteristics entries, the result is the same as before. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12firewire: sbp2: remove a workaround for Momobay FX-3AStefan Richter
The inquiry delay does more harm than good in tests on a recent kernel. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12firewire: sbp2: fix status receptionStefan Richter
Per SBP-2 clause 5.3, a target shall store 8...32 bytes of status information. Trailing zeros after the first 8 bytes don't need to be stored, they are implicit. Fix the status write handler to clear all unwritten status data. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: fix freeing of unallocated memory firewire: ohci: fix Ricoh R5C832, video reception firewire: ohci: fix Agere FW643 and multiple cameras firewire: core: fix crash in iso resource management
2009-09-05firewire: sbp2: fix freeing of unallocated memoryStefan Richter
If a target writes invalid status (typically status of a command that already timed out), firewire-sbp2 attempts to put away an ORB that doesn't exist. https://bugzilla.redhat.com/show_bug.cgi?id=519772 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-07-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: sbp2: add support for disks >2 TB (and 16 bytes long CDBs) firewire: sbp2: add support for disks >2 TB (and 16 bytes long CDBs) firewire: core: do not DMA-map stack addresses
2009-07-02firewire: sbp2: add support for disks >2 TB (and 16 bytes long CDBs)Stefan Richter
Increase the command ORB data structure to transport up to 16 bytes long CDBs (instead of 12 bytes), and tell the SCSI mid layer about it. This is notably necessary for READ CAPACITY(16) and friends, i.e. support of large disks. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: use more outbound tlabels firewire: core: don't update Broadcast_Channel if RFC 2734 conditions aren't met firewire: core: prepare for non-core children of card devices firewire: core: include linux/uaccess.h instead of asm/uaccess.h firewire: add parent-of-unit accessor firewire: rename source files firewire: reorganize header files firewire: clean up includes firewire: ohci: access bus_seconds atomically firewire: also use vendor ID in root directory for driver matches firewire: share device ID table type with ieee1394 firewire: core: add sysfs attribute for easier udev rules firewire: core: check for missing struct update at build time, not run time firewire: core: improve check for local node
2009-06-06firewire: add parent-of-unit accessorStefan Richter
Retrieval of an fw_unit's parent is a common pattern in high-level code. Wrap it up as device = fw_parent_device(unit). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-05firewire: rename source filesStefan Richter
The source files of firewire-core, firewire-ohci, firewire-sbp2, i.e. "drivers/firewire/fw-*.c" are renamed to "drivers/firewire/core-*.c", "drivers/firewire/ohci.c", "drivers/firewire/sbp2.c". The old fw- prefix was redundant to the directory name. The new core- prefix distinguishes the files according to which driver they belong to. This change comes a little late, but still before further firewire drivers are added as anticipated RSN. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>