summaryrefslogtreecommitdiff
path: root/drivers/firewire
AgeCommit message (Collapse)Author
2010-03-08Driver core: create lock/unlock functions for struct deviceGreg Kroah-Hartman
In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (23 commits) firewire: ohci: extend initialization log message firewire: ohci: fix IR/IT context mask mixup firewire: ohci: add module parameter to activate quirk fixes firewire: ohci: use an ID table for quirks detection firewire: ohci: reorder struct fw_ohci for better cache efficiency firewire: ohci: remove unused dualbuffer IR code firewire: core: combine a bit of repeated code firewire: core: change type of a data buffer firewire: cdev: increment ABI version number firewire: cdev: add more flexible cycle timer ioctl firewire: core: rename an internal function firewire: core: fix an information leak firewire: core: increase stack size of config ROM reader firewire: core: don't fail device creation in case of too large config ROM blocks firewire: core: fix "giving up on config rom" with Panasonic AG-DV2500 firewire: remove incomplete Bus_Time CSR support firewire: get_cycle_timer optimization and cleanup firewire: ohci: enable cycle timer fix on ALi and NEC controllers firewire: ohci: work around cycle timer bugs on VIA controllers firewire: make PCI device id constant ...
2010-02-26block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectorsMartin K. Petersen
The block layer calling convention is blk_queue_<limit name>. blk_queue_max_sectors predates this practice, leading to some confusion. Rename the function to appropriately reflect that its intended use is to set max_hw_sectors. Also introduce a temporary wrapper for backwards compability. This can be removed after the merge window is closed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-24firewire: ohci: extend initialization log messageStefan Richter
by the number of available isochronous DMA contexts and active quirks which is occasionally useful information. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: ohci: fix IR/IT context mask mixupStefan Richter
This bug was present in firewire-ohci since day one: The number of available isochronous receive DMA contexts was mixed up with that of available isochronous transmit DMA contexts. This is harmless on a few chips which offer the same number of contexts in both directions, but most chips nowadays implement only the standard minimum of 4 IR contexts, but 8 IT contexts. If a user attempted to run a lot of IR contexts at once, results with more than four were therefore unpredictable. I suppose the controller would simply refuse to start DMA of any unimplemented context. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: ohci: add module parameter to activate quirk fixesStefan Richter
This way, we can advise users of precompiled kernel packages to test existing quirk fixes on chips which have not been listed yet, without them having to build a kernel from source. Note, to use this feature on a machine with more than one controller, steps like these are necessary: # lspci | grep 1394 # ls /sys/bus/pci/drivers/firewire_ohci/ # echo -n "0000:03:02.0" > /sys/bus/pci/drivers/firewire_ohci/unbind # echo 2 > /sys/module/firewire_ohci/parameters/quirks # echo -n "0000:03:02.0" > /sys/bus/pci/drivers/firewire_ohci/bind # echo 0 > /sys/module/firewire_ohci/parameters/quirks The parameter can also be used to switch off quirk flags that were hardwired into firewire-ohci's quirks table. Simply specify a non-zero quirks value but without any known flags, e.g. 0x100. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: ohci: use an ID table for quirks detectionStefan Richter
We don't have a lot of quirks to take into account (especially since dual-buffer IR is out of the picture), but still, a table-based approach is more organized than a series of if () clauses. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: ohci: reorder struct fw_ohci for better cache efficiencyStefan Richter
The config_rom struct members are only accessed during relatively infrequent self-ID-complete interrupts and only if the local config ROM was changed, while the ar_, at_, ir_, it_ members are used very frequently during I/O. Hence move the config_rom members further down. More importantly, make the huge self_id_buffer member the last one; this is only accessed in self-ID-complete interrupts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: ohci: remove unused dualbuffer IR codeStefan Richter
This code was no longer used since 2.6.33, "firewire: ohci: always use packet-per-buffer mode for isochronous reception" commit 090699c0. If anybody needs this code in the future for special purposes, it can be brought back in. But it must not be re-enabled by default; drivers (kernelspace or userspace drivers) should only get this mode if they explicitly request it. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: combine a bit of repeated codeStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: change type of a data bufferStefan Richter
from array of char to union of structs. I already used a union to size the buffer which holds ioctl arguments; more consequent is to define it as an instance of this union in the first place. Also rename several local variables from "request" to "a"(rgument) since the term request can be mistaken to mean a transaction subaction, e.g. an instance of struct fw_request. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: cdev: add more flexible cycle timer ioctlStefan Richter
The system time from CLOCK_REALTIME is not monotonic, hence problematic for the main user of the FW_CDEV_IOC_GET_CYCLE_TIMER ioctl. This issue exists in its successor ABI, i.e. raw1394, too. http://subversion.ffado.org/ticket/242 We now offer an alternative ioctl which lets the caller choose between CLOCK_REALTIME, CLOCK_MONOTONIC, and CLOCK_MONOTONIC_RAW as source of the local time, very similar to the clock_gettime libc function. The format of the local time return value matches that of clock_gettime (seconds and nanoseconds, instead of a single microseconds value from the existing ioctl). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: rename an internal functionStefan Richter
according to what it really does. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: fix an information leakStefan Richter
If a device exposes a sparsely populated configuration ROM, firewire-core's sysfs interface and character device file interface showed random data in the gaps between config ROM blocks. Fix this by zero-initialization of the config ROM reader's scratch buffer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: increase stack size of config ROM readerStefan Richter
The stack size of 16 was artificially chosen and may be too small in extreme cases. A device won't be accessible then. Since it doesn't really matter to the slab allocator whether we ask for 1088 bytes or 2048 bytes of scratch memory, just allocate 2048 bytes for the sum of temporary config ROM image and stack, and we will never ever overflow the stack (because there simply can't be more stack items than ROM entries). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: don't fail device creation in case of too large config ROM ↵Stefan Richter
blocks It never happened yet, but better safe than sorry: If a device's config ROM contains a block which overlaps the boundary at 0xfffff00007ff, just ignore that one block instead of refusing to add the device representation. That way, upper layers (kernelspace or userspace drivers) might still be able to use the device to some degree. That's better than total inaccessibility of the device. Worse, the core would have logged only a generic "giving up on config rom" message which could only be debugged by feeding a firewire-ohci debug logging session through a config ROM interpreter, IOW would likely remain undiagnosed. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: fix "giving up on config rom" with Panasonic AG-DV2500Stefan Richter
The Panasonic AG-DV2500 tape deck contains an invalid entry in its configuration ROM root directory: A leaf pointer with the undefined key ID 0 and an offset that points way out of the standard config ROM area. This caused firewire-core to dismiss the device with the generic log message "giving up on config rom for node id...", after which it was of course impossible to access the tape deck with dvgrab or any other program. https://bugzilla.redhat.com/show_bug.cgi?id=449252#c29 The fix is to simply ignore this invalid ROM entry and proceed to read the valid rest of the ROM. There is a catch though: When the kernel later iterates over the ROM, it would be nasty having to check again for such too large ROM offsets. Therefore we manipulate the defective or unsupported ROM entry to become a harmless immediate entry that won't have any side effects later (an entry with the value 0x00000000). Reported-by: George Chriss Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24Merge tag 'v2.6.33' for its firewire changes since last branch pointStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-20firewire: remove incomplete Bus_Time CSR supportStefan Richter
The current implementation of Bus_Time read access was buggy since it did not ensure that Bus_Time.second_count_hi and second_count_lo came from the same 128 seconds period. Reported-by: Håkan Johansson <f96hajo@chalmers.se> Instead of a fix, remove Bus_Time register support altogether. The spec requires all cycle master capable nodes to implement this (all Linux nodes are cycle master capable) while it also says that it "may" be initialized by the bus manager or by the IRM standing in for a bus manager. (Neither Linux' firewire-core nor ieee1394 nodemgr implement this.) Since we cannot rely on Bus_Time having been initialized by a bus manager, it is better to return an error instead of a nonsensical value on a read request to Bus_Time. Alternatively, we could fix the Bus_Time read integrity bug _and_ implement (a) cycle master's write support of the register as well as (b) bus manager's Bus_Time initialization service, i.e. preservation of the Bus_Time when the cycle master node of a bus changes. However, that would be quite some code for a feature that is unreliable to begin with and very likely unused in practice. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-20firewire: get_cycle_timer optimization and cleanupStefan Richter
ohci: Break out of the retry loop if too many attempts were necessary. This may theoretically happen if the chip is fatally defective or if the get_cycle_timer ioctl was performed after a CardBus controller was ejected. Also micro-optimize the loop by re-using the last two register reads in the next iteration, remove a questionable inline keyword, and shuffle a comment around. core: ioctl_get_cycle_timer() is always called with interrupts on, therefore local_irq_save() can be replaced by local_irq_disable(). Disabled local IRQs imply disabled preemption, hence preempt_disable() can be removed. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-19firewire: ohci: enable cycle timer fix on ALi and NEC controllersStefan Richter
Discussed in "read_cycle_timer backwards for sub-cycle 0000, 0001", http://thread.gmane.org/gmane.linux.kernel.firewire.devel/13704 Known bad controllers: ALi M5271, listed by lspci as M5253 [10b9:5253] NEC OrangeLink [1033:00cd] (rev 03) NEC uPD72874 [1033:00f2] (rev 01) VIA VT6306 [1106:3044] (rev 46) VIA VT6308P, listed by lspci as rev c0 Reported-by: Pieter Palmers <pieterp@joow.be> Reported-by: Håkan Johansson <f96hajo@chalmers.se> Reported-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-19firewire: ohci: work around cycle timer bugs on VIA controllersClemens Ladisch
VIA controllers sometimes return an inconsistent value when reading the isochronous cycle timer register. To work around this, read the register multiple times and add consistency checks. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-by: Pieter Palmers <pieterp@joow.be> Reported-by: Håkan Johansson <f96hajo@chalmers.se> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-14firewire: ohci: retransmit isochronous transmit packets on cycle lossClemens Ladisch
In isochronous transmit DMA descriptors, link the skip address pointer back to the descriptor itself. When a cycle is lost, the controller will send the packet in the next cycle, instead of terminating the entire DMA program. There are two reasons for this: * This behaviour is compatible with the old IEEE1394 stack. Old applications would not expect the DMA program to stop in this case. * Since the OHCI driver does not report any uncompleted packets, the context would stop silently; clients would not have any chance to detect and handle this error without a watchdog timer. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Pieter Palmers notes: "The reason I added this retry behavior to the old stack is because some cards now and then fail to send a packet (e.g. the o2micro card in my dell laptop). I couldn't figure out why exactly this happens, my best guess is that the card cannot fetch the payload data on time. This happens much more frequently when sending large packets, which leads me to suspect that there are some contention issues with the DMA that fills the transmit FIFO. In the old stack it was a pretty critical issue as it resulted in a freeze of the userspace application. The omission of a packet doesn't necessarily have to be an issue. E.g. in IEC61883 streams the DBC field can be used to detect discontinuities in the stream. So as long as the other side doesn't bail when no [packet] is present in a cycle, there is not really a problem. I'm not convinced though that retrying is the proper solution, but it is simple and effective for what it had to do. And I think there are no reasons not to do it this way. Userspace can still detect this by checking the cycle the descriptor was sent in." Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (changelog, comment)
2010-02-01firewire: net: fix panic in fwnet_write_completeStefan Richter
In the transmit path of firewire-net (IPv4 over 1394), the following race condition may occur: - The networking soft IRQ inserts a datagram into the 1394 async request transmit DMA. - The 1394 async transmit completion tasklet runs to finish cleaning up (unlink datagram from list of pending ones, release skb and outbound 1394 transaction object) --- before the networking soft IRQ had a chance to proceed and add the datagram to the list of pending datagrams. This caused a panic in the 1394 async transmit completion tasklet when it dereferenced unitialized list heads: http://bugzilla.kernel.org/show_bug.cgi?id=15077 The fix is to add checks in the tx soft IRQ and in the tasklet to determine which of these two is the last referrer to the transaction object. Then handle the cleanup of the object by the last referrer rather than assuming that the tasklet is always the last one. There is another similar race: Between said tasklet and fwnet_close, i.e. at ifdown. However, that race is much less likely to occur in practice and shall be fixed in a separate update. Reported-by: Илья Басин <basinilya@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-27firewire: ohci: fix crashes with TSB43AB23 on 64bit systemsStefan Richter
Unsurprisingly, Texas Instruments TSB43AB23 exhibits the same behaviour as TSB43AB22/A in dual buffer IR DMA mode: If descriptors are located at physical addresses above the 31 bit address range (2 GB), the controller will overwrite random memory. With luck, this merely prevents video reception. With only a little less luck, the machine crashes. We use the same workaround here as with TSB43AB22/A: Switch off the dual buffer capability flag and use packet-per-buffer IR DMA instead. Another possible workaround would be to limit the coherent DMA mask to 31 bits. In Linux 2.6.33, this change serves effectively only as documentation since dual buffer mode is not used for any controller anymore. But somebody might want to re-enable it in the future to make use of features of dual buffer DMA that are not available in packet-per-buffer mode. In Linux 2.6.32 and older, this update is vital for anyone with this controller, more than 2 GB RAM, a 64 bit kernel, and FireWire video or audio applications. We have at least four reports: http://bugzilla.kernel.org/show_bug.cgi?id=13808 http://marc.info/?l=linux1394-user&m=126154279004083 https://bugzilla.redhat.com/show_bug.cgi?id=552142 http://marc.info/?l=linux1394-user&m=126432246128386 Reported-by: Paul Johnson Reported-by: Ronneil Camara Reported-by: G Zornetzer Reported-by: Mark Thompson Cc: stable@kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-26firewire: core: fix use-after-free regression in FCP handlerStefan Richter
Commit db5d247a "firewire: fix use of multiple AV/C devices, allow multiple FCP listeners" introduced a regression into 2.6.33-rc3: The core freed payloads of incoming requests to FCP_Request or FCP_Response before a userspace driver accessed them. We need to copy such payloads for each registered userspace client and free the copies according to the lifetime rules of non-FCP client request resources. (This could possibly be optimized by reference counts instead of copies.) The presently only kernelspace driver which listens for FCP requests, firedtv, was not affected because it already copies FCP frames into an own buffer before returning to firewire-core's FCP handler dispatcher. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-26firewire: core: add_descriptor size checkStefan Richter
Presently, firewire-core only checks whether descriptors that are to be added by userspace drivers to the local node's config ROM do not exceed a size of 256 quadlets. However, the sum of the bare minimum ROM plus all descriptors (from firewire-core, from firewire-net, from userspace) must not exceed 256 quadlets. Otherwise, the bounds of a statically allocated buffer will be overwritten. If the kernel survives that, firewire-core will subsequently be unable to parse the local node's config ROM. (Note, userspace drivers can add descriptors only through device files of local nodes. These are usually only accessible by root, unlike device files of remote nodes which may be accessible to lesser privileged users.) Therefore add a test which takes the actual present and required ROM size into account for all descriptors of kernelspace and userspace drivers. Cc: stable@kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-10firewire: make PCI device id constantNémeth Márton
The id_table field of the struct pci_driver is constant in <linux/pci.h> so it is worth to make pci_table also constant. Found with Coccinelle. Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Stefan Richter stefanr@s5r6.in-berlin.de> (changelog)
2009-12-29firewire: qualify config ROM cache pointers as const pointersStefan Richter
Several config ROM related functions only peek at the ROM cache; mark their arguments as const pointers. Ditto fw_device.config_rom and fw_unit.directory, as the memory behind them is meant to be write-once. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire, ieee1394: update Kconfig helpStefan Richter
Update the Kconfig help texts of both stacks to encourage a general move from the older to the newer drivers. However, do not label ieee1394 as "Obsolete" yet, as the newer drivers have not been deployed as default stack in the majority of Linux distributions yet, and those who start doing so now may still want to install the old drivers as fallback for unforeseen issues. Since Linux 2.6.32, FireWire audio devices can be driven by the newer firewire driver stack too, hence remove an outdated comment about audio devices. Also remove comments about library versions since the 2nd generation of libraw1394 and libdc1394 is now in common use; details on library versions can be read at the wiki link from the help texts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: core: fw_csr_string addendumStefan Richter
Witespace and comment changes, and a different way to say i + 1 < end. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: add fw_csr_string() helper functionClemens Ladisch
The core (sysfs attributes), the firedtv driver, and possible future drivers all read strings from some configuration ROM directory. Factor out the generic code from show_text_leaf() into a new helper function, modified slightly to handle arbitrary buffer sizes. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: ohci: always use packet-per-buffer mode for isochronous receptionStefan Richter
This is a minimal change meant for the short term: Never set the ohci->use_dualbuffer flag to true. There are two reasons to do so: - Packet-per-buffer mode and dual-buffer mode do not behave the same under certain circumstances, notably if several packets are covered by a single fw_cdev_iso_packet descriptor. http://marc.info/?l=linux1394-devel&m=124965653718313 Therefore the driver stack should not silently choose one or the other mode but should leave the choice to the high-level driver (regardless if kernel driver or userspace driver). Or simply always only offer packet-per-buffer mode, since a considerable number of controllers, even current ones, does not offer dual-buffer support. - Even under circumstances where packet-per-buffer mode and dual-buffer mode behave exactly the same --- notably when used through libraw1394, libdc1394, as well as the current two kernel drivers which use isochronous reception (firewire-net and firedtv) --- we are still faced with the problem that several OHCI 1.1 controllers have bugs in dual-buffer mode. Although it looks like we have identified most of those buggy controllers by now, we cannot be quite sure about that. So, use packet-per-buffer by default from now on. This change should be followed up by a more complete solution: Either extend the in-kernel API and the userspace ABI by a choice between the two IR modes or remove all dual-buffer related code from firewire-ohci. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: cdev: fix another memory leak in an error pathStefan Richter
If copy_from_user in an FW_CDEV_IOC_SEND_RESPONSE ioctl failed, the fw_request pointed to by the inbound_transaction_resource is no longer referenced and needs to be freed. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: fix use of multiple AV/C devices, allow multiple FCP listenersClemens Ladisch
Control of more than one AV/C device at once --- e.g. camcorders, tape decks, audio devices, TV tuners --- failed or worked only unreliably, depending on driver implementation. This affected kernelspace and userspace drivers alike and was caused by firewire-core's inability to accept multiple registrations of FCP listeners. The fix allows multiple address handlers to be registered for the FCP command and response registers. When a request for these registers is received, all handlers are invoked, and the Firewire response is generated by the core and not by any handler. The cdev API does not change, i.e., userspace is still expected to send a response for FCP requests; this response is silently ignored. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (changelog, rebased, whitespace)
2009-12-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: handle receive packets with a data length of zero
2009-12-11firewire: ohci: handle receive packets with a data length of zeroJay Fenlason
Queueing to receive an ISO packet with a payload length of zero silently does nothing in dualbuffer mode, and crashes the kernel in packet-per-buffer mode. Return an error in dualbuffer mode, because the DMA controller won't let us do what we want, and work correctly in packet-per-buffer mode. Signed-off-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: stable@kernel.org
2009-12-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: Use hweight32 firewire: cdev: reduce stack usage by ioctl_dispatch firewire: ohci: 0 may be a valid DMA address firewire: core: WARN on wrong usage of core transaction functions firewire: core: optimize Topology Map creation firewire: core: clarify generate_config_rom usage firewire: optimize config ROM creation firewire: cdev: normalize variable names firewire: normalize style of queue_work wrappers firewire: cdev: fix memory leak in an error path
2009-12-07Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: kernel/irq/chip.c
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: pass correct iso xmit timestamps to core firewire: ohci: Make cycleMatch ISO transmission work
2009-11-20firewire: ohci: pass correct iso xmit timestamps to coreJay Fenlason
Here is the final set of patches I used to get ffado to work with the new firewire stack. With these patches, I was able to start ardour and record from and playback to my PreSonus Inspire1394 from a (mostly) Fedora 12 system. Signed-off-by: Jay Fenlason <fenlason@redhat.com> Until now, firewire-ohci exposed only the transmit cycle of the last transmitted packet at each isochronous transmit complete event. This made it impossible for FFADO (FireWire audio drivers in userspace) to synchronize audio-out streams. The fix is to store the timestamp of each packet in the iso xmit event. As a bonus, the transfer status is stored too. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-11-18firewire: ohci: Make cycleMatch ISO transmission workJay Fenlason
Calling the START_ISO ioctl with a nonnegative cycle paramater has never worked. Last night I got around to figuring out why. Most of this patch is a big comment explaining why we enable an interrupt source then don't actually do anything when we get one. As the comment says, we should do more, but we don't have a way to tell userspace what happened. . . Signed-off-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited comment)
2009-10-31firewire: cdev: reduce stack usage by ioctl_dispatchStefan Richter
Replace a hardcoded buffer size by a sizeof union {}. This shrinks the stack-allocated ioctl argument buffer from 256 to 40 bytes. (This is not much, but subsequent stack usage particularly by the queue_iso ioctl handler adds up.) The new form is also easier to keep up to date than a hardcoded size if more ioctls are added. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-31firewire: ohci: 0 may be a valid DMA addressStefan Richter
I was told that there are obscure architectures with non-coherent DMA which may DMA-map to bus address 0. We shall not use 0 as a magic number of uninitialized bus address variables. The packet->payload_length > 0 test cannot be used either (except in at_context_queue_packet) because local requests are not DMA-mapped regardless of payload_length. Hence add a state flag to struct fw_packet. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-31firewire: core: WARN on wrong usage of core transaction functionsStefan Richter
In the code path which creates request packets, clearly mark a switch branch which must never be reached with a WARN. In the code path which creates response packets, replace a BUG by a friendlier to debug WARN. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: provide fallback if mgt_ORB_timeout is missing ieee1394: add documentation entry to MAINTAINERS ieee1394: update URLs in debugging-via-ohci1394.txt
2009-10-14firewire: core: optimize Topology Map creationStefan Richter
The Topology Map of the local node was created in CPU byte order, then a temporary big endian copy was created to compute the CRC, and when a read request to the Topology Map arrived it had to be converted to big endian byte order again. We now generate it in big endian byte order in the first place. This also rids us of 1000 bytes stack usage in tasklet context. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14firewire: core: clarify generate_config_rom usageStefan Richter
Move the static config ROM buffer into the scope of the two callers of generate_config_rom(). That way the ROM length can be passed over as return value rather than through a pointer argument. It also becomes more obvious that accesses to the config ROM buffer have to be serialized and how this is accomplished. And firewire-core.ko shrinks a bit as well. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>