summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/r100d.h
AgeCommit message (Collapse)Author
2010-12-21drm/radeon: Definition of R_0003C2_GENMO_WT seems wrongTijl Coosemans
In drivers/gpu/drm/radeon/r100d.h R_0003C2_GENMO_WT is defined as 0x3C0. I think this should be 0x3C2. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon: add basic zmask/hiz support (v4)Dave Airlie
This interface allows userspace to request hyperz support, it probably needs more locking, and really reporting that you can have hyperz is racy since someone else might get it before you do. v2: modify so we pass 0 valued packets to let DDX/r300c keep working. also fixed incorrect 0x4f1c reference. v3: fixup zb_bw_cntl so older drivers keep working v4: add locking, fixup SC_HYPERZ_EN - patch stream to disable hiz Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms/pm: add additional asic callbacksAlex Deucher
- pm_misc() - handles voltage, pcie lanes, and other non clock related power mode settings. Currently disabled. Needs further debugging - pm_prepare() - disables crtc mem requests right now. All memory clients need to be disabled when changing memory clocks. This function can be expanded to include disabling fb access as well. - pm_finish() - enable active memory clients. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06drm/radeon/kms: simplify & improve GPU reset V2Jerome Glisse
This simplify and improve GPU reset for R1XX-R6XX hw, it's not 100% reliable here are result: - R1XX/R2XX works bunch of time in a row, sometimes it seems it can work indifinitly - R3XX/R3XX the most unreliable one, sometimes you will be able to reset few times, sometimes not even once - R5XX more reliable than previous hw, seems to work most of the times but once in a while it fails for no obvious reasons (same status than previous reset just no same happy ending) - R6XX/R7XX are lot more reliable with this patch, still it seems that it can fail after a bunch (reset every 2sec for 3hour bring down the GPU & computer) This have been tested on various hw, for some odd reasons i wasn't able to lockup RS480/RS690 (while they use to love locking up). Note that on R1XX-R5XX the cursor will disapear after lockup haven't checked why, switch to console and back to X will restore cursor. Next step is to record the bogus command that leaded to the lockup. V2 Fix r6xx resume path to avoid reinitializing blit module, use the gpu_lockup boolean to avoid entering inifinite waiting loop on fence while reiniting the GPU Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-01drm/radeon/kms: Convert R100 to new init path (V2)Jerome Glisse
New init path allow to simply asic initialization and make easier to trace what happen on each different asic. We are removing most callback. More cleanup should happen latter to remove even more callback. Also cleanup register specific to R100,RV200,RV250. Version 2 correct the placement on IGP of the VRAM inside GPU address space to match the stollen RAM placement of IGP. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-01drm/radeon/kms: Convert RS400/RS480 to new init path & fix legacy VGA (V3)Jerome Glisse
Also cleanup register specific to RS400/RS480. This patch also fix legacy VGA register used to disable VGA access we were programming wrong register. Now we should properly disable VGA on r100 up to rs400 asics. Note that RS400/RS480 resume is broken, it hangs the computer while reprogramming dynamic clock, doesn't work either without that patch. We need to spend more time investigating this issue. Version 2 of the patch remove dead code that was left commented out in the previous version. Version 3 correct the placement on IGP of the VRAM inside GPU address space to match the stollen RAM placement of IGP. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-14drm/radeon/kms: convert r4xx to new init pathJerome Glisse
This convert r4xx to new init path it also fix few bugs. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-10drm/radeon/kms: wait for cp idle before stopping it.Jerome Glisse
If we stop CP and that it's still processing thing GPU hang might happen, this patch wait for CP idle (the wait can timeout) so we can avoid shutting down CP at bad time. This is especialy usefull when reseting the GPU as it seems GPU reset fails to properly reset CP when the CP wasn't stop after being idle. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-08drm/radeon/kms: add r600 KMS supportJerome Glisse
This adds the r600 KMS + CS support to the Linux kernel. The r600 TTM support is quite basic and still needs more work esp around using interrupts, but the polled fencing should work okay for now. Also currently TTM is using memcpy to do VRAM moves, the code is here to use a 3D blit to do this, but isn't fully debugged yet. Authors: Alex Deucher <alexdeucher@gmail.com> Dave Airlie <airlied@redhat.com> Jerome Glisse <jglisse@redhat.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>