summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2013-07-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS patches (part 1) from Al Viro: "The major change in this pile is ->readdir() replacement with ->iterate(), dealing with ->f_pos races in ->readdir() instances for good. There's a lot more, but I'd prefer to split the pull request into several stages and this is the first obvious cutoff point." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (67 commits) [readdir] constify ->actor [readdir] ->readdir() is gone [readdir] convert ecryptfs [readdir] convert coda [readdir] convert ocfs2 [readdir] convert fatfs [readdir] convert xfs [readdir] convert btrfs [readdir] convert hostfs [readdir] convert afs [readdir] convert ncpfs [readdir] convert hfsplus [readdir] convert hfs [readdir] convert befs [readdir] convert cifs [readdir] convert freevxfs [readdir] convert fuse [readdir] convert hpfs reiserfs: switch reiserfs_readdir_dentry to inode reiserfs: is_privroot_deh() needs only directory inode, actually ...
2013-06-29i810: VM_IO is set by io_remap_pfn_range()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29drm: io_remap_pfn_range() sets VM_IO...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-28drm/qxl: add missing access check for execbuffer ioctlDave Airlie
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-25drm/i915: make compact dma scatter lists creation work with SWIOTLB backend.Konrad Rzeszutek Wilk
Git commit 90797e6d1ec0dfde6ba62a48b9ee3803887d6ed4 ("drm/i915: create compact dma scatter lists for gem objects") makes certain assumptions about the under laying DMA API that are not always correct. On a ThinkPad X230 with an Intel HD 4000 with Xen during the bootup I see: [drm:intel_pipe_set_base] *ERROR* pin & fence failed [drm:intel_crtc_set_config] *ERROR* failed to set mode on [CRTC:3], err = -28 Bit of debugging traced it down to dma_map_sg failing (in i915_gem_gtt_prepare_object) as some of the SG entries were huge (3MB). That unfortunately are sizes that the SWIOTLB is incapable of handling - the maximum it can handle is a an entry of 512KB of virtual contiguous memory for its bounce buffer. (See IO_TLB_SEGSIZE). Previous to the above mention git commit the SG entries were of 4KB, and the code introduced by above git commit squashed the CPU contiguous PFNs in one big virtual address provided to DMA API. This patch is a simple semi-revert - were we emulate the old behavior if we detect that SWIOTLB is online. If it is not online then we continue on with the new compact scatter gather mechanism. An alternative solution would be for the the '.get_pages' and the i915_gem_gtt_prepare_object to retry with smaller max gap of the amount of PFNs that can be combined together - but with this issue discovered during rc7 that might be too risky. Reported-and-Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Chris Wilson <chris@chris-wilson.co.uk> CC: Imre Deak <imre.deak@intel.com> CC: Daniel Vetter <daniel.vetter@ffwll.ch> CC: David Airlie <airlied@linux.ie> CC: <dri-devel@lists.freedesktop.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-25Merge tag 'drm-intel-fixes-2013-06-24' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes One remaining regression fix for i915. I've left it in -fixes for more than a week since it's in tricky code, and it took us a few kernel releases to notice the regression at all. The fence leak is especially annoying on gen2/3 and will kill userspace there quickly. For extra paranoia we've added a WARN in -next to catch this, things seem to be solid now. * tag 'drm-intel-fixes-2013-06-24' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Restore fences after resume and GPU resets
2013-06-20Merge branch 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes One user visible fix to stop misreport GPU hangs and subsequent resets. * 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: update lockup tracking when scheduling in empty ring
2013-06-20drm/radeon: update lockup tracking when scheduling in empty ringJerome Glisse
There might be issue with lockup detection when scheduling on an empty ring that have been sitting idle for a while. Thus update the lockup tracking data when scheduling new work in an empty ring. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Tested-by: Andy Lutomirski <luto@amacapital.net> Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-19Merge branch 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Alex writes: Remove some harmless but confusing VM related error messages fix a regression with suspend and UVD, fix UVD on big endian. * 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix UVD on big endian drm/radeon: fix write back suspend regression with uvd v2 drm/radeon: do not try to uselessly update virtual memory pagetable
2013-06-19drm/prime: Honor requested file flags when exporting a bufferLaurent Pinchart
The DRM PRIME API passes file flags to the driver for the exported buffer. Honor them instead of hardcoding 0600. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-15drm/i915: Restore fences after resume and GPU resetsChris Wilson
Stéphane Marchesin found that fences for pinned objects (i.e. the scanout) were not being restored upon resume, leading to corruption on the display and reference counting issues. This is due to a bug in commit 312817a39f17dbb4de000165b5b724e3728cd91c [2.6.38] Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Nov 22 11:50:11 2010 +0000 drm/i915: Only save and restore fences for UMS that zapped the pinned fences even though they were in use. Fortuitously, whilst we forced a VT switch during suspend and resume, no fences were ever pinned at the time. However, we now can do switchless S3 transitions and so the old bug finally surfaces. Reported-by: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-14drm/radeon: fix UVD on big endianAlex Deucher
This fixes the kernel side so that the ring should come up and ring and IB tests should work. The userspace UVD drivers will also need big endian fixes. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-12drm/radeon: fix write back suspend regression with uvd v2Jerome Glisse
UVD ring can't use scratch thus it does need writeback buffer to keep a valid address or radeon_ring_backup will trigger a kernel fault. It's ok to not unpin the write back buffer on suspend as it leave in gtt and thus does not need eviction. v2: Fix the uvd case. Reported and tracked by Wojtek <wojtask9@wp.pl> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-12drm/radeon: do not try to uselessly update virtual memory pagetableJerome Glisse
If a buffer is never bound to a virtual memory pagetable than don't try to unbind it. Only drawback is that we don't update the pagetable when unbinding the ib pool buffer which is fine because it only happens at suspend or module unload/shutdown. Fixes spurious messages about buffers without VM mappings. E.g.: radeon 0000:01:00.0: bo ffff88020afac400 don't has a mapping in vm ffff88021ca2b900 Cc: stable@kernel.org Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-11Merge tag 'drm-intel-fixes-2013-06-11' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: Just tiny regression fixes here: - Two fixes to fix sdvo hotplug which broke in the hpd storm detection work. - One fix to patch-up the sdvo lvds regression fixer from the last pull - we need to prefer the vbt mode over edid modes. * tag 'drm-intel-fixes-2013-06-11' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: prefer VBT modes for SVDO-LVDS over EDID drm/i915: Enable hotplug interrupts after querying hw capabilities. drm/i915: Fix hotplug interrupt enabling for SDVOC
2013-06-10Merge branch 'gma500-fixes' of git://github.com/patjak/drm-gma500 into drm-fixesDave Airlie
Patrik writes: Two fixes for memory leaks split into Cedarview and Poulsbo versions, and a fix for properly setting the pipe base when using fbdev. It's on my todo-list to start unifying the chips since they are very similar, but until then I'd like to split them up in case there are side-effects on Cedarview that I cannot currently test. airled: Verified pull from github matches what I expected. * 'gma500-fixes' of git://github.com/patjak/drm-gma500: drm/gma500/cdv: Fix cursor gem obj referencing on cdv drm/gma500/psb: Fix cursor gem obj referencing on psb drm/gma500/cdv: Unpin framebuffer on crtc disable drm/gma500/psb: Unpin framebuffer on crtc disable drm/gma500: Add fb gtt offset to fb base
2013-06-10drm/i915: prefer VBT modes for SVDO-LVDS over EDIDDaniel Vetter
In commit 53d3b4d7778daf15900867336c85d3f8dd70600c Author: Egbert Eich <eich@suse.de> Date: Tue Jun 4 17:13:21 2013 +0200 drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC Egbert Eich fixed a long-standing bug where we simply used a non-working i2c controller to read the EDID for SDVO-LVDS panels. Unfortunately some machines seem to not be able to cope with the mode provided in the EDID. Specifically they seem to not be able to cope with a 4x pixel mutliplier instead of a 2x one, which seems to have been worked around by slightly changing the panels native mode in the VBT so that the dotclock is just barely above 50MHz. Since it took forever to notice the breakage it's fairly safe to assume that at least for SDVO-LVDS panels the VBT contains fairly sane data. So just switch around the order and use VBT modes first. v2: Also add EDID modes just in case, and spell Egbert correctly. v3: Elaborate a bit more about what's going on on Chris' machine. Cc: Egbert Eich <eich@suse.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65524 Cc: stable@vger.kernel.org Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-10drm/i915: Enable hotplug interrupts after querying hw capabilities.Chris Wilson
sdvo->hotplug_active is initialised during intel_sdvo_setup_outputs(), and so we never enabled the hotplug interrupts on SDVO as we were checking too early. This regression has been introduced somewhere in the hpd rework for the storm detection and handling starting with commit 1d843f9de4e6dc6a899b6f07f106c00da09925e6 Author: Egbert Eich <eich@suse.de> Date: Mon Feb 25 12:06:49 2013 -0500 DRM/I915: Add enum hpd_pin to intel_encoder. and the follow-up patches to use the new encoder->hpd_pin variable for the different irq setup functions. The problem is that encoder->hpd_pin was set up _before_ the output setup was done and so before we could assess the hotplug capabilities of the outputs on an sdvo encoder. Reported-by: Alex Fiestas <afiestas@kde.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58405 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add regression note.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-10drm/i915: Fix hotplug interrupt enabling for SDVOCChris Wilson
A broken conditional would lead to SDVOC waiting upon hotplug events on SDVOB - and so miss all activity on its SDVO port. This regression has been introduced in commit 1d843f9de4e6dc6a899b6f07f106c00da09925e6 Author: Egbert Eich <eich@suse.de> Date: Mon Feb 25 12:06:49 2013 -0500 DRM/I915: Add enum hpd_pin to intel_encoder. References: https://bugs.freedesktop.org/show_bug.cgi?id=58405 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add regression note.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-09drm/gma500/cdv: Fix cursor gem obj referencing on cdvPatrik Jakobsson
The internal crtc cursor gem object pointer was never set/updated since it was required to be set in the first place. Fixing this will make the pin/unpin count match and prevent cursor objects from leaking when userspace drops all references to it. Also make sure we drop the gem obj reference on failure. This patch only affects Cedarview chips. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-06-09drm/gma500/psb: Fix cursor gem obj referencing on psbPatrik Jakobsson
The internal crtc cursor gem object pointer was never set/updated since it was required to be set in the first place. Fixing this will make the pin/unpin count match and prevent cursor objects from leaking when userspace drops all references to it. Also make sure we drop the gem obj reference on failure. This patch only affects Poulsbo chips. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-06-09drm/gma500/cdv: Unpin framebuffer on crtc disablePatrik Jakobsson
The framebuffer needs to be unpinned in the crtc->disable callback because of previous pinning in psb_intel_pipe_set_base(). This will fix a memory leak where the framebuffer was released but not unpinned properly. This patch only affects Cedarview. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511 Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113 Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-06-09drm/gma500/psb: Unpin framebuffer on crtc disablePatrik Jakobsson
The framebuffer needs to be unpinned in the crtc->disable callback because of previous pinning in psb_intel_pipe_set_base(). This will fix a memory leak where the framebuffer was released but not unpinned properly. This patch only affects Poulsbo. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511 Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113 Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-06-05Merge branch 'drm-nouveau-fixes-3.10' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Multiple nouveau regression fixes, hdmi audio, s/r and dac load detection * 'drm-nouveau-fixes-3.10' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nv50/kms: use dac loadval from vbios, where it's available drm/nv50/disp: force dac power state during load detect drm/nv50-nv84/fifo: fix resume regression introduced by playlist race fix drm/nv84/disp: Fix HDMI audio regression
2013-06-05Merge tag 'drm-intel-fixes-2013-06-04' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: Three regression fixes and one no-lvds quirk update. The regression Egbert Eich tracked down goes back to 2.6.37 ... ugh. The other two are pretty minor: One bogus modeset state checker WARN and a patch to prevent X dying in a SIGBUS after a gpu hang with failed (or not implement as on gen2/3) gpu reset. * tag 'drm-intel-fixes-2013-06-04' of git://people.freedesktop.org/~danvet/drm-intel: (368 commits) drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC. drm/i915: no lvds quirk for hp t5740 drm/i915: Quirk the pipe A quirk in the modeset state checker drm/i915: Fix spurious -EIO/SIGBUS on wedged gpus Linux 3.10-rc4 parisc: parport0: fix this legacy no-device port driver! parport_pc: disable PARPORT_PC_SUPERIO on parisc architecture parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2) parisc/PCI: Set type for LBA bus_num resource MAINTAINERS: update parisc architecture file list parisc: kernel: using strlcpy() instead of strcpy() parisc: rename "CONFIG_PA7100" to "CONFIG_PA7000" parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 parisc: memory overflow, 'name' length is too short for using powerpc/cputable: Fix typo on P7+ cputable entry powerpc/perf: Add missing SIER support powerpc/perf: Revert to original NO_SIPR logic powerpc/pci: Remove the unused variables in pci_process_bridge_OF_ranges powerpc/pci: Remove the stale comments of pci_process_bridge_OF_ranges powerpc/pseries: Always enable CONFIG_HOTPLUG_CPU on PSERIES SMP ...
2013-06-05drm/nv50/kms: use dac loadval from vbios, where it's availableBen Skeggs
Regression from merging the old nv50/nvd9 code together, and may be needed to fully fix fdo#64904. The value is ignored completely by the hardware starting from nva3. Reported-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-06-05drm/nv50/disp: force dac power state during load detectBen Skeggs
fdo#64904 Reported-by: Gerhard Bräunlich <wippbox@gmx.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-06-05drm/nv50-nv84/fifo: fix resume regression introduced by playlist race fixBen Skeggs
Reported-by: Maarten Maathuis <madman2003@gmail.com> Reported-by: Sven Joachim <svenjoac@gmx.de> Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-06-05drm/nv84/disp: Fix HDMI audio regressionAlexander Stein
Code refactoring in commit 8e9e3d2deacc460fbb8a4691140318f6e85e6891 (drm/nv84/disp: move hdmi control into core) disabled HDMI audio on my nv84 by removing too much old code without adding it in the new one. This patch adds the missing code within the new code layout resulting in HDMI audio working again. It should work on any HDMI head, but due to lacking ahrdware I could only test the (1st) one. It also might be possible that similar code is needed for nva3, which I can't test. Signed-off-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-06-04drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC.Egbert Eich
In intel_sdvo_get_lvds_modes() the wrong i2c adapter record is used for DDC. Thus the code will always have to rely on a LVDS panel mode supplied by VBT. In most cases this succeeds, so this didn't get detected for quite a while. This regression seems to have been introduced in commit f899fc64cda8569d0529452aafc0da31c042df2e Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Jul 20 15:44:45 2010 -0700 drm/i915: use GMBUS to manage i2c links Signed-off-by: Egbert Eich <eich@suse.de> Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add note about which commit likely introduced this issue.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-03drm/radeon: don't allow audio on DCE6Alex Deucher
It's not supported yet. Fixes display issues when users force it on. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-06-03drm/radeon: Use direct mapping for fast fb access on RS780/RS880 (v2)Samuel Li
v2: fix trailing whitespace Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-03radeon: Fix system hang issue when using KMS with older cardsAdis Hamzić
The current radeon driver initialization routines, when using KMS, are written so that the IRQ installation routine is called before initializing the WB buffer and the CP rings. With some ASICs, though, the IRQ routine tries to access the GFX_INDEX ring causing a call to RREG32 with the value of -1 in radeon_fence_read. This, in turn causes the system to completely hang with some cards, requiring a hard reset. A call stack that can cause such a hang looks like this (using rv515 ASIC for the example here): * rv515_init (rv515.c) * radeon_irq_kms_init (radeon_irq_kms.c) * drm_irq_install (drm_irq.c) * radeon_driver_irq_preinstall_kms (radeon_irq_kms.c) * rs600_irq_process (rs600.c) * radeon_fence_process - due to SW interrupt (radeon_fence.c) * radeon_fence_read (radeon_fence.c) * hang due to RREG32(-1) The patch moves the IRQ installation to the card startup routine, after the ring has been initialized, but before the IRQ has been set. This fixes the issue, but requires a check to see if the IRQ is already installed, as is the case in the system resume codepath. I have tested the patch on three machines using the rv515, the rv770 and the evergreen ASIC. They worked without issues. This seems to be a known issue and has been reported on several bug tracking sites by various distributions (see links below). Most of reports recommend booting the system with KMS disabled and then enabling KMS by reloading the radeon module. For some reason, this was indeed a usable workaround, however, UMS is now deprecated and disabled by default. Bug reports: https://bugzilla.redhat.com/show_bug.cgi?id=845745 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/561789 https://bbs.archlinux.org/viewtopic.php?id=156964 Signed-off-by: Adis Hamzić <adis@hamzadis.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-06-03drm/i915: no lvds quirk for hp t5740Ben Mesman
Last year, a patch was made for the "HP t5740e Thin Client" (see http://lists.freedesktop.org/archives/dri-devel/2012-May/023245.html). This device reports an lvds panel, but does not really have one. The predecessor of this device is the "hp t5740", which also does not have an lvds panel. This patch will add the same quirk for this device. Signed-off-by: Ben Mesman <ben@bnc.nl> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-03drm/i915: Quirk the pipe A quirk in the modeset state checkerDaniel Vetter
If we always force the pipe A to on we can't use the hw state to decide whether it should be on. Hence quirk the quirk. The problem is that crtc->active tracks the state of the entire display pipe, i.e. including planes, encoders and all. But our hw state readout simply looks at the pipe. But with the pipe A quirk we force-enable that (together with it's pll). To fix that mismatch we have two options: - Quirk the checked state to match what our sw tracking states if the pipe A quirk is in effect. - Improve the hw state readout to not get fooled by the pipe A quirk. Since we already have similar state clamping in e.g. assert_pipe I've opted for the first variant. Also note that we don't really loose any state checking: Individual pieces of the abstract crtc pipe are checked in the enable/disable functions with the various asssert_* checks we have, and the hw state check code doesn't check anything if the pipe is off anyway. v2: Pimp commit message after discussion with Chris and only apply the quirk for the quirk if we're checking pipe A. Otherwise we'll miss state checking for pipe B on i830M ... v3: Make the code comment consistent with the improved commit message, too (Chris). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64764 Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-and-Tested-by: mlsemon35@gmail.com (v1) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-03drm/i915: Fix spurious -EIO/SIGBUS on wedged gpusDaniel Vetter
Chris Wilson noticed that since commit 1f83fee08d625f8d0130f9fe5ef7b17c2e022f3c [v3.9] Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Nov 15 17:17:22 2012 +0100 drm/i915: clear up wedged transitions X can again get -EIO when it does not expect it. And even worse score a SIGBUS when accessing gtt mmaps. The established ABI is that we _only_ return an -EIO from execbuf - all other ioctls should just work. And since the reset code moves all bos out of gpu domains and clears out all the last_seqno/ring tracking there really shouldn't be any reason for non-execbuf code to ever touch the hw and see an -EIO. After some extensive discussions we've noticed that these spurios -EIO are caused by i915_gem_wait_for_error: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg20540.html That is easy to fix by returning 0 instead of -EIO, since grabbing the dev->struct_mutex does not yet mean that we actually want to touch the hw. And so there is no reason at all to fail with -EIO. But that's not the entire since, since often (at least it's easily googleable) dmesg indicates that the reset fails and we declare the gpu wedged. Then, quite a bit later X wakes up with the "Timed out waiting for the gpu reset to complete" DRM_ERROR message in wait_for_errror and brings down the desktop with an -EIO/SIGBUS. So clearly we're missing a wakeup somewhere, since the gpu reset just doesn't take 10 seconds to complete. And indeed we're do handle the terminally wedged state wrong. Fix this all up. References: https://bugs.freedesktop.org/show_bug.cgi?id=63921 References: https://bugs.freedesktop.org/show_bug.cgi?id=64073 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-03drm/mgag200: Add missing write to index before accessing data registerChristopher Harvey
This is a bug fix for some versions of g200se cards while doing mode-setting. Signed-off-by: Christopher Harvey <charvey@matrox.com> Tested-by: Julia Lemire <jlemire@matrox.com> Acked-by: Julia Lemire <jlemire@matrox.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-06-03drm/nouveau: use mdelay instead of large udelay constantsArnd Bergmann
ARM cannot handle udelay for more than 2 miliseconds, so we should use mdelay instead for those. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: David Airlie <airlied@linux.ie> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-06-03drm/tilcd: select BACKLIGHT_LCD_SUPPORTArnd Bergmann
The dependecies for BACKLIGHT_CLASS_DEVICE are defined a bit strange, but it seems one has to always select both BACKLIGHT_CLASS_DEVICE and BACKLIGHT_LCD_SUPPORT to avoid this error: drivers/gpu/drm/tilcdc/tilcdc_panel.c:396: undefined reference to `of_find_backlight_by_node' Cc: Rob Clark <robdclark@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-06-03drm: fix a use-after-free when GPU acceleration disabledHuacai Chen
When GPU acceleration is disabled, drm_vblank_cleanup() will free the vblank-related data, such as vblank_refcount, vblank_inmodeset, etc. But we found that drm_vblank_post_modeset() may be called after the cleanup, which use vblank_refcount and vblank_inmodeset. And this will cause a kernel panic. Fix this by return immediately if dev->num_crtcs is zero. This is the same thing that drm_vblank_pre_modeset() does. Call trace of a drm_vblank_post_modeset() after drm_vblank_cleanup(): [ 62.628906] [<ffffffff804868d0>] drm_vblank_post_modeset+0x34/0xb4 [ 62.628906] [<ffffffff804c7008>] atombios_crtc_dpms+0xb4/0x174 [ 62.628906] [<ffffffff804c70e0>] atombios_crtc_commit+0x18/0x38 [ 62.628906] [<ffffffff8047f038>] drm_crtc_helper_set_mode+0x304/0x3cc [ 62.628906] [<ffffffff8047f92c>] drm_crtc_helper_set_config+0x6d8/0x988 [ 62.628906] [<ffffffff8047dd40>] drm_fb_helper_set_par+0x94/0x104 [ 62.628906] [<ffffffff80439d14>] fbcon_init+0x424/0x57c [ 62.628906] [<ffffffff8046a638>] visual_init+0xb8/0x118 [ 62.628906] [<ffffffff8046b9f8>] take_over_console+0x238/0x384 [ 62.628906] [<ffffffff80436df8>] fbcon_takeover+0x7c/0xdc [ 62.628906] [<ffffffff8024fa20>] notifier_call_chain+0x44/0x94 [ 62.628906] [<ffffffff8024fcbc>] __blocking_notifier_call_chain+0x48/0x68 [ 62.628906] [<ffffffff8042d990>] register_framebuffer+0x228/0x260 [ 62.628906] [<ffffffff8047e010>] drm_fb_helper_single_fb_probe+0x260/0x314 [ 62.628906] [<ffffffff8047e2c4>] drm_fb_helper_initial_config+0x200/0x234 [ 62.628906] [<ffffffff804e5560>] radeon_fbdev_init+0xd4/0xf4 [ 62.628906] [<ffffffff804e0e08>] radeon_modeset_init+0x9bc/0xa18 [ 62.628906] [<ffffffff804bfc14>] radeon_driver_load_kms+0xdc/0x12c [ 62.628906] [<ffffffff8048b548>] drm_get_pci_dev+0x148/0x238 [ 62.628906] [<ffffffff80423564>] local_pci_probe+0x5c/0xd0 [ 62.628906] [<ffffffff80241ac4>] work_for_cpu_fn+0x1c/0x30 [ 62.628906] [<ffffffff802427c8>] process_one_work+0x274/0x3bc [ 62.628906] [<ffffffff80242934>] process_scheduled_works+0x24/0x44 [ 62.628906] [<ffffffff8024515c>] worker_thread+0x31c/0x3f4 [ 62.628906] [<ffffffff802497a8>] kthread+0x88/0x90 [ 62.628906] [<ffffffff80206794>] kernel_thread_helper+0x10/0x18 Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Binbin Zhou <zhoubb@lemote.com> Cc: <stable@vger.kernel.org> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Acked-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-06-01Merge tag 'fbdev-for-3.10-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev Pull fbdev fixes from Jean-Christophe PLAGNIOL-VILLARD: "This contains some small fixes - Atmel LCDC: fix blank the backlight on remove - ps3fb: fix compile warning - OMAPDSS: Fix crash with DT boot" * tag 'fbdev-for-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev: atmel_lcdfb: blank the backlight on remove trivial: atmel_lcdfb: add missing error message OMAPDSS: Fix crash with DT boot fbdev/ps3fb: fix compile warning
2013-05-31drm/qxl: fix build warnings on 32-bitDave Airlie
Just the usual printk related warnings. Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-29radeon: use max_bus_speed to activate gen2 speedsKleber Sacilotto de Souza
radeon currently uses a drm function to get the speed capabilities for the bus, drm_pcie_get_speed_cap_mask. However, this is a non-standard method of performing this detection and this patch changes it to use the max_bus_speed attribute. From: Lucas Kannebley Tavares <lucaskt@linux.vnet.ibm.com> Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-29drm/radeon: narrow scope of Apple re-POST hackAlex Deucher
This narrows the scope of the apple re-POST hack added in: drm/radeon: re-POST the asic on Apple hardware when booted via EFI That patch prevents UVD from working on macs when booted in EFI mode. The original patch fixed macbook2,1 systems which were r5xx and hence have no UVD. Limit the hack to those systems to prevent UVD breakage on newer systems. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63935 Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-29drm/radeon: don't check crtcs in card_posted() on cards without DCEAlex Deucher
Skip checking crtcs in hardware without them. Avoids checking non-existent hardware. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-29drm/radeon: fix card_posted check for newer asicsAlex Deucher
Newer asics have variable numbers of crtcs. Use that rather than the asic family to determine which crtcs to check. This avoids checking non-existent crtcs or missing crtcs on certain asics. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-05-29drm/radeon: fix typo in cu_per_sh on verdeAlex Deucher
Should be 5 rather than 2. Noticed by sroland and glisse on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-05-29drm/radeon: UVD block on SUMO2 is the same as on SUMOChristian König
The chip id for SUMO2 isn't used. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63935 Tested-By: Dave Witbrodt <dawitbro@sbcglobal.net> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-29Merge branch 'fbdev-3.10-fixes' of git://gitorious.org/linux-omap-dss2/linux ↵Jean-Christophe PLAGNIOL-VILLARD
into linux-fbdev/for-3.10-fixes Pull Tomi fixes for ps3fb and omap2 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-05-28qxl: fix Kconfig deps - select FB_DEFERRED_IOAndrew Jones
Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>