summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2009-10-15drm/radeon/kms: limit default tv modes to <= 1024x768Alex Deucher
fixes fdo bug 24496 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-15drm/radeon/kms/atom: fix tv-outAlex Deucher
D1MODE_INTERLEAVE_EN was getting set in some cases in the encoder quirks function due to the changes in 5a9bcacc0a56f0d9577494e834519480018a6cc3 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-15drm/radeon/kms: fix connector edid handlingAlex Deucher
Based partly on a patch from Christian Koenig <deathsimple@vodafone.de> - fix several memory leaks in radeon_connector->edid handling - store edid in radeon_connector->edid in detect() or get_modes() - switch hdmi detect code to use radeon_connector->edid - add support for oem boards multiple connectors that share a ddc line. - short circuit lvds_detect() if have a stored edid Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-15drm/i915: Install a fence register for fbc on g4xChris Wilson
To enable framebuffer compression on a g4x, we not only need the buffer to tiled (X only), we also need to hold a fence register for the buffer. Currently we only install a fence register for pre-i965s when setting up the scanout buffer. Rather than adding some convoluted logic to g4x_enable_fbc() to acquire a fence register, and perhaps to g4x_disable_fbc() to release it again, we can extend the acquisition during setup to all chipsets. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-10-15drm/i915: save/restore BLC histogram control reg across suspend/resumeJesse Barnes
Turns out some machines, like the ThinkPad X40 don't come back if you don't save/restore this register. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-10-15drm/radeon/kms: fix internal tmds setup on legacy display engineAlex Deucher
- crtc 0 routing was wrong - need to clear various timing bits in FP_GEN_CNTL - need to set FP_H/V2_SYNC_STRT_WID regs for crtc 1 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-15drm/radeon/kms: move active_device setup into encoder fixup()Alex Deucher
radeon_encoder->active_device defines the active routing between the encoder and connector. The encoder fixup and dpms functions need to know the active_device to function properly. Setting active_device in the prepare hook was too late in some cases. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-13drm/i915: Fix FDI M/N setting according with correct color depthZhenyu Wang
FDI M/N calculation hasn't taken the current pipe color depth into account, but always set as 24bpp. This one checks current pipe color depth setting, and change FDI M/N calculation a little to use bits_per_pixel first, then convert to bytes_per_pixel later. This fixes display corrupt issue on Arrandle LVDS with 1600x900 panel in 18bpp dual-channel mode. Cc: Stable Team <stable@kernel.org> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-10-13drm/i915: disable powersave feature for Ironlake currentlyZhenyu Wang
Until we figure out the right setting for powersave features on Ironlake, disable it for now. Also disable watermark update, which has new registers for it on Ironlake too. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [anholt: Resolved against the Pineview FBC changes] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-10-13drm/i915: Fix render reclock availability detection.Andy Lutomirski
If the device didn't support EDP, we would bail out too soon. Signed-off-by: Andy Lutomirski <luto@mit.edu> [anholt: Pulled this patch out of the patch for adding quirks to enable reclocking.] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-10-13drm/i915: Save and restore the GM45 FBC regs on suspend and resume.Jesse Barnes
This hasn't fixed the regressions we were testing against, but clearly should be required. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-10-13drm/i915: Set the LVDS_BORDER when using LVDS scaling modeZhao Yakui
According to the spec the LVDS_BORDER_ENABLE bit decides whether the border data should be included in the active display and data sent to the panel. Border should be used when in VGA centered (un-scaled) mode or when scaling a 4:3 source image to a wide screen panel (typical 16:9). So when the LVDS scaling is used, decide whether the LVDS_BORDER should be enabled or not according to the current scaling mode. At the same time fix the typo error in LVDS center scaling mode. https://bugs.freedesktop.org/show_bug.cgi?id=23789 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> tested-by: Zhao Jian <jian.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-10-13drm/i915: disable FBC for Pineview, fixing a boot hang.Shaohua Li
Pineview doesn't have this FBC mechanism, so this code doesn't apply. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-10-12drm/radeon/kms: properly handle mode id with native mode changesAlex Deucher
drm modes are objects with indentifiers. Make sure to preserve the mode id when copying mode params. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-12drm/radeon/kms: fix use of index before proper initialisation.Dave Airlie
With the adjust table introduction, we need to fill out index before getting the table version. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-12drm/radeon: Revert "drm/r600: avoid assigning vb twice in blit code"Dave Airlie
This reverts commit 49c458e544ae14514209ed80ea6829ca1b18ddf0. It seems to have some side effects in the non-kms cases. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-12drm/radeon/kms: also check for edid in lvds detectAlex Deucher
In case the system has bad native mode info but valid edid. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-12drm/radeon/kms: use drm_mode directly for panel modesAlex Deucher
This reduces the number of mode format conversions needed and makes native panel mode support cleaner. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-12drm/radeon/kms/atom: rework crtc modesetAlex Deucher
- clean up tv timing handling - unify SetCRTC_Timing and SetCRTC_UsingDTDTiming Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-12drm/radeon/kms/atom: add support for AdjustDisplayPllAlex Deucher
DCE3+ has an AdjustDisplayPll that will adjust the pixel clock accordingly based on the encoder/transmitter to handle special hw requirements. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-12drm/radeon/kms/atom: reorder crtc dpmsAlex Deucher
Based on recommendation from bios docs. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-12drm/radeon/kms: make sure LVDS panel is valid in detect()Alex Deucher
If the panel data is bogus this can lead to problems later when the hardware trys to set the mode. If the data is invalid, report LVDS as disconnected. Should fix fdo bug 24247. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-12drm/radeon/kms: Fix apparent typo in legacy CRTC memory bandwidth calculation.Michel Dänzer
While investigating the cause of CRTC FIFO underruns, I noticed that when converting the memory bandwidth calculation from the userspace X driver code, an instance of '8.0' was apparently accidentally converted to '80'. Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-12drm/radeon/kms: Update memory bandwidth requirements in mode_set_base hook.Michel Dänzer
The hook may change the number of bytes per pixel being scanned out, which affects the CRTC memory bandwidth requirements. E.g. booting in 8bpp and then running X in 32bpp would result in the bandwidth requirements being underestimated for the latter and consequently in CRTC FIFO underruns causing visible artifacts with 3D intensive workloads. ATOM changes only compile-tested. Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-12drm/radeon/kms: don't refuse LUT because no framebuffer.Dave Airlie
The fb binding might be happening in a subsequent crtc setup call. gets rid of some lut issues. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-09Merge branch 'drm-intel-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Initialize HDMI outputs as HDMI connectors, not DVI. drm/i915: Multiply the refresh by 1000 in TV mode validatiion drm/i915: Enable irq to trace batch buffer completion. drm/i915: batch submit seqno off-by-one. drm/i915: Record device minor rather than pointer in TRACE_EVENT drm/i915: Don't call intel_update_fbc from intel_crtc_cursor_set
2009-10-08Merge branch 'drm-next' of ../drm-next into drm-linusDave Airlie
conflict in radeon since new init path merged with vga arb code. Conflicts: drivers/gpu/drm/radeon/radeon.h drivers/gpu/drm/radeon/radeon_asic.h drivers/gpu/drm/radeon/radeon_device.c
2009-10-08drm/radeon/kms: fix vline register for second head.Dave Airlie
Both r100/r600 had this wrong, use the macro to extract the register to relocate. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-07drm/r600: avoid assigning vb twice in blit codeRobert Noland
There is no need to assign vb before you know that space is available. [agd5f: adapted for kernel tree.] Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-07drm/radeon: use list_for_each_entry instead of list_for_eachDave Airlie
This is just a cleanup of the list macro usage. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-07drm/radeon/kms: Fix AGP support for R600/RV770 family (v2)Jerome Glisse
For AGP to work unmapped access must cover VRAM & AGP as AGP is treated like VRAM by the GPU (ie physical address). This patch properly setup the virtual memory system aperture to cover AGP if AGP is enabled. It seems that there is memory corruption after resume when using AGP (RV770 seems unaffected thought). Version 2 just fix merge issue with updated AGP fallback patch. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-07drm/radeon/kms: Fallback to non AGP when acceleration fails to initialize (v2)Jerome Glisse
When GPU acceleration is not working with AGP try to fallback to non AGP GART (either PCI or PCIE GART). This should make KMS failure on AGP less painfull. We still need to find out what is wrong when AGP fails but at least user have a lot of more chances to get a working configuration with acceleration. This patch also cleanup R600/RV770 fallback path so they use same code as others asics. Version 2 factorize agp disabling logic to avoid code duplication and bugs. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-07drm/radeon/kms: Fix RS600/RV515/R520/RS690 IRQJerome Glisse
Bad generated header file leaded to use wrong register to check IRQ status and acknowledge them. Fix the header and use proper registers. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-07drm/radeon: Fix setting of bitsRoel Kluin
Duplicate bits set Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-06drm/ttm: fix refcounting in ttm global code.Dave Airlie
the global refcount wasn't being increased after the first reference. this caused an oops on unload on a multi-gpu card. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-06drm/fb: add more correct 8/16/24/32 bpp fb support.Dave Airlie
The previous patches had some unwanted side effects, I've fixed the lack of 32bpp working, and fixed up 16bpp so it should also work. this also adds the interface to allow the driver to set a preferred console depth so for example low memory rn50 can set it to 8bpp. It also catches 24bpp on cards that can't do it and forces 32bpp. Tested on r100/r600/i945. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05drm/fb: add setcmap and fix 8-bit support.Dave Airlie
This adds support for the setcmap api and fixes the 8bpp support at least on radeon hardware. It adds a new load_lut hook which can be called once the color map is setup. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05drm/radeon/kms: respect single crtc cards, only create one crtc. (v2)Dave Airlie
Also add single crtc for RN50 chips. changes in v2: fix vblank init to respect single crtc flag fix r100 mode bandwidth to respect single crtc flag Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05drm: Delete the DRM_DEBUG_KMS in drm_mode_cursor_ioctlZhao Yakui
We can get the corresponding info by adding the boot option of "drm.debug= 0x07". But On some boxes it will print the following message many times in course of moving mouse. In such case the useful DRM debug info will be flushed. >[drm:drm_mode_cursor_ioctl], Avoid using the DRM_DEBUG_KMS in drm_mode_cursor_ioctl. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05drm/radeon/kms: add support for "Surround View"Alex Deucher
"Surround View" is an option in the system bios that enables the AMD IGP chip in conjunction with a discrete AMD card. However, since the IGP vbios is part of the system bios it is not accessible via the rom bar or the legacy vga location. When "Surround View" is enabled in the system bios, the system bios puts a copy of the IGP vbios image at the start of vram. This patch adds support for reading the vbios image out of vram on IGP cards. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-02drm/i915: Initialize HDMI outputs as HDMI connectors, not DVI.Adam Jackson
Even if the physical output connector is DVI, calling it HDMI tells the user that there's HDMI audio signaling support. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-10-02drm/i915: Multiply the refresh by 1000 in TV mode validatiionZhao Yakui
As of 559ee21d261a54c42594ef9405d27e9008eedf44 the actual refresh rate is returned by the function of drm_mode_vrefresh, so multiply the refresh rate by 1000 in TV mode validation. At the same time the error is expanded from 10 to 1000. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-10-02Merge commit 'ickle/for-anholt' into drm-intel-nextEric Anholt
2009-10-01drm/radeon/kms: Fix irq handling on AVIVO hwJerome Glisse
Avivo hw have vblank interrupt in different place, fixes irq handling (especialy irq disabling while suspending or shuting down the module). Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-01drm/radeon/kms: R600/RV770 remove dead code and print message for wrong BIOSJerome Glisse
R600 & RV770 family are all using atombios so remove dead code and print an error message if we fail to find a valid atombios. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-01drm/radeon/kms: Fix R600/RV770 disable acceleration pathJerome Glisse
When acceleration doesn't work we should free associated memory and stop GPU block responsible for hardware acceleration so we don't waste resource or let think one component of the driver that a GPU feature is working/running while it doesn't actualy work. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-01drm/radeon/kms: Fix R600/RV770 startup path & resetJerome Glisse
We were calling reset unconditionaly in the startup path this is bad we need to call GPU reset for a good reason as after reset the GPU is in unknown states. To avoid any more bad things to happen we now also unconditionaly reinitialize the GPU after reset. This patch fix few issues reported by different people regarding KMS & R6XX/RV7XX hw. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-01drm/radeon/kms: Fix R600 write back bufferJerome Glisse
This split write back buffer handling into 3 functions, wb_fini for cleanup, wb_enable/wb_disable for enabling/disabling write back used for suspend/resume. This should fix potential issue of letting the write back active before suspending. We need to allocate memory in wb_enable because we can only allocate once GART is running. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-01drm/radeon/kms: Remove old init path as no hw use it anymoreJerome Glisse
This remove old init path and allow code cleanup, now all hw use the new init path, see top of radeon.h for description of this. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-01drm/radeon/kms: Convert RS600 to new init pathJerome Glisse
New init path allow to simply asic initialization and make easier to trace what happen on each different asic. We are removing most callback. Do a massive RS600 register cleanup to clarify RS600 register, we are still bit fuzy on some register and waiting for more informations. I don't have hw to test, so this patch is a best effort to not break anythings and to try to improve things. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>