summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)Author
2013-10-21HID: wiimote: add LEGO-wiimote VIDDavid Herrmann
The LEGO-wiimote uses a different VID than the Nintendo ID. The device is technically the same so add the ID. Cc: <stable@vger.kernel.org> # 3.11+ Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-18HID: Fix unit exponent parsing againNikolai Kondrashov
Revert some changes done in 774638386826621c984ab6994439f474709cac5e. Revert all changes done in hidinput_calc_abs_res as it mistakingly used "Unit" item exponent nibbles to affect resolution value. This wasn't breaking resolution calculation of relevant axes of any existing devices, though, as they have only one dimension to their units and thus 1 in the corresponding nible. Revert to reading "Unit Exponent" item value as a signed integer in hid_parser_global to fix reading specification-complying values. This fixes resolution calculation of devices complying to the HID standard, including Huion, KYE, Waltop and UC-Logic graphics tablets which have their report descriptors fixed by the drivers. Explanations follow. There are two "unit exponents" in HID specification and it is important not to mix them. One is the global "Unit Exponent" item and another is nibble values in the global "Unit" item. See 6.2.2.7 Global Items. The "Unit Exponent" value is just a signed integer and is used to scale the integer resolution unit values, so fractions can be expressed. The nibbles of "Unit" value are used to select the unit system (nibble 0), and presence of a particular basic unit type in the unit formula and its *exponent* (or power, nibbles 1-6). And yes, the latter is in two complement and zero means absence of the unit type. Taking the representation example of (integer) joules from the specification: [mass(grams)][length(centimeters)^2][time(seconds)^-2] * 10^-7 the "Unit Exponent" would be -7 (or 0xF9, if stored as a byte) and the "Unit" value would be 0xE121, signifying: Nibble Part Value Meaning ----- ---- ----- ------- 0 System 1 SI Linear 1 Length 2 Centimeters^2 2 Mass 1 Grams 3 Time -2 Seconds^-2 To give the resolution in e.g. hundredth of joules the "Unit Exponent" item value should have been -9. See also the examples of "Unit" values for some common units in the same chapter. However, there is a common misunderstanding about the "Unit Exponent" value encoding, where it is assumed to be stored the same as nibbles in "Unit" item. This is most likely due to the specification being a bit vague and overloading the term "unit exponent". This also was and still is proliferated by the official "HID Descriptor Tool", which makes this mistake and stores "Unit Exponent" as such. This format is also mentioned in books such as "USB Complete" and in Microsoft's hardware design guides. As a result many devices currently on the market use this encoding and so the driver should support them. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-09HID: usbhid: quirk for SiS TouchscreenAceLan Kao
BugLink: http://bugs.launchpad.net/bugs/1180881 This device needs to be added to the quirks list with HID_QUIRK_NO_INIT_REPORTS, otherwise it causes 10 seconds timeout during report initialization. [12431.828467] hid-multitouch 0003:0457:1013.0475: usb_submit_urb(ctrl) failed: -1 [12431.828507] hid-multitouch 0003:0457:1013.0475: timeout initializing reports Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-09HID: usbhid: quirk for Synaptics Large TouchccreenAceLan Kao
BugLink: http://bugs.launchpad.net/bugs/1180881 Synaptics large touchscreen doesn't support some of the report request while initializing. The unspoorted request will make the device unreachable, and will lead to the following usb_submit_urb() function call timeout. So, add the IDs into HID_QUIRK_NO_INIT_REPORTS quirk. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-07HID: wiimote: fix FF deadlockDavid Herrmann
The input core has an internal spinlock that is acquired during event injection via input_event() and friends but also held during FF callbacks. That means, there is no way to share a lock between event-injection and FF handling. Unfortunately, this is what is required for wiimote state tracking and what we do with state.lock and input->lock. This deadlock can be triggered when using continuous data reporting and FF on a wiimote device at the same time. I takes me at least 30m of stress-testing to trigger it but users reported considerably shorter times (http://bpaste.net/show/132504/) when using some gaming-console emulators. The real problem is that we have two copies of internal state, one in the wiimote objects and the other in the input device. As the input-lock is not supposed to be accessed from outside of input-core, we have no other chance than offloading FF handling into a worker. This actually works pretty nice and also allows to implictly merge fast rumble changes into a single request. Due to the 3-layered workers (rumble+queue+l2cap) this might reduce FF responsiveness. Initial tests were fine so lets fix the race first and if it turns out to be too slow we can always handle FF out-of-band and skip the queue-worker. Cc: <stable@vger.kernel.org> # 3.11+ Reported-by: Thomas Schneider Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-02HID: add Holtek USB ID 04d9:a081 SHARKOON DarkGliderAnders F. U. Kiær
Added id, bindings and comments for Holtek USB ID 04d9:a081 SHARKOON DarkGlider Gaming mouse to use the same corrections of the report descriptor as Holtek 04d9:a04a. As the mouse exceed HID_MAX_USAGES at the same offsets in the reported descriptor. Tested on the hardware. Signed-off-by: Anders F. U. Kiær <ablacksheep@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-02HID: hidraw: close underlying device at removal of last readerManoj Chourasia
Even though device exist bit is set the underlying HW device should be closed when the last reader of the device is closed i.e. open count drops to zero. Signed-off-by: Manoj Chourasia <mchourasia@nvidia.com> Reported-by: mika.westerberg@linux.intel.com Tested-by: mika.westerberg@linux.intel.com Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-30HID: roccat: Fix "cannot create duplicate filename" problemsStefan Achatz
Fixing some wrong macro stringification/concatenation. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-26HID: uhid: allocate static minorDavid Herrmann
udev has this nice feature of creating "dead" /dev/<node> device-nodes if it finds a devnode:<node> modalias. Once the node is accessed, the kernel automatically loads the module that provides the node. However, this requires udev to know the major:minor code to use for the node. This feature was introduced by: commit 578454ff7eab61d13a26b568f99a89a2c9edc881 Author: Kay Sievers <kay.sievers@vrfy.org> Date: Thu May 20 18:07:20 2010 +0200 driver core: add devname module aliases to allow module on-demand auto-loading However, uhid uses dynamic minor numbers so this doesn't actually work. We need to load uhid to know which minor it's going to use. Hence, allocate a static minor (just like uinput does) and we're good to go. Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "Fixes for CVE-2013-2897, CVE-2013-2895, CVE-2013-2897, CVE-2013-2894, CVE-2013-2893, CVE-2013-2891, CVE-2013-2890, CVE-2013-2889. All the bugs are triggerable only by specially crafted evil-on-purpose HW devices. Fixes by Kees Cook and Benjamin Tissoires" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: lenovo-tpkbd: fix leak if tpkbd_probe_tp fails HID: multitouch: validate indexes details HID: logitech-dj: validate output report details HID: validate feature and input report details HID: lenovo-tpkbd: validate output report details HID: LG: validate HID output report details HID: steelseries: validate output report details HID: sony: validate HID output report details HID: zeroplus: validate output report details HID: provide a helper for validating hid reports
2013-09-13HID: lenovo-tpkbd: fix leak if tpkbd_probe_tp failsBenjamin Tissoires
If tpkbd_probe_tp() bails out, the probe() function return an error, but hid_hw_stop() is never called. fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1003998 Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-13HID: multitouch: validate indexes detailsBenjamin Tissoires
When working on report indexes, always validate that they are in bounds. Without this, a HID device could report a malicious feature report that could trick the driver into a heap overflow: [ 634.885003] usb 1-1: New USB device found, idVendor=0596, idProduct=0500 ... [ 676.469629] BUG kmalloc-192 (Tainted: G W ): Redzone overwritten Note that we need to change the indexes from s8 to s16 as they can be between -1 and 255. CVE-2013-2897 Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-13HID: logitech-dj: validate output report detailsKees Cook
A HID device could send a malicious output report that would cause the logitech-dj HID driver to leak kernel memory contents to the device, or trigger a NULL dereference during initialization: [ 304.424553] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b ... [ 304.780467] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 [ 304.781409] IP: [<ffffffff815d50aa>] logi_dj_recv_send_report.isra.11+0x1a/0x90 CVE-2013-2895 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-13HID: validate feature and input report detailsBenjamin Tissoires
When dealing with usage_index, be sure to properly use unsigned instead of int to avoid overflows. When working on report fields, always validate that their report_counts are in bounds. Without this, a HID device could report a malicious feature report that could trick the driver into a heap overflow: [ 634.885003] usb 1-1: New USB device found, idVendor=0596, idProduct=0500 ... [ 676.469629] BUG kmalloc-192 (Tainted: G W ): Redzone overwritten CVE-2013-2897 Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-13HID: lenovo-tpkbd: validate output report detailsKees Cook
A HID device could send a malicious output report that would cause the lenovo-tpkbd HID driver to write just beyond the output report allocation during initialization, causing a heap overflow: [ 76.109807] usb 1-1: New USB device found, idVendor=17ef, idProduct=6009 ... [ 80.462540] BUG kmalloc-192 (Tainted: G W ): Redzone overwritten CVE-2013-2894 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-13HID: LG: validate HID output report detailsKees Cook
A HID device could send a malicious output report that would cause the lg, lg3, and lg4 HID drivers to write beyond the output report allocation during an event, causing a heap overflow: [ 325.245240] usb 1-1: New USB device found, idVendor=046d, idProduct=c287 ... [ 414.518960] BUG kmalloc-4096 (Not tainted): Redzone overwritten Additionally, while lg2 did correctly validate the report details, it was cleaned up and shortened. CVE-2013-2893 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-13HID: steelseries: validate output report detailsKees Cook
A HID device could send a malicious output report that would cause the steelseries HID driver to write beyond the output report allocation during initialization, causing a heap overflow: [ 167.981534] usb 1-1: New USB device found, idVendor=1038, idProduct=1410 ... [ 182.050547] BUG kmalloc-256 (Tainted: G W ): Redzone overwritten CVE-2013-2891 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-13HID: sony: validate HID output report detailsKees Cook
This driver must validate the availability of the HID output report and its size before it can write LED states via buzz_set_leds(). This stops a heap overflow that is possible if a device provides a malicious HID output report: [ 108.171280] usb 1-1: New USB device found, idVendor=054c, idProduct=0002 ... [ 117.507877] BUG kmalloc-192 (Not tainted): Redzone overwritten CVE-2013-2890 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org #3.11 Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-13HID: zeroplus: validate output report detailsKees Cook
The zeroplus HID driver was not checking the size of allocated values in fields it used. A HID device could send a malicious output report that would cause the driver to write beyond the output report allocation during initialization, causing a heap overflow: [ 1442.728680] usb 1-1: New USB device found, idVendor=0c12, idProduct=0005 ... [ 1466.243173] BUG kmalloc-192 (Tainted: G W ): Redzone overwritten CVE-2013-2889 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-13HID: provide a helper for validating hid reportsKees Cook
Many drivers need to validate the characteristics of their HID report during initialization to avoid misusing the reports. This adds a common helper to perform validation of the report exisitng, the field existing, and the expected number of values within the field. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-07Revert "Input: introduce BTN/ABS bits for drums and guitars"Linus Torvalds
This reverts commits 61e00655e9cb, 73f8645db191 and 8e22ecb603c8: "Input: introduce BTN/ABS bits for drums and guitars" "HID: wiimote: add support for Guitar-Hero drums" "HID: wiimote: add support for Guitar-Hero guitars" The extra new ABS_xx values resulted in ABS_MAX no longer being a power-of-two, which broke the comparison logic. It also caused the ioctl numbers to overflow into the next byte, causing problems for that. We'll try again for 3.13. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "Highlights: - conversion of HID subsystem to use devm-based resource management, from Benjamin Tissoires - i2c-hid support for DT bindings, from Benjamin Tissoires - much improved support for Win8-multitouch devices, from Benjamin Tissoires - cleanup of core code using common hidinput_input_event(), from David Herrmann - fix for bug in implement() access to the bit stream (causing oops) that has been present in the code for ages, but devices that are able to trigger it have started to appear only now, from Jiri Kosina - fixes for CVE-2013-2899, CVE-2013-2898, CVE-2013-2896, CVE-2013-2892, CVE-2013-2888 (all triggerable only by specially crafted malicious HW devices plugged into the system), from Kees Cook - hidraw oops fix, from Manoj Chourasia - various smaller fixes here and there, support for a bunch of new devices by various contributors" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (53 commits) HID: MAINTAINERS: add roccat drivers HID: hid-sensor-hub: change kmalloc + memcpy by kmemdup HID: hid-sensor-hub: move to devm_kzalloc HID: hid-sensor-hub: fix indentation accross the code HID: move HID_REPORT_TYPES closer to the report-definitions HID: check for NULL field when setting values HID: picolcd_core: validate output report details HID: sensor-hub: validate feature report details HID: ntrig: validate feature report details HID: pantherlord: validate output report details HID: hid-wiimote: print small buffers via %*phC HID: uhid: improve uhid example client HID: Correct the USB IDs for the new Macbook Air 6 HID: wiimote: add support for Guitar-Hero guitars HID: wiimote: add support for Guitar-Hero drums Input: introduce BTN/ABS bits for drums and guitars HID: battery: don't do DMA from stack HID: roccat: add support for KonePureOptical v2 HID: picolcd: Prevent NULL pointer dereference on _remove() HID: usbhid: quirk for N-Trig DuoSense Touch Screen ...
2013-09-06Merge branch 'for-3.12/sensor-hub' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-sensor-hub.c
2013-09-06Merge branches 'for-3.12/devm', 'for-3.12/i2c-hid', 'for-3.12/i2c-hid-dt', ↵Jiri Kosina
'for-3.12/logitech', 'for-3.12/multitouch-win8', 'for-3.12/trasnport-driver-cleanup', 'for-3.12/uhid', 'for-3.12/upstream' and 'for-3.12/wiimote' into for-linus
2013-09-04HID: hid-sensor-hub: change kmalloc + memcpy by kmemdupAndy Shevchenko
The patch substitutes kmemdup for kmalloc followed by memcpy. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04HID: hid-sensor-hub: move to devm_kzallocAndy Shevchenko
devm_kzalloc() will manage resources freeing and allows to make error path smaller and nicer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04HID: hid-sensor-hub: fix indentation accross the codeAndy Shevchenko
Patch just rearranges lines to be more compact and/or readable. Additionally it converts double space to one in several places. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04Merge branch 'for-3.11/CVE-2013-2888' into for-3.12/upstreamJiri Kosina
This one didn't make it for 3.11 due to being applied too close to release, queue it for 3.12 merge window. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04HID: check for NULL field when setting valuesKees Cook
Defensively check that the field to be worked on is not NULL. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04HID: picolcd_core: validate output report detailsKees Cook
A HID device could send a malicious output report that would cause the picolcd HID driver to trigger a NULL dereference during attr file writing. [jkosina@suse.cz: changed report->maxfield < 1 to report->maxfield != 1 as suggested by Bruno]. CVE-2013-2899 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@kernel.org Reviewed-by: Bruno Prémont <bonbons@linux-vserver.org> Acked-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04HID: sensor-hub: validate feature report detailsKees Cook
A HID device could send a malicious feature report that would cause the sensor-hub HID driver to read past the end of heap allocation, leaking kernel memory contents to the caller. CVE-2013-2898 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@kernel.org Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04HID: ntrig: validate feature report detailsKees Cook
A HID device could send a malicious feature report that would cause the ntrig HID driver to trigger a NULL dereference during initialization: [57383.031190] usb 3-1: New USB device found, idVendor=1b96, idProduct=0001 ... [57383.315193] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [57383.315308] IP: [<ffffffffa08102de>] ntrig_probe+0x25e/0x420 [hid_ntrig] CVE-2013-2896 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@kernel.org Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04HID: pantherlord: validate output report detailsKees Cook
A HID device could send a malicious output report that would cause the pantherlord HID driver to write beyond the output report allocation during initialization, causing a heap overflow: [ 310.939483] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0003 ... [ 315.980774] BUG kmalloc-192 (Tainted: G W ): Redzone overwritten CVE-2013-2892 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04HID: hid-wiimote: print small buffers via %*phCAndy Shevchenko
Instead of passing each byte through stack let's use %*phC specifier to dump buffer as a hex string. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04HID: Correct the USB IDs for the new Macbook Air 6Henrik Rydberg
A recent patch (9d9a04ee) added support for the new machine, but got the sequence of USB ids wrong. Reports from both Ian and Linus T show that the 0x0291 id is for ISO, not ANSI, which should have the missing number 0x0290. This patchs moves the three numbers accordingly, fixing the problem. Reported-and-tested-by: Ian Munsie <darkstarsword@gmail.com> Tested-by: Linus G Thiel <linus@hanssonlarsson.se> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04Merge branch 'master' into for-3.12/upstreamJiri Kosina
Sync with Linus' tree to be able to apply fixup patch on top of 9d9a04ee75 ("HID: apple: Add support for the 2013 Macbook Air") Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04HID: wiimote: add support for Guitar-Hero guitarsNicolas Adenis-Lamarre
Apart from drums, Guitar-Hero also ships with guitars. Use the recently introduced input ABS/BTN-bits to report this to user-space. Devices are reported as "Nintendo Wii Remote Guitar". If I ever get my hands on "RockBand" guitars, I will try to report them via the same interface so user-space does not have to bother which device it deals with. Signed-off-by: Nicolas.Adenis-Lamarre <nicolas.adenis.lamarre@gmail.com> (add commit-msg and adjust to new BTN_* IDs) Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04HID: wiimote: add support for Guitar-Hero drumsDavid Herrmann
Guitar-Hero comes with a drums extension. Use the newly introduced input drums-bits to report this back to user-space. This is a usual extension like any other device. Nothing special to take care of. We report this to user-space as "Nintendo Wii Remote Drums". There are other drums (like "RockBand" drums) which we currently do not support and maybe will at some point. However, it is quite likely that we can report these via the same interface. This allows user-space to work with them without knowing the exact branding. I couldn't find anyone who owns a "RockBand" device, though. Initial-work-by: Nicolas Adenis-Lamarre <nicolas.adenis.lamarre@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-03Merge tag 'driver-core-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ...
2013-09-02HID: battery: don't do DMA from stackJiri Kosina
Instead of using data from stack for DMA in hidinput_get_battery_property(), allocate the buffer dynamically. Cc: stable@kernel.org Reported-by: Richard Ryniker <ryniker@alum.mit.edu> Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-02HID: roccat: add support for KonePureOptical v2Stefan Achatz
KonePureOptical is a KonePure with different sensor. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-02HID: picolcd: Prevent NULL pointer dereference on _remove()Bruno Prémont
When picolcd is switched into bootloader mode (for FW flashing) make sure not to try to dereference NULL-pointers of feature-devices during unplug/unbind. This fixes following BUG: BUG: unable to handle kernel NULL pointer dereference at 00000298 IP: [<f811f56b>] picolcd_exit_framebuffer+0x1b/0x80 [hid_picolcd] *pde = 00000000 Oops: 0000 [#1] Modules linked in: hid_picolcd syscopyarea sysfillrect sysimgblt fb_sys_fops CPU: 0 PID: 15 Comm: khubd Not tainted 3.11.0-rc7-00002-g50d62d4 #2 EIP: 0060:[<f811f56b>] EFLAGS: 00010292 CPU: 0 EIP is at picolcd_exit_framebuffer+0x1b/0x80 [hid_picolcd] Call Trace: [<f811d1ab>] picolcd_remove+0xcb/0x120 [hid_picolcd] [<c1469b09>] hid_device_remove+0x59/0xc0 [<c13464ca>] __device_release_driver+0x5a/0xb0 [<c134653f>] device_release_driver+0x1f/0x30 [<c134603d>] bus_remove_device+0x9d/0xd0 [<c13439a5>] device_del+0xd5/0x150 [<c14696a4>] hid_destroy_device+0x24/0x60 [<c1474cbb>] usbhid_disconnect+0x1b/0x40 ... Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Cc: stable@kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-02HID: usbhid: quirk for N-Trig DuoSense Touch ScreenVasily Titskiy
The DuoSense touchscreen device causes a 10 second timeout. This fix removes the delay. Signed-off-by: Vasily Titskiy <qehgt0@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-02HID: uhid: add devname module aliasMarcel Holtmann
For simple device node creation, add the devname module alias. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-29HID: validate HID report id sizeKees Cook
The "Report ID" field of a HID report is used to build indexes of reports. The kernel's index of these is limited to 256 entries, so any malicious device that sets a Report ID greater than 255 will trigger memory corruption on the host: [ 1347.156239] BUG: unable to handle kernel paging request at ffff88094958a878 [ 1347.156261] IP: [<ffffffff813e4da0>] hid_register_report+0x2a/0x8b CVE-2013-2888 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-27HID: do not init input reports for Win 8 multitouch devicesBenjamin Tissoires
Some multitouch screens do not like to be polled for input reports. However, the Win8 spec says that all touches should be sent during each report, making the initialization of reports unnecessary. The Win7 spec is less precise, so do not use this for those devices. Add the quirk HID_QUIRK_NO_INIT_INPUT_REPORTS so that we do not have to introduce a quirk for each problematic device. This quirk makes the driver behave the same way the Win 8 does. It actually retrieves the features, but not the inputs. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Srinivas Pandruvada<srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-27HID: detect Win 8 multitouch devices in coreBenjamin Tissoires
Detecting Win 8 multitouch devices in core allows us to set quirks before the device is parsed through hid_hw_start(). It also simplifies the detection of those devices in hid-multitouch and makes the handling of those devices cleaner. As Win 8 multitouch panels are in the group multitouch and rely on a special feature to be detected, this patch adds a bitfield in the parser. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Srinivas Pandruvada<srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-27HID: Use hid_parser for pre-scanning the report descriptorsBenjamin Tissoires
The Win 8 detection is sufficiently complex to warrant use of the full parser code, in spite of the inferred memory usage. Therefore, we can use the existing HID parser in hid-core for hid_scan_report() by re-using the code from hid_open_report(). hid_parser_global, hid_parser_local and hid_parser_reserved does not have any side effects. We just need to reimplement the MAIN_ITEM callback to have a proper parsing without side effects. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Srinivas Pandruvada<srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-26HID: hidraw: Add spinlock in struct hidraw to protect listYonghua Zheng
It is unsafe to call list_for_each_entry in hidraw_report_event to traverse each hidraw_list node without a lock protection, the list could be modified if someone calls hidraw_release and list_del to remove itself from the list, this can cause hidraw_report_event to touch a deleted list struct and panic. To prevent this, introduce a spinlock in struct hidraw to protect list from concurrent access. Signed-off-by: Yonghua Zheng <younghua.zheng@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v0.10.2 at 2024-11-18 05:41:51 (GMT)