summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)Author
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits) Input: wacom - specify Cinitq supported tools Input: ab8500-ponkey - fix IRQ freeing in error path Input: adp5588-keys - use more obvious i2c_device_id name string Input: ad7877 - switch to using threaded IRQ Input: ad7877 - use attribute group to control visibility of attributes Input: serio - add support for PS2Mult multiplexer protocol Input: wacom - properly enable runtime PM Input: ad7877 - filter events where pressure is beyond the maximum Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting Input: ad7877 - implement specified chip select behavior Input: hp680_ts_input - use cancel_delayed_work_sync() Input: mousedev - correct lockdep annotation Input: ads7846 - switch to using threaded IRQ Input: serio - support multiple child devices per single parent Input: synaptics - simplify pass-through port handling Input: add ROHM BU21013 touch panel controller support Input: omap4-keypad - wake-up on events & long presses Input: omap4-keypad - fix interrupt line configuration Input: omap4-keypad - SYSCONFIG register configuration Input: omap4-keypad - use platform device helpers ...
2010-10-23HID: fix mismerge in hid-lgJiri Kosina
Fix wrong merge in hid-lg -- report fixup functions now get pointer to rdesc. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-23Merge branch 'waltop' into for-linusJiri Kosina
2010-10-23Merge branch 'uc-logic' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-ids.h drivers/hid/hid-lg.c drivers/hid/usbhid/hid-quirks.c
2010-10-23Merge branches '3m', 'egalax', 'logitech', 'magicmouse', 'ntrig' and ↵Jiri Kosina
'roccat' into for-linus
2010-10-23Merge branches 'upstream' and 'upstream-fixes' into for-linusJiri Kosina
2010-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits) USB: mct_u232: fix broken close USB: gadget: amd5536udc.c: fix error path USB: imx21-hcd - fix off by one resource size calculation usb: gadget: fix Kconfig warning usb: r8a66597-udc: Add processing when USB was removed. mxc_udc: add workaround for ENGcm09152 for i.MX35 USB: ftdi_sio: add device ids for ScienceScope USB: musb: AM35x: Workaround for fifo read issue USB: musb: add musb support for AM35x USB: AM35x: Add musb support usb: Fix linker errors with CONFIG_PM=n USB: ohci-sh - use resource_size instead of defining its own resource_len macro USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro USB: xhci: Fix compile error when CONFIG_PM=n USB: accept some invalid ep0-maxpacket values USB: xHCI: PCI power management implementation USB: xHCI: bus power management implementation USB: xHCI: port remote wakeup implementation USB: xHCI: port power management implementation ... Manually fix up (non-data) conflict: the SCSI merge gad renamed the 'hw_sector_size' member to 'physical_block_size', and the USB tree brought a new use of it.
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-22USB: add driver for Meywa-Denki & Kayac YUREXTomoki Sekiyama
Meywa-Denki/Kayac YUREX is a leg-shakes sensor device. See http://bbu.kayac.com/en/about/ for further information. This driver support read/write the leg-shakes counter in the device via a device file /dev/yurex[0-9]*. [minor coding style cleanups fixed by gregkh] Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-20HID: hidraw: fix window in hidraw_releaseJiri Slaby
There is a window between hidraw_table check and its dereference. In that window, the device may be unplugged and removed form the system and we will then dereference NULL. Lock that place properly so that either we get NULL and jump out or we can work with real pointer. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-20HID: hid-sony: override usbhid_output_raw_report for SixaxisAntonio Ospite
Override usbhid_output_raw_report in order to force output reports (sent via hidraw_write, for instance) on the control endpoint. The Sony Sixaxis (PS3 Controller) accepts output reports only on the control endpoint, it silently discards them when they arrive over the interrupt endpoint where usbhid would normally deliver them. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-15HID: add absolute axis resolution calculationNikolai Kondrashov
Add absolute axis resolution calculation to the core HID layer, according to HID specification v1.11 6.2.2.7 Global Items. Only exponent 1 length units for X/Y/Z/RX/RY/RZ axis are supported for now. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-10-13HID: Add Cando touch screen 15.6-inch product idFrançois Jaouen
This add the product id of the touch screen found on ACER Aspire 5738PZ. Works with hid-cando driver. Signed-off-by: Francois Jaouen<francois.jaouen@laposte.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-12HID: Add MULTI_INPUT quirk for turbox/mosart touchscreenPierre BAILLY
This device generates ABS_Z and ABS_RX events, while it should be generating ABS_X and ABS_Y instead. Using the MULTI_INPUT quirk solves this issue. Reference: https://bugs.launchpad.net/ubuntu/+bug/620609/ Signed-off-by: Pierre BAILLY <pierre@substantiel.fr> Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-06HID: hidraw, fix a NULL pointer dereference in hidraw_writeAntonio Ospite
BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffffa0f0a625>] hidraw_write+0x3b/0x116 [hid] [...] This is reproducible by disconnecting the device while userspace writes to dev node in a loop and doesn't check return values in order to exit the loop. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Cc: stable@kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-06HID: hidraw, fix a NULL pointer dereference in hidraw_ioctlAntonio Ospite
BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffffa02c66b4>] hidraw_ioctl+0xfc/0x32c [hid] [...] This is reproducible by disconnecting the device while userspace does ioctl in a loop and doesn't check return values in order to exit the loop. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Cc: stable@kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-04HID: force feedback support for Logitech RumblePad gamepadHendrik Iben
This patch adds force feedback support for Logitech WingMan RumblePad gamepads by extending the Logitech Rumblepad 2 force feedback code. Signed-off-by: Hendrik Iben <Hendrik_Iben@web.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01HID: support STmicroelectronics and Sitronix with hid-stantuml driverPascal Auriel - Stantum
New VendorsIds/ProductIds using hid-stantum driver. Signed-off-by: Stantum <software@stantum.com> Acked-by: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01HID: magicmouse: Adjust major / minor axes to scaleHenrik Rydberg
By visual inspection, the reported touch_major and touch_minor axes are roughly a factor of four too small. The factor is approximate, since the protocol is not known and the HID report encodes touch size with fewer bits than positions. This patch scales the reported values by a factor of four. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01HID: Fix for problems with eGalax/DWAV multi-touch-screenPhilipp Merkel
This patch fixes three problems with the eGalax/DWAV multi-touch screen found in the Eee PC T101MT: 1) While there is a dedicated multitouch driver for the screen (hid-egalax.c), the MULTI_INPUT quirk is also applied, preventing the hid-egalax driver from working. This patch removes the quirk so the hid-egalax driver can handle the device correctly. 2) The x and y coordinates sent by the screen in multi-touch mode are shifted by three bits from the events sent in single-touch mode, thus the coordinates are out of range, leading to the pointer being stuck in the bottom-right corner if no additional calibration is applied (e.g. in the X evdev driver). This patch shifts the coordinates back. This does not decrease accuracy as the last three bits of the "wrong" coordinates are always 0. 3) Only multi-touch pressure events are sent, single touch emulation is missing pressure information. This patch adds single-touch ABS_PRESSURE events. Signed-off-by: Philipp Merkel <mail@philmerk.de> Acked-by: Stéphane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01HID: waltop: add support for Waltop Slim Tablet 12.1 inchNikolai Kondrashov
Add support for Waltop Slim Tablet 12.1 inch by fixing its report descriptor. This mainly fixes button reporting. This tablet is also sold as Genius G-Pen F610. Other possible names of this tablet: VisTablet Original 12", Adesso CyberTablet Z12, Adesso CT-Z12A, PenPower Tooya Pro, Aiptek Slim 12.1 Inch Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-01HID: add NOGET quirk for AXIS 295 Video Surveillance JoystickRok Mandeljc
This patch adds the NOGET quirk for AXIS 295 Video Surveillance Joystick (despite AXIS brand the vendor is actually CH Products). Without the quirk, the joystick is detected but does not generate any events. Signed-off-by: Rok Mandeljc <rok.mandeljc@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-24HID: usbhid: remove unused hiddev_driverAlan Stern
Now that hiddev_driver isn't being used for anything, there's no reason to keep it around. This patch (as1419) gets rid of it entirely. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-24Merge branch 'master' into upstreamJiri Kosina
2010-09-24HID: magicmouse: Use hid-input parsing rather than bypassing itMichael Poole
Let the HID core handle input device setup and HID-compliant reports. This driver then only has to worry about the non-standard reports. Signed-off-by: Michael Poole <mdpoole@troilus.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-22HID: trivial formatting fixAlan Ott
Added blank line after declarations. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-22HID: Add support for Logitech Speed Force Wireless gaming wheelSimon Wood
The following patch adds support for the Logitech Speed Force Wireless gaming wheel. Originally designed for the WII console. Details on the protocol: http://wiibrew.org/wiki/Logitech_USB_steering_wheel This patch relies on previous patch: "Don't Send Feature Reports on Interrupt Endpoint" Logitech as produce a very similar wheel for the PS2/PS3, it is expected that this patch could also support the PS2/PS3 wheel if the USB ID's are added and (if required) the HID descriptor is modified. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-22HID: don't Send Feature Reports on Interrupt EndpointAlan Ott
Feature reports should only be sent on the control endpoint. The USB HID standard is unclear and confusing on this issue. It seems to suggest that Feature reports can be sent on a HID device's Interrupt OUT endpoint. This cannot be the case because the report type is not encoded in transfers sent out the Interrput OUT endpoint. If Feature reports were sent on the Interrupt OUT endpint, they would be indistinguishable from Output reports in the case where Report IDs were not used. Further, Windows and Mac OS X do not send Feature reports out the interrupt OUT Endpoint. They will only go out the Control Endpoint. In addition, many devices simply do not hande Feature reports sent out the Interrupt OUT endpoint. Reported-by: simon@mungewell.org Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-22HID: 3m: Adjust major / minor axes to scaleHenrik Rydberg
By visual inspection, the reported touch_major and touch_minor axes are a factor of two too large. Presumably the device actually reports the width_major and width_minor, which are generally about a factor of two larger than the touches themselves. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21HID: 3m: Correct touchscreen emulationHenrik Rydberg
The current code sometimes misses to report the last BTN_TOUCH event when multiple fingers are lifted simultaneously. With the introduction of MT slots, the tracking id is available to determine the oldest active contact. Use this information to simplify and correct the touchscreen emulation logic. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Stéphane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21HID: 3m: Convert to MT slotsHenrik Rydberg
The Microtouch controller is capable of doing finger tracking on up to 60 fingers. To reduce bandwidth and cpu usage, convert the driver to use the MT slots protocol. On Stephane's suggestion, also insert the additional copyright lines. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21HID: 3m: Output proper orientation rangeHenrik Rydberg
The range of orientation values for height/width devices should be [0, 1], but is currently set to [1, 1]. Having min == max also breaks uinput device setup. Fixed with this patch. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21HID: 3m: Adjust to sequential MT HID protocolHenrik Rydberg
The multitouch extensions to the HID protocol allows for contact data to be sent over several reports, which is also the case for the 3M M2256PW touchscreen. This patch modifies the logic to only synchronize the input layer when all contacts have been received. Consequentially, the full 60-finger capacity of the device is enabled. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-21HID: Add a hid quirk for input sync overrideHenrik Rydberg
As of lately, HID devices which send per-frame data split over several HID reports have started to emerge. This patch adds a quirk which allows the HID driver to take over the input layer synchronization, and hence the control of the frame boundary. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-17HID: fix A4Tech RP-649 horizontal scrollwheelLech Perczak
Enable fix for their horizontal scroll wheel behaviour, associate it with B8 hack. Signed-off-by: Lech Perczak <lech.perczak@multivision.pl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-16Input: hid-input - allow mapping unknown usagesDmitry Torokhov
Currently HID layer only allows to remap keycodes for known usages, and responds with -EINVAL when user tries to map new usage code. This precludes us form relying on udev/keymap for establishing correct mappings and forces us to write dummy HID drivers responsible only for setting up keymaps. Let's allow remapping not only usages that have been set up as keys (usage->type == EV_KEY) but also yet-unmapped usages (usage->type == 0). Acked-by: Jarod Wilson <jarod@redhat.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-14HID: fix hiddev's use of usb_find_interfaceGuillaume Chazarain
My macbook infrared remote control was broken by commit bd25f4dd6972755579d0ea50d1a5ace2e9b00d1a ("HID: hiddev: use usb_find_interface, get rid of BKL"). This device appears in dmesg as: apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0 It stopped working as lircd was getting ENODEV when opening /dev/usb/hiddev0. AFAICS hiddev_driver is a dummy driver so usb_find_interface(&hiddev_driver) does not find anything. The device is associated with the usbhid driver, so let's do usb_find_interface(&hid_driver) instead. $ ls -l /sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/usb/hiddev0/device/driver lrwxrwxrwx 1 root root 0 2010-09-12 16:28 /sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/usb/hiddev0/device/driver -> ../../../../../../bus/usb/drivers/usbhid Signed-off-by: Guillaume Chazarain <guichaz@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-10Input: hid-input - switch to using new keycode interfaceDmitry Torokhov
Switch HID code to use new style of getkeycode and setkeycode methods to allow retrieving and setting keycodes not only by their scancodes but also by index. Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-08HID: fixup blacklist entry for Asus T91MTJiri Kosina
The device is handled by hid-mosart driver, and therefore should be present in hid_blacklist[], not hid_ignore_list[]. Cc: Stephane Chatty <chatty@lii-enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-08HID: add device ID for new Asus Multitouch ControllerRoland Baum
The following patch instructs usbhid/hid-mosart to handle a new multitouch controller, built-in by some Asus EeePC T101MT models. Signed-off-by: Roland Baum <rba@tr33.de> Tested-by: Roland Baum <rba@tr33.de> Acked-by: Stéphane Chatty <chatty@enac.fr> CC: Stéphane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-08HID: debugfs: wake up reading tasks upon eventChase Douglas
Some devices poke the hid core in a way that causes hid_debug_event to be called, while never calling hid_dump_input. Without this wakeup addition, tasks reading for hid events through debugfs may never see any events. It may be that a well written driver doesn't cause this, but then what's the point of debugfs? Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-08HID: ntrig: identify firmware versionRafi Rubin
This adds firmware version polling to the end of probe and reports the version both in the raw form and proccessed to match the formatting used by N-Trig. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03HID: magicmouse: enable Magic Trackpad supportChase Douglas
The trackpad speaks a similar, but different, protocol from the magic mouse. However, only small code tweaks here and there are needed to make basic multitouch work. Extra logic is required for single-touch emulation of the touchpad. The changes made here take the approach that only one finger may emulate the single pointer when multiple fingers have touched the screen. Once that finger is raised, all touches must be raised before any further single touch events can be sent. Sometimes the magic trackpad sends two distinct touch reports as one big report. Simply splitting the packet in two and resending them through magicmouse_raw_event ensures they are handled properly. I also added myself to the copyright statement. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03HID: magicmouse: simplify touch data bit manipulationChase Douglas
The new format should be easier to read to determine which bits correspond to which data. It also brings all the manipulation logic to the top of the function. This makes size and orientation reading more clear. Note that the impetus for this change is the forthcoming support for the Magic Trackpad, which has a different touch data protocol. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03HID: magicmouse: simplify multitouch feature requestChase Douglas
Only the first feature request is required to put the Magic Mouse into multitouch mode. This is also the case for the Magic Trackpad, for which support will be added in a later commit. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03HID: add no-get quirk for eGalax touch controllerJohan Hovold
Add no-get quirk for eGalax touch controller to avoid timeout at probe. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-02HID: magicmouse: remove timestamp logicChase Douglas
The timestamps from the device are currently stored in the private data structure. These aren't used, so remove them. I've left a comment detailing the protocol for future reference. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-02HID: magicmouse: simplify touch down logicChase Douglas
For the MT protocol, we need to properly keep track of each down touch. This change simplifies the logic, and should make things easier when support for the Magic Trackpad is added. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-02HID: sony: Apply sixaxis quirks only to sixaxisAntonio Ospite
Be more explicit and avoid calling sony_set_operational_usb() when we have USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE. While at it, rename the sony_set_operational routines to sixaxis_set_operational as they are sixaxis specific. This is also in preparation for the sysfs interface to set and get bdaddr over usb and for some other Sixaxis report fixup. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>