summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)Author
2011-09-16Merge branch 'for-linus' of git://github.com/dtor/inputLinus Torvalds
* 'for-linus' of git://github.com/dtor/input: Input: wacom - fix touch parsing on newer Bamboos Input: bcm5974 - add MacBookAir4,1 trackpad support Input: wacom - add POINTER and DIRECT device properties Input: adp5588-keys - remove incorrect modalias Input: cm109 - fix checking return value of usb_control_msg Input: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartner Input: wacom - remove pressure for touch devices
2011-09-08Input: wacom - add POINTER and DIRECT device propertiesJason Gerecke
Adds INPUT_PROP_POINTER or INPUT_PROP_DIRECT as necessary to the hardware supported by the Wacom driver. The DIRECT property is assigned to devices with an embedded screen (i.e. touchscreens and display tablets). The POINTER property is assigned to those without embedded screens. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-07Merge branches 'upstream-fixes' and 'magicmouse' into for-linusJiri Kosina
2011-09-07HID: wacom: Unregister sysfs attributes on removeDavid Herrmann
HID devices can be hotplugged so we should unregister all sysfs attributes when removing a driver. Otherwise, manually unloading the wacom-driver will not remove the sysfs attributes. Only when the device is disconnected, they are removed, eventually. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07HID: wacom: Fix error path of power-supply initializationDavid Herrmann
power_supply_unregister() must not be called if power_supply_register() failed. The wdata->psy.dev pointer may point to invalid memory after a failed power_supply_register() and hence wacom_remove() will fail while calling power_supply_unregister(). This changes the wacom_probe function to fail if it cannot register the power_supply devices. If we would want to keep the previous behaviour we had to keep some flag about the power_supply state and check it on wacom_remove, but this seems inappropriate here. Hence, we simply fail, too, if power_supply_register fails. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-25HID: add support for HuiJia USB Gamepad connectorClemens Werther
Create each gamepad as a separate joystick Signed-off-by: Clemens Werther <clemens.werther@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-25HID: magicmouse: ignore 'ivalid report id' while switching modes, v2Jiri Kosina
This is basically a more generic respin of 23746a6 ("HID: magicmouse: ignore 'ivalid report id' while switching modes") which got reverted later by c3a492. It turns out that on some configurations, this is actually still the case and we are not able to detect in runtime. The device reponds with 'invalid report id' when feature report switching it into multitouch mode is sent to it. This has been silently ignored before 0825411ade ("HID: bt: Wait for ACK on Sent Reports"), but since this commit, it propagates -EIO from the _raw callback . So let the driver ignore -EIO as response to 0xd7,0x01 report, as that's how the device reacts in normal mode. Sad, but following reality. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=35022 Reported-by: Chase Douglas <chase.douglas@canonical.com> Reported-by: Jaikumar Ganesh <jaikumarg@android.com> Tested-by: Chase Douglas <chase.douglas@canonical.com> Tested-by: Jaikumar Ganesh <jaikumarg@android.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-24Merge branches 'wiimote' and 'upstream-fixes' into for-linusJiri Kosina
2011-08-23HID: wiimote: Add status and return request handlersDavid Herrmann
The wiimote resets the current drm when an extension is plugged in. Fortunately, it also sends a status report in this situation so we just reset the drm on every status report to keep the drm consistent. Also handle return reports from the wiimote which indicate success and failure of requests that we've sent. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-23HID: wiimote: Add drm requestDavid Herrmann
The wiimote reports data in several data reporting modes (DRM). The DRM request makes the wiimote send data in the requested drm. The DRM mode can be set explicitely or can be chosen by the driver. To let the driver choose the DRM mode, pass WIIPROTO_REQ_NULL placeholder to it. This is no valid request and is replaced with an appropriate DRM. Currently, the driver always sets the basic DRM_K mode, but this will be extended when further peripherals like accelerometer and IR are supported. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-23HID: wiimote: Register led class devicesDavid Herrmann
This registers 4 led devices to allow controlling the wiimote leds via standard LED sysfs API. It removes the four sysfs attributes so we don't have two APIs for one device. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-23HID: wiimote: Correctly call HID open/close callbacksDavid Herrmann
Even though the bluetooth hid backend does not react on open/close callbacks, we should call them to be consistent with other hid drivers. Also the new input open/close handlers will be used in future to prepare the wiimote device for IR/extension input. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-23HID: wiimote: Simplify synchronizationDavid Herrmann
The new locking scheme in HID core allows us to remove a bit of synchronization. Since the HID layer acts synchronously we simply register input core last and there are no synchonization issues anymore. Also register sysfs files after that to simplify the code. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-23HID: usbhid: Add support for SiGma Micro chipJeremiah Matthey
Patch to add SiGma Micro-based keyboards (1c4f:0002) to hid-quirks. These keyboards dont seem to allow the records to be initialized, and hence a timeout occurs when the usbhid driver attempts to initialize them. The patch just adds the signature for these keyboards to the hid-quirks list with the setting HID_QUIRK_NO_INIT_REPORTS. This removes the 5-10 second wait for the timeout to occur. Signed-off-by: Jeremiah Matthey <sprg86@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-10HID: magicmouse: Set resolution of touch surfacesChase Douglas
Add touch surface resolution information. The size of the touch surfaces has been determined to the hundredth of a mm. Cc: Jiri Kosina <jkosina@suse.cz> Cc: Michael Poole <mdpoole@troilus.org> Cc: linux-input@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Chase Douglas <chase.douglas@canonical.com> [jkosina@suse.cz: update comments and commit message] Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-01HID: add support for new revision of Apple aluminum keyboardDan Bastone
Add USB device ids for the new revision (MB110LL/B) of Apple's wired aluminum keyboard. I have only confirmed that the ANSI version is correct - it is assumed that the ISO and JIS versions follow the standard numbering convention. Signed-off-by: Dan Bastone <dan@pwienterprises.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-22Merge branches 'roccat', 'upstream' and 'wiimote' into for-linusJiri Kosina
2011-07-22HID: fix support for Microsoft comfort mouse 4500Jiri Kosina
Add forgotten entry into the global blacklist. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-21HID: hid-multitouch: add one new multitouch device's VID/PIDice chien
This patch adds support for the CSR panel built by XAT. Signed-off-by: Ice Chien <ice.chien@accupoint.com.tw> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-21HID: prodikeys: remove a redundant forward declaration of struct pcmidi_sndAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-21HID: prodikeys: make needlessly global symbols staticAxel Lin
The following symbols are not referenced outside this file so there's no need for it to be in the global name space. pcmidi_sustained_note_release init_sustain_timers stop_sustain_timers pcmidi_handle_report pcmidi_setup_extra_keys pcmidi_snd_initialise pcmidi_snd_terminate Make them static. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-20HID: emsff: properly handle emsff_init failureAxel Lin
emsff_init() may fail, let's properly handle the failure. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-14HID: ACRUX - add missing hid_hw_stop() in ax_probe() error pathAxel Lin
hid_hw_stop() must be called in ax_probe() error path if hid_hw_start() was successful. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-12HID: fix horizontal wheel for ms comfort mouse 4500Ari Savolainen
Microsoft comfort mouse 4500 report descriptor contains duplicate usages for horizontal wheel. This patch fixes the wrong mapping caused by that. Signed-off-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: uclogic: Add support for UC-Logic WP1062Nikolai Kondrashov
Add support for UC-Logic Tablet WP1062 by fixing its report descriptor. This tablet is sold as Monoprice 10X6.25 Inches Graphic Drawing Tablet. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add sysfs support to wiimote driverDavid Herrmann
Add sysfs files for each led of the wiimote. Writing 1 to the file enables the led and 0 disables the led. We do not need memory barriers when checking wdata->ready since we use a spinlock directly after it. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Cache wiimote led stateDavid Herrmann
Save the current state of the leds in the wiimote data structure. This allows us to discard new led requests that wouldn't change anything. Protect the whole state structure by a spinlock. Every wiiproto_* function expects this spinlock to be held when called. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote led requestDavid Herrmann
Add new request that sets the leds on the target device. Also, per default, set led1 after initializing a device. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote input button parserDavid Herrmann
Parse input report 0x30 from the wiimote as button input. We need to send events for all buttons on every input report because the wiimote does not send events for single buttons but always for all buttons to us. The input layer, however, filters redundant events. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote event handlerDavid Herrmann
Create array of all event handlers and call each handler when we receive the related event. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add output queue for wiimote driverDavid Herrmann
The raw hid output function that is supported by bluetooth low-level hid driver does not provide an output queue and also may sleep. The wiimote driver, though, may need to send data in atomic context so this patch adds a buffered output queue for the wiimote driver. We use the shared workqueue to send our buffer to the hid device. There is always only one active worker which flushes the whole output queue to the device. If our queue is full, every further output is discarded. Special care is needed in the deinitialization routine. When wiimote_hid_remove is called, HID input is already disabled, but HID output may still be used from our worker and is then discarded by the lower HID layers. Therefore, we can safely disable the input layer since it is the only layer that still sends input events. Future sysfs attributes must be freed before unregistering input to avoid the sysfs handlers to send input events to a non-existing input layer. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote send functionDavid Herrmann
The wiimote driver needs to send raw output reports to the wiimote device. Otherwise we could not manage the peripherals of the wiimote or perform memory operations on the wiimote. We cannot use hidinput_input_event of the lowlevel hid driver, since this does not accept raw input. Therefore, we need to use the same function that hidraw uses to send output. Side effect is, the raw output function is not buffered and can sleep. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Synchronize wiimote input and hid event handlingDavid Herrmann
The wiimote first starts HID hardware and then registers the input device. We need to synchronize the startup so no event handler will start parsing events when the wiimote device is not ready, yet. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Register input device in wiimote hid driverDavid Herrmann
Register input device so the wiimote can report input events on it. We do not use HIDINPUT because the wiimote does not provide any descriptor table which might be used by HIDINPUT. So we avoid having HIDINPUT parse the wiimote descriptor and create unrelated or unknown event flags. Instead we register our own input device that we have full control of. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote device structureDavid Herrmann
Allocate wiimote device structure with all wiimote related data when registering new wiimote devices. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Register wiimote hid driver stubDavid Herrmann
The wiimote uses a fake HID protocol. Hence, we need to prevent HIDINPUT and HIDDEV from parsing wiimote data and instead parse raw hid events. Add VID/PID to hid-core so the special driver is loaded on new wiimotes. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add Nintendo Wii Remote driver stubDavid Herrmann
Add stub driver for the Nintendo Wii Remote. The wii remote uses the HID protocol to communicate with the host over bluetooth. Hence, add dependency for HIDP and place driver in hid subsystem. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-27HID: add FF support for Holtek On Line Grip based gamepadsAnssi Hannula
Add force feedback support for Holtek On Line Grip based HID devices. The protocol is more complex than that of most other rumblepads, but the device still needs to be handled as a memoryless one. Tested by Cleber de Mattos Casali with a 1241:5015 "Clone Joypad Super Power Fire" gamepad, with help from Hendrik Iben <hendrik_iben@web.de>. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Cleber de Mattos Casali <clebercasali@yahoo.com.br> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-24HID: hid-multitouch: add support for a new Lumio dual-touch panelBenjamin Tissoires
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-24HID: hid-multitouch: correct VID for Stantum panelsBenjamin Tissoires
while merging hid-stantum into hid-multitouch, I did not correctly copy/paste the VIDs for those devices. This patch fixes it. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-24HID: hid-multitouch: ensure slots are initializedBenjamin Tissoires
In case a device does not provide the feature "Maximum Contact Count", or set it at 0, the maxcontacts field may be at 0 while calling input_mt_init_slots. This patch ensures that hid-multitouch will allways report ABS_MT_SLOT and ABS_MT_TRACKING_ID to the user space. This corrects a bug found with some Ilitek devices that has been integrated in 3.0-rc0. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-16Revert "HID: magicmouse: ignore 'ivalid report id' while switching modes"Jiri Kosina
This reverts commit 23746a66d7d9e73402c68ef00d708796b97ebd72. It turned out that the actual reason for failure is not the device firmware, but bug in Bluetooth stack, which will be fixed by patch by Ville Tervo which corrects the mask handling for CSR 1.1 Dongles. Reported-and-tested-by: Ed Tomlinson <edt@aei.ca> Reported-and-tested-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-14HID: add support for MS Digital Media 3000Jiri Kosina
The Digital Media 3000 keyboard (USB id: 0x0730) features the same 1-5 Application Launch keys that the Natural Ergonomic 4000 has. Add its usb id to the list of quirks. Reported-by: Khelben Blackstaff <eye.of.the.8eholder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13HID: hid-sony: fix endiannes of Sixaxis accel/gyro valuesSimon Wood
The accelerometers/gyro on the Sixaxis are reported in the wrong endianness (ie. not compatible with HID), so this patch intercepts the report and swaps the appropriate bytes over. Accelerometers are scaled with a nominal value of +/-4000 = 1G, maximum value would be around +/-32768 = 8G. Gyro on my device always reports -32768, might need some calibration set within the controller. Fix extracted from previous patch submission: https://patchwork.kernel.org/patch/95212/ Signed-off-by: Marcin Tolysz <tolysz@gmail.com> Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13HID: hid-sony: amend Sixaxis descriptor to enable accelerometersSimon Wood
Modify the HID descriptor of the Sixaxis controller to allow the reporting of the accelerometers and gyro via a joystick axis. Rewrite section from offset 83: -- 0x75, 0x08, /* Report Size (8), */ /* all the other data lumped together */ 0x95, 0x27, /* Report Count (39), */ 0x09, 0x01, /* Usage (Pointer), */ 0x81, 0x02, /* Input (Variable), */ 0x75, 0x08, /* Report Size (8), */ 0x95, 0x30, /* Report Count (48), */ 0x09, 0x01, /* Usage (Pointer), */ /* Note Output */ 0x91, 0x02, /* Output (Variable), */ 0x75, 0x08, /* Report Size (8), */ 0x95, 0x30, /* Report Count (48), */ 0x09, 0x01, /* Usage (Pointer), */ /* Note Feature */ 0xB1, 0x02, /* Feature (Variable), */ -- with -- /* last 2 not used... */ 0x95, 0x13, /* Report Count (19), */ 0x09, 0x01, /* Usage (Pointer), */ 0x81, 0x02, /* Input (Variable), */ /* Padding */ 0x95, 0x0C, /* Report Count (12), */ 0x81, 0x01, /* Input (Constant), */ 0x75, 0x10, /* Report Size (16), */ 0x95, 0x04, /* Report Count (4), */ 0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ 0x46, 0xFF, 0x03, /* Physical Maximum (1023), */ 0x09, 0x01, /* Usage (Pointer), */ 0x81, 0x02, /* Input (Variable), */ -- Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13HID: roccat: fix NULL pointer dereference, add range checksStefan Achatz
On rare occassions raw events can be triggered before drvdata gets set up which leads to NULL pointer dereferences. This was only observed with pyra on 2.6.39, but is fixed for all devices now to play it save. kovaplus returned wrong actual values when profile change was initiated from host. Added range checks for setting actual profile on all devices. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13HID: roccat: correction and cleanup of HID feature reportsStefan Achatz
Removed analog feature report enums and modified code in roccat_common to reflect this. Non standard conform Kone got its own copy of the old code. That helps extracting more generalizations for newer devices. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13HID: roccat: chang Kconfig menu to submenu for roccat devicesStefan Achatz
As module roccat is needed by all devices, it's the toplevel menu entry with all devices dependent. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-13HID: roccat: Add "Roccat Talk" support for koneplusStefan Achatz
Added binary sysfs attribute to support new functionality the manufacturer added to koneplus. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-12HID: hid-multitouch: fix broken eGalaxBenjamin Tissoires
Since the inclusion of eGalax devices in 2.6.39, I've got some bug reports for 480d and other devices. The problem lies in the reports descriptors: eGalax supports both pen and fingers, and so the reports descriptors contained both. But hid-multitouch relies on them to detect the last item in each field to send the multitouch events. In 480d, the last item is not Y as it should but Pressure. That means that the fields are not aligned and X,Y are at 0,0 (the other touch coordinates of the report). With this patch, the detection is made only when the field ContactID has been detected inside the collection. There is still a problem with the detections of the range as stylus and fingers may not have the same min/max, but it's a start. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>