summaryrefslogtreecommitdiff
path: root/drivers/ide
AgeCommit message (Collapse)Author
2008-12-22drivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL testJulia Lawall
In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-09[IA64] Clear up section mismatch for ioc4_ide_attach_one.Robin Holt
The generic_defconfig has three section mismatches. This clears up ioc4_ide_attach_one(). Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Mike Reid <mdr@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-12-08ide: build-fix for CONFIG_BLK_DEV_IDEDMA_PMAC=nBartlomiej Zolnierkiewicz
IDE pmac host driver build fails with CONFIG_BLK_DEV_IDEDMA_PMAC=n as reported by Kamalesh: > drivers/ide/pmac.c: In function 'pmac_ide_set_pio_mode': > drivers/ide/pmac.c:527: error: implicit declaration of function 'kauai_lookup_timing' > drivers/ide/pmac.c:527: error: 'shasta_pio_timings' undeclared (first use in this function) > drivers/ide/pmac.c:527: error: (Each undeclared identifier is reported only once > drivers/ide/pmac.c:527: error: for each function it appears in.) > drivers/ide/pmac.c:534: error: 'kauai_pio_timings' undeclared (first use in this function) > drivers/ide/pmac.c: In function 'pmac_ide_do_resume': > drivers/ide/pmac.c:914: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function) > drivers/ide/pmac.c: At top level: > drivers/ide/pmac.c:1007: error: 'pmac_ide_init_dma' undeclared here (not in a function) > drivers/ide/pmac.c: In function 'pmac_ide_setup_device': > drivers/ide/pmac.c:1107: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function) > drivers/ide/pmac.c: In function 'pmac_ide_macio_attach': > drivers/ide/pmac.c:1209: error: 'pmac_ide_hwif_t' has no member named 'dma_regs' > drivers/ide/pmac.c:1210: error: 'pmac_ide_hwif_t' has no member named 'dma_regs' > make[2]: *** [drivers/ide/pmac.o] Error 1 Fix it by removing the superfluous config option. Reported-and-tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-08Revert "ide: respect current DMA setting during resume"Bartlomiej Zolnierkiewicz
This reverts commit e9eb8388306364295308132265c00bea685f409f since it could break resume (thanks to Paul Collins for the report). I'll look into sorting this out properly for 2.6.29 but for 2.6.28 it is the best to just revert my patch. Reported-by: Paul Collins <paul@burly.ondioline.org> Cc: rjw@sisk.pl Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02alim15x3: fix sparse warningHannes Eder
Fix this sparse warning: drivers/ide/alim15x3.c:594:2: warning: returning void-valued expression Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02ide: remove dead code from drive_is_ready()Bartlomiej Zolnierkiewicz
We guarantee 400ns delay at the time of issuing the command. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02ide: fix build for DEBUG_PMBartlomiej Zolnierkiewicz
Also while at it: * Drop unused arguments from ide_complete_power_step(). * Move DEBUG_PM printk() from ide_end_drive_cmd() to ide_complete_power_step(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02ide: respect current DMA setting during resumeBartlomiej Zolnierkiewicz
Respect current DMA setting during resume, otherwise PIO timings may get destroyed if host uses shared PIO/MWDMA timings. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02ide: add SAMSUNG SP0822N with firmware WA100-10 to ivb_list[]Bartlomiej Zolnierkiewicz
Should fix kernel.org bug #10225: http://bugzilla.kernel.org/show_bug.cgi?id=10225 Reported-by: Matthias B. <haferfrost@web.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sergei Shtyltov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02amd74xx: workaround unreliable AltStatus register for nVidia controllersBartlomiej Zolnierkiewicz
It seems that on some nVidia controllers using AltStatus register can be unreliable so default to Status register if the PCI device is in Compatibility Mode. In order to achieve this: * Add ide_pci_is_in_compatibility_mode() inline helper to <linux/ide.h>. * Add IDE_HFLAG_BROKEN_ALTSTATUS host flag and set it in amd74xx host driver for nVidia controllers in Compatibility Mode. * Teach actual_try_to_identify() and drive_is_ready() about the new flag. This fixes the regression caused by removal of CONFIG_IDEPCI_SHARE_IRQ config option in 2.6.25 and using AltStatus register unconditionally when available (kernel.org bugs #11659 and #10216). [ Moreover for CONFIG_IDEPCI_SHARE_IRQ=y (which is what most people and distributions use) it never worked correctly. ] Thanks to Remy LABENE and Lars Winterfeld for help with debugging the problem. More info at: http://bugzilla.kernel.org/show_bug.cgi?id=11659 http://bugzilla.kernel.org/show_bug.cgi?id=10216 Reported-by: Remy LABENE <remy.labene@free.fr> Tested-by: Remy LABENE <remy.labene@free.fr> Tested-by: Lars Winterfeld <lars.winterfeld@tu-ilmenau.de> Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02ide: fix the ide_release_lock imbalanceMichael Schmitz
ide_release_lock() spits out lots of: ide_release_lock: bug warnings on Atari Falcon. Fix the ide_release_lock imbalance. Signed-off-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-30icside section warningsAl Viro
icside_register_v[56] is called from (__devinit) icside_probe Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: ensure correct logging in do_io_probe pcmcia: add another pata/ide ID pcmcia: add braces in error path pcmcia: struct device - replace bus_id with dev_name(), dev_set_name() pcmcia: setup resource information for pseudo multifunction devices. pcmcia: fix indentation & braces disagreement - add braces
2008-11-09pcmcia: add another pata/ide IDMarc Pignat
Support for Apacer photo steno pro card. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> CC: Alan Cox <alan@lxorguk.ukuu.org.uk CC: linux-ide@vger.kernel.org
2008-11-02ide-gd: re-get capacity on revalidateBorislav Petkov
We need to re-get a removable media's capacity when revalidating the disk so that its partitions get rescanned by the block layer. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: axboe@kernel.dk Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02tx4938ide: Avoid underflow on calculation of a wait cycleAtsushi Nemoto
Make 'wt' variable signed while it can be negative during calculation. Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: sshtylyov@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02tx4938ide: Do not call devm_ioremap for whole 128KBAtsushi Nemoto
Call devm_ioremap() for CS0 and CS1 separetely. And some style cleanups. Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: ralf@linux-mips.org Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02tx4938ide: Check minimum cycle time and SHWT range (v2)Atsushi Nemoto
SHWT value is used as address valid to -CSx assertion and -CSx to -DIOx assertion setup time, and contrarywise, -DIOx to -CSx release and -CSx release to address invalid hold time, so it actualy applies 4 times and so constitutes -DIOx recovery time. Check requirement of the recovery time and cycle time. Also check SHWT maximum value. Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: ralf@linux-mips.org Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02ide: Switch to a common addressAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02ide-cd: fix DMA alignment regressionBorislav Petkov
e5318b531b008c79d2a0c0df06a7b8628da38e2f ("ide: use the dma safe check for REQ_TYPE_ATA_PC") introduced a regression which caused some ATAPI drives to turn off DMA for REQ_TYPE_BLOCK_PC commands while burning and thus degrading performance and ultimately causing an excessive amount of underruns. The issue is documented also in: http://bugzilla.kernel.org/show_bug.cgi?id=11742. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: Valerio Passini <valerio.passini@unicam.it> [bart: fixup patch description per comments from Sergei Shtylyov] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-26arm ide breakageAl Viro
a) semicolon before the function body is a bad idea b) it's const struct foo, not struct const foo c) incidentally, it's ecard_remove_driver(), not ecard_unregister_driver() d) compiling is occasionally useful. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23ide: drivers/ide/generic.c -> drivers/ide/ide-pci-generic.cBartlomiej Zolnierkiewicz
Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide-disk: set non-rotational queue flag for SSD and CF devicesBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide-cd: add TEAC CD-224E to the NO_AUTOCLOSE listMárton Németh
The "TEAC CD-ROM CD-224E" cannot close its tray, so add it to the NO_AUTOCLOSE list. This will correct the "Can close tray" field of /proc/sys/dev/cdrom/info. Signed-off-by: Márton Németh <nm127@freemail.hu> Acked-by: Borislav Petkov <petkovbb@gmail.com> [bart: minor fixups to patch description] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide: Add tx4938ide driver (v2)Atsushi Nemoto
This is the driver for the Toshiba TX4938 SoC EBUS controller ATA mode. It has custom set_pio_mode and some hacks for big endian. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: ralf@linux-mips.org Cc: sshtylyov@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide: Add tx4939ide driver (v6)Atsushi Nemoto
This is the driver for the Toshiba TX4939 SoC ATA controller. This controller has standard ATA taskfile registers and DMA command/status registers, but the register layout is swapped on big endian. There are some other endian issue and some special registers which requires many custom dma_ops/tp_ops routines and build_dmatable. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: ralf@linux-mips.org Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide: two more pci_ioremap_bar() conversionsArjan van de Ven
based on suggestion from Sergei Shtylyov, there are two more places where using pci_ioremap_bar() makes sense. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23pci: use pci_ioremap_bar() in drivers/ideArjan van de Ven
Use the newly introduced pci_ioremap_bar() function in drivers/ide. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23sgiioc4: use ide_host_add() (take 2)Sergei Shtylyov
Convert the driver to use ide_host_add() -- this seems to be a straightforward change which I'm not sure why hasn't been done yet... While doing this at last, get rid of: - useless local copy of the 'sgiioc4_port_info' variable; - unnecessary 'goto' and label... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23sgiioc4: fix error cleanup path (take 2)Sergei Shtylyov
The driver "forgot" to call iounmap() iff request_mem_region() call failed in sgiioc4_ide_setup_pci_device()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdevLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev: (66 commits) [PATCH] kill the rest of struct file propagation in block ioctls [PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET [PATCH] get rid of blkdev_locked_ioctl() [PATCH] get rid of blkdev_driver_ioctl() [PATCH] sanitize blkdev_get() and friends [PATCH] remember mode of reiserfs journal [PATCH] propagate mode through swsusp_close() [PATCH] propagate mode through open_bdev_excl/close_bdev_excl [PATCH] pass fmode_t to blkdev_put() [PATCH] kill the unused bsize on the send side of /dev/loop [PATCH] trim file propagation in block/compat_ioctl.c [PATCH] end of methods switch: remove the old ones [PATCH] switch sr [PATCH] switch sd [PATCH] switch ide-scsi [PATCH] switch tape_block [PATCH] switch dcssblk [PATCH] switch dasd [PATCH] switch mtd_blkdevs [PATCH] switch mmc ...
2008-10-21ide: remove useless subdirs from drivers/ide/Bartlomiej Zolnierkiewicz
Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-21[PATCH] switch ide-tapeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch ide-gdAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch ide-cdAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] beginning of methods conversionAl Viro
To keep the size of changesets sane we split the switch by drivers; to keep the damn thing bisectable we do the following: 1) rename the affected methods, add ones with correct prototypes, make (few) callers handle both. That's this changeset. 2) for each driver convert to new methods. *ALL* drivers are converted in this series. 3) kill the old (renamed) methods. Note that it _is_ a flagday; all in-tree drivers are converted and by the end of this series no trace of old methods remain. The only reason why we do that this way is to keep the damn thing bisectable and allow per-driver debugging if anything goes wrong. New methods: open(bdev, mode) release(disk, mode) ioctl(bdev, mode, cmd, arg) /* Called without BKL */ compat_ioctl(bdev, mode, cmd, arg) locked_ioctl(bdev, mode, cmd, arg) /* Called with BKL, legacy */ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch ide_disk_ops ->ioctl() to sane prototypeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch cdrom_{open,release,ioctl} to sane APIsAl Viro
... convert to it in callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] lose the unused file argument in generic_ide_ioctl()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch scsi_cmd_ioctl() to passing fmode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] eliminate use of ->f_flags in block methodsAl Viro
store needed information in f_mode Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] introduce fmode_t, do annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (36 commits) ide: re-add TRM290 fix lost during ide_build_dmatable() cleanup scc_pata: kill unused variables sgiioc4: kill duplicate ioremap() sgiioc4: kill useless address checks delkin_cb: add PM support ide: remove broken hpt34x driver ide-floppy: remove idefloppy_floppy_t typedef sgiioc4: remove maskproc() method hpt366: cleanup maskproc() method ide: mask interrupt in ide_config_drive_speed() hpt366: fix compile warning ide: remove unused macros from <asm-parisc/ide.h> ide: remove M68K_IDE_SWAPW define from <asm-m68k/ide.h> ide: remove dead <asm-arm/arch-sa1100/ide.h> ide: fix support for IDE PCI controllers using MMIO on frv ide-cd: remove stale comment ide-cd: small drive type print fix ide-cd: debug log enhancements ide: add generic ATA/ATAPI disk driver ide: allow device drivers to specify per-device type /proc settings ...
2008-10-17ide: re-add TRM290 fix lost during ide_build_dmatable() cleanupBartlomiej Zolnierkiewicz
commit 14c123f37187aba0b4e0e893a969efc6820c4170 ("ide: cleanup ide_build_dmatable()") accidentally reverted TRM290 fix introduced by commit 22e05b4549bf2405d6aca128540b20cd2dd33f1f ("ide-dma: fix ide_build_dmatable() for TRM290"). Reported-by: Sergei Shtylylov <sshtylyov@ru.mvista.com> Acked-by: Sergei Shtylylov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17scc_pata: kill unused variablesSergei Shtylyov
Fix the "unused variable" warning in init_hwif_scc() caused by the commit 48c3c1072651922ed153bcf0a33ea82cf20df390 (ide: add struct ide_host (take 3)). Moreover, remove the write-only variable 'dma_status_port' in init_setup_scc() about which gcc gives no warning and which has been there from the very start... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17sgiioc4: kill duplicate ioremap()Sergei Shtylyov
By the time ide_dma_sgiioc4() gets called, sgiioc4_ide_setup_pci_device() will have called ioremap() on the whole BAR0 region, so calling ioremap() on the DMA registers means wasting a page. Replace this call by a mere address calculation, based on the fact that IRQ registers (pointed to by 'hwif->io_ports.irq_addr') are situated at offset 0 from BAR0. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17sgiioc4: kill useless address checksSergei Shtylyov
The driver performs a number of checks on the virtual/physical addresses which would always evaluate as true (except ide_dma_sgiioc4() -- always false): - for sgiioc4_init_hwif_ports(), its caller, sgiioc4_ide_setup_pci_device(), guarantees that 'ctrl_port' and 'irq_port' parameters are never 0; - in sgiioc4_read_status(), we always read the IDE status register, so there's no need to check the register's address (must be a leftover from the times when this function implemented the INB() method); - in ide_dma_sgiioc4(), 'dma_base' can never be 0 as IOC4_DMA_OFFSET is not 0. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17delkin_cb: add PM supportBartlomiej Zolnierkiewicz
* Factor out chipset initialization code from delkin_cb_probe() to delkin_cb_init_chipset(). * Assign ->init_chipset in struct delkin_cb_port_info. * Add delkin_cb_{suspend,resume}() (->suspend/->resume methods). Fixes kernel bugzilla bug #11735: http://bugzilla.kernel.org/show_bug.cgi?id=11735 Tested-by: bumble.bee@xs4all.nl Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide: remove broken hpt34x driverBartlomiej Zolnierkiewicz
No big loss since HPT343/363 controllers are properly supported by pata_hpt3x3 driver from Alan Cox. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide-floppy: remove idefloppy_floppy_t typedefBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>