summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2015-02-13infiniband: Mellanox IB driver patch use _nort() primitivesSven-Thorsten Dietrich
Fixes in_atomic stack-dump, when Mellanox module is loaded into the RT Kernel. Michael S. Tsirkin <mst@dev.mellanox.co.il> sayeth: "Basically, if you just make spin_lock_irqsave (and spin_lock_irq) not disable interrupts for non-raw spinlocks, I think all of infiniband will be fine without changes." Signed-off-by: Sven-Thorsten Dietrich <sven@thebigcorporation.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-02-13Reset to 3.12.37Scott Wood
2014-05-14infiniband: Mellanox IB driver patch use _nort() primitivesSven-Thorsten Dietrich
Fixes in_atomic stack-dump, when Mellanox module is loaded into the RT Kernel. Michael S. Tsirkin <mst@dev.mellanox.co.il> sayeth: "Basically, if you just make spin_lock_irqsave (and spin_lock_irq) not disable interrupts for non-raw spinlocks, I think all of infiniband will be fine without changes." Signed-off-by: Sven-Thorsten Dietrich <sven@thebigcorporation.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-14Reset to 3.12.19Scott Wood
2014-04-10infiniband: Mellanox IB driver patch use _nort() primitivesSven-Thorsten Dietrich
Fixes in_atomic stack-dump, when Mellanox module is loaded into the RT Kernel. Michael S. Tsirkin <mst@dev.mellanox.co.il> sayeth: "Basically, if you just make spin_lock_irqsave (and spin_lock_irq) not disable interrupts for non-raw spinlocks, I think all of infiniband will be fine without changes." Signed-off-by: Sven-Thorsten Dietrich <sven@thebigcorporation.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-22iser-target: Fix post_send_buf_count for RDMA READ/WRITENicholas Bellinger
commit b6b87a1df604678ed1be40158080db012a99ccca upstream. This patch fixes the incorrect setting of ->post_send_buf_count related to RDMA WRITEs + READs where isert_rdma_rw->send_wr_num was not being taken into account. This includes incrementing ->post_send_buf_count within isert_put_datain() + isert_get_dataout(), decrementing within __isert_send_completion() + isert_response_completion(), and clearing wr->send_wr_num within isert_completion_rdma_read() This is necessary because even though IB_SEND_SIGNALED is not set for RDMA WRITEs + READs, during a QP failure event the work requests will be returned with exception status from the TX completion queue. Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22iser-target: Ignore completions for FRWRs in isert_cq_tx_workNicholas Bellinger
commit 9bb4ca68fc48eea618b1af1c1cde2a251ae32d1b upstream. This patch changes IB_WR_FAST_REG_MR + IB_WR_LOCAL_INV related work requests to include a ISER_FRWR_LI_WRID value in order to signal isert_cq_tx_work() that these requests should be ignored. This is necessary because even though IB_SEND_SIGNALED is not set for either work request, during a QP failure event the work requests will be returned with exception status from the TX completion queue. v2 changes: - Rename ISER_FRWR_LI_WRID -> ISER_FASTREG_LI_WRID (Sagi) Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22iscsi/iser-target: Fix isert_conn->state hung shutdown issuesNicholas Bellinger
commit defd884845297fd5690594bfe89656b01f16d87e upstream. This patch addresses a couple of different hug shutdown issues related to wait_event() + isert_conn->state. First, it changes isert_conn->conn_wait + isert_conn->conn_wait_comp_err from waitqueues to completions, and sets ISER_CONN_TERMINATING from within isert_disconnect_work(). Second, it splits isert_free_conn() into isert_wait_conn() that is called earlier in iscsit_close_connection() to ensure that all outstanding commands have completed before continuing. Finally, it breaks isert_cq_comp_err() into seperate TX / RX related code, and adds logic in isert_cq_rx_comp_err() to wait for outstanding commands to complete before setting ISER_CONN_DOWN and calling complete(&isert_conn->conn_wait_comp_err). Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-22iscsi/iser-target: Use list_del_init for ->i_conn_nodeNicholas Bellinger
commit 5159d763f60af693a3fcec45dce2021f66e528a4 upstream. There are a handful of uses of list_empty() for cmd->i_conn_node within iser-target code that expect to return false once a cmd has been removed from the per connect list. This patch changes all uses of list_del -> list_del_init in order to ensure that list_empty() returns false as expected. Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-22IB/qib: Add missing serdes init sequenceMike Marciniszyn
commit 2f75e12c4457a9b3d042c0a0d748fa198dc2ffaf upstream. Research has shown that commit a77fcf895046 ("IB/qib: Use a single txselect module parameter for serdes tuning") missed a key serdes init sequence. This patch add that sequence. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13IB/qib: Fix QP check when looping back to/from QP1Ira Weiny
commit 6e0ea9e6cbcead7fa8c76e3e3b9de4a50c5131c5 upstream. The GSI QP type is compatible with and should be allowed to send data to/from any UD QP. This was found when testing ibacm on the same node as an SA. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09iser-target: Move INIT_WORK setup into isert_create_device_ib_resNicholas Bellinger
commit 2853c2b6671509591be09213954d7249ca6ff224 upstream. This patch moves INIT_WORK setup for cq_desc->cq_[rx,tx]_work into isert_create_device_ib_res(), instead of being done each callback invocation in isert_cq_[rx,tx]_callback(). This also fixes a 'INFO: trying to register non-static key' warning when cancel_work_sync() is called before INIT_WORK has setup the struct work_struct. Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09iser-target: fix error return code in isert_create_device_ib_res()Wei Yongjun
commit 94a7111043d99819cd0a72d9b3174c7054adb2a0 upstream. Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ib_isert: Avoid duplicate iscsit_increment_maxcmdsn callNicholas Bellinger
commit 04d9cd1224e5bc9d6146bab2866cdc81deb9b509 upstream. This patch avoids a duplicate iscsit_increment_maxcmdsn() call for ISER_IB_RDMA_WRITE within isert_map_rdma() + isert_reg_rdma_frwr(), which will already be occuring once during isert_put_datain() -> iscsit_build_rsp_pdu() operation. It also removes the local conn->stat_sn assignment + increment, and changes the third parameter to iscsit_build_rsp_pdu() to signal this should be done by iscsi_target_mode code. Tested-by: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04iser-target: Avoid using FRMR for single dma entry requestsVu Pham
commit f01b9f73392b48c6cda7c2c66594c73137c776da upstream. This patch changes isert_reg_rdma_frwr() to not use FRMR for single dma entry requests from small I/Os, in order to avoid the associated memory registration overhead. Using DMA MR is sufficient here for the single dma entry requests, and addresses a >= v3.12 performance regression. Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04IB/srp: Report receive errors correctlyBart Van Assche
commit cd4e38542a5c2cab94e5410fb17c1cc004a60792 upstream. The IB spec does not guarantee that the opcode is available in error completions. Hence do not rely on it. See also commit 948d1e889e5b ("IB/srp: Introduce srp_handle_qp_err()"). Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04IB/srp: Avoid offlining operational SCSI devicesBart Van Assche
commit 99b6697a50c2acbe3ca2772d359fc9a28835dc84 upstream. If SCSI commands are submitted with a SCSI request timeout that is lower than the the IB RC timeout, it can happen that the SCSI error handler has already started device recovery before transport layer error handling starts. So it can happen that the SCSI error handler tries to abort a SCSI command after it has been reset by srp_rport_reconnect(). Tell the SCSI error handler that such commands have finished and that it is not necessary to continue its recovery strategy for commands that have been reset by srp_rport_reconnect(). Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04IB/srp: Remove target from list before freeing Scsi_Host structureVu Pham
commit 65d7dd2f3479ef5aec1d9ddd1481cb7851c11af6 upstream. Remove an SRP target from the SRP target list before invoking the last scsi_host_put() call. This change is necessary because that last put frees the memory that holds the srp_target_port structure. This patch prevents the following kernel oops: RIP: 0010:[<ffffffff810b00d0>] __lock_acquire+0x500/0x1570 Call Trace: [<ffffffff810b11e4>] lock_acquire+0xa4/0x120 [<ffffffff81531206>] _spin_lock+0x36/0x70 [<ffffffffa01b6d8f>] srp_remove_work+0xef/0x180 [ib_srp] [<ffffffff8109125c>] worker_thread+0x21c/0x3d0 [<ffffffff81096e86>] kthread+0x96/0xa0 [<ffffffff8100c20a>] child_rip+0xa/0x20 Signed-off-by: Vu Pham <vuhuong@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ bvanassche - Modified path description and CC'ed stable. ] Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-04IB/qib: Fix txselect regressionMike Marciniszyn
commit 2fadd83184d58701f1116ca578465b5a75f9417c upstream. Commit 7fac33014f54("IB/qib: checkpatch fixes") was overzealous in removing a simple_strtoul for a parse routine, setup_txselect(). That routine is required to handle a multi-value string. Unwind that aspect of the fix. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04IB/qib: Convert qib_user_sdma_pin_pages() to use get_user_pages_fast()Jan Kara
commit 603e7729920e42b3c2f4dbfab9eef4878cb6e8fa upstream. qib_user_sdma_queue_pkts() gets called with mmap_sem held for writing. Except for get_user_pages() deep down in qib_user_sdma_pin_pages() we don't seem to need mmap_sem at all. Even more interestingly the function qib_user_sdma_queue_pkts() (and also qib_user_sdma_coalesce() called somewhat later) call copy_from_user() which can hit a page fault and we deadlock on trying to get mmap_sem when handling that fault. So just make qib_user_sdma_pin_pages() use get_user_pages_fast() and leave mmap_sem locking for mm. This deadlock has actually been observed in the wild when the node is under memory pressure. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04IB/ipath: Convert ipath_user_sdma_pin_pages() to use get_user_pages_fast()Jan Kara
commit 4adcf7fb6783e354aab38824d803fa8c4f8e8a27 upstream. ipath_user_sdma_queue_pkts() gets called with mmap_sem held for writing. Except for get_user_pages() deep down in ipath_user_sdma_pin_pages() we don't seem to need mmap_sem at all. Even more interestingly the function ipath_user_sdma_queue_pkts() (and also ipath_user_sdma_coalesce() called somewhat later) call copy_from_user() which can hit a page fault and we deadlock on trying to get mmap_sem when handling that fault. So just make ipath_user_sdma_pin_pages() use get_user_pages_fast() and leave mmap_sem locking for mm. This deadlock has actually been observed in the wild when the node is under memory pressure. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> [ Merged in fix for call to get_user_pages_fast from Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target pending fixes for v3.12-rc7. This includes a number of EXTENDED_COPY related fixes as a result of Thomas and Doug's continuing testing and feedback. Also included is an important vhost/scsi fix that addresses a long standing issue where the 'write' parameter for get_user_pages_fast() was incorrectly set for virtio-scsi WRITEs -> DMA_TO_DEVICE, and not for virtio-scsi READs -> DMA_FROM_DEVICE. This resulted in random userspace segfaults and other unpleasantness on KVM host, and unfortunately has been an issue since the initial merge of vhost/scsi in v3.6. This patch is CC'ed to stable, along with two other less critical items" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: vhost/scsi: Fix incorrect usage of get_user_pages_fast write parameter target/pscsi: fix return value check target: Fail XCOPY for non matching source + destination block_size target: Generate failure for XCOPY I/O with non-zero scsi_status target: Add missing XCOPY I/O operation sense_buffer iser-target: check device before dereferencing its variable target: Return an error for WRITE SAME with ANCHOR==1 target: Fix assignment of LUN in tracepoints target: Reject EXTENDED_COPY when emulate_3pc is disabled target: Allow non zero ListID in EXTENDED_COPY parameter list target: Make target_do_xcopy failures return INVALID_PARAMETER_LIST
2013-10-24iser-target: check device before dereferencing its variableVu Pham
This patch changes isert_connect_release() to correctly check for the existence struct isert_device *device before checking for isert_device->use_frwr. Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-21IB/core: Temporarily disable create_flow/destroy_flow uverbsYann Droneaud
The create_flow/destroy_flow uverbs and the associated extensions to the user-kernel verbs ABI are under review and are too experimental to freeze at this point. So userspace is not exposed to experimental features and an uinstable ABI, temporarily disable this for v3.12 (with a Kconfig option behind staging to reenable it if desired). The feature will be enabled after proper cleanup for v3.13. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1381351016.git.ydroneaud@opteya.com Link: http://marc.info/?i=cover.1381177342.git.ydroneaud@opteya.com [ Add a Kconfig option to reenable these verbs. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-15Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Last batch of IB changes for 3.12: many mlx5 hardware driver fixes plus one trivial semicolon cleanup" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB: Remove unnecessary semicolons IB/mlx5: Ensure proper synchronization accessing memory IB/mlx5: Fix alignment of reg umr gather buffers IB/mlx5: Fix eq names to display nicely in /proc/interrupts mlx5: Fix error code translation from firmware to driver IB/mlx5: Fix opt param mask according to firmware spec mlx5: Fix opt param mask for sq err to rts transition IB/mlx5: Disable atomic operations mlx5: Fix layout of struct mlx5_init_seg mlx5: Keep polling to reclaim pages while any returned IB/mlx5: Avoid async events on invalid port number IB/mlx5: Decrease memory consumption of mr caches mlx5: Remove checksum on command interface commands IB/mlx5: Fix memory leak in mlx5_ib_create_srq IB/mlx5: Flush cache workqueue before destroying it IB/mlx5: Fix send work queue size calculation
2013-10-14Merge branch 'misc' into for-nextRoland Dreier
2013-10-14IB: Remove unnecessary semicolonsJoe Perches
These aren't necessary after switch blocks. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Ensure proper synchronization accessing memoryEli Cohen
Call mlx5_ib_populate_pas() before mapping the DMA buffer to ensure the hardware reads the values written by the CPU. Found by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix alignment of reg umr gather buffersEli Cohen
The hardware requires that gather buffers for UMR work requests be aligned to 2K. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix eq names to display nicely in /proc/interruptsSagi Grimberg
It's helpful for a driver to put the pci slot name in its interrupt names, so /proc/interrupts will show the pci slot of the device. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix opt param mask according to firmware specEli Cohen
Failed to configure opt mask to configure rre from init to rtr. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10mlx5: Fix opt param mask for sq err to rts transitionEli Cohen
Add missing entry in the table for UC transport. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Disable atomic operationsEli Cohen
Currently Atomic operations don't work properly. Disable them for the time being. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Avoid async events on invalid port numberEli Cohen
On a single ported Connect-IB, its possible for the firmware to issue events on the non-existing 2nd port. Make sure to ignore events generated for such ports. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Decrease memory consumption of mr cachesEli Cohen
Change the logic so we do not allocate memory nor map the device before actually posting to the REG_UMR QP. In addition, unmap and free the memory after we get completion. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix memory leak in mlx5_ib_create_srqMoshe Lazer
The patch fixes the rollback in case of failure in creating SRQ. Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Flush cache workqueue before destroying itMoshe Lazer
Destroying the workqueue without flushing it first can lead to a case in which the kernel tries to push a delayed work to the workqueue which does not exist anymore. Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix send work queue size calculationEli Cohen
1. Make sure wqe_cnt does not exceed the limit published by firmware. 2. There is no requirement that the number of outstanding work requests will be a power of two. Remove the ilog2 in the calculation of sq.max_post to fix that. 3. Add case for IB_QPT_XRC_TGT in sq_overhead and return 0 as XRC target QPs do not have a send queue. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-03ib_srpt: always set response for task managementJack Wang
The SRP specification requires: "Response data shall be provided in any SRP_RSP response that is sent in response to an SRP_TSK_MGMT request (see 6.7). The information in the RSP_CODE field (see table 24) shall indicate the completion status of the task management function." So fix this to avoid the SRP initiator interprets task management functions that succeeded as failed. Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com> Cc: stable@vger.kernel.org # 3.3+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-02ib_srpt: Destroy cm_id before destroying QP.Nicholas Bellinger
This patch fixes a bug where ib_destroy_cm_id() was incorrectly being called after srpt_destroy_ch_ib() had destroyed the active QP. This would result in the following failed SRP_LOGIN_REQ messages: Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1762bd, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c903009f8f41) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1758f9, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c903009f8f42) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff175941, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c90300a3cfb2) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9 rejected SRP_LOGIN_REQ because creating a new RDMA channel failed. Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9 rejected SRP_LOGIN_REQ because creating a new RDMA channel failed. Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) Reported-by: Navin Ahuja <navin.ahuja@saratoga-speed.com> Cc: stable@vger.kernel.org # 3.3+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-12Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Lots of activity again this round for I/O performance optimizations (per-cpu IDA pre-allocation for vhost + iscsi/target), and the addition of new fabric independent features to target-core (COMPARE_AND_WRITE + EXTENDED_COPY). The main highlights include: - Support for iscsi-target login multiplexing across individual network portals - Generic Per-cpu IDA logic (kent + akpm + clameter) - Conversion of vhost to use per-cpu IDA pre-allocation for descriptors, SGLs and userspace page pointer list - Conversion of iscsi-target + iser-target to use per-cpu IDA pre-allocation for descriptors - Add support for generic COMPARE_AND_WRITE (AtomicTestandSet) emulation for virtual backend drivers - Add support for generic EXTENDED_COPY (CopyOffload) emulation for virtual backend drivers. - Add support for fast memory registration mode to iser-target (Vu) The patches to add COMPARE_AND_WRITE and EXTENDED_COPY support are of particular significance, which make us the first and only open source target to support the full set of VAAI primitives. Currently Linux clients are lacking upstream support to actually utilize these primitives. However, with server side support now in place for folks like MKP + ZAB working on the client, this logic once reserved for the highest end of storage arrays, can now be run in VMs on their laptops" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (50 commits) target/iscsi: Bump versions to v4.1.0 target: Update copyright ownership/year information to 2013 iscsi-target: Bump default TCP listen backlog to 256 target: Fix >= v3.9+ regression in PR APTPL + ALUA metadata write-out iscsi-target; Bump default CmdSN Depth to 64 iscsi-target: Remove unnecessary wait_for_completion in iscsi_get_thread_set iscsi-target: Add thread_set->ts_activate_sem + use common deallocate iscsi-target: Fix race with thread_pre_handler flush_signals + ISCSI_THREAD_SET_DIE target: remove unused including <linux/version.h> iser-target: introduce fast memory registration mode (FRWR) iser-target: generalize rdma memory registration and cleanup iser-target: move rdma wr processing to a shared function target: Enable global EXTENDED_COPY setup/release target: Add Third Party Copy (3PC) bit in INQUIRY response target: Enable EXTENDED_COPY setup in spc_parse_cdb target: Add support for EXTENDED_COPY copy offload emulation target: Avoid non-existent tg_pt_gp_mem in target_alua_state_check target: Add global device list for EXTENDED_COPY target: Make helpers non static for EXTENDED_COPY command setup target: Make spc_parse_naa_6h_vendor_specific non static ...
2013-09-11target: Update copyright ownership/year information to 2013Nicholas Bellinger
Update copyright ownership/year information for target-core, loopback, iscsi-target, tcm_qla2xx, vhost and iser-target. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10iser-target: introduce fast memory registration mode (FRWR)Vu Pham
This model was introduced in 00f7ec36c "RDMA/core: Add memory management extensions support" and works when the IB device supports the IB_DEVICE_MEM_MGT_EXTENSIONS capability. Upon creating the isert device, ib_isert will test whether the HCA supports FRWR. If supported then set the flag and assign function pointers that handle fast registration and deregistration of appropriate resources (fast_reg descriptors). When new connection coming in, ib_isert will check frwr flag and create frwr resouces, if fail to do it will switch back to old model of using global dma key and turn off the frwr support. Registration is done using posting IB_WR_FAST_REG_MR to the QP and invalidations using posting IB_WR_LOCAL_INV. Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10iser-target: generalize rdma memory registration and cleanupVu Pham
Current driver uses global dma key to register the memory pointed by sg list provided by the target core. This is the preparation step for adding more methods like fast path memory registration, make the reg/unreg calls be function pointers. Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10iser-target: move rdma wr processing to a shared functionVu Pham
isert_put_datain() and isert_get_dataout() share a lot of code in rdma wr processing, move this common code to a shared function. Use isert_unmap_cmd to cleanup for RDMA_READ completion. Remove duplicate field in isert_cmd and isert_rdma_wr structs Change misc debug messages to track isert_cmd Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-09iscsi/iser-target: Convert to command priv_size usageNicholas Bellinger
This command converts iscsi/isert-target to use allocations based on iscsit_transport->priv_size within iscsit_allocate_cmd(), instead of using an embedded isert_cmd->iscsi_cmd. This includes removing iscsit_transport->alloc_cmd() usage, along with updating isert-target code to use iscsit_priv_cmd(). Also, remove left-over iscsit_transport->release_cmd() usage for direct calls to iscsit_release_cmd(), and drop the now unused lio_cmd_cache and isert_cmd_cache. Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-09iser-target: Updates for login negotiation multi-plexing supportNicholas Bellinger
This patch updates iser-target code to support login negotiation multi-plexing. This includes only using isert_conn->conn_login_comp for the first login request PDU, pushing the subsequent processing to iscsi_conn->login_work -> iscsi_target_do_login_rx(), and turning isert_get_login_rx() into a NOP. v3 changes: - Drop unnecessary LOGIN_FLAGS_READ_ACTIVE bit set in isert_rx_login_req() Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "The usual trivial updates all over the tree -- mostly typo fixes and documentation updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits) doc: Documentation/cputopology.txt fix typo treewide: Convert retrun typos to return Fix comment typo for init_cma_reserved_pageblock Documentation/trace: Correcting and extending tracepoint documentation mm/hotplug: fix a typo in Documentation/memory-hotplug.txt power: Documentation: Update s2ram link doc: fix a typo in Documentation/00-INDEX Documentation/printk-formats.txt: No casts needed for u64/s64 doc: Fix typo "is is" in Documentations treewide: Fix printks with 0x%# zram: doc fixes Documentation/kmemcheck: update kmemcheck documentation doc: documentation/hwspinlock.txt fix typo PM / Hibernate: add section for resume options doc: filesystems : Fix typo in Documentations/filesystems scsi/megaraid fixed several typos in comments ppc: init_32: Fix error typo "CONFIG_START_KERNEL" treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks page_isolation: Fix a comment typo in test_pages_isolated() doc: fix a typo about irq affinity ...
2013-09-05Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull main batch of InfiniBand/RDMA changes from Roland Dreier: - Large ocrdma HW driver update: add "fast register" work requests, fixes, cleanups - Add receive flow steering support for raw QPs - Fix IPoIB neighbour race that leads to crash - iSER updates including support for using "fast register" memory registration - IPv6 support for iWARP - XRC transport fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (54 commits) RDMA/ocrdma: Fix compiler warning about int/pointer size mismatch IB/iser: Fix redundant pointer check in dealloc flow IB/iser: Fix possible memory leak in iser_create_frwr_pool() IB/qib: Move COUNTER_MASK definition within qib_mad.h header guards RDMA/ocrdma: Fix passing wrong opcode to modify_srq RDMA/ocrdma: Fill PVID in UMC case RDMA/ocrdma: Add ABI versioning support RDMA/ocrdma: Consider multiple SGES in case of DPP RDMA/ocrdma: Fix for displaying proper link speed RDMA/ocrdma: Increase STAG array size RDMA/ocrdma: Dont use PD 0 for userpace CQ DB RDMA/ocrdma: FRMA code cleanup RDMA/ocrdma: For ERX2 irrespective of Qid, num_posted offset is 24 RDMA/ocrdma: Fix to work with even a single MSI-X vector RDMA/ocrdma: Remove the MTU check based on Ethernet MTU RDMA/ocrdma: Add support for fast register work requests (FRWR) RDMA/ocrdma: Create IRD queue fix IB/core: Better checking of userspace values for receive flow steering IB/mlx4: Add receive flow steering support IB/core: Export ib_create/destroy_flow through uverbs ...
generated by cgit v0.10.2 at 2024-06-03 04:52:52 (GMT)