summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2008-10-13vfs: Use const for kernel parser tableSteven Whitehouse
This is a much better version of a previous patch to make the parser tables constant. Rather than changing the typedef, we put the "const" in all the various places where its required, allowing the __initconst exception for nfsroot which was the cause of the previous trouble. This was posted for review some time ago and I believe its been in -mm since then. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-10Merge branches 'cma', 'cxgb3', 'ehca', 'ipath', 'ipoib', 'mad', 'misc', ↵Roland Dreier
'mlx4', 'mthca' and 'nes' into for-next
2008-10-10RDMA/nes: Fix slab corruptionChien Tung
Referencing cm_node after it is freed via rem_ref_cm_node() causes a slab corruption. There is no need to set cm_node->cm_id to NULL in mini_cm_close(). Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-09IB/mlx4: Set RLKEY bit for kernel QPsVladimir Sokolovsky
Set RLKEY bit in the HW context for kernel QPs so that kernel QPs can use the reserved L_Key for memory reference. Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-08RDMA/nes: Correct error_module bit maskChien Tung
error_module is 5 bits wide not 4. The corresponding crit_error_count array is correct with 32 entries. Signed-off-by: Chien Tung <ctung@neteffect.com> -- drivers/infiniband/hw/nes/nes_hw.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-03RDMA/nes: Fix routed RDMA connectionsBob Sharp
Fix routed RDMA connections to destinations where the next hop is not the final destination. Use neigh_*() to properly locate neighbor. Signed-off-by: Bob Sharp <bsharp@neteffect.com> Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com>
2008-10-03RDMA/nes: Enhanced PFT management schemeVadim Makhervaks
Change management of perfect filter table to allow enhanced performance applications. Signed-off-by: Vadim Makhervaks <vmakhervaks@neteffect.com> Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Handle AE bounds violationFaisal Latif
Handle async error NES_AEQE_AEID_AMP_BOUNDS_VIOLATION. Signed-off-by: Faisal Latif <flatif@neteffect.com> Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Limit critical error interruptsChien Tung
Mask off a critical error after 100 critical error interrupts to keep the system "sane". Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Stop spurious MAC interruptsChien Tung
Mask off MAC interrupts on netdev_stop to prevent spurious MAC interrupts on unload/reload of iw_nes. Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Correct tso_wqe_lengthChien Tung
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Fill in firmware version for ethtoolChien Tung
Fill in firmware version for ethtool_drvinfo. Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Use ethtool timer valueJohn Lacombe
Use timer value set via ethtool intead of #defines. Signed-off-by: John Lacombe <jlacombe@neteffect.com> Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Correct MAX TSO frags valueBob Sharp
Use correct define for max TSO fragments. Signed-off-by: Bob Sharp <bsharp@neteffect.com> Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Enable MC/UC after changing MTUBob Sharp
Re-enable multicast and unicast after changing MTU. Signed-off-by: Bob Sharp <bsharp@neteffect.com> Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Free NIC TX buffers when destroying NIC QPBob Sharp
Signed-off-by: Bob Sharp <bsharp@neteffect.com> Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Fix MDC settingChien Tung
Clear MDC bits before setting them to a new value. Adjust MDC value for 10G. Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Add wqm_quanta module optionChien Tung
Add a module parameter wqm_quanta. It controls the number of segments transmitted at a time. Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Module parameter permissionsChien Tung
Change permission to 0644 so root can set mpa_version, disable_mpa_crc, send_first, and nes_drv_opt at runtime. Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/cxgb3: Set active_mtu in ib_port_attrJon Mason
When running ibv_devinfo, the active_mtu returned is garbage. This is due to the field not being populated in the query_port function in the driver. The patch below populates the active_mtu field with a MTU of 2k. It also zeros the struct, so that any new additions to it will return 0. Signed-off-by: Jon Mason <jon@opengridcomputing.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Add support for 4-port 1G HP blade cardChien Tung
Add support for NetEffect 4 port 1G HP blade card. The mapping between physical port and MAC is different from the standup card. Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Make mini_cm_connect() staticFaisal Latif
Signed-off-by: Faisal Latif <flatif@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30IB/cm: Correctly free cm_device structureHefty, Sean
commit 110cf374 ("infiniband: make cm_device use a struct device and not a kobject.") introduced a memory leak, since it deleted cm_release_dev_obj(), which was where cm_dev was freed. Fix this by freeing the leaked structure after calling device_unregister(). Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30IPoIB: Use netif_tx_lock() and get rid of private tx_lock, LLTXRoland Dreier
Currently, IPoIB is an LLTX driver that uses its own IRQ-disabling tx_lock. Not only do we want to get rid of LLTX, this actually causes problems because of the skb_orphan() done with this tx_lock held: some skb destructors expect to be run with interrupts enabled. The simplest fix for this is to get rid of the driver-private tx_lock and stop using LLTX. We kill off priv->tx_lock and use netif_tx_lock[_bh]() instead; the patch to do this is a tiny bit tricky because we need to update places that take priv->lock inside the tx_lock to disable IRQs, rather than relying on tx_lock having already disabled IRQs. Also, there are a couple of places where we need to disable BHs to make sure we have a consistent context to call netif_tx_lock() (since we no longer can use _irqsave() variants), and we also have to change ipoib_send_comp_handler() to call drain_tx_cq() through a timer rather than directly, because ipoib_send_comp_handler() runs in interrupt context and drain_tx_cq() must run in BH context so it can call netif_tx_lock(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30IB/mthca: Use pci_request_regions()Roland Dreier
Back in prehistoric (pre-git!) days, the kernel's MSI-X support did request_mem_region() on a device's MSI-X tables, which meant that a driver that enabled MSI-X couldn't use pci_request_regions() (since that would clash with the PCI layer's MSI-X request). However, that was removed (by me!) years ago, so mthca can just use pci_request_regions() and pci_release_regions() instead of its own much more complicated code that avoids requesting the MSI-X tables. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30IB/ipath: Fix hang on module unloadYannick Cote
Handle the case where posting a send is requested when the link is down. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1117>. Signed-off-by: Yannick Cote <yannick.cote@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-25IPoIB: Fix crash when path record fails after path flushRoland Dreier
Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events") changed how paths are flushed on an SM event. This change introduces a problem if the path record query triggered by fails, causing path->ah to become NULL. A later successful path query will then trigger WARN_ON() in path_rec_completion(), and crash because path->ah has already been freed, so the ipoib_put_ah() inside the lock in path_rec_completion() may actually drop the last reference (contrary to the comment that claims this is safe). Fix this by updating path->ah and freeing old_ah only when the path record query is successful. This prevents the neighbour AH and that path AH from getting out of sync. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1194> Reported-by: Rabah Salem <ravah@mellanox.com> Debugged-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-21IB: Drop code after return statementJulia Lawall
A break after a return serves no purpose, remove it. Signed-off-by: Julia Lawall <julia@diku.dk> Reviewed-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-21IB/mad: Don't discard BMA responses in kernelMichael Brooks
This fixes the problem of incoming BMA responses being dropped due to a bad "is response" check. Fix the test to use the ib_response_mad() predicate, which correctly handles BMA MADs. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=988>. Signed-off-by: Michael Brooks <michael.brooks@qlogic.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-21IB/ipath: Fix SLID generation for RC/UC QPs when LMC > 0Ralph Campbell
The code to set the source LID in the sent LRH was not setting the low bits if LMC != 0 for RC/UC QPs. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-21IB/ehca: Generate flush status CQ entriesAlexander Schmidt
When a QP goes into error state, it is required that CQ entries with a flush error status are delivered to the application for any outstanding work requests. eHCA does not do this in hardware, so this patch adds software flush CQE generation to the ehca driver. Whenever a QP gets into error state, it is added to the QP error list of its respective CQ. If the error QP list of a CQ is not empty, poll_cq() generates flush CQEs before polling the actual CQ. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop() RDMA/nes: Fix client side QP destroy IB/mlx4: Fix up fast register page list format mlx4_core: Set RAE and init mtt_sz field in FRMR MPT entries
2008-09-16Merge branches 'ipoib', 'mlx4' and 'nes' into for-linusRoland Dreier
2008-09-16IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop()Yossi Etigin
Taking rtnl_lock in ipoib_mcast_join_complete() causes a deadlock with ipoib_stop(). We avoid it by scheduling the piece of code that takes the lock on ipoib_workqueue instead of executing it directly. This works because we only flush the ipoib_workqueue with the RTNL not held. The deadlock happens because ipoib_stop() calls ipoib_ib_dev_down() which calls ipoib_mcast_dev_flush(), which calls ipoib_mcast_free(), which calls ipoib_mcast_leave(). The latter calls ib_sa_free_multicast(), and this waits until the multicast completion handler finishes. This handler is ipoib_mcast_join_complete(), which waits for the rtnl_lock(), which was already taken by ipoib_stop(). This bug was introduced in commit a77a57a1 ("IPoIB: Fix deadlock on RTNL in ipoib_stop()"). Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-16RDMA/nes: Fix client side QP destroyFaisal Latif
Fix QP not being destroyed properly on the client, which leads to userspace programs hanging on exit. This is a missing chunk from the connection management rewrite in commit 6492cdf3 ("RDMA/nes: CM connection setup/teardown rework"). Signed-off-by: Faisal Latif <flatif@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-15IB/mlx4: Fix up fast register page list formatVladimir Sokolovsky
Byte swap the addresses in the page list for fast register work requests to big endian to match what the HCA expectx. Also, the addresses must have the "present" bit set so that the HCA knows it can access them. Otherwise the HCA will fault the first time it accesses the memory region. Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-27IB/mlx4: Actually return L_Key and R_Key for fast register MRsVladimir Sokolovsky
Initialize the L_Key and R_Key for memory regions returned from mlx4_ib_alloc_fast_reg_mr(). Otherwise callers just get garbage for the memory keys and can't do anything useful with these MRs. Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-23removed unused #include <linux/version.h>'sAdrian Bunk
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-19Merge branches 'ipath' and 'ipoib' into for-linusRoland Dreier
2008-08-19IPoIB: Fix deadlock on RTNL in ipoib_stop()Roland Dreier
Commit c8c2afe3 ("IPoIB: Use rtnl lock/unlock when changing device flags") added a call to rtnl_lock() in ipoib_mcast_join_task(), which is run from the ipoib_workqueue. However, ipoib_stop() (which is run inside rtnl_lock()) flushes this workqueue, which leads to a deadlock if the join task is pending. Fix this by simply not flushing the workqueue from ipoib_stop(). It turns out that we really don't care about workqueue tasks running during or after ipoib_stop(), as long as we make sure to flush the workqueue before unregistering a netdev. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1114>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-15IB/ipath: Fix incorrect check for max physical address in TIDDave Olson
The check for max physical address was incorrect, thus limiting the range of allowed physical addresses. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-15IB/ipath: Fix lost UD send work requestRalph Campbell
If a UD QP has some work requests queued to be sent by the DMA engine followed by a local loopback work request, we have to wait for the previous work requests to finish or the completion for the local loopback work request would be generated out of order. The problem was that the work request queue pointer was already updated so that the request would not be processed when the DMA queue drained. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12Merge branches 'ehca' and 'ipoib' into for-linusRoland Dreier
2008-08-12IB/ehca: Discard double CQE for one WRAlexander Schmidt
Under rare circumstances, the ehca hardware might erroneously generate two CQEs for the same WQE, which is not compliant to the IB spec and will cause unpredictable errors like memory being freed twice. To avoid this problem, the driver needs to detect the second CQE and discard it. For this purpose, introduce an array holding as many elements as the SQ of the QP, called sq_map. Each sq_map entry stores a "reported" flag for one WQE in the SQ. When a work request is posted to the SQ, the respective "reported" flag is set to zero. After the arrival of a CQE, the flag is set to 1, which allows to detect the occurence of a second CQE. The mapping between WQE / CQE and the corresponding sq_map element is implemented by replacing the lowest 16 Bits of the wr_id with the index in the queue map. The original 16 Bits are stored in the sq_map entry and are restored when the CQE is passed to the application. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12IB/ehca: Check idr_find() return valueAlexander Schmidt
The idr_find() function may fail when trying to get the QP that is associated with a CQE, e.g. when a QP has been destroyed between the generation of a CQE and the poll request for it. In consequence, the return value of idr_find() must be checked and the CQE must be discarded when the QP cannot be found. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12IB/ehca: Repoll CQ on invalid opcodeAlexander Schmidt
When the ehca driver detects an invalid opcode in a CQE, it currently passes the CQE to the application and returns with success. This patch changes the CQE handling to discard CQEs with invalid opcodes and to continue reading the next CQE from the CQ. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12IB/ehca: Rename goto label in ehca_poll_cq_one()Alexander Schmidt
Rename the "poll_cq_one_read_cqe" goto label to what it actually does, namely "repoll". Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12IB/ehca: Update qp_state on cached modify_qp()Alexander Schmidt
Since the introduction of the port auto-detect mode for ehca, calls to modify_qp() may be cached in the device driver when the ports are not activated yet. When a modify_qp() call is cached, the qp state remains untouched until the port is activated, which will leave the qp in the reset state. In the reset state, however, it is not allowed to post SQ WQEs, which confuses applications like ib_mad. The solution for this problem is to immediately set the qp state as requested by modify_qp(), even when the call is cached. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-08IPoIB/cm: Use vmalloc() to allocate rx_ringsDavid J. Wilder
There are users that are running UDP applications that require a large receive queue size in order to get good performance. To prevent allocation failures for rx_rings when using non-SRQ mode and large recv_queue_size (1K or larger), use vmalloc() instead of kcalloc() to alocate rx_rings. Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mad: Test ib_create_send_mad() return with IS_ERR(), not == NULL IB/mlx4: Allow 4K messages for UD QPs mlx4_core: Add ethernet fields to CQE struct IB/ipath: Fix printk format warnings RDMA/cxgb3: Fix deadlock initializing iw_cxgb3 device RDMA/cxgb3: Fix up MW access rights RDMA/cxgb3: Fix QP capabilities RDMA/cma: Remove padding arrays by using struct sockaddr_storage IB/ipath: Use unsigned long for irq flags IPoIB/cm: Set correct SG list in ipoib_cm_init_rx_wr()
generated by cgit v0.10.2 at 2024-11-01 07:39:33 (GMT)