summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2006-05-30Input: psmouse - DMI updates for lifebook protocolKenan Esau
Added different lifebook-versions and the CF-18 to the corresponding dmi-table. Signed-off-by: Kenan Esau <kenan.esau@conan.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-05-30Input: change from numbered to named switchesRichard Purdie
Remove the numbered SW_* entries from the input system and assign names to the existing users. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-05-30Input: alps - fix old protocol decodingYotam Medini
Correct touchpad left & right keys assignments for ALPS_OLDPROTO that were swapped. Old protocol is used on UMAX ActionBook-530T notebook. Signed-off-by: Yotam Medini <yotam.medini@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-05-30Input: wistron - add support for AOpen Barebook 1559asmasc@theaterzentrum.at
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-05-30Input: psmouse - add detection of Logitech TrackMan Wheel trackballZbigniew Luszpinski
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-05-30Input: sidewinder - fix memory leakJesper Juhl
In sw_connect we leak 'buf' and 'idbuf' when we do not leave via one of the fail* labels. This was spotted by the coverity checker. Patch is compile tested only due to lack of hardware. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-05-26[PATCH] ads7846 conversion accuracyDavid Brownell
This improves accuracy of the touchscreen and hwmon sensor readings, addressing an issue noted by Imre Deak: there's an extra bit written before the sample (12 bits) gets written out. It also catches up to various comments, and makes the /proc/interrupts entry sensible again. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Imre Deak <imre.deak@nokia.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-04Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3490/1: i.MX: move uart resources to board files [ARM] 3488/1: make icedcc_putc do the right thing [ARM] 3487/1: IXP4xx: Support non-PCI systems [ARM] 3486/1: Mark memory as clobbered by the ARM _syscallX() macros
2006-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: make EVIOCGSND return meaningful data Input: ressurect EVIOCGREP and EVIOCSREP Input: psmouse - fix new device detection logic Input: move input_device_id to mod_devicetable.h Input: allow using several chords for braille Input: allow passing NULL to input_free_device() Input: spitzkbd - fix the reversed Address and Calender keys Input: ads7846 - improve filtering for thumb press accuracy Input: ads7846 - report 0 pressure value along with pen up event Input: ads7846 - handle IRQs that were latched during disabled IRQs Input: ads7846 - miscellaneous fixes Input: ads7846 - use msleep() instead of udelay() in suspend Input: ads7846 - debouncing and rudimentary sample filtering Input: ads7846 - power down ADC a bit later Input: ads7846 - add pen_down sysfs attribute Input: wistron - add support for Fujitsu N3510 Input: wistron - add signature for Amilo M7400
2006-04-30[ARM] 3486/1: Mark memory as clobbered by the ARM _syscallX() macrosMarkus Gutschke
Patch from Markus Gutschke In order to prevent gcc from making incorrect optimizations, all asm() statements that define system calls should report memory as clobbered. Recent versions of the headers for i386 have been changed accordingly, but the ARM headers are still defective. This patch fixes the bug tracked at http://bugzilla.kernel.org/show_bug.cgi?id=6205 Signed-off-by: Markus Gutschke <markus@google.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-29Input: make EVIOCGSND return meaningful dataDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-29Input: ressurect EVIOCGREP and EVIOCSREPDmitry Torokhov
While writing to an event device allows to set repeat rate for an individual input device there is no way to retrieve current settings so we need to ressurect EVIOCGREP. Also ressurect EVIOCSREP so we have a symmetrical interface. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-29Input: psmouse - fix new device detection logicDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-29Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Dmitry Torokhov
2006-04-28[PATCH] powerpc: Use check_legacy_ioport() on ppc32 too.David Woodhouse
Some people report that we die on some Macs when we are expecting to catch machine checks after poking at some random I/O address. I'd seen it happen on my dual G4 with serial ports until we fixed those to use OF, but now other users are reporting it with i8042. This expands the use of check_legacy_ioport() to avoid that situation even on 32-bit kernels. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-26Input: move input_device_id to mod_devicetable.hDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-26Input: spitzkbd - fix the reversed Address and Calender keysRichard Purdie
Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-26Input: ads7846 - improve filtering for thumb press accuracyImre Deak
Providing more accurate coordinates for thumb press requires additional steps in the filtering logic: - Ignore samples found invalid by the debouncing logic, or the ones that have out of bound pressure value. - Add a parameter to repeat debouncing, so that more then two consecutive good readings are required for a valid sample. Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Juha Yrjola <juha.yrjola@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-26Input: ads7846 - report 0 pressure value along with pen up eventImre Deak
X touchscreen drivers that don't interpret the designated pen up message assume a pen up event from a pressure value 0. For these we generate a pressure 0 message along with the pen up message. Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Juha Yrjola <juha.yrjola@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-21[PARISC] Fix up hil_kbd.c mismergeMatthew Wilcox
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-04-12Input: ads7846 - handle IRQs that were latched during disabled IRQsImre Deak
The pen down IRQ will toggle during each X,Y,Z measurement cycle. Even though the IRQ is disabled it will be latched and delivered when after enable_irq. Thus in the IRQ handler we must avoid starting a new measurement cycle when such an "unwanted" IRQ happens. Add a get_pendown_state platform function, which will probably determine this by reading the current GPIO level of the pen IRQ pin. Move the IRQ reenabling from the SPI RX function to the timer. After the last power down message the pen IRQ pin is still active for a while and get_pendown_state would report incorrectly a pen down state. When suspending we should check the ts->pending flag instead of ts->pendown, since the timer can be pending regardless of ts->pendown. Also if ts->pending is set we can be sure that the timer is running, so no need to rearm it. Similarly if ts->pending is not set we can be sure that the IRQ is enabled (and the timer is not). Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-12Input: ads7846 - miscellaneous fixesImre Deak
- Add disable attribute to support device locking mode where unintentional touch event shouldn't wake up the system; - Update comments; - Add missing spin_lock_init; - Do device resume with the lock held; - Do cleanup calls / free memory in the reverse order of initialization. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-12Input: ads7846 - use msleep() instead of udelay() in suspendJuha Yrjola
Sometimes a polling loop had a hard time changing state without pre-emption enabled. Use msleep instead, it's better anyway. Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-12Input: ads7846 - debouncing and rudimentary sample filteringImre Deak
Some touchscreens seem to oscillate heavily for a while after touching the screen.  Implement support for sampling the screen until we get two consecutive values that are close enough. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-12Input: ads7846 - power down ADC a bit laterImre Deak
Submit a seperate request for powering down the ADC in ads7846, doing it after the last read request. Otherwise some of the read values are incorrect. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-12Input: ads7846 - add pen_down sysfs attributeImre Deak
It's handy for userspace diagnostics to see the pen down status, to see whether the touchscreen is "stuck" (shortcircuited). Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-05Input: wistron - add support for Fujitsu N3510John Reed Riley
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-05Input: wistron - add signature for Amilo M7400Stefan Rompf
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-02Input: synaptics - limit rate to 40pps on Toshiba Protege M300Richard Thrippleton
Toshiba Protege M300 also requires the same workaround as Satellites and Dynabooks - Synaptics report rate should be lowered to 40pps (from 80), otherwise KBC starts losing keypresses. Signed-off-by: Richard Thrippleton <ret28@cam.ac.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-02Input: gamecon - add SNES mouse supportRaphael Assenat
SNES gamepads and mice share the same type of interface so they both can be connected to the parallel port using a simple interface. Adding mouse support to a gamepad driver may sound funny at first, but doing so in this case makes it possible to connect and SNES gamepads and mice at the same time, on the same port. Signed-off-by: Raphael Assenat <raph@raphnet.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-02Input: make modalias code respect allowed buffer sizeDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-02Input: convert /proc handling to seq_fileDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-02Input: limit attributes' output to PAGE_SIZEDmitry Torokhov
sysfs can't handle more than PAGE_SIZE data coming from attributes' show() methods; make sure we respect this limit. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-02Manual merge with Linus.Dmitry Torokhov
Conflicts: arch/powerpc/kernel/setup-common.c drivers/input/keyboard/hil_kbd.c drivers/input/mouse/hil_ptr.c
2006-03-30[PARISC] Fix double free when removing HIL driversKyle McMartin
On Thu, Mar 30, 2006 at 08:31:02AM -0500, Dmitry Torokhov wrote: > Don't do that, its double free. input_unregister_device() normally > causes release() to be called and free the device. input_free_device > is only to be called when input_register_device has not been called or > failed. > > Plus you might want to unregister device after closing serio port, > otherwise your interrupt routine might be referencing already freed > memory. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-03-30[PARISC] Convert HIL drivers to use input_allocate_deviceHelge Deller
Convert HIL drivers to use input_allocate_device() - avoids crashes. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-03-30[PARISC] I/O-Space must be ioremap_nocache()'dHelge Deller
Addresses in F-space must be accessed uncached on most parisc machines. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-03-28[PATCH] mark f_ops const in the inodeArjan van de Ven
Mark the f_ops members of inodes as const, as well as fix the ripple-through this causes by places that copy this f_ops and then "do stuff" with it. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: drivers/char/ftape/lowlevel/fdc-io.c: Correct a comment Kconfig help: MTD_JEDECPROBE already supports Intel Remove ugly debugging stuff do_mounts.c: Minor ROOT_DEV comment cleanup BUG_ON() Conversion in drivers/s390/block/dasd_devmap.c BUG_ON() Conversion in mm/mempool.c BUG_ON() Conversion in mm/memory.c BUG_ON() Conversion in kernel/fork.c BUG_ON() Conversion in ipc/sem.c BUG_ON() Conversion in fs/ext2/ BUG_ON() Conversion in fs/hfs/ BUG_ON() Conversion in fs/dcache.c BUG_ON() Conversion in fs/buffer.c BUG_ON() Conversion in input/serio/hp_sdc_mlc.c BUG_ON() Conversion in md/dm-table.c BUG_ON() Conversion in md/dm-path-selector.c BUG_ON() Conversion in drivers/isdn BUG_ON() Conversion in drivers/char BUG_ON() Conversion in drivers/mtd/
2006-03-26[PATCH] ads7846: sparc32 warning fixAndrew Morton
drivers/input/touchscreen/ads7846.c: In function `ads7846_read12_ser': drivers/input/touchscreen/ads7846.c:207: warning: implicit declaration of function `disable_irq' drivers/input/touchscreen/ads7846.c:209: warning: implicit declaration of function `enable_irq' Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26BUG_ON() Conversion in input/serio/hp_sdc_mlc.cEric Sesterhenn
this changes if() BUG(); constructs to BUG_ON() which is cleaner and can better optimized away Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (21 commits) BUG_ON() Conversion in drivers/video/ BUG_ON() Conversion in drivers/parisc/ BUG_ON() Conversion in drivers/block/ BUG_ON() Conversion in sound/sparc/cs4231.c BUG_ON() Conversion in drivers/s390/block/dasd.c BUG_ON() Conversion in lib/swiotlb.c BUG_ON() Conversion in kernel/cpu.c BUG_ON() Conversion in ipc/msg.c BUG_ON() Conversion in block/elevator.c BUG_ON() Conversion in fs/coda/ BUG_ON() Conversion in fs/binfmt_elf_fdpic.c BUG_ON() Conversion in input/serio/hil_mlc.c BUG_ON() Conversion in md/dm-hw-handler.c BUG_ON() Conversion in md/bitmap.c The comment describing how MS_ASYNC works in msync.c is confusing rcu: undeclared variable used in documentation fix typos "wich" -> "which" typo patch for fs/ufs/super.c Fix simple typos tabify drivers/char/Makefile ...
2006-03-25[PATCH] ads7846 build fixAndrew Morton
sparc32: drivers/input/touchscreen/ads7846.c: In function `ads7846_read12_ser': drivers/input/touchscreen/ads7846.c:206: warning: implicit declaration of function `disable_irq' drivers/input/touchscreen/ads7846.c:208: warning: implicit declaration of function `enable_irq' Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24BUG_ON() Conversion in input/serio/hil_mlc.cEric Sesterhenn
this changes if() BUG(); constructs to BUG_ON() which is cleaner and can better optimized away Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-14Input: gameport - fix memory leakAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14Input: serio - fix memory leakAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14Input: zaurus keyboard driver updatesRichard Purdie
* Change the scan interval from 100ms to 50ms. This stops the key repeat from triggering on double letter presses. * Remove unneeded stale hinge code from corgikbd * Change unneeded corgi GPIO pins to inputs when suspended * Add support for the headphone jack switch for both corgi and spitz (as switch SW_2) Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14Input: i8042 - fix logic around pnp_register_driver()Bjorn Helgaas
Do not assume that pnp_register_driver() returns the number of devices claimed. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14Input: ns558 - fix logic around pnp_register_driver()Bjorn Helgaas
Do not assume that pnp_register_driver() returns the number of devices claimed. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-14Input: pcspkr - separate device and driver registrationMichael Neuling
The current pcspkr code combines the device and driver registration. This patch splits these, putting the device registration in the arch specific code. PowerPC and MIPS only have the pcspkr present sometimes. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>