summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2012-05-02Input: wacom - use dev_xxx() instead of naked printk()s and dbg()sDmitry Torokhov
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02Input: wacom - return proper error if usb_get_extra_descriptor() failsDmitry Torokhov
Instead of returning 1 (which is not even negative) let's capture and return error codde returned by usb_get_extra_descriptor(). Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02Input: wacom - fix sparse warningDmitry Torokhov
This fixes the following warning from sparse warning: Using plain integer as NULL pointer Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-30Input: add support for DA9052/53 touch screen controllerAshish Jangam
This driver adds support for DA9052/53 4-wire resistive ADC interfaced touchscreen controller. DA9052/53 is a multi-function device, therefore this driver depends on DA9052/53 core. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-30Input: usbtouchscreen - only expose e2i configure option in expert modeShawn Landden
as is the case of all other devices supported by usbtouchscreen.c Also list e2i under the composite configure option (TOUCHSCREEN_USB_COMPOSITE) Signed-off-by: Shawn Landden <shawnlandden@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-30Input: usbtouchscreen - fix typoShawn Landden
Signed-off-by: Shawn Landden <shawnlandden@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-30Input: wacom - add 0xE5 (MT device) supportPing Cheng
Main part of patch is adding support for a new Wacom MT touch packet and labels these devices using MTSCREEN type. Other items of interest: Delete some duplicate code in HID parsing for Y info since its already done in X path. In wacom_query_tablet_data(), only invoke the set report that requests tablets to send Wacom Touch packets for Finger interfaces. Mostly, this is to make code intent clear. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-30Input: wacom - retrieve maximum number of touch pointsPing Cheng
From the HID usage table when it is supported. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-24Input: aiptek - adjust error-handling code labelJulia Lawall
At the point of this error-handling code, aiptek->urb has been allocated, and it does not appear to be less necessary to free it here than in the error-handling code just below. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-24Input: lpc32xx_ts - fix device tree compatible stringRoland Stigge
During the device tree integration of the various LPC32xx drivers, we agreed on using non-wildcard "compatible" strings. This change switches lpc32xx_ts touchscreen driver to use "nxp,lpc3220-tsc". Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-24Input: atkbd - fix language in a printed messageJesper Juhl
I believe that "trying to access hardware" is more correct English than "trying access hardware". Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-22Input: use module_pci_driverAxel Lin
This patch converts the drivers in drivers/input/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-22Merge commit 'v3.4-rc4' into nextDmitry Torokhov
2012-04-21Input: serio_raw - ensure we don't block in non-blocking readDmitry Torokhov
Avoid calling wait_event_interruptible() if client requested non-blocking read, since it is not guaranteed that another thread will not consume event after we checked if serio_raw->head != serio_raw->tail. Also ensure we do not return 0 but keep waiting instead in blocking case, when another thread steals "our" byte. Reviewed-by: David Herrmann <dh.herrmann@googlemail.com> Reviewed-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-21Input: tc3589x-keypad - remove unnecessary checksDmitry Torokhov
settle_time and debounce_period are u8 and thus can not be greater than TC3589x_MAX_DEBOUNCE_SETTLE which is 255. There also no need to mask out nibbles form board->krow and board->kcol as we validate that they are in correct range. Reported-by: Werner <w.landgraf@ru.ru> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-21Input: cma3000-d0x - remove unneeded checksDmitry Torokhov
data->mode is unsigned and can not be less than 0. Reported-by: Werner <w.landgraf@ru.ru> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-21Input: matrix-keypad - undo GPIO setup if input_register_device failsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-21Input: matrix-keypad - allocate keycodes with keypad structureDmitry Torokhov
Instead of allocating and managing keymap separately from the keypad structure stick it at the end as a variable-length array. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-21Input: matrix-keypad - fix 'duplicate const' sparse warningDmitry Torokhov
SIMPLE_DEV_PM_OPS already defines constant dev_pm_ops. Also guard PM methods with CONFIG_PM_SLEEP and get rid of some unneeded #ifdefs. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-21Input: lpc32xx_ts - add device tree supportRoland Stigge
This change implements device tree support for the LPC32xx SoC's touchscreen controller. Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-16mfd: Convert twl6040 to i2c driver, and separate it from twl corePeter Ujfalusi
Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just a few small fixes..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: da9052 - fix memory leak in da9052_onkey_probe() Input: gpio_mouse - use linux/gpio.h rather than asm/gpio.h Input: trackpoint - use psmouse_fmt() for messages Input: elantech - v4 is a clickpad, with only one button Input: elantech - reset touchpad before configuring it Input: sentelic - filter taps in absolute mode Input: tps6507x-ts - fix MODULE_ALIAS to match driver name
2012-04-12Input: da9052 - fix memory leak in da9052_onkey_probe()Jesper Juhl
If, in drivers/input/misc/da9052_onkey.c::da9052_onkey_probe(), the call to either kzalloc() or input_allocate_device() fails then we will return -ENOMEM from the function without freeing the other allocation that may have succeeded, thus we leak either the memory allocated for 'onkey' or the memory allocated for 'input_dev' if one succeeds and the other fails. Fix that by jumping to the 'err_free_mem' label at the end of the function that properly cleans up rather than returning directly. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-11Input: ep93xx_keypad - switch to using dev_pm_opsDmitry Torokhov
Also use CONFIG_PM_SLEEP instead of CONFIG_PM to guard PM methods. Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-10Input: gpio_mouse - use linux/gpio.h rather than asm/gpio.hMark Brown
Direct usage of the asm include has long been deprecated by the introduction of gpiolib. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-10Input: wacom_i2c - do not use irq_to_gpioDmitry Torokhov
Because irq_to_gpio() is not available on many platforms let's switch to level-triggered one-shot IRQs that will stay active as long as there is data to be read. Tested-by: Tobita Tatsunosuke <tobita.tatsunosuke@wacom.co.jp> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-10Input: trackpoint - use psmouse_fmt() for messagesJJ Ding
Use psmouse_*() macros introduced in commit b5d21704361ee. Signed-off-by: JJ Ding <dgdunix@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-10Input: elantech - v4 is a clickpad, with only one buttonJJ Ding
Add pointer and buttonpad properties for v4 hardware. Also, Jachiet reported that on Asus UX31, right button has no effect. It turns out v4 has only one button, the right-button effect is implemented with software when Windows driver is installed, or in firmware when touchpad is in relative mode. So remove BTN_RIGHT while at it. Reported-by: Jachiet Louis <louis@jachiet.com> Signed-off-by: JJ Ding <jj_ding@emc.com.tw> Reviewed-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-10Input: elantech - reset touchpad before configuring itJJ Ding
Acer VH40 has a Fn key toggling the touchpad on and off, but it's implemented in system firmware, and the EC chip has to receive reset command to activate this function. Also when this machine wakes up after resume, psmouse_reset is necessary to bring the touchpad back on. Signed-off-by: JJ Ding <jj_ding@emc.com.tw> Reviewed-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: gameport - use module_gameport_driverAxel Lin
This patch converts the drivers in drivers/input/* to use module_gameport_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: serio - use module_serio_driverAxel Lin
This patch converts the drivers in drivers/input/* to use module_serio_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: wacom - add Intuos5 multitouch sensor supportJason Gerecke
Intuos5 tablets with PTH-* model numbers include a multitouch sensor which use the same touch reports as the 3rd-generation Bamboo. No useful information is in the HID descriptor for the touch interface so hardcoded values are used during setup. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: wacom - add Intuos5 Touch Ring LED supportJason Gerecke
The Touch Ring LEDs on Intuos5 tablets use a different report format which supports only 4 levels of brightness. We remap the 7-bit value obtained from sysfs to an appropriate value for the tablet. Control of the crop mark LEDs (new to the I5) is left for a later patch. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: wacom - add Intuos5 Touch Ring/ExpressKey supportJason Gerecke
Intuos5 uses a new report type for Touch Ring and ExpressKey data. Note that data from the capacitive sensors present on the ExpressKeys will be ignored until a proper way is found to expose it. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: wacom - add basic Intuos5 supportJason Gerecke
This patch adds support for the basic pen functions of Intuos5 tablets. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: st1232 - switch to using SIMPLE_DEV_PM_OPSDmitry Torokhov
Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: st1232 - add device tree supportMagnus Damm
This patch enables DT support for the st1232 driver which is primarily used on the sh7372 Mackerel board. [dtor@mail.ru: chnaged to use CONFIG_OF and of_match_ptr] Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: add support for LM8333 keypadsWolfram Sang
This driver adds support for the keypad part of the LM8333 and is prepared for possible GPIO/PWM drivers. Note that this is not a MFD because you cannot disable the keypad functionality which, thus, has to be handled by the core anyhow. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: add support for Wacom Stylus device with I2C interfaceTatsunosuke Tobita
This adds support for Wacom Stylus device with I2C interface. [Dan Carpenter <dan.carpenter@oracle.com>: fix NULL-pointer dereference in error handling path.] Signed-off-by: Tatsunosuke Tobita <tobita.tatsunosuke@wacom.co.jp> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-03Input: xilinx_ps2 - allocate serio port separatelyDmitry Torokhov
'struct serio' is a refcounted data structure with lifetime rules different from 'struct xps2data'. It is quite likely that serio_unregister_port() will try to free memory allocated by the port and that is why it should be allocated separately. Also switch to using platform_get/set_drvdata instead of dev_get/set_drvdata because we are dealing with platform device. Reported-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-03Input: sentelic - filter taps in absolute modeOskari Saarenmaa
Taps in absolute positioning single-finger mode are currently reported as physical clicks by the driver. This should be handled by userspace, not the kernel. When a tap occurs, the FSP_PB0_LBTN bit is set, but the FSP_PB0_PHY_BTN is not. We use this to filter out physical clicks from taps. Signed-off-by: Oskari Saarenmaa <os@ohmu.fi> Reviewed-by: Tai-hwa Liang <avatar@sentelic.com> Reviewed-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-03Input: tps6507x-ts - fix MODULE_ALIAS to match driver nameUwe Kleine-König
This is needed to make module auto loading work. [dtor@mail.ru: remove file name from comment] Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull 2nd round of input updates from Dmitry Torokhov: - update to Wacom driver to support wireless devices - update to Sentelci touchpad driver to support newer hardware - update to gpio-keys driver to support "interrupt-only" keys - fixups to earlier commits * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - check for allocation failure in probe() Input: tegra-kbc - allocate pdata before using it Input: amijoy - add missing platform check Input: wacom - wireless battery status Input: wacom - create inputs when wireless connect Input: wacom - wireless monitor framework Input: wacom - isolate input registration Input: sentelic - improve packet debugging information Input: sentelic - minor code cleanup Input: sentelic - enabling absolute coordinates output for newer hardware Input: sentelic - refactor code for upcoming new hardware support Input: gpio_keys - add support for interrupt only keys Input: gpio_keys - consolidate key destructor code Input: revert "gpio_keys - switch to using threaded IRQs" Input: gpio_keys - constify platform data Input: spear-keyboard - remove kbd_set_plat_data()
2012-03-30Input: wacom - check for allocation failure in probe()Dan Carpenter
We accidentally removed the check for NULL in 3aac0ef10b "Input: wacom - isolate input registration". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-30Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc fixes from Olof Johansson: "This is a first pass of some of the merge window fallout for ARM platforms. Nothing controversial: - A system.h fallout fix for OMAP - PXA fixes for breakage caused by the regulator struct changes - GPIO fixes for OMAP to properly deal with dynamic IRQ allocation - A mismerge in our arm-soc tree of an lpc32xx change for networking - A fix for USB setup on tegra - An undo of __init annotation of display mux setup on OMAP that's needed at runtime" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: pxa: fix build issue on stargate2 ARM: pxa: fix build issue on cm-x300 ARM: pxa: fix build failure for regulator consumer in em-x270.c ARM: LPC32xx: clock.c: Fix lpc-eth clock reference ARM: OMAP: pm: fix compilation break ARM: OMAP: Remove OMAP_GPIO_IRQ macro definition drivers: input: Fix OMAP_GPIO_IRQ with gpio_to_irq() in ams_delta_serio_exit() ARM: OMAP: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq() ARM: pxa: fix regulator related build fail in magician_defconfig ARM: tegra: Fix device tree AUXDATA for USB/EHCI ARM: OMAP2+: Remove __init from DSI mux functions
2012-03-30Merge branch 'x86-x32-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x32 support for x86-64 from Ingo Molnar: "This tree introduces the X32 binary format and execution mode for x86: 32-bit data space binaries using 64-bit instructions and 64-bit kernel syscalls. This allows applications whose working set fits into a 32 bits address space to make use of 64-bit instructions while using a 32-bit address space with shorter pointers, more compressed data structures, etc." Fix up trivial context conflicts in arch/x86/{Kconfig,vdso/vma.c} * 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) x32: Fix alignment fail in struct compat_siginfo x32: Fix stupid ia32/x32 inversion in the siginfo format x32: Add ptrace for x32 x32: Switch to a 64-bit clock_t x32: Provide separate is_ia32_task() and is_x32_task() predicates x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls x86/x32: Fix the binutils auto-detect x32: Warn and disable rather than error if binutils too old x32: Only clear TIF_X32 flag once x32: Make sure TS_COMPAT is cleared for x32 tasks fs: Remove missed ->fds_bits from cessation use of fd_set structs internally fs: Fix close_on_exec pointer in alloc_fdtable x32: Drop non-__vdso weak symbols from the x32 VDSO x32: Fix coding style violations in the x32 VDSO code x32: Add x32 VDSO support x32: Allow x32 to be configured x32: If configured, add x32 system calls to system call tables x32: Handle process creation x32: Signal-related system calls x86: Add #ifdef CONFIG_COMPAT to <asm/sys_ia32.h> ...
2012-03-29Merge branch 'fixes-gpio-to-irq' into fixesTony Lindgren
Conflicts: arch/arm/mach-omap1/board-htcherald.c arch/arm/mach-omap2/board-rx51-peripherals.c arch/arm/plat-omap/include/plat/gpio.h drivers/input/serio/ams_delta_serio.c
2012-03-29drivers: input: Fix OMAP_GPIO_IRQ with gpio_to_irq() in ams_delta_serio_exit()Tarun Kanti DebBarma
Even though ams-delta-serio input driver uses gpio_to_irq() in all relevent places to get irq number, the ams_delta_serio_exit() still uses OMAP_GPIO_IRQ macro. Fix this. Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Merge tag 'mfd_3.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and TI's TPS65090 and TPS65217. - New variants support (8420, 8520 ab9540), cleanups and bug fixes for the abx500 and db8500 ST-E chipsets. - Some minor fixes and update for the wm8994 from Mark. - The beginning of a long term TWL cleanup effort coming from the TI folks. - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997 drivers. Fix up trivial conflicts due to duplicate patches and header file cleanups (<linux/device.h> removal etc). * tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits) gpio/twl: Add DT support to gpio-twl4030 driver gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support mfd: Detach twl6040 from the pmic mfd driver mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups mfd: Micro-optimization on twl4030 IRQ handler mfd: Make twl4030 SIH SPARSE_IRQ capable mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files mfd: Remove references already defineid in header file from twl-core mfd: Remove unneeded header from twl-core mfd: Make twl-core not depend on pdata->irq_base/end ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files mfd: Return twl6030_mmc_card_detect IRQ for board setup Revert "mfd: Add platform data for MAX8997 haptic driver" mfd: Add support for TPS65090 mfd: Add some da9052-i2c section annotations mfd: Build rtc5t583 only if I2C config is selected to y. mfd: Add anatop mfd driver mfd: Fix compilation error in tps65910.h mfd: Add 8420 variant to db8500-prcmu mfd: Add 8520 PRCMU variant to db8500-prcmu ...
generated by cgit v0.10.2 at 2024-11-09 13:38:15 (GMT)