summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2012-05-30i2c: Split I2C_M_NOSTART support out of I2C_FUNC_PROTOCOL_MANGLINGMark Brown
Since there are uses for I2C_M_NOSTART which are much more sensible and standard than most of the protocol mangling functionality (the main one being gather writes to devices where something like a register address needs to be inserted before a block of data) create a new I2C_FUNC_NOSTART for this feature and update all the users to use it. Also strengthen the disrecommendation of the protocol mangling while we're at it. In the case of regmap-i2c we remove the requirement for mangling as I2C_M_NOSTART is the only mangling feature which is being used. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-05-29Merge tag 'mfd-3.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "Besides the usual cleanups, this one brings: * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton, ST-E's STAX211, Samsung's MAX77693 and TI's LM3533. * Device tree support for the twl6040, tps65910, da9502 and ab8500 drivers. * Fairly big tps56910, ab8500 and db8500 updates. * i2c support for mc13xxx. * Our regular update for the wm8xxx driver from Mark." Fix up various conflicts with other trees, largely due to ab5500 removal etc. * tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits) mfd: Fix build break of max77693 by adding REGMAP_I2C option mfd: Fix twl6040 build failure mfd: Fix max77693 build failure mfd: ab8500-core should depend on MFD_DB8500_PRCMU gpio: tps65910: dt: process gpio specific device node info mfd: Remove the parsing of dt info for tps65910 gpio mfd: Save device node parsed platform data for tps65910 sub devices mfd: Add r_select to lm3533 platform data gpio: Add Intel Centerton support to gpio-sch mfd: Emulate active low IRQs as well as active high IRQs for wm831x mfd: Mark two lm3533 zone registers as volatile mfd: Fix return type of lm533 attribute is_visible mfd: Enable Device Tree support in the ab8500-pwm driver mfd: Enable Device Tree support in the ab8500-sysctrl driver mfd: Add support for Device Tree to twl6040 mfd: Register the twl6040 child for the ASoC codec unconditionally mfd: Allocate twl6040 IRQ numbers dynamically mfd: twl6040 code cleanup in interrupt initialization part mfd: Enable ab8500-gpadc driver for Device Tree mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver ...
2012-05-26Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc driver specific updates from Olof Johansson: "These changes are specific to some driver that may be used by multiple boards or socs. The most significant change in here is the move of the samsung iommu code from a platform specific in-kernel interface to the generic iommu subsystem." Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mmc: dt: Consolidate DT bindings iommu/exynos: Add iommu driver for EXYNOS Platforms ARM: davinci: optimize the DMA ISR ARM: davinci: implement DEBUG_LL port choice ARM: tegra: Add SMMU enabler in AHB ARM: tegra: Add Tegra AHB driver Input: pxa27x_keypad add choice to set direct_key_mask Input: pxa27x_keypad direct key may be low active Input: pxa27x_keypad bug fix for direct_key_mask Input: pxa27x_keypad keep clock on as wakeup source ARM: dt: tegra: pinmux changes for USB ULPI ARM: tegra: add USB ULPI PHY reset GPIO to device tree ARM: tegra: don't hard-code USB ULPI PHY reset_gpio ARM: tegra: change pll_p_out4's rate to 24MHz ARM: tegra: fix pclk rate ARM: tegra: reparent sclk to pll_c_out1 ARM: tegra: Add pllc clock init table ARM: dt: tegra cardhu: basic audio support ARM: dt: tegra30.dtsi: Add audio-related nodes ARM: tegra: add AUXDATA required for audio ...
2012-05-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer updates from Dmitry Torokhov: - a bunch of new drivers (DA9052/53 touchscreenn controller, Synaptics Navpoint, LM8333 keypads, Wacom I2C touhscreen); - updates to existing touchpad drivers (ALPS, Sntelic); - Wacom driver now supports Intuos5; - device-tree bindings in numerous drivers; - other cleanups and fixes. Fix annoying conflict in drivers/input/tablet/wacom_wac.c that I think implies that the input layer device naming is broken, but let's see. I brough it up with Dmitry. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: matrix-keymap - fix building keymaps Input: spear-keyboard - document DT bindings Input: spear-keyboard - add device tree bindings Input: matrix-keymap - wire up device tree support Input: matrix-keymap - uninline and prepare for device tree support Input: adp5588 - add support for gpio names Input: omap-keypad - dynamically handle register offsets Input: synaptics - fix compile warning MAINTAINERS: adjust input-related patterns Input: ALPS - switch to using input_mt_report_finger_count Input: ALPS - add semi-MT support for v4 protocol Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver Input: atmel_mxt_ts - dump each message on just 1 line Input: atmel_mxt_ts - do not read extra (checksum) byte Input: atmel_mxt_ts - verify object size in mxt_write_object Input: atmel_mxt_ts - only allow root to update firmware Input: atmel_mxt_ts - use CONFIG_PM_SLEEP Input: sentelic - report device's production serial number Input: tl6040-vibra - Device Tree support Input: evdev - properly handle read/write with count 0 ...
2012-05-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - some V4L2 API updates needed by embedded devices - DVB API extensions for ATSC-MH delivery system, used in US for mobile TV - new tuners for fc0011/0012/0013 and tua9001 - a new dvb driver for af9033/9035 - a new ATSC-MH frontend (lg2160) - new remote controller keymaps - Removal of a few legacy webcam driver that got replaced by gspca on several kernel versions ago - a new driver for Exynos 4/5 webcams(s5pp fimc-lite) - a new webcam sensor driver (smiapp) - a new video input driver for embedded (sta2x1xx) - several improvements, fixes, cleanups, etc inside the drivers. Manually fix up conflicts due to err() -> dev_err() conversion in drivers/staging/media/easycap/easycap_main.c * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (484 commits) [media] saa7134-cards: Remove a PCI entry added by mistake [media] radio-sf16fmi: add support for SF16-FMD [media] rc-loopback: remove duplicate line [media] patch for Asus My Cinema PS3-100 (1043:48cd) [media] au0828: Move the Kconfig knob under V4L_USB_DRIVERS [media] em28xx: simple comment fix [media] [resend] radio-sf16fmr2: add PnP support for SF16-FMD2 [media] smiapp: Use v4l2_ctrl_new_int_menu() instead of v4l2_ctrl_new_custom() [media] smiapp: Add support for 8-bit uncompressed formats [media] smiapp: Allow generic quirk registers [media] smiapp: Use non-binning limits if the binning limit is zero [media] smiapp: Initialise rval in smiapp_read_nvm() [media] smiapp: Round minimum pre_pll up rather than down in ip_clk_freq check [media] smiapp: Use 8-bit reads only before identifying the sensor [media] smiapp: Quirk for sensors that only do 8-bit reads [media] smiapp: Pass struct sensor to register writing commands instead of i2c_client [media] smiapp: Allow using external clock from the clock framework [media] zl10353: change .read_snr() to report SNR as a 0.1 dB [media] media: add support to gspca/pac7302.c for 093a:2627 (Genius FaceCam 300) [media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th try ...
2012-05-24Merge branch 'next' into for-linusDmitry Torokhov
2012-05-24Input: matrix-keymap - fix building keymapsDmitry Torokhov
Keymaps used by drivers based on matrix-keymap facilities are arrays of unsigned shorts, not chars. Treating them otherwise produces corrupted keymaps. Reported-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-22Merge tag 'usb-3.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB 3.5-rc1 changes from Greg Kroah-Hartman: "Here is the big USB 3.5-rc1 pull request for the 3.5-rc1 merge window. It's touches a lot of different parts of the kernel, all USB drivers, due to some API cleanups (getting rid of the ancient err() macro) and some changes that are needed for USB 3.0 power management updates. There are also lots of new drivers, pimarily gadget, but others as well. We deleted a staging driver, which was nice, and finally dropped the obsolete usbfs code, which will make Al happy to never have to touch that again. There were some build errors in the tree that linux-next found a few days ago, but those were fixed by the most recent changes (all were due to us not building with CONFIG_PM disabled.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (477 commits) xhci: Fix DIV_ROUND_UP compile error. xhci: Fix compile with CONFIG_USB_SUSPEND=n USB: Fix core compile with CONFIG_USB_SUSPEND=n brcm80211: Fix compile error for .disable_hub_initiated_lpm. Revert "USB: EHCI: work around bug in the Philips ISP1562 controller" MAINTAINERS: Add myself as maintainer to the USB PHY Layer USB: EHCI: fix command register configuration lost problem USB: Remove races in devio.c USB: ehci-platform: remove update_device USB: Disable hub-initiated LPM for comms devices. xhci: Add Intel U1/U2 timeout policy. xhci: Add infrastructure for host-specific LPM policies. USB: Add macros for interrupt endpoint types. xhci: Reserve one command for USB3 LPM disable. xhci: Some Evaluate Context commands must succeed. USB: Disable USB 3.0 LPM in critical sections. USB: Add support to enable/disable USB3 link states. USB: Allow drivers to disable hub-initiated LPM. USB: Calculate USB 3.0 exit latencies for LPM. USB: Refactor code to set LPM support flag. ... Conflicts: arch/arm/mach-exynos/mach-nuri.c arch/arm/mach-exynos/mach-universal_c210.c drivers/net/wireless/ath/ath6kl/usb.c
2012-05-20mfd: Convert wm831x to irq_domainMark Brown
The modern idiom is to use irq_domain to allocate interrupts. This is useful partly to allow further infrastructure to be based on the domains and partly because it makes it much easier to allocate virtual interrupts to devices as we don't need to allocate a contiguous range of interrupt numbers. Convert the wm831x driver over to this infrastructure, using a legacy IRQ mapping if an irq_base is specified in platform data and otherwise using a linear mapping, always registering the interrupts even if they won't ever be used. Only boards which need to use the GPIOs as interrupts should need to use an irq_base. This means that we can't use the MFD irq_base management since the unless we're using an explicit irq_base from platform data we can't rely on a linear mapping of interrupts. Instead we need to map things via the irq_domain - provide a conveniencem function wm831x_irq() to save a small amount of typing when doing so. Looking at this I couldn't clearly see anything the MFD core could do to make this nicer. Since we're not supporting device tree yet there's no meaningful advantage if we don't do this conversion in one, the fact that the interrupt resources are used for repeated IP blocks makes accessor functions for the irq_domain more trouble to do than they're worth. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-15Merge remote-tracking branch 'linus/master' into staging/for_v3.5Mauro Carvalho Chehab
* linus/master: (805 commits) tty: Fix LED error return openvswitch: checking wrong variable in queue_userspace_packet() bonding: Fix LACPDU rx_dropped commit. Linux 3.4-rc7 ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board ARM / mach-shmobile: Invalidate caches when booting secondary cores ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper MAINTAINERS: Add myself as the cpufreq maintainer dm mpath: check if scsi_dh module already loaded before trying to load dm thin: correct module description dm thin: fix unprotected use of prepared_discards list dm thin: reinstate missing mempool_free in cell_release_singleton gpio/exynos: Fix compiler warnings when non-exynos machines are selected gpio: pch9: Use proper flow type handlers powerpc/irq: Fix another case of lazy IRQ state getting out of sync ks8851: Update link status during link change interrupt ... Conflicts: drivers/media/common/tuners/xc5000.c drivers/media/common/tuners/xc5000.h drivers/usb/gadget/uvc_queue.c
2012-05-14[media] Input: move drivers/input/fixp-arith.h to include/linuxAntonio Ospite
Move drivers/input/fixp-arith.h to include/linux so that the functions defined there can be used by other subsystems, for instance some video devices ISPs can control the output HUE value by setting registers for sin(HUE) and cos(HUE). Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-11Input: spear-keyboard - add device tree bindingsViresh Kumar
This adds simple DT bindings for spear-keyboard controller. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: matrix-keymap - wire up device tree supportDmitry Torokhov
When platform keymap is not supplied to matrix_keypad_build_keymap() and device tree support is enabled, try locating specified property and load keymap from it. If property name is not defined, try using "linux,keymap". Based on earlier patch by Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: matrix-keymap - uninline and prepare for device tree supportDmitry Torokhov
Change matrix-keymap helper to be out-of-line, like sparse keymap, allow the helper perform basic keymap validation and return errors, and prepare for device tree support. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: adp5588 - add support for gpio namesJean-François Dagenais
Signed-off-by: Jean-François Dagenais <jeff.dagenais@gmail.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: omap-keypad - dynamically handle register offsetsPoddar, Sourav
Hi Dmitry, On Wed, May 9, 2012 at 3:14 PM, Poddar, Sourav <sourav.poddar@ti.com> wrote: > Hi Dmitry, > > I did some minor fixes to the patch which you suggested above and > the keypad is functional now. > > Changes: > - Move "pm_runtime_enable" before using "pm_runtime_get_sync". > > Sending the patch inlined..(also attached). > > From: G, Manjunath Kondaiah <manjugk@ti.com> > Date: Mon, 10 Oct 2011 20:52:05 +0530 > Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets > > Keypad controller register offsets are different for omap4 > and omap5. Handle these offsets through static mapping and > assign these mappings during run time. > > Tested on omap4430 sdp with 3.4-rc3. > Tested on omap5430evm with 3.1-custom kernel. > > Cc: Andrew Morton <akpm@linux-foundation.org> > Signed-off-by: Felipe Balbi <balbi@ti.com> > Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> > Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> > Signed-off-by: Dmitry Torokhov <dtor@mail.ru> > --- >  drivers/input/keyboard/Kconfig        |    4 +- >  drivers/input/keyboard/omap4-keypad.c |  120 +++++++++++++++++++++++++------- >  2 files changed, 95 insertions(+), 29 deletions(-) > > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index f354813..33bbdee 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -512,9 +512,9 @@ config KEYBOARD_OMAP >          module will be called omap-keypad. > >  config KEYBOARD_OMAP4 > -       tristate "TI OMAP4 keypad support" > +       tristate "TI OMAP4+ keypad support" >        help > -         Say Y here if you want to use the OMAP4 keypad. > +         Say Y here if you want to use the OMAP4+ keypad. > >          To compile this driver as a module, choose M here: the >          module will be called omap4-keypad. > diff --git a/drivers/input/keyboard/omap4-keypad.c > b/drivers/input/keyboard/omap4-keypad.c > index e809ac0..d7102e8 100644 > --- a/drivers/input/keyboard/omap4-keypad.c > +++ b/drivers/input/keyboard/omap4-keypad.c > @@ -68,19 +68,52 @@ > >  #define OMAP4_MASK_IRQSTATUSDISABLE    0xFFFF > > +enum { > +       KBD_REVISION_OMAP4 = 0, > +       KBD_REVISION_OMAP5, > +}; > + >  struct omap4_keypad { >        struct input_dev *input; > >        void __iomem *base; > -       int irq; > +       unsigned int irq; > >        unsigned int rows; >        unsigned int cols; > +       u32 reg_offset; > +       u32 irqreg_offset; >        unsigned int row_shift; >        unsigned char key_state[8]; >        unsigned short keymap[]; >  }; > > +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset) > +{ > +       return __raw_readl(keypad_data->base + > +                               keypad_data->reg_offset + offset); > +} > + > +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value) > +{ > +       __raw_writel(value, > +                    keypad_data->base + keypad_data->reg_offset + offset); > +} > + > +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset) > +{ > +       return __raw_readl(keypad_data->base + > +                               keypad_data->irqreg_offset + offset); > +} > + > +static void kbd_write_irqreg(struct omap4_keypad *keypad_data, > +                            u32 offset, u32 value) > +{ > +       __raw_writel(value, > +                    keypad_data->base + keypad_data->irqreg_offset + offset); > +} > + > + >  /* Interrupt handler */ >  static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) >  { > @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int > irq, void *dev_id) >        u32 *new_state = (u32 *) key_state; > >        /* Disable interrupts */ > -       __raw_writel(OMAP4_VAL_IRQDISABLE, > -                    keypad_data->base + OMAP4_KBD_IRQENABLE); > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, > +                        OMAP4_VAL_IRQDISABLE); > > -       *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0); > -       *(new_state + 1) = __raw_readl(keypad_data->base > -                                               + OMAP4_KBD_FULLCODE63_32); > +       *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); > +       *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); > >        for (row = 0; row < keypad_data->rows; row++) { >                changed = key_state[row] ^ keypad_data->key_state[row]; > @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int > irq, void *dev_id) >                sizeof(keypad_data->key_state)); > >        /* clear pending interrupts */ > -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), > -                       keypad_data->base + OMAP4_KBD_IRQSTATUS); > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, > +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); > >        /* enable interrupts */ > -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, > -                       keypad_data->base + OMAP4_KBD_IRQENABLE); > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, > +               OMAP4_DEF_IRQENABLE_EVENTEN | > +                               OMAP4_DEF_IRQENABLE_LONGKEY); > >        return IRQ_HANDLED; >  } > @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input) > >        disable_irq(keypad_data->irq); > > -       __raw_writel(OMAP4_VAL_FUNCTIONALCFG, > -                       keypad_data->base + OMAP4_KBD_CTRL); > -       __raw_writel(OMAP4_VAL_DEBOUNCINGTIME, > -                       keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME); > -       __raw_writel(OMAP4_VAL_IRQDISABLE, > -                       keypad_data->base + OMAP4_KBD_IRQSTATUS); > -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, > -                       keypad_data->base + OMAP4_KBD_IRQENABLE); > -       __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA, > -                       keypad_data->base + OMAP4_KBD_WAKEUPENABLE); > +       kbd_writel(keypad_data, OMAP4_KBD_CTRL, > +                       OMAP4_VAL_FUNCTIONALCFG); > +       kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME, > +                       OMAP4_VAL_DEBOUNCINGTIME); > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, > +                       OMAP4_VAL_IRQDISABLE); > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, > +                       OMAP4_DEF_IRQENABLE_EVENTEN | > +                               OMAP4_DEF_IRQENABLE_LONGKEY); > +       kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, > +                       OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA); > >        enable_irq(keypad_data->irq); > > @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input) >        disable_irq(keypad_data->irq); > >        /* Disable interrupts */ > -       __raw_writel(OMAP4_VAL_IRQDISABLE, > -                    keypad_data->base + OMAP4_KBD_IRQENABLE); > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, > +                        OMAP4_VAL_IRQDISABLE); > >        /* clear pending interrupts */ > -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), > -                       keypad_data->base + OMAP4_KBD_IRQSTATUS); > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, > +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); > >        enable_irq(keypad_data->irq); > > @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct > platform_device *pdev) >        struct resource *res; >        resource_size_t size; >        unsigned int row_shift, max_keys; > +       int rev; >        int irq; >        int error; > > @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct > platform_device *pdev) >        keypad_data->rows = pdata->rows; >        keypad_data->cols = pdata->cols; > > +       /* > +       * Enable clocks for the keypad module so that we can read > +       * revision register. > +       */ > +       pm_runtime_enable(&pdev->dev); > +       error = pm_runtime_get_sync(&pdev->dev); > +       if (error) { > +               dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n"); > +               goto err_unmap; > +       } > +       rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION); > +       rev &= 0x03 << 30; > +       rev >>= 30; > +       switch (rev) { > +       case KBD_REVISION_OMAP4: > +               keypad_data->reg_offset = 0x00; > +               keypad_data->irqreg_offset = 0x00; > +               break; > +       case KBD_REVISION_OMAP5: > +               keypad_data->reg_offset = 0x10; > +               keypad_data->irqreg_offset = 0x0c; > +               break; > +       default: > +               dev_err(&pdev->dev, > +                       "Keypad reports unsupported revision %d", rev); > +               error = -EINVAL; > +               goto err_pm_put_sync; > +       } > + >        /* input device allocation */ >        keypad_data->input = input_dev = input_allocate_device(); >        if (!input_dev) { >                error = -ENOMEM; > -               goto err_unmap; > +               goto err_pm_put_sync; >        } > >        input_dev->name = pdev->name; > @@ -273,14 +337,14 @@ static int __devinit omap4_keypad_probe(struct > platform_device *pdev) >                        input_dev->keycode, input_dev->keybit); > >        error = request_irq(keypad_data->irq, omap4_keypad_interrupt, > -                            IRQF_TRIGGER_RISING, > +                           IRQF_DISABLED | IRQF_TRIGGER_RISING, Sorry, " IRQF_DISABLED" got included by mistake. Removing this stray change and sending it again. >                             "omap4-keypad", keypad_data); >        if (error) { >                dev_err(&pdev->dev, "failed to register interrupt\n"); >                goto err_free_input; >        } > > -       pm_runtime_enable(&pdev->dev); > +       pm_runtime_put_sync(&pdev->dev); > >        error = input_register_device(keypad_data->input); >        if (error < 0) { > @@ -296,6 +360,8 @@ err_pm_disable: >        free_irq(keypad_data->irq, keypad_data); >  err_free_input: >        input_free_device(input_dev); > +err_pm_put_sync: > +       pm_runtime_put_sync(&pdev->dev); >  err_unmap: >        iounmap(keypad_data->base); >  err_release_mem: > > > ~Sourav > > On Wed, May 9, 2012 at 1:15 PM, Dmitry Torokhov > <dmitry.torokhov@gmail.com> wrote: >>> Hi Dmitry , >>> >>> >>> On Wed, May 9, 2012 at 10:48 AM, Dmitry Torokhov >>> <dmitry.torokhov@gmail.com> wrote: >>> > Ho Sourav, >>> > >>> > On Thu, Apr 26, 2012 at 11:24:37AM +0530, Sourav Poddar wrote: >>> >> >>> >> -config KEYBOARD_OMAP4 >>> >> -     tristate "TI OMAP4 keypad support" >>> >> +config KEYBOARD_OMAP4+ >>> > >>> > I think this works purely by accident - '+' sign getting dropped by >>> > parser... >>> > >>> >> @@ -139,16 +192,33 @@ static int omap4_keypad_open(struct input_dev *input) >>> >> >>> >>       disable_irq(keypad_data->irq); >>> >> >>> >> -     __raw_writel(OMAP4_VAL_FUNCTIONALCFG, >>> >> -                     keypad_data->base + OMAP4_KBD_CTRL); >>> >> -     __raw_writel(OMAP4_VAL_DEBOUNCINGTIME, >>> >> -                     keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME); >>> >> -     __raw_writel(OMAP4_VAL_IRQDISABLE, >>> >> -                     keypad_data->base + OMAP4_KBD_IRQSTATUS); >>> >> -     __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, >>> >> -                     keypad_data->base + OMAP4_KBD_IRQENABLE); >>> >> -     __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA, >>> >> -                     keypad_data->base + OMAP4_KBD_WAKEUPENABLE); >>> >> +     keypad_data->revision = kbd_read_revision(keypad_data, >>> >> +                     OMAP4_KBD_REVISION); >>> >> +     switch (keypad_data->revision) { >>> >> +     case 1: >>> >> +             keypad_data->irqstatus = OMAP4_KBD_IRQSTATUS + 0x0c; >>> >> +             keypad_data->irqenable = OMAP4_KBD_IRQENABLE + 0x0c; >>> >> +             keypad_data->reg_offset = 0x10; >>> >> +             break; >>> > >>> > This should be done in probe(). >>> > >>> Dont we then require "pm_runtime_put_sync" in probe, since we are trying >>> to read the keypad revision register.? >> >> Ah, indeed, but I think not pm_runtime_get_sync() but >> pm_runtime_set_active(). >> >> Not sure if this will fix the crash... >> >> -- >> Dmitry >> >> >> Input: omap-keypad - dynamically handle register offsets >> >> From: G, Manjunath Kondaiah <manjugk@ti.com> >> >> Keypad controller register offsets are different for omap4 >> and omap5. Handle these offsets through static mapping and >> assign these mappings during run time. >> >> Tested on omap4430 sdp with 3.4-rc3. >> Tested on omap5430evm with 3.1-custom kernel. >> >> Signed-off-by: Felipe Balbi <balbi@ti.com> >> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> >> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> >> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> >> --- >> >>  drivers/input/keyboard/Kconfig        |    4 + >>  drivers/input/keyboard/omap4-keypad.c |  117 ++++++++++++++++++++++++++------- >>  2 files changed, 94 insertions(+), 27 deletions(-) >> >> >> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig >> index 20a3753..84ee155 100644 >> --- a/drivers/input/keyboard/Kconfig >> +++ b/drivers/input/keyboard/Kconfig >> @@ -531,9 +531,9 @@ config KEYBOARD_OMAP >>          module will be called omap-keypad. >> >>  config KEYBOARD_OMAP4 >> -       tristate "TI OMAP4 keypad support" >> +       tristate "TI OMAP4+ keypad support" >>        help >> -         Say Y here if you want to use the OMAP4 keypad. >> +         Say Y here if you want to use the OMAP4+ keypad. >> >>          To compile this driver as a module, choose M here: the >>          module will be called omap4-keypad. >> diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c >> index e809ac0..c9fd0df 100644 >> --- a/drivers/input/keyboard/omap4-keypad.c >> +++ b/drivers/input/keyboard/omap4-keypad.c >> @@ -68,19 +68,52 @@ >> >>  #define OMAP4_MASK_IRQSTATUSDISABLE    0xFFFF >> >> +enum { >> +       KBD_REVISION_OMAP4 = 0, >> +       KBD_REVISION_OMAP5, >> +}; >> + >>  struct omap4_keypad { >>        struct input_dev *input; >> >>        void __iomem *base; >> -       int irq; >> +       unsigned int irq; >> >>        unsigned int rows; >>        unsigned int cols; >> +       u32 reg_offset; >> +       u32 irqreg_offset; >>        unsigned int row_shift; >>        unsigned char key_state[8]; >>        unsigned short keymap[]; >>  }; >> >> +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset) >> +{ >> +       return __raw_readl(keypad_data->base + >> +                               keypad_data->reg_offset + offset); >> +} >> + >> +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value) >> +{ >> +       __raw_writel(value, >> +                    keypad_data->base + keypad_data->reg_offset + offset); >> +} >> + >> +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset) >> +{ >> +       return __raw_readl(keypad_data->base + >> +                               keypad_data->irqreg_offset + offset); >> +} >> + >> +static void kbd_write_irqreg(struct omap4_keypad *keypad_data, >> +                            u32 offset, u32 value) >> +{ >> +       __raw_writel(value, >> +                    keypad_data->base + keypad_data->irqreg_offset + offset); >> +} >> + >> + >>  /* Interrupt handler */ >>  static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) >>  { >> @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) >>        u32 *new_state = (u32 *) key_state; >> >>        /* Disable interrupts */ >> -       __raw_writel(OMAP4_VAL_IRQDISABLE, >> -                    keypad_data->base + OMAP4_KBD_IRQENABLE); >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, >> +                        OMAP4_VAL_IRQDISABLE); >> >> -       *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0); >> -       *(new_state + 1) = __raw_readl(keypad_data->base >> -                                               + OMAP4_KBD_FULLCODE63_32); >> +       *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); >> +       *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); >> >>        for (row = 0; row < keypad_data->rows; row++) { >>                changed = key_state[row] ^ keypad_data->key_state[row]; >> @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) >>                sizeof(keypad_data->key_state)); >> >>        /* clear pending interrupts */ >> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), >> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS); >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, >> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); >> >>        /* enable interrupts */ >> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, >> -                       keypad_data->base + OMAP4_KBD_IRQENABLE); >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, >> +               OMAP4_DEF_IRQENABLE_EVENTEN | >> +                               OMAP4_DEF_IRQENABLE_LONGKEY); >> >>        return IRQ_HANDLED; >>  } >> @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input) >> >>        disable_irq(keypad_data->irq); >> >> -       __raw_writel(OMAP4_VAL_FUNCTIONALCFG, >> -                       keypad_data->base + OMAP4_KBD_CTRL); >> -       __raw_writel(OMAP4_VAL_DEBOUNCINGTIME, >> -                       keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME); >> -       __raw_writel(OMAP4_VAL_IRQDISABLE, >> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS); >> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, >> -                       keypad_data->base + OMAP4_KBD_IRQENABLE); >> -       __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA, >> -                       keypad_data->base + OMAP4_KBD_WAKEUPENABLE); >> +       kbd_writel(keypad_data, OMAP4_KBD_CTRL, >> +                       OMAP4_VAL_FUNCTIONALCFG); >> +       kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME, >> +                       OMAP4_VAL_DEBOUNCINGTIME); >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, >> +                       OMAP4_VAL_IRQDISABLE); >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, >> +                       OMAP4_DEF_IRQENABLE_EVENTEN | >> +                               OMAP4_DEF_IRQENABLE_LONGKEY); >> +       kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, >> +                       OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA); >> >>        enable_irq(keypad_data->irq); >> >> @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input) >>        disable_irq(keypad_data->irq); >> >>        /* Disable interrupts */ >> -       __raw_writel(OMAP4_VAL_IRQDISABLE, >> -                    keypad_data->base + OMAP4_KBD_IRQENABLE); >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, >> +                        OMAP4_VAL_IRQDISABLE); >> >>        /* clear pending interrupts */ >> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), >> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS); >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, >> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); >> >>        enable_irq(keypad_data->irq); >> >> @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev) >>        struct resource *res; >>        resource_size_t size; >>        unsigned int row_shift, max_keys; >> +       int rev; >>        int irq; >>        int error; >> >> @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev) >>        keypad_data->rows = pdata->rows; >>        keypad_data->cols = pdata->cols; >> >> +       /* >> +        * Mark device as active (and wake up its parent) so we can read >> +        * revision register. >> +        */ >> +       error = pm_runtime_set_active(&pdev->dev); >> +       if (error) { >> +               dev_err(&pdev->dev, "pm_runtime_set_active() failed\n"); >> +               goto err_unmap; >> +       } >> + >> +       rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION); >> +       rev &= 0x03 << 30; >> +       rev >>= 30; >> +       switch (rev) { >> +       case KBD_REVISION_OMAP4: >> +               keypad_data->reg_offset = 0x00; >> +               keypad_data->irqreg_offset = 0x00; >> +               break; >> +       case KBD_REVISION_OMAP5: >> +               keypad_data->reg_offset = 0x10; >> +               keypad_data->irqreg_offset = 0x0c; >> +               break; >> +       default: >> +               dev_err(&pdev->dev, >> +                       "Keypad reports unsupported revision %d", rev); >> +               error = -EINVAL; >> +               goto err_pm_suspended; >> +       } >> + >>        /* input device allocation */ >>        keypad_data->input = input_dev = input_allocate_device(); >>        if (!input_dev) { >>                error = -ENOMEM; >> -               goto err_unmap; >> +               goto err_pm_suspended; >>        } >> >>        input_dev->name = pdev->name; >> @@ -281,6 +345,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev) >>        } >> >>        pm_runtime_enable(&pdev->dev); >> +       pm_runtime_put_sync(&pdev->dev); >> >>        error = input_register_device(keypad_data->input); >>        if (error < 0) { >> @@ -296,6 +361,8 @@ err_pm_disable: >>        free_irq(keypad_data->irq, keypad_data); >>  err_free_input: >>        input_free_device(input_dev); >> +err_pm_suspended: >> +       pm_runtime_set_suspended(&pdev->dev); >>  err_unmap: >>        iounmap(keypad_data->base); >>  err_release_mem: From: G, Manjunath Kondaiah <manjugk@ti.com> Date: Mon, 10 Oct 2011 20:52:05 +0530 Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets Keypad controller register offsets are different for omap4 and omap5. Handle these offsets through static mapping and assign these mappings during run time. Tested on omap4430 sdp with 3.4-rc3. Tested on omap5430evm with 3.1-custom kernel. Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: synaptics - fix compile warningJJ Ding
Move synaptics_invert_y() inside CONFIG_MOUSE_PS2_SYNAPTICS to get rid of a compile warning when we don't select synaptics support. drivers/input/mouse/synaptics.c:53:12: warning: ‘synaptics_invert_y’ defined but not used [-Wunused-function] Signed-off-by: JJ Ding <dgdunix@gmail.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: ALPS - switch to using input_mt_report_finger_countDmitry Torokhov
Instead of open-coded reporting number of fingers on the touchpad let's use input_mt_report_finger_count() helper. Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: ALPS - add semi-MT support for v4 protocolGeorge Pantalos
This patch adds semi-MT support for ALPS v4 protocol touchpads. It is based on the work by Seth Forshee for ALPS v3 and v4 protocol support. Three packets are required to assemble and process the MT data. ST events are reported at once to avoid latency. If there were two contacts or more, report MT data instead of ST events. Thanks to Seth Forshee for providing most of the code, guidance and insight for producing this patch. Signed-off-by: George Pantalos <gpantalos@gmail.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driverPaul Parsons
This driver adds support for the Synaptics NavPoint touchpad connected to a PXA27x SSP port in SPI slave mode. The device emulates a mouse; a tap or tap-and-a-half drag gesture emulates the left mouse button. For example, use the xf86-input-evdev driver for an X pointing device. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Tested-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: atmel_mxt_ts - dump each message on just 1 lineDaniel Kurtz
Helps ensure all bytes for a single message together in the system log. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: atmel_mxt_ts - do not read extra (checksum) byteDaniel Kurtz
atmel_mxt devices will send a checksum byte at the end of a message if the MSB of the object address is set. However, since this driver does not set this bit, the checksum byte isn't actually sent, so don't even try to read it. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: atmel_mxt_ts - verify object size in mxt_write_objectDaniel Kurtz
Don't allow writing past the length of an object. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: atmel_mxt_ts - only allow root to update firmwareDaniel Kurtz
Restrict permissions on the update_fw sysfs entry to read only for root only. Also, update object permission to use a macro S_IRUGO macro instead of hard coded 0444. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: atmel_mxt_ts - use CONFIG_PM_SLEEPDaniel Kurtz
Simple cleanup to use newer PM APIs. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: sentelic - report device's production serial numberTai-hwa Liang
Hardware since Cx supports an unique identity (used to identify OEM vendors and released lot number) which is very helpful for diagnostic purpose. This revision tries to make it as a part of driver boot up message. Whilst here, also bumping fsp_drv_ver to acknowledge recent addition of absolute coordinates output. Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: tl6040-vibra - Device Tree supportPeter Ujfalusi
Enable DT based probing of the vibra driver. Example of dts section to load the twl6040-vibra driver: twl6040: twl6040@4b { ... twl6040_vibra: twl6040@1 { compatible = "ti,twl6040-vibra"; interrupts = <4>; vddvibl-supply = <&vbat>; vddvibr-supply = <&vbat>; vibldrv_res = <8>; vibrdrv_res = <3>; viblmotor_res = <10>; vibrmotor_res = <10>; }; }; [Sasha Levin <levinsasha928@gmail.com>: fixed build error] Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10Merge tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci into ↵Olof Johansson
next/drivers DaVinci SoC updates for v3.5 This pull request updates the DaVinci SoC support to implement DEBUG_LL port choice and optimizes the DMA ISR by removing unnecessary register reads. * tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci: ARM: davinci: optimize the DMA ISR ARM: davinci: implement DEBUG_LL port choice + sync with Linux 3.4-rc6 Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-09Merge tag 'v3.4-rc6' into next/cleanupOlof Johansson
Linux 3.4-rc6 Resolve conflict where an u5500 file had a bugfix go in, but was deleted in the branch staged for next merge window. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-07Merge 3.4-rc6 into usb-nextGreg Kroah-Hartman
This resolves the conflict with: drivers/usb/host/ehci-tegra.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: appletouch: fix up compiler warningGreg Kroah-Hartman
My last patch fixing up the dev_* messages caused a compiler warning accidentally for an unused variable. Fix this up, as it was my fault. Cc: Alessandro Rubini <rubini@ipvvis.unipv.it> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: usbtouchscreen.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Henrik Rydberg <rydberg@euromail.se> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Viresh Kumar <viresh.kumar@st.com> CC: Armando Visconti <armando.visconti@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: wacom_sys.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Ping Cheng <pingc@wacom.com> CC: Chris Bagwell <chris@cnpbagwell.com> CC: Eduard Hasenleithner <eduard@hasenleithner.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: kbtab.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: gtco.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: aiptek.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Jesper Juhl <jj@chaosbits.net> CC: JJ Ding <dgdunix@gmail.com> CC: Edwin van Vliet <edwin@cheatah.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: acecad.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: bcm5974.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Henrik Rydberg <rydberg@euromail.se> CC: Alessandro Rubini <rubini@ipvvis.unipv.it> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: appletouch.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Alessandro Rubini <rubini@ipvvis.unipv.it> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: yealink.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Henk Vergonet <Henk.Vergonet@gmail.com> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: powermate.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: keyspan_remote.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: cm109.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Axel Lin <axel.lin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: xpad.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: "Magnus Hörlin" <magnus@alefors.se> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: iforce: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02Merge tag 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Arnd Bergmann
next/cleanup From: Sascha Hauer <s.hauer@pengutronix.de> ARM: i.MX cleanups for 3.5 * tag 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6: (5 commits) ARM: mx53: fix pad definitions for MX53_PAD_EIM_D28__I2C1_SDA and MX53_PAD_GPIO_8__CAN1_RXCAN ARM: imx/eukrea_mbimx27-baseboard: fix typo in error message ARM: i.MX51 iomux: add missed definitions for SION-bit and mode for some pads arm: imx: add missing select IMX_HAVE_PLATFORM for MACH_MX35_3DS in Kconfig arm: imx: make various struct sys_timer static Includes an update to 3.4-rc4 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-02Input: evdev - properly handle read/write with count 0Dmitry Torokhov
According to the standard count 0 is special - no IO should happen but we can check error conditions (device gone away, etc), and return 0 if there are no errors. We used to return -EINVAL instead and we also could return 0 if an event was "stolen" by another thread. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02Input: evdev - properly access RCU-protected 'grab' dataDmitry Torokhov
We should use rcu_dereference_protected() when checking if given client is the one that grabbed the device. This fixes warnings produced by sparse. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02Input: mpu3050 - set IRQF_ONESHOT when requesting the interruptStephen Warren
Commit 1c6c695 "genirq: Reject bogus threaded irq requests" requires that request_threaded_irq() either be passed an explicit handler, or that IRQF_ONESHOT be set. Set this flag. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02Input: serio_raw - signal EFAULT even if read/write partially succeedsDmitry Torokhov
When copy_to/from_user fails in the middle of transfer we should not report to the user that read/write partially succeeded but rather report -EFAULT right away, so that application will know that it got its buffers all wrong. If application messed up its buffers we can't trust the data fetched from userspace and successfully written to the device or if data read from the device and transferred to userspace ended up where application expected it to end. If serio_write() fails we still going to report partial writes if failure happens in the middle of the transfer. This is basically a revert of 7a0a27d2ce38aee19a31fee8c12095f586eed393 and 4fa0771138d0b56fe59ab8ab3b1ce9e594484362. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>