summaryrefslogtreecommitdiff
path: root/drivers/iommu
AgeCommit message (Collapse)Author
2012-12-01Merge tag 'omap-for-v3.8/cleanup-headers-iommu-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup From Tony Lindgren: Move most of remaining omap iommu code to drivers/iommu. This is needed for the multiplatform kernels as the plat and mach headers cannot be included. These changes were agreed to be merged via the arm-soc tree by Joerg and Ohad as these will cause some merge conflicts with the other related clean-up branches. So omap-for-v3.8/cleanup-headers-iommu should be added as one of the depends branches for arm-soc. * tag 'omap-for-v3.8/cleanup-headers-iommu-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h Conflicts due to surrounding changes fixed up in: arch/arm/mach-omap2/omap_hwmod_44xx_data.c drivers/media/platform/omap3isp/ispvideo.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-26Merge tag 'v3.7-rc7' into next/cleanupOlof Johansson
Merging in mainline back to next/cleanup since it has collected a few conflicts between fixes going upstream and some of the cleanup patches. Git doesn't auto-resolve some of them, and they're mostly noise so let's take care of it locally. Conflicts are in: arch/arm/mach-omap2/omap_hwmod_44xx_data.c arch/arm/plat-omap/i2c.c drivers/video/omap2/dss/dss.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20ARM: OMAP2+: Move iommu/iovmm headers to platform_dataTony Lindgren
Move iommu/iovmm headers from plat/ to platform_data/ as part of the single zImage work. Partially based on an earlier version by Ido Yariv <ido@wizery.com>. Cc: Ido Yariv <ido@wizery.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-20ARM: OMAP2+: Make some definitions localIdo Yariv
Move some of the definitions in omap-iommu.h that can be made local to either drivers/iommu. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Signed-off-by: Ido Yariv <ido@wizery.com> Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Joerg Roedel <joro@8bytes.org> [tony@atomide.com: updated for header changes in the series] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-20ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.cTony Lindgren
This file should not be in arch/arm. Move it to drivers/iommu to allow making most of the header local to drivers/iommu. This is needed as we are removing plat and mach includes from drivers for ARM common zImage support. Cc: Ido Yariv <ido@wizery.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: linux-media@vger.kernel.org Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-20ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.hTony Lindgren
Looks like the iommu framework does not have generic functions exported for all the needs yet. The hardware specific functions are defined in files like intel-iommu.h and amd-iommu.h. Follow the same standard for omap-iommu.h. This is needed because we are removing plat and mach includes for ARM common zImage support. Further work should continue in the iommu framework context as only pure platform data will be communicated from arch/arm/*omap*/* code to the iommu framework. Cc: Ido Yariv <ido@wizery.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: linux-media@vger.kernel.org Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-20ARM: OMAP2+: Move iopgtable header to drivers/iommu/Ido Yariv
The iopgtable header file is only used by the iommu & iovmm drivers, so move it to drivers/iommu/, as part of the single zImage effort. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Signed-off-by: Ido Yariv <ido@wizery.com> Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Joerg Roedel <joro@8bytes.org> [tony@atomide.com: updated to be earlier in the series] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-17intel-iommu: Fix lookup in add deviceAlex Williamson
We can't assume this device exists, fall back to the bridge itself. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Matthew Thode <prometheanfire@gentoo.org> Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <joro@8bytes.org>
2012-11-17iommu/tegra-smmu.c: fix dentry reference leak in smmu_debugfs_stats_show().Cyril Roelandt
Call to d_find_alias() needs a corresponding dput(). Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2012-11-05ARM: tegra: move tegra-ahb.h out of arch/arm/mach-tegra/Stephen Warren
We wish to empty arch/arm/mach-tegra/include/mach/ as much as possible to enable single zImage. Move tegra-ahb.h to a more central location (suggested by Arnd, OK'd by Greg KH), and actually make tegra-ahb.c include the header to ensure client and provider agree on the prototype. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-05iommu: tegra: remove include of <mach/iomap.h>Stephen Warren
Nothing from this file is used, and the file will hopefully be deleted soon. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Joerg Roedel <joerg.roedel@amd.com>
2012-10-24iommu/tegra: smmu: Fix deadly typoHiro Sugawara
Fix a deadly typo in macro definition. Cc: stable@vger.kernel.org Signed-off-by: Hiro Sugawara <hsugawara@nvidia.com> Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-10-16iommu/amd: Work around wrong IOAPIC device-id in IVRS tableJoerg Roedel
On some systems the BIOS puts the wrong device-id for the IO-APIC into the IVRS table. The result is that interrupt remapping is not working for the IO-APIC irqs. This usually means a kernel panic at boot because the timer is not working. Fix this kernel panic by disabling interrupt remapping if this problem is discovered in the IVRS table. Reported-by: Andrew Oakley <andrew@ado.is-a-geek.net> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-10-07Merge tag 'iommu-updates-v3.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "This time the IOMMU updates contain a bunch of fixes and cleanups to various IOMMU drivers and the DMA debug code. New features are the code for IRQ remapping support with the AMD IOMMU (preperation for that was already merged in the last release) and a debugfs interface to export some statistics in the NVidia Tegra IOMMU driver." * tag 'iommu-updates-v3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (27 commits) iommu/amd: Remove obsolete comment line dma-debug: Remove local BUS_NOTIFY_UNBOUND_DRIVER define iommu/amd: Fix possible use after free in get_irq_table() iommu/amd: Report irq remapping through IOMMU-API iommu/amd: Print message to system log when irq remapping is enabled iommu/irq: Use amd_iommu_irq_ops if supported iommu/amd: Make sure irq remapping still works on dma init failure iommu/amd: Add initialization routines for AMD interrupt remapping iommu/amd: Add call-back routine for HPET MSI iommu/amd: Implement MSI routines for interrupt remapping iommu/amd: Add IOAPIC remapping routines iommu/amd: Add routines to manage irq remapping tables iommu/amd: Add IRTE invalidation routine iommu/amd: Make sure IOMMU is not considered to translate itself iommu/amd: Split device table initialization into irq and dma part iommu/amd: Check if IOAPIC information is correct iommu/amd: Allocate data structures to keep track of irq remapping tables iommu/amd: Add slab-cache for irq remapping tables iommu/amd: Keep track of HPET and IOAPIC device ids iommu/amd: Fix features reporting ...
2012-10-02Merge branches 'dma-debug', 'iommu/fixes', 'arm/tegra', 'arm/exynos', ↵Joerg Roedel
'x86/amd', 'x86/vt-d' and 'x86/amd-irq-remapping' into next Conflicts: drivers/iommu/amd_iommu_init.c
2012-10-02iommu/amd: Remove obsolete comment lineJoerg Roedel
IRQ_DELAYED_DISABLE does not exist anymore. So this comment is obsolete. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-10-02iommu/amd: Fix possible use after free in get_irq_table()Dan Carpenter
We should return NULL on error instead of the freed pointer. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-10-01Merge tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi) - Clear host bridge resource info to avoid issue when releasing (Yinghai Lu) - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu) - Use standard list ops for acpi_pci_drivers (Jiang Liu) Device hotplug - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang Liu) - Remove fakephp driver (Bjorn Helgaas) - Fix VGA ref count in hotplug remove path (Yinghai Lu) - Allow acpiphp to handle PCIe ports without native hotplug (Jiang Liu) - Implement resume regardless of pciehp_force param (Oliver Neukum) - Make pci_fixup_irqs() work after init (Thierry Reding) Miscellaneous - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang) - Factor out PCI Express Capability accessors (Jiang Liu) - Add pcibios_window_alignment() so powerpc EEH can use generic resource assignment (Gavin Shan) - Make pci_error_handlers const (Stephen Hemminger) - Cleanup drivers/pci/remove.c (Bjorn Helgaas) - Improve Vendor-Specific Extended Capability support (Bjorn Helgaas) - Use standard list ops for bus->devices (Bjorn Helgaas) - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang) - Reassign invalid bus number ranges (Intel DP43BF workaround) (Yinghai Lu)" * tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits) PCI: acpiphp: Handle PCIe ports without native hotplug capability PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots PCI/ACPI: Protect acpi_pci_roots list with mutex PCI/ACPI: Use acpi_pci_root info rather than looking it up again PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface PCI/ACPI: Protect acpi_pci_drivers list with mutex PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges PCI/ACPI: Use normal list for struct acpi_pci_driver PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots PCI: Fix default vga ref_count ia64/PCI: Clear host bridge aperture struct resource x86/PCI: Clear host bridge aperture struct resource PCI: Stop all children first, before removing all children Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()" PCI: Provide a default pcibios_update_irq() PCI: Discard __init annotations for pci_fixup_irqs() and related functions PCI: Use correct type when freeing bus resource list PCI: Check P2P bridge for invalid secondary/subordinate range PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot() ...
2012-09-28iommu/amd: Report irq remapping through IOMMU-APIJoerg Roedel
Report the availability of irq remapping through the IOMMU-API to allow KVM device passthrough again without additional module parameter overrides. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Print message to system log when irq remapping is enabledJoerg Roedel
Print an indicator to dmesg to easily find out if interrupt remapping is enabled of a given system. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/irq: Use amd_iommu_irq_ops if supportedJoerg Roedel
Finally enable interrupt remapping for AMD systems. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Make sure irq remapping still works on dma init failureJoerg Roedel
Do not deinitialize the AMD IOMMU driver completly when interrupt remapping is already in use but the initialization of the DMA layer fails for some reason. Make sure the IOMMU can still be used to remap interrupts. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Add initialization routines for AMD interrupt remappingJoerg Roedel
Add the six routines required to setup interrupt remapping with the AMD IOMMU. Also put it all together into the AMD specific irq_remap_ops. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Add call-back routine for HPET MSIJoerg Roedel
Add a routine to setup a HPET MSI interrupt for remapping. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Implement MSI routines for interrupt remappingJoerg Roedel
Add routines to setup interrupt remapping for MSI interrupts. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Add IOAPIC remapping routinesJoerg Roedel
Add the routine to setup interrupt remapping for ioapic interrupts. Also add a routine to change the affinity of an irq and to free an irq allocation for interrupt remapping. The last two functions will also be used for MSI interrupts. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Add routines to manage irq remapping tablesJoerg Roedel
Add routines to: * Alloc remapping tables and single entries from these tables * Change entries in the tables * Free entries in the table Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Add IRTE invalidation routineJoerg Roedel
Add routine to invalidate the IOMMU cache for interupt translations. Also include the IRTE caches when flushing all IOMMU caches. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Make sure IOMMU is not considered to translate itselfJoerg Roedel
The IVRS table usually includes the IOMMU device. But the IOMMU does never translate itself, so make sure the IOMMU driver knows this. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Split device table initialization into irq and dma partJoerg Roedel
When the IOMMU is enabled very early (as with irq-remapping) some devices are still in BIOS hand. When dma is blocked early this can cause lots of IO_PAGE_FAULTs. So delay the DMA initialization and do it right before the dma_ops are initialized. To be secure, block all interrupts by default when irq-remapping is enabled in the system. They will be reenabled on demand later. Without blocking interrupts by default devices can issue arbitrary interrupts by sending special DMA packets to the CPU that look like MSI messages. This is especially dangerous when a device is assigned to a KVM guest because the guest can then DoS the host. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Check if IOAPIC information is correctJoerg Roedel
When the IOAPIC information provided in the IVRS table is not correct or not complete the system may not boot at all when interrupt remapping is enabled. So check if this information is correct and print out a firmware bug message when it is not. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Allocate data structures to keep track of irq remapping tablesJoerg Roedel
To easily map device ids to interrupt remapping table entries a new lookup table is necessary. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Add slab-cache for irq remapping tablesJoerg Roedel
The irq remapping tables for the AMD IOMMU need to be aligned on a 128 byte boundary. Create a seperate slab-cache to guarantee this alignment. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Keep track of HPET and IOAPIC device idsJoerg Roedel
The IVRS ACPI table provides information about the IOAPICs and the HPETs available in the system and which PCI device ID they use in transactions. Save that information for later usage in interrupt remapping. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-28iommu/amd: Fix features reportingBorislav Petkov
When the AMD IOMMU doesn't have extended features, an empty line gets issued in dmesg like so: [ 3.061417] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 3.066757] <--- [ 3.068294] pci 0000:00:00.2: irq 72 for MSI/MSI-X [ 3.081213] AMD-Vi: Lazy IO/TLB flushing enabled Fix it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28iommu/amd: Fix wrong assumption in iommu-group specific codeJoerg Roedel
The new IOMMU groups code in the AMD IOMMU driver makes the assumption that there is a pci_dev struct available for all device-ids listed in the IVRS ACPI table. Unfortunatly this assumption is not true and so this code causes a NULL pointer dereference at boot on some systems. Fix it by making sure the given pointer is never NULL when passed to the group specific code. The real fix is larger and will be queued for v3.7. Reported-by: Florian Dazinger <florian@dazinger.net> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-18intel-iommu: Default to non-coherent for domains unattached to iommusAlex Williamson
domain_update_iommu_coherency() currently defaults to setting domains as coherent when the domain is not attached to any iommus. This allows for a window in domain_context_mapping_one() where such a domain can update context entries non-coherently, and only after update the domain capability to clear iommu_coherency. This can be seen using KVM device assignment on VT-d systems that do not support coherency in the ecap register. When a device is added to a guest, a domain is created (iommu_coherency = 0), the device is attached, and ranges are mapped. If we then hot unplug the device, the coherency is updated and set to the default (1) since no iommus are attached to the domain. A subsequent attach of a device makes use of the same dmar domain (now marked coherent) updates context entries with coherency enabled, and only disables coherency as the last step in the process. To fix this, switch domain_update_iommu_coherency() to use the safer, non-coherent default for domains not attached to iommus. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Donald Dutile <ddutile@redhat.com> Acked-by: Donald Dutile <ddutile@redhat.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-18iommu/exynos: use list_del_init instead of list_del/INIT_LIST_HEADWei Yongjun
Using list_del_init() instead of list_del() + INIT_LIST_HEAD(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-18dma: tegra: move smmu.h into SMMU driverStephen Warren
There's no need to place these defines into arch/arm/mach-tegra/include/. Move them into the SMMU driver to clean up mach-tegra, as a pre-requisite for single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com> Cc: Hiroshi Doyu <hdoyu@nvidia.com> Acked-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-18iommu/tegra: smmu: Use debugfs_create_dir for directoryHiroshi Doyu
The commit c3b1a35 "debugfs: make sure that debugfs_create_file() gets used only for regulars" doesn't allow to use debugfs_create_file() for dir. Keep debugfs data in smmu_device instead of directory's i_private. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-18iommu/amd: Fix some typosFrank Arnold
Fix some typos in comments and user-visible messages. No functional changes. Signed-off-by: Frank Arnold <frank.arnold@amd.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-18iommu/amd: remove duplicated include from amd_iommu_init.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-13Merge commit 'v3.6-rc5' into nextBjorn Helgaas
* commit 'v3.6-rc5': (1098 commits) Linux 3.6-rc5 HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured Remove user-triggerable BUG from mpol_to_str xen/pciback: Fix proper FLR steps. uml: fix compile error in deliver_alarm() dj: memory scribble in logi_dj Fix order of arguments to compat_put_time[spec|val] xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory. powerpc: Don't use __put_user() in patch_instruction powerpc: Make sure IPI handlers see data written by IPI senders powerpc: Restore correct DSCR in context switch powerpc: Fix DSCR inheritance in copy_thread() powerpc: Keep thread.dscr and thread.dscr_inherit in sync powerpc: Update DSCR on all CPUs when writing sysfs dscr_default powerpc/powernv: Always go into nap mode when CPU is offline powerpc: Give hypervisor decrementer interrupts their own handler powerpc/vphn: Fix arch_update_cpu_topology() return value ARM: gemini: fix the gemini build ... Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/rapidio/devices/tsi721.c
2012-08-23PCI: Introduce pci_pcie_type(dev) to replace pci_dev->pcie_typeYijing Wang
Introduce an inline function pci_pcie_type(dev) to extract PCIe device type from pci_dev->pcie_flags_reg field, and prepare for removing pci_dev->pcie_type. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-10iommu/amd: Fix wrong check for ARRAY_SIZE()Joerg Roedel
The check in the for-loop is broken. Fix it and the boot-crash it causes in AMD IOMMUv2 systems. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-08-10irq_remap: disable IRQ remapping if any IOAPIC lacks an IOMMUSeth Forshee
The ACPI tables in the Macbook Air 5,1 define a single IOAPIC with id 2, but the only remapping unit described in the DMAR table matches id 0. Interrupt remapping fails as a result, and the kernel panics with the message "timer doesn't work through Interrupt-remapped IO-APIC." To fix this, check each IOAPIC for a corresponding IOMMU. If an IOMMU is not found, do not allow IRQ remapping to be enabled. v2: Move check to parse_ioapics_under_ir(), raise log level to KERN_ERR, and add FW_BUG to the log message v3: Skip check if IOMMU doesn't support interrupt remapping and remove existing check that the IOMMU count equals the IOAPIC count Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-08-06iommu/amd: Fix ACS path checkingAlex Williamson
SR-IOV can create buses without a bridge. There may be other cases where this happens as well. In these cases skip to the parent bus and continue testing devices there. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-08-06iommu/intel: Fix ACS path checkingAlex Williamson
SR-IOV can create buses without a bridge. There may be other cases where this happens as well. In these cases skip to the parent bus and continue testing devices there. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-08-06iommu/amd: Fix pci_request_acs() call-placeJoerg Roedel
The pci_request_acs() function needs to be called before PCI probing to be effective. So move it to another call-place to ensure that. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-08-03iommu/tegra: smmu: debugfs for TLB/PTC statisticsHiroshi Doyu
Add debugfs entries to collect TLB/PTC statistics. $ echo "reset" > /sys/kernel/debug/smmu/mc/{tlb,ptc} $ echo "on" > /sys/kernel/debug/smmu/mc/{tlb,ptc} $ echo "off" > /sys/kernel/debug/smmu/mc/{tlb,ptc} $ cat /sys/kernel/debug/smmu/mc/{tlb,ptc} hit:0014910c miss:00014d22 The above format is: hit:<HIT count><SPC>miss:<MISS count><SPC><CR+LF> fscanf(fp, "hit:%lx miss:%lx", &hit, &miss); Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
generated by cgit v0.10.2 at 2024-08-18 13:55:24 (GMT)