summaryrefslogtreecommitdiff
path: root/drivers/kvm
AgeCommit message (Collapse)Author
2007-11-27KVM: SVM: Fix FPU leak while emulating cltsAmit Shah
The clts code didn't use set_cr0 properly, so our lazy FPU processing wasn't being done by the clts instruction at all. (this isn't called on Intel as the hardware does the decode for us) Signed-off-by: Amit Shah <amit.shah@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-11-27KVM: SVM: Unload guest fpu on vcpu_put()Avi Kivity
Not unloading the guest fpu can cause fpu leaks from guest to guest (or host to guest). Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-11-27KVM: x86 emulator: Use emulator_write_emulated and not emulator_write_stdAmit Shah
emulator_write_std() is not implemented, and calling write_emulated should work just as well in place of write_std. Fixes emulator failures with the push r/m instruction. Signed-off-by: Amit Shah <amit.shah@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-11-27KVM: x86 emulator: fix the saving of of the eip valueIzik Eidus
this make sure that no matter what is the operand size, all the value of the eip will be saved Signed-off-by: Izik Eidus <izike@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-11-27KVM: x86 emulator: fix JMP_RELIzik Eidus
Change JMP_REL to call to register_address_increment(): the operands size should not effect the calculation of the eip, instead the ad_bytes should affect it. Signed-off-by: Izik Eidus <izike@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-11-08KVM: SVM: Intercept the 'invd' and 'wbinvd' instructionsAvi Kivity
'invd' can destroy host data, and 'wbinvd' allows the guest to induce long (milliseconds) latencies. Noted by Ben Serebrin. Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-11-08KVM: x86 emulator: invd instructionAvi Kivity
Emulate the 'invd' instruction (opcode 0f 08). Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-11-08KVM: SVM: Defer nmi processing until switch to host state is completeAvi Kivity
If we stgi() too soon, nmis can reach the processor even though interrupts are disabled, catching it in a half-switched state. Delay the stgi() until we're done switching. Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-11-08KVM: SVM: Fix SMP with kernel apicAvi Kivity
AP processor needs to reset to the SIPI vector, not normal INIT. Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-11-08KVM: x86 emulator: fix 'push imm8' emulationAvi Kivity
'push imm8' found itself in the wrong switch somehow, so it is never executed. This fixes Windows 2003 installation. Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-23Consolidate host virtualization support under Virtualization menuRusty Russell
Move lguest under the virtualization menu. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Avi Kivity <avi@qumranet.com>
2007-10-22KVM: Use new smp_call_function_mask() in kvm_flush_remote_tlbs()Laurent Vivier
In kvm_flush_remote_tlbs(), replace a loop using smp_call_function_single() by a single call to smp_call_function_mask() (which is new for x86_64). Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-22KVM: Improve local apic timer wraparound handlingKevin Pedretti
Better handle wrap-around cases when reading the APIC CCR (current count register). Also, if ICR is 0, CCR should also be 0... previously reading CCR before setting ICR would result in a large kinda-random number. Signed-off-by: Kevin Pedretti <kevin.pedretti@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-22KVM: Fix local apic timer divide by zeroKevin Pedretti
kvm_lapic_reset() was initializing apic->timer.divide_count to 0, which could potentially lead to a divide by zero error in apic_get_tmcct(). Any guest that reads the APIC's CCR (current count) register before setting DCR (divide configuration) would trigger a divide by zero exception in the host kernel, leading to a host-OS crash. This patch results in apic->timer.divide_count being initialized to 2 at reset, eliminating the bug (DCR=0 at reset, meaning divide by 2). Signed-off-by: Kevin Pedretti <kevin.pedretti@gmail.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-22KVM: Move kvm_guest_exit() after local_irq_enable()Laurent Vivier
We need to make sure that the timer interrupt happens before we clear PF_VCPU, so the accounting code actually sees guest mode. http://lkml.org/lkml/2007/10/15/114 Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-22KVM: x86 emulator: fix access registers for instructions with ModR/M byte ↵Aurelien Jarno
and Mod = 3 The patch belows changes the access type to register from memory for instructions that are declared as SrcMem or DstMem, but have a ModR/M byte with Mod = 3. It fixes (at least) the lmsw and smsw instructions on an AMD64 CPU, which are needed for FreeBSD. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-22KVM: VMX: Force vm86 mode if setting flags during real modeAvi Kivity
When resetting from userspace, we need to handle the flags being cleared even after we are in real mode. Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-22KVM: x86 emulator: implement 'movnti mem, reg'Sheng Yang
Implement emulation of instruction: movnti m32/m64, r32/r64 opcode: 0x0f 0xc3 Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-22KVM: VMX: Reset mmu context when entering real modeEddie Dong
Resetting an SMP guest will force AP enter real mode (RESET) with paging enabled in protected mode. While current enter_rmode() can only handle mode switch from nonpaging mode to real mode which leads to SMP reboot failure. Fix by reloading the mmu context on entering real mode. Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Qing He <qing.he@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-22KVM: VMX: Handle NMIs before enabling interrupts and preemptionAvi Kivity
This makes sure we handle NMI on the current cpu, and that we don't service maskable interrupts before non-maskable ones. Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-22KVM: MMU: Set shadow pte atomically in mmu_pte_write_zap_pte()Izik Eidus
Setting shadow page table entry should be set atomicly using set_shadow_pte(). Signed-off-by: Izik Eidus <izike@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-22KVM: x86 emulator: fix repne/repnz decodingLaurent Vivier
The repnz/repne instructions must set rep_prefix to 1 like rep/repe/repz. This patch correct the disk probe problem met with OpenBSD. This issue appears with commit e70669abd4e60dfea3ac1639848e20e2b8dd1255 because before it, the decoding was done internally to kvm and after it is done by x86_emulate.c (which doesn't do it correctly). Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-22KVM: x86 emulator: fix merge screwup due to emulator splitNitin A Kamble
This code has gone to wrong place in the file. Moving it back to right location. Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-15sched: guest CPU accounting: maintain guest state in KVMLaurent Vivier
Modify KVM to update guest time accounting. [ mingo@elte.hu: ported to 2.6.24 KVM. ] Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Acked-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-13KVM: Skip pio instruction when it is emulated, not executedAvi Kivity
If we defer updating rip until pio instructions are executed, we have a problem with reset: a pio reset updates rip, and when the instruction completes we skip the emulated instruction, pointing rip somewhere completely unrelated. Fix by updating rip when we see decode the instruction, not after emulation. Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: x86 emulator: popfNitin A Kamble
Implement emulation of instruction: popf opcode: 0x9d Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: x86 emulator: fix src, dst value initializationNitin A Kamble
Some operand fetches are less than the machine word size and can result in stale bits if used together with operands of different sizes. Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: x86 emulator: jmp absNitin A Kamble
Implement emulation of instruction: jump absolute r/m opcode: 0xff /4 Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: x86 emulator: leaNitin A Kamble
Implement emulation of instruction lea r16/r32, m opcode: 0x8d: Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: X86 emulator: jump conditional shortNitin A Kamble
Implement emulation of more jump conditional instructions jcc shortrel opcodes: 0x70 - 0x7f Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: x86 emulator: imlpement jump conditional relativeNitin A Kamble
Implement emulation of instruction: jump conditional rel opcodes: 0x0f 0x80 - 0x0f 0x8f Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: x86 emulator: sort opcodes into ascending orderNitin A Kamble
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Improve emulation failure reportingAvi Kivity
Report failed opcodes from all locations. Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: x86 emulator: pushfNitin A Kamble
Implement emulation of instruction pushf opcode: 0x9c Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: x86 emulator: call nearNitin A Kamble
Implement emulation of instruction opcode: 0xe8 call (near) Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: x86 emulator: push imm8Nitin A Kamble
Implement the instruction push imm8 opcode: 0x6a Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: VMX: Fix exit qualification width on i386He, Qing
According to Intel Software Developer's Manual, Vol. 3B, Appendix H.4.2, exit qualification should be of natural width. However, current code uses u64 as the data type for this register, which occasionally introduces invalid value to VMExit handling logics. This patch fixes this bug. I have tested Windows and Linux guest on i386 host, and they can boot successfully with this patch. Signed-off-by: Qing He <qing.he@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Move main vcpu loop into subarch independent codeAvi Kivity
This simplifies adding new code as well as reducing overall code size. Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: VMX: Move vm entry failure handling to the exit handlerAvi Kivity
This will help moving the main loop to subarch independent code. Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: MMU: Don't do GFP_NOWAIT allocationsAvi Kivity
Before preempt notifiers, kvm needed to allocate memory with GFP_NOWAIT so as not to have to enable preemption and take a heavyweight exit. On oom, we'd fall back to a GFP_KERNEL allocation. With preemption notifiers, we can do a GFP_KERNEL allocation, and perform the heavyweight exit only if the kernel decides to put us to sleep. Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Rename kvm_arch_ops to kvm_x86_opsChristian Ehrhardt
This patch just renames the current (misnamed) _arch namings to _x86 to ensure better readability when a real arch layer takes place. Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Simplify memory allocationLaurent Vivier
The mutex->splinlock convertion alllows us to make some code simplifications. As we can keep the lock longer, we don't have to release it and then have to check if the environment has not been modified before re-taking it. We can remove kvm->busy and kvm->memory_config_version. Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Hoist SVM's get_cs_db_l_bits into core code.Rusty Russell
SVM gets the DB and L bits for the cs by decoding the segment. This is in fact the completely generic code, so hoist it for kvm-lite to use. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Keep control regs in syncRusty Russell
We don't update the vcpu control registers in various places. We should do so. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Clean up unloved invlpg emulationRusty Russell
invlpg shouldn't fetch the "src" address, since it may not be valid, however SVM's "solution" which neuters emulation of all group 7 instruction is horrible and breaks kvm-lite. The simplest fix is to put a special check in for invlpg. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Remove the unused invlpg member of struct kvm_arch_ops.Rusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Set the ET flag in CR0 after initializing FXAmit Shah
This was missed when moving stuff around in fbc4f2e Fixes Solaris guests and bug #1773613 Signed-off-by: Amit Shah <amit.shah@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: enable in-kernel APIC INIT/SIPI handlingHe, Qing
This patch enables INIT/SIPI handling using in-kernel APIC by introducing a ->mp_state field to emulate the SMP state transition. [avi: remove smp_processor_id() warning] Signed-off-by: Qing He <qing.he@intel.com> Signed-off-by: Xin Li <xin.b.li@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: round robin for APIC lowest priority delivery modeHe, Qing
Signed-off-by: Qing He <qing.he@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: deliver PIC interrupt only to vcpu0Qing He
This patch changes the PIC interrupts delivery. Now it is only delivered to vcpu0 when either condition is met (on vcpu0): 1. local APIC is hardware disabled 2. LVT0 is unmasked and configured to delivery mode ExtInt It fixes the 2x faster wall clock on x86_64 and SMP i386 Linux guests Signed-off-by: Eddie (Yaozu) Dong <eddie.dong@intel.com> Signed-off-by: Qing He <qing.he@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
generated by cgit v0.10.2 at 2024-11-01 13:40:29 (GMT)