summaryrefslogtreecommitdiff
path: root/drivers/md/dm-kcopyd.c
AgeCommit message (Collapse)Author
2011-10-31dm kcopyd: add dm_kcopyd_zero to zero an areaMikulas Patocka
This patch introduces dm_kcopyd_zero() to make it easy to use kcopyd to write zeros into the requested areas instead instead of copying. It is implemented by passing a NULL copying source to dm_kcopyd_copy(). The forthcoming thin provisioning target uses this. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-10-23dm kcopyd: fix job_pool leakAlasdair G Kergon
Fix memory leak introduced by commit a6e50b409d3f9e0833e69c3c9cca822e8fa4adbb (dm snapshot: skip reading origin when overwriting complete chunk). When allocating a set of jobs from kc->job_pool, job->master_job must be set (to point to itself) so that the mempool item gets freed when the master_job completes. master_job was introduced by commit c6ea41fbbe08f270a8edef99dc369faf809d1bd6 (dm kcopyd: preallocate sub jobs to avoid deadlock) Reported-by: Michael Leun <ml@newton.leun.net> Cc: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm snapshot: skip reading origin when overwriting complete chunkMikulas Patocka
If we write a full chunk in the snapshot, skip reading the origin device because the whole chunk will be overwritten anyway. This patch changes the snapshot write logic when a full chunk is written. In this case: 1. allocate the exception 2. dispatch the bio (but don't report the bio completion to device mapper) 3. write the exception record 4. report bio completed Callbacks must be done through the kcopyd thread, because callbacks must not race with each other. So we create two new functions: dm_kcopyd_prepare_callback: allocate a job structure and prepare the callback. (This function must not be called from interrupt context.) dm_kcopyd_do_callback: submit callback. (This function may be called from interrupt context.) Performance test (on snapshots with 4k chunk size): without the patch: non-direct-io sequential write (dd): 17.7MB/s direct-io sequential write (dd): 20.9MB/s non-direct-io random write (mkfs.ext2): 0.44s with the patch: non-direct-io sequential write (dd): 26.5MB/s direct-io sequential write (dd): 33.2MB/s non-direct-io random write (mkfs.ext2): 0.27s Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm kcopyd: remove nr_pages field from job structureMikulas Patocka
The nr_pages field in struct kcopyd_job is only used temporarily in run_pages_job() to count the number of required pages. We can use a local variable instead. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-08-02dm kcopyd: remove offset field from job structureMikulas Patocka
The offset field in struct kcopyd_job is always zero so remove it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-29dm kcopyd: return client directly and not through a pointerMikulas Patocka
Return client directly from dm_kcopyd_client_create, not through a parameter, making it consistent with dm_io_client_create. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29dm kcopyd: reserve fewer pagesMikulas Patocka
Reserve just the minimum of pages needed to process one job. Because we allocate pages from page allocator, we don't need to reserve a large number of pages. The maximum job size is SUB_JOB_SIZE and we calculate the number of reserved pages based on this. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29dm io: use fixed initial mempool sizeMikulas Patocka
Replace the arbitrary calculation of an initial io struct mempool size with a constant. The code calculated the number of reserved structures based on the request size and used a "magic" multiplication constant of 4. This patch changes it to reserve a fixed number - itself still chosen quite arbitrarily. Further testing might show if there is a better number to choose. Note that if there is no memory pressure, we can still allocate an arbitrary number of "struct io" structures. One structure is enough to process the whole request. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29dm kcopyd: alloc pages from the main page allocatorMikulas Patocka
This patch changes dm-kcopyd so that it allocates pages from the main page allocator with __GFP_NOWARN | __GFP_NORETRY flags (so that it can fail in case of memory pressure). If the allocation fails, dm-kcopyd allocates pages from its own reserve. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29dm kcopyd: add gfp parm to alloc_plMikulas Patocka
Introduce a parameter for gfp flags to alloc_pl() for use in following patches. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29dm kcopyd: remove superfluous page allocation spinlockMikulas Patocka
Remove the spinlock protecting the pages allocation. The spinlock is only taken on initialization or from single-threaded workqueue. Therefore, the spinlock is useless. The spinlock is taken in kcopyd_get_pages and kcopyd_put_pages. kcopyd_get_pages is only called from run_pages_job, which is only called from process_jobs called from do_work. kcopyd_put_pages is called from client_alloc_pages (which is initialization function) or from run_complete_job. run_complete_job is only called from process_jobs called from do_work. Another spinlock, kc->job_lock is taken each time someone pushes or pops some work for the worker thread. Once we take kc->job_lock, we guarantee that any written memory is visible to the other CPUs. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29dm kcopyd: preallocate sub jobs to avoid deadlockMikulas Patocka
There's a possible theoretical deadlock in dm-kcopyd because multiple allocations from the same mempool are required to finish a request. Avoid this by preallocating sub jobs. There is a mempool of 512 entries. Each request requires up to 9 entries from the mempool. If we have at least 57 concurrent requests running, the mempool may overflow and mempool allocations may start blocking until another entry is freed to the mempool. Because the same thread is used to free entries to the mempool and allocate entries from the mempool, this may result in a deadlock. This patch changes it so that one mempool entry contains all 9 "struct kcopyd_job" required to fulfill the whole request. The allocation is done only once in dm_kcopyd_copy and no further mempool allocations are done during request processing. If dm_kcopyd_copy is not run in the completion thread, this implementation is deadlock-free. MIN_JOBS needs reducing accordingly and we've chosen to reduce it further to 8. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-05-29dm kcopyd: avoid pointless job splittingMikulas Patocka
Don't split SUB_JOB_SIZE jobs If the job size equals SUB_JOB_SIZE, there is no point in splitting it. Splitting it just unnecessarily wastes time, because the split job size is SUB_JOB_SIZE too. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-03-10block: kill off REQ_UNPLUGJens Axboe
With the plugging now being explicitly controlled by the submitter, callers need not pass down unplugging hints to the block layer. If they want to unplug, it's because they manually plugged on their own - in which case, they should just unplug at will. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10block: remove per-queue pluggingJens Axboe
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-13dm: use non reentrant workqueues if equivalentTejun Heo
kmirrord_wq, kcopyd_work and md->wq are created per dm instance and serve only a single work item from the dm instance, so non-reentrant workqueues would provide the same ordering guarantees as ordered ones while allowing CPU affinity and use of the workqueues for other purposes. Switch them to non-reentrant workqueues. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13dm: convert workqueues to alloc_orderedTejun Heo
Convert all create[_singlethread]_work() users to the new alloc[_ordered]_workqueue(). This conversion is mechanical and doesn't introduce any behavior change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13dm kcopyd: delay unpluggingMikulas Patocka
Make kcopyd merge more I/O requests by using device unplugging. Without this patch, each I/O request is dispatched separately to the device. If the device supports tagged queuing, there are many small requests sent to the device. To improve performance, this patch will batch as many requests as possible, allowing the queue to merge consecutive requests, and send them to the device at once. In my tests (15k SCSI disk), this patch improves sequential write throughput: Sequential write throughput (chunksize of 4k, 32k, 512k) unpatched: 15.2, 18.5, 17.5 MB/s patched: 14.4, 22.6, 23.0 MB/s In most common uses (snapshot or two-way mirror), kcopyd is only used for two devices, one for reading and the other for writing, thus this optimization is implemented only for two devices. The optimization may be extended to n-way mirrors with some code complexity increase. We keep track of two block devices to unplug (one for read and the other for write) and unplug them when exiting "do_work" thread. If there are more devices used (in theory it could happen, in practice it is rare), we unplug immediately. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13dm io: remove BIO_RW_SYNCIO flag from kcopydMikulas Patocka
Remove the REQ_SYNC flag to improve write throughput when writing to the origin with a snapshot on the same device (using the CFQ I/O scheduler). Sequential write throughput (chunksize of 4k, 32k, 512k) unpatched: 8.5, 8.6, 9.3 MB/s patched: 15.2, 18.5, 17.5 MB/s Snapshot exception reallocations are triggered by writes that are usually async, so mark the associated dm_io_request as async as well. This helps when using the CFQ I/O scheduler because it has separate queues for sync and async I/O. Async is optimized for throughput; sync for latency. With this change we're consciously favoring throughput over latency. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-07block: unify flags for struct bio and struct requestChristoph Hellwig
Remove the current bio flags and reuse the request flags for the bio, too. This allows to more easily trace the type of I/O from the filesystem down to the block driver. There were two flags in the bio that were missing in the requests: BIO_RW_UNPLUG and BIO_RW_AHEAD. Also I've renamed two request flags that had a superflous RW in them. Note that the flags are in bio.h despite having the REQ_ name - as blkdev.h includes bio.h that is the only way to go for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2009-12-10dm kcopyd: accept zero size jobsMikulas Patocka
dm-kcopyd: accept zero-size jobs This patch changes dm-kcopyd so that it accepts zero-size jobs and completes them immediatelly via its completion thread. It is needed for multisnapshots snapshot resizing. When we are writing to a chunk beyond origin end, no copying is done. To simplify the code, we submit an empty request to kcopyd and let kcopyd complete it. If we didn't submit a request to kcopyd and called the completion routine immediatelly, it would violate the principle that completion is called only from one thread and it would need additional locking. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-08dm kcopyd: fix callback raceMikulas Patocka
If the thread calling dm_kcopyd_copy is delayed due to scheduling inside split_job/segment_complete and the subjobs complete before the loop in split_job completes, the kcopyd callback could be invoked from the thread that called dm_kcopyd_copy instead of the kcopyd workqueue. dm_kcopyd_copy -> split_job -> segment_complete -> job->fn() Snapshots depend on the fact that callbacks are called from the singlethreaded kcopyd workqueue and expect that there is no racing between individual callbacks. The racing between callbacks can lead to corruption of exception store and it can also mean that exception store callbacks are called twice for the same exception - a likely reason for crashes reported inside pending_complete() / remove_exception(). This patch fixes two problems: 1. job->fn being called from the thread that submitted the job (see above). - Fix: hand over the completion callback to the kcopyd thread. 2. job->fn(read_err, write_err, job->context); in segment_complete reports the error of the last subjob, not the union of all errors. - Fix: pass job->write_err to the callback to report all error bits (it is done already in run_complete_job) Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-08dm kcopyd: prepare for callback race fixMikulas Patocka
Use a variable in segment_complete() to point to the dm_kcopyd_client struct and only release job->pages in run_complete_job() if any are defined. These changes are needed by the next patch. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-02-18block: fix bad definition of BIO_RW_SYNCJens Axboe
We can't OR shift values, so get rid of BIO_RW_SYNC and use BIO_RW_SYNCIO and BIO_RW_UNPLUG explicitly. This brings back the behaviour from before 213d9417fec62ef4c3675621b9364a667954d4dd. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-21dm: remove dm header from targetsMikulas Patocka
Change #include "dm.h" to #include <linux/device-mapper.h> in all targets. Targets should not need direct access to internal DM structures. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21dm kcopyd: avoid queue shuffleKazuo Ito
Write throughput to LVM snapshot origin volume is an order of magnitude slower than those to LV without snapshots or snapshot target volumes, especially in the case of sequential writes with O_SYNC on. The following patch originally written by Kevin Jamieson and Jan Blunck and slightly modified for the current RCs by myself tries to improve the performance by modifying the behaviour of kcopyd, so that it pushes back an I/O job to the head of the job queue instead of the tail as process_jobs() currently does when it has to wait for free pages. This way, write requests aren't shuffled to cause extra seeks. I tested the patch against 2.6.27-rc5 and got the following results. The test is a dd command writing to snapshot origin followed by fsync to the file just created/updated. A couple of filesystem benchmarks gave me similar results in case of sequential writes, while random writes didn't suffer much. dd if=/dev/zero of=<somewhere on snapshot origin> bs=4096 count=... [conv=notrunc when updating] 1) linux 2.6.27-rc5 without the patch, write to snapshot origin, average throughput (MB/s) 10M 100M 1000M create,dd 511.46 610.72 11.81 create,dd+fsync 7.10 6.77 8.13 update,dd 431.63 917.41 12.75 update,dd+fsync 7.79 7.43 8.12 compared with write throughput to LV without any snapshots, all dd+fsync and 1000 MiB writes perform very poorly. 10M 100M 1000M create,dd 555.03 608.98 123.29 create,dd+fsync 114.27 72.78 76.65 update,dd 152.34 1267.27 124.04 update,dd+fsync 130.56 77.81 77.84 2) linux 2.6.27-rc5 with the patch, write to snapshot origin, average throughput (MB/s) 10M 100M 1000M create,dd 537.06 589.44 46.21 create,dd+fsync 31.63 29.19 29.23 update,dd 487.59 897.65 37.76 update,dd+fsync 34.12 30.07 26.85 Although still not on par with plain LV performance - cannot be avoided because it's copy on write anyway - this simple patch successfully improves throughtput of dd+fsync while not affecting the rest. Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Kazuo Ito <ito.kazuo@oss.ntt.co.jp> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: stable@kernel.org
2008-04-25dm: unplug queues in threadsMikulas Patocka
Remove an avoidable 3ms delay on some dm-raid1 and kcopyd I/O. It is specified that any submitted bio without BIO_RW_SYNC flag may plug the queue (i.e. block the requests from being dispatched to the physical device). The queue is unplugged when the caller calls blk_unplug() function. Usually, the sequence is that someone calls submit_bh to submit IO on a buffer. The IO plugs the queue and waits (to be possibly joined with other adjacent bios). Then, when the caller calls wait_on_buffer(), it unplugs the queue and submits the IOs to the disk. This was happenning: When doing O_SYNC writes, function fsync_buffers_list() submits a list of bios to dm_raid1, the bios are added to dm_raid1 write queue and kmirrord is woken up. fsync_buffers_list() calls wait_on_buffer(). That unplugs the queue, but there are no bios on the device queue as they are still in the dm_raid1 queue. wait_on_buffer() starts waiting until the IO is finished. kmirrord is scheduled, kmirrord takes bios and submits them to the devices. The submitted bio plugs the harddisk queue but there is no one to unplug it. (The process that called wait_on_buffer() is already sleeping.) So there is a 3ms timeout, after which the queues on the harddisks are unplugged and requests are processed. This 3ms timeout meant that in certain workloads (e.g. O_SYNC, 8kb writes), dm-raid1 is 10 times slower than md raid1. Every time we submit something asynchronously via dm_io, we must unplug the queue actually to send the request to the device. This patch adds an unplug call to kmirrord - while processing requests, it keeps the queue plugged (so that adjacent bios can be merged); when it finishes processing all the bios, it unplugs the queue to submit the bios. It also fixes kcopyd which has the same potential problem. All kcopyd requests are submitted with BIO_RW_SYNC. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Acked-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-25dm: move include filesAlasdair G Kergon
Publish the dm-io, dm-log and dm-kcopyd headers in include/linux. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-04-25dm kcopyd: renameAlasdair G Kergon
Rename kcopyd.[ch] to dm-kcopyd.[ch]. Signed-off-by: Alasdair G Kergon <agk@redhat.com>