summaryrefslogtreecommitdiff
path: root/drivers/media/dvb/frontends
AgeCommit message (Collapse)Author
2009-12-05V4L/DVB (13521): dib8000: fix compile warningHans Verkuil
Trivial fix for this bogus compile warning: v4l/dib8000.c:958: warning: 'ncoeff' may be used uninitialized in this function Note: ncoeff is never used uninitialized, but the compiler couldn't figure that out. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13493): TeVii S470 and TBS 6920 fixesIgor M. Liplianin
The new hardware design applied for this cards. Silicon Labs C8051F300 microcontroller is used for LNB power control. It connected to cx23885 GPIO pins: GPIO0 - P0.3 data GPIO1 - P0.2 reset GPIO2 - P0.1 clk GPIO3 - P0.0 busy Tevii S470 based on Montage Technology M88TS2020 digital satellite tuner and M88DS3000 advanced DVB-S/S2 demodulator. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13480): atbm8830: fix compile warningHans Verkuil
Fix this trivial compile warning: v4l/atbm8830.c:164: warning: 'set_agc_config' defined but not used Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13407): Add Prof 7301 PCI DVB-S2 cardIgor M. Liplianin
Add Prof 7301 PCI DVB-S2 card The card based on stv0903 demod, stb6100 tuner. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13374): AltoBeam ATBM8830 GB20600-2006(DMB-TH) demodulatorDavid T.L. Wong
Adds support for Maxim MAX2165 silicon tuner. It was tested on Mygica X8558Pro, which has MAX2165, ATBM8830 and CX23885. Signed-off-by: David T. L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13363): ec100: add new driver for E3C EC100 DVB-T demodulatorAntti Palosaari
E3C EC100 DVB-T demodulator driver Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13360): stv090x: fix the calculation of the r divider in ↵Andreas Regel
stv6110x_set_frequency It had always the value 3 no matter what frequency was given. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13359): stv090x: adds corrections of some register valuesAndreas Regel
While here, also do some blind scan related fixes. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13358): stv090x: add an additional check for packet delineator lock ↵Andreas Regel
in stv090x_read_status in case of a tuned DVB-S2 signal Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13357): stv090x: adds an additional check for signal presence based ↵Andreas Regel
on AGC1 Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13356): stv090x: fixes signal lock logicAndreas Regel
This patch contains several fixes for the stv090x driver: - added missing else - use calculated timeout instead of fixed one - use correct frequency when doing zigzag scan - added missing read of GENCFG register Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13355): stv090x: fixes calculation of AGC2 and uses a different ↵Andreas Regel
AGC2 threshold for cut 3 chips Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13354): stv090x: fixes some typos like wrong register or variable namesAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13353): stv090x: fixes STR and SNR calculation and normalizes the ↵Andreas Regel
value into the 0..0xFFFF range Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13352): stv090x: fixes errors and typos in register definitionsAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13351): stv090x: increases search range based on symbol rateAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13341): stv0900: big rework to support cut 3.0.Igor M. Liplianin
Patch 4 of 4. Also patch changes logic to prevent code repetitions and big indents. It makes checkpatch silent :) Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13340): stv0900: big rework to support cut 3.0.Igor M. Liplianin
Patch 3 of 4. Also patch changes logic to prevent code repetitions and big indents. It makes checkpatch silent :) Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13339): stv0900: big rework to support cut 3.0.Igor M. Liplianin
Patch 2 of 4. Also patch changes logic to prevent code repetitions and big indents. It makes checkpatch silent :) Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13338): stv0900: big rework to support cut 3.0.Igor M. Liplianin
Patch 1 of 4. Also patch changes logic to prevent code repetitions and big indents. It makes checkpatch silent :) Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13337): Change str snr scale for stv0900/903 and Netup Dual DVB-S2 ↵Igor M. Liplianin
card. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13336): stv0900: config definition for single/dual modeIgor M. Liplianin
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13335): stv0900: fix diseqc support for NetUP cardAbylay Ospan
Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13334): stv6110: add configurable gainAbylay Ospan
It has positive effect for NetUP Dual DVB-S2 CI card. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13332): s5h1409: remove a set register that would cause lock to be ↵Devin Heitmueller
lost. On particularly weak signals, changing register 0xab after setting the interleave mode will cause the FEC lock to get lost (while still holding the EQ lock). So remove the write entirely, which seems to have had no adverse effect in either of my ClearQAM environments (and in particular resolves the customer's reported issue). Also flip around the order of the amhum optimization and the interleave setup to be consistent with the windows driver, which has the side-benefit of doing them both in the same call (since the amhum optimization can only be done once the interleave setup). This work was sponsored by ONELAN Limited. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13330): s5h1409: properly handle QAM optimization after lock achievedDevin Heitmueller
The sh51409 driver was only doing the QAM optimization a single time, and it would only occur if you received a lock instantaneously after the tuning request. Restructure the code so that the optimization occurs once you reach a signal lock. Note that this depends on the caller polling for status, but we don't have much choice at this point without an independent thread monitoring the lock status. Also, at this point pretty much every application polls for status lock after doing the tune, so the likelihood of the optimization not occurring in the real world is pretty low. The state machine has also been reworked such that setting the interleave mode is now a dependency of doing the QAM optimization. Before both were mutually exclusive, which was not consistent with the Windows driver. We now have a single state machine that controls both. The changes as-is are only enabled for the HVR-1600. Once the changes are tested with some of the other boards, this change should be made generic and the "_legacy" functions should be removed. This work was sponsored by ONELAN Limited. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13329): s5h1409: provide HVR-1600 specific optimizationsDevin Heitmueller
Perform some optimization of the register configuration based on a trace of the HVR-1600 Windows i2c traffic (and consultation with Steven Toth). Note that some of these values may be able to be moved into the common driver, but I am holding off on that until they can be tested with other boards. This work was sponsored by ONELAN Limited. Cc: Steven Toth <stoth@kernellabs.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13212): fix gcc-4.3.3 compilation error at dib7000p_pid_filter(): ↵David T.L. Wong
missing parameter name Signed-off-by: David T.L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13187): au8522: add support for saturation and hue controlsDevin Heitmueller
Add support for saturation/hue controls, prompted by errors showing up in the mythbackend log. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13051): DiB7000P: improve rebostness of HAS_LOCK indicatorOlivier Grenie
Update the dib7000p: The status is HAS_LOCK only if the demod is able to decode the TPS. Sometimes, there is a TPS data lock, even if the demod is not able to decode it (ex: no RF signal). For the STK7770P: correct value for the charge pump Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13049): dib8000: SNR in 10th of dBOlivier Grenie
dib7000p/dib8000: added pid filtering dib8000: the SNR is in 10th of dB (not in dB) dib7000p and dib8000: added the pid filtering. This feature is enabled by module option (dvb-usb module). Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13045): Fix debug messaging for stv0900 demod.Igor M. Liplianin
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-11-07V4L/DVB (13079): dib0700: fixed xc2028 firmware loading kernel oopsMartin Samek
Fixing kernel oops when driver attemps to load xc2028 firmware. Note by djh: the patch contribute by Martin is a port of a fix I made during the PCTV 340e development. It's a temporary workaround that fixes a regression (an OOPS condition) and the real fix should be in the code that manages the i2c master on the dib7000p. But this fix does address the immmediate regression and should be merged upstream until we do a cleaner fix. Signed-off-by: Martin Samek <martin@marsark.sytes.net> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-11-07V4L/DVB (13048): dib0070: fix build dependency when driver is disabledMichael Krufky
Fix build dependency on function, dib0070_ctrl_agc_filter [mchehab@redhat.com: reverted the quick workaround 3f48258e50ef4] Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (13018): kzalloc failure ignored in au8522_probe()Roel Kluin
Prevent NULL dereference if kzalloc() fails. Cc: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (13016): kmalloc failure ignored in lgdt3304_attach() and s921_attach()Roel Kluin
Prevent NULL dereference if kmalloc() fails. Cc: Markus Rechberger <mrechberger@sundtek.de> Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12903): DiB8000: fix channel search parameter initializationPatrick Boettcher
This patch is fixing the initialization of the channel search parameters. Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12900): DiB8000: added support for DiBcom ISDB-T/ISDB-Tsb ↵Patrick Boettcher
demodulator DiB8000 This commit adds support for the DiB8000 ISDB-T demodulator made by DiBcom. Signed-off-by: Olivier Grenie <Olivier.Grenie@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12899): DiB0070: Indenting driver with indent -linuxPatrick Boettcher
In order to follow a little bit the kernel coding style from now on after the generation of that driver file and indent -linux call is emitted. Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12898): DiB0070: Update to latest internal releasePatrick Boettcher
General update of the dib0070-driver based on DiBcom's latest release. New driver features can enable better performance in some reception situations. Signed-off-by: Patrick Boettcher <Patrick.Boettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12887): DIB7000P: SNR calcuation forr DiB7000POlivier Grenie
Add the SNR monitoring for the dib7000p. The result is in dB. Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12575): Fix test of bandwidth range in cx22700_set_tps()Roel Kluin
For the bandwidth to be less than 8 MHZ and greater than 6 MHZ is logically impossible. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12485): zl10353: correct implementation of FE_READ_UNCORRECTED_BLOCKSAleksandr V. Piskunov
Makes zl10353 a bit more DVB API compliant: FE_READ_UNCORRECTED_BLOCKS - keep a counter of UNC blocks FE_GET_FRONTEND - return last set frequency instead of zero Signed-off-by: Aleksandr V. Piskunov <alexandr.v.piskunov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12483): Use DIV_ROUND_CLOSESTJulia Lawall
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12481): Fix lowband tuning with tda8261Julian Scheel
Attached is a patch which fixes tuning to low frequency channels with stb0899+tda8261 cards like the KNC TV-Station DVB-S2. The cause of the issue was a broken if construct, which should have been an if/else if, so that the setting for the lowest matching frequency is applied. Without this patch for example tuning to "arte" on Astra 19.2, 10744MHz SR22000 failed most times and when it failed the communication between driver and tda8261 was completely broken. This problem disappears with the attached patch. Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12461): Add ce5039(zl10039) tuner support.Igor M. Liplianin
The code from Jan D. Louw with some minor changes. http://article.gmane.org/gmane.linux.drivers.dvb/38163 Tested with TeVii S630 DVB-S USB card by me (Igor) Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12427): cx24113: fix mips compiler warningHans Verkuil
do_div requires an u64 as the first argument, not a s64. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12313): stv6110: Read registers through one time i2c_transfer callingIgor M. Liplianin
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12312): stv0900: fix i2c repeater configuration must be set to manualAbylay Ospan
In automatic mode every stop event on SDA line ends repetition. However, in NetUP Dual card on the same i2c bus we have several devices. If someone using both adapters to lock simultaneously or working with CAM interface during lock procedure, it lead to end repetition prematurely quite often. Set stv0900 i2c repeater to manual mode prevents such situation. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12310): stv6110 tuner: remove unused iq_wiring configuration parameter.Igor M. Liplianin
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v0.10.2 at 2024-10-12 19:54:16 (GMT)